Digital Commons Network^™

Comparative Assessment Of Uav-Based Tseb And Field-Calibrated Aquacrop For Evapotranspiration On The Arid Coast Of Peru, Roxana Peña-Amaro, José Huanuqueño-Murillo, Lia Ramos-Fernández, Abel Ramos-Ayala, David Quispe-Tito, Lena Cruz-Villacorta, Elizabeth Heros-Aguilar, Edwin Pino-Vargas, Alfonso Torres-Rua

Civil and Environmental Engineering Faculty Publications

Precise estimation of evapotranspiration (ET) is essential for sustainable water management in arid agroecosystems, particularly for high-water-demand crops such as rice. This study integrated very-high-resolution UAV thermal–multispectral imagery with a Two-Source Energy Balance model (UAV–TSEB) and a field-calibrated AquaCrop model to quantify daily ET and its components under continuous flooding on the arid Peruvian coast during the 2024–2025 season. A network of 24 drainage lysimeters provided an independent observational benchmark (ET_lys); to represent the treatment-level response, lysimeter observations were aggregated as the mean across the 24 units for each UAV campaign. Thirteen UAV surveys supplied radiometric surface temperature …

Selfhealth: Continuous Semantic Intelligence For Privacy-Aware Lifelogging, Allie Tran

Women+ in Early Career Research Symposium

Lifelogging — the continuous digital recording of everyday experience through wearable cameras and sensors — has long promised benefits for memory augmentation, health monitoring, and lifestyle analysis. However, current systems follow a capture–store–retrieve model that delays analysis until after data collection, limiting their practical usefulness and creating significant privacy risks through prolonged retention of sensitive raw data. This paper argues that lifelogging should instead analyse data at the moment of capture, enabling timely, context-sensitive support and safer handling of personal information through privacy-by-design. We demonstrate the feasibility of this approach through SelfHealth, an early prototype system built on a custom …

Physical And Chemical Study Of Interaction In The Urea–Valine System For The Creation Of Modified Liquid Nitrogen Fertilizers, Suvonkul Erkhanovich Nurmonov, Saydullo Khamidovich Azimov

Chemical Technology, Control and Management

This study reports the results of a comprehensive physicochemical investigation of the urea–L-valine binary system, conducted to validate its potential as a modified base for liquid nitrogen fertilizers.

By utilizing the methods of isomolar series, visual-polythermal analysis, X-ray phase (XRD) and single-crystal X-ray diffraction (SC-XRD), synchronous thermal analysis (TGA/DTA), and FT-IR spectroscopy, it was determined that the interaction between components in both aqueous solutions and the solid phase results in the formation of molecular associates stabilized by hydrogen bonds, without the formation of new stoichiometric compounds.

The concentration and temperature limits of the system's stability were defined, revealing a reduction …

Cultivation Of Arthrospira Platensis (Spirulina) In Food-Based Industrial Wastewater For High-Yield Phycocyanin Extraction, Pavithira Sathinathan

Student Works (2020-2029)

Arthrospira platensis (Spirulina) is a filamentous cyanobacterium valued for its nutritional profile, particularly the pigment–protein phycocyanin, with potent antioxidant and anti-inflammatory properties. Despite its industrial significance, large-scale commercialization remains constrained by high cultivation costs and inefficient extraction methods. This study investigated the use of food-based industrial wastewater as an alternative nutrient medium for Spirulina cultivation, aiming to reduce production costs, enhance phycocyanin yield, and support sustainable wastewater remediation. Three types of food-based wastewater with different nutrient composition (WW1, WW2, WW3) was diluted with Kosaric medium (1:1) and used for Spirulina cultivation. The highest biomass concentration was achieved in WW2 (1.93 …

Aurora – Autonomous Urban & Rural Optimization And Resilience Architecture, Ninad Pandit

Shelby Hall Graduate Research Forum Posters

Problem statement: Undetected systemic “leaks” within large-scale food distribution networks result in severe post-harvest perishable losses and critical nutrient degradation.

A Borophosphate Glass Doped With Cobalt Oxide Improves Skeletal Muscle Structure And Function In Myopathic Mice, Jacob A. Kendra, Alexandra G. Naman, Rebekah L. Blatt, Carla D. Zingariello, Richard K. Brow, Steven S. Segal, Aaron B. Morton

Materials Science and Engineering Faculty Research & Creative Works

Skeletal muscle myopathy remains a significant cause of disability with limited treatment strategies. Advancements in tissue engineering have led to the development of borophosphate bioactive glasses (BPBGs) capable of enhancing skeletal muscle structure and function. Using a mouse model of severe myopathy (D2.mdx), we investigated muscle force, regeneration, angiogenesis and inflammation at 14, 70 and 140 days post-treatment (dpt). Tibialis anterior (TA) muscles of D2.mdx mice that received a single injection of cobalt oxide-doped BPBG (CoO-TRIM) particles exhibit greater active force, myofiber size, and regeneration through 70 dpt compared to control D2.mdx mice injected with Saline. Vascular endothelial growth factor …

Emerging Trends In Photocatalyst-Based Metal-Organic Frameworks For Pfas Degradation, Ahmad Najafidoust, Roham Ghanbari, Javad Farahbakhsh, Ratish Permala, Stefan Iglauer, Masoumeh Zargar

Research outputs 2022 to 2026

Per- and polyfluoroalkyl substances (PFAS) are highly persistent pollutants in the environment that pose significant health hazards due to their strong chemical resilience and widespread industrial use. Traditional treatment techniques, such as adsorption and reverse osmosis, often struggle with drawbacks like high energy requirements and limited effectiveness against both short- and long-chain PFAS compounds. Among the innovative degradation methods, photocatalysis has gained attention as a viable solution, especially when coupled with metal-organic frameworks (MOFs). MOFs are particularly suited for this purpose due to their high surface area, customizable structures, and superior light absorption properties. This review highlights the latest developments …

A Comprehensive Review Of Food Waste Management In Attaining Sdg 12.3 Goals: Insights From Asian Countries, Ping Hu, Lotifa Tamanna Toma, Ashraful Alam, Md. Tanvir Ahmmed, Md. Jahidul Islam, Kazi Farhana, Marjia Sultana, Miraj Ahmed Bhuiyan

Civil and Environmental Engineering Faculty Publications and Presentations

Food waste is one of the most important world-wide challenges whose environmental, economic and social impacts have far-reaching effects that include contributing to greenhouse gas emissions, resources depletion as well as the rising levels of food insecurity. These problems are further intensified in Asia due to high rate of urbanization, population growth, changing dietary habits, and lack of waste management facilities. These conditions complicate the fact that countries are increasingly struggling to achieve the United Nations Sustainable Development Goal (SDG) 12.3, which is to ensure that by 2030, half of the world has dropped per-capita food waste, and food losses …

Mycelium-Based Composites Using Minimally Processed Industrial Hemp Biomass: Impact Of Species And Feedstock Ratio On Mechanical Performance Compared To Polystyrene Packaging, Radika Bhaskar, Tanisha Rutledge, Kevin Trangone, Oneal Latimore

School of Design and Engineering Papers

Mycelium-based composites (MBCs\) are formed from lignocellulosic substrates and biopolymer matrices derived from fungal mycelium. Due to their low fossil energy demand and biodegradability, MBCs represent a versatile and sustainable material suitable for a range of applications, with increasing interest focused on packaging. Hemp fibers are an example of natural fibers with great promise as a substrate to improve the mechanical properties of MBCs. However, the separation of bast and hurd fiber requires processing and commercial-scale facilities that are logistically challenging and may be cost-prohibitive. Here, the potential for minimally processed hemp, with no separation of fibers, is evaluated for …

Ai-Driven Stratified Modeling For Early Liver Disease Detection: A Comparative Study Of Ensemble And Conventional Machine Learning Classifiers, Ghadeer Murtadha Ali, Ali Aqeel Hadi, Mustafa Abdulkareem Abbas, Abdullah Alkarar Mohammad, Ahmed Fadhil Abdulhussein

AUIQ Technical Engineering Science

Background: Early prediction of liver disease remains challenging in routine clinical diagnostics due to the multifactorial nature of hepatic dysfunction and the limited discriminative capacity of conventional laboratory-only assessments.

Objective: This study aims to develop and rigorously evaluate a robust machine learning framework for binary liver disease classification, emphasizing predictive stability, diagnostic balance (sensitivity–specificity), and statistical reproducibility across repeated experiments.

Methodology: A structured dataset of 1,700 records with 11 features representing demographic, behavioral, genetic, and clinical determinants was used to train and compare five supervised models: CatBoost, AdaBoost, Random Forest, Support Vector Machine (SVM), and Decision Tree. Performance was assessed …

Direct Solar-Energy Powered Hydrothermal Treatment To Promote Biomethane Production From Anaerobic Digestion Of Rice Processing Waste, Kainat Rahnuma

Student Theses and Dissertations

Hydrolysis is a slow and energy-intensive process and a rate-limiting step in anaerobic digestion (AD). This research investigates performance strategies for integrating hydrothermal treatment (HT) with AD. HT-AD systems were less economically viable than AD-only options because of the high energy consumption of HT. Therefore, we used solar energy to conduct HT via either solar cookers or solar panels. The HT method significantly improved digestion performance, reducing the lag phase from 60 to 24 h, and increasing overall yield. Hydrothermally treated rice, rice bran, and rice hulls produced 22,932 mL, 13,136 mL, and 1283 mL, respectively. However, untreated rice, rice …

A Deep Learning Model For Accurate Tomato Leaf Disease Identification, Maheen Shahzad, Muhammad Abdullah Javed, Erum Ashraf, Hafiz Ishfaq Ahmad, Sabeen Masood

Turkish Journal of Electrical Engineering and Computer Sciences

Recent advances in machine learning and deep learning have greatly improved how we detect plant diseases, making diagnoses more accurate, faster, and easier to scale. However, many existing solutions depend on large, pretrained models that need powerful hardware, which limits their use in the field, especially in areas with limited resources. To tackle this, we designed a custom lightweight convolutional neural network (CNN) built from scratch using 20,000 carefully selected images from the PlantVillage tomato dataset. Our model uses Squeeze-and-Excitation (SE) blocks and Swish activation functions to boost performance, reaching an accuracy of 97.7% while using far fewer computing resources …

Enhancing Wound Healing With Synergistic Dual-Drug Electrospun Roflumilast And L-Arginine Loaded Pla/Pva Nanofibers Through Fabrication, Optimization, And In Vivo Assessment, Samar A. Salim

Nanotechnology Research Centre

Current trends in improved wound management emphasize the development of dual-drug-loaded electrospun nanofibrous scaffolds. Herein, electrospun dual-drug loaded PLA/PVA nanofibrous scaffolds, incorporating roflumilast, a selective phosphodiesterase-4 inhibitor with anti-inflammatory activity, and L-arginine, a precursor to nitric oxide with stimulating activity towards wound healing and tissue regeneration, were developed. A dual-spinneret electrospinning process enabled the coloading of drugs in PLA and PVA phases. Scaffolds were characterized by SEM, FTIR, and XRD, showing consistent fiber morphology, and amorphous drug formation. FTIR analysis was performed to confirm drug–polymer compatibility and successful incorporation of roflumilast and L-arginine within the PLA/ PVA nanofibrous matrix. Swelling …

Assessment Of Heavy Metal Contamination In Surface Water Near Tailings Dam, Gera Techane Mengistu, Tesema Kebede, Enatfenta Melaku, Engdasew Temere

Journal of Sustainable Mining

Elevated levels of heavy metals in surface water can lead to the degradation of water quality, especially in mining areas where tailing dams are sources of heavy metal pollution. This study focuses on evaluating the concentrations of heavy metals in surface water near the Legadembi tailings dams. The mean concentrations (in µg/L) of various heavy metals including: arsenic (As), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), mercury (Hg), molybdenum (Mo), nickel (Ni), lead (Pb), antimony (Sb), selenium (Se), thallium (Tl), uranium (U), vanadium (V), tungsten (W), zinc (Zn), and zirconium (Zr) were determined: 79.7, 0.15, 162.3, 0.66, 18.1, 0.01, …

Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For Conformance Control In Ultra-High Temperature Reservoirs, Yanbo Liu, Tao Song, Caleb Kwasi Darko, Thomas P. Schuman, Mingzhen Wei, Baojun Bai

Chemistry Faculty Research & Creative Works

Preferential fluid flow remains a major challenge in subsurface energy production and gas storage operations, resulting in excessive water production in mature oil fields, reduced heat extraction in geothermal reservoirs, and low sweep and storage efficiency in CO₂-EOR projects. Polymer gels are widely used to mitigate high-permeability channels; however, conventional systems exhibit limited plugging efficiency and short lifetimes in ultra-high-temperature reservoirs due to poor thermal stability. This study presents a novel ultra-high-temperature-resistant preformed particle gel (UHT-PPG) developed for conformance control in reservoirs with temperatures of 150–275 °C and severe super-K or channeling problems. The material was evaluated in …

Design And Fabrication Of A Scaled Automated Dairy Farm Model: A Report, Md Towfiqur Rahman

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Summary

This study investigates how ventilation systems work in dairy barns and builds a scaled model to support education and research. The project is designed to help students from the University of Nebraska–Lincoln (UNL), K-12 learners, and researchers in animal science, veterinary medicine, and engineering gain visual experience with dairy facility components and processes. Different ventilation methods were studied, leading to the design of a 1/64-scale tunnel-ventilated dairy barn meant for 60 Holstein Friesian cows. Barn dimensions were set based on real Holstein cow measurements to ensure proper cow comfort, while airflow requirements were calculated and scaled down. Miniature fans …

Co-Encapsulation Of Microalgae Haematococcus Pluvialis And Lactic Acid Bacteria Lacticaseibacillus Casei Via Filamentous Fungi Scaffolds Improved Probiotic Viability In Simulated Gastro-Intestinal Conditions, Suvro Talukdar, Tyler J. Barzee

Biosystems and Agricultural Engineering Faculty Publications

Fungal-assisted cell immobilization has emerged as a promising approach for food, energy and environmental applications, utilizing the hyphal network of filamentous fungi to encapsulate microorganisms. Co-encapsulation of multiple microorganisms within fungal pellets enables the development of food delivery systems that combine complementary functional and nutritional properties, including enhanced probiotic protection and delivery of bioactive compounds. This study used edible filamentous fungus Aspergillus awamori to encapsulate Haematococcus pluvialis microalgae and Lacticaseibacillus casei lactic acid bacteria (LAB) for probiotic delivery. Both active and heat-deactivated pellets successfully co-encapsulated microalgae and LAB, although low shear conditions were required for inactive fungal states. Under in-vitro …

Exploring Relational Farming Futures For Responsible Innovation In Precision Agriculture Through Q-Method And Speculative Design, Bhavna Joshi, Maaz Gardezi, Edward Prutzer, Awais Hameed Khan, Asim Zia, Benjamin E. K. Ryan, Ali Dadkhah, Donna M. Rizzo, John T. Mcmaine, David Clay

Biosystems and Agricultural Engineering Faculty Publications

This article draws on concepts of speculative design and responsible innovation to examine the possible impacts of data-driven precision agriculture on farmers and farm work. We use an innovative mixed-method approach to research design. Using artistic depiction of futures of precision agriculture in design workshop and in-depth semistructured interviews conducted with the farmers in Vermont and South Dakota, we explain how farmers perceive different futures of precision agriculture. Specifically, in our design workshop, we combined visual arts and social science methods, namely Q-method, to explore existing and new relationships between humans, technologies, and environment in the design, deployment, and use …

Validation Of Final And Dynamic Subsidence Prediction Models Using The Influence Function Method, Carlos M. Hernandez Garcia

Theses and Dissertations--Mining Engineering

This study evaluates the Surface Deformation Prediction System (SDPS Version 7) for predicting final and dynamic subsidence in longwall mining. Using the influence function method, SDPS 7 was calibrated using data from the Quarto 7 Mine (Ohio, USA) and two panels in Anhui Province, China, to test the reliability of the method under varying geological and operational conditions, particularly low advance rates.

For the Quarto 7 Mine, monument line C provided the optimal set of subsidence parameters: SSF of 78%, tanβ of 2.97, edge‑effect offset of 160 ft, with an RMSE of 0.108 ft. These values aligned with estimates obtained …

Mechanical Fractionation Of Wheat Middlings For Application In Pyrolysis And Animal Feed, Okwudili I. Obiakor

Dissertations, Master's Theses and Master's Reports

Wheat middlings are grain byproducts that are underused for bioenergy production despite having a high lignocellulose content. Its use as a feedstock for catalytic pyrolysis depends on effective and sustainable fractionation to enhance efficiency and product yield. This study tested mechanical pre-fractionation (sieving and air classification) to reduce ash content of certain fractions to < 1% for catalytic pyrolysis and enrich nutrient levels of other fractions for feed applications. Wheat middlings were separated into 11 fractions using screen sizes from 106 µm to 1651 µm, and the composition of each fraction was characterized (ash, protein, structural carbohydrates, lignin, starch, and simple sugars). For cyclone separation, a full factorial design was used to study the effect of air velocity (15,18, 20 m/s) and feed rate (33, 35, 38 kg/h) on the amount of material collected in the underflow and overflow, and the composition of these fractions was characterized. Sieving showed a pronounced segregation of ash content, from 4.5% to 6.5% in wheat middlings fractions, with 5.7% being the lowest for coarse fractions which has higher lignocellulose content, and 4.5% in the fine fraction (150-212 µm). The same defined enrichment was observed in all nutrients except for protein. Starch enrichment zone were defined in the fine fractions (212 µm and below), for structural carbohydrates and lignin in the coarse fractions (600 µm and above), and for ash in coarse fractions (1180-1651 µm). In contrast, protein content was not significantly different between various fractions (p value=0.787). The fiber rich fraction (> 600 µm), suitable for pyrolysis, which have a composite ash value of 6.0% can be sorted and mixed with intermediate fractions to reduce ash to 5.3% and the remaining fractions rich in digestible nutrients used for animal feed formulation. Compared to sieving, cyclone separations did not …

Flexible Cu Nanostructured Laser-Induced Graphene Electrodes For Highly Sensitive And Non-Invasive Lactate Detection In Saliva, Anju Joshi, Gymama Slaughter

Center for Bioelectronics Publications

A scalable and facile fabrication strategy is presented for developing a flexible, nanostructured, non-enzymatic electrochemical sensor for lactate detection based on copper-modified laser-induced graphene (CuNPs/LIG). A one-step electrodeposition process was employed to uniformly decorate the porous LIG framework with copper nanostructures, offering a cost-effective and reproducible approach for constructing enzyme-free sensing platforms. Scanning electron microscopy and energy-dispersive X-ray spectroscopy confirmed dense Cu nanostructure loading and efficient interfacial integration across the conductive LIG surface. The resulting CuNPs/LIG electrode exhibited excellent electrocatalytic performance, achieving a sensitivity of 8.56 μA µM⁻¹ cm⁻² with a low detection limit of 42.65 …

Remote Sensing-Based Rice Detection: Novel Indices From Optical And Sar Synergy, Kaifi Chomani

Mansoura Engineering Journal

Accurate rice mapping is challenging due to the lack of a simple, efficient approach and the complexity and limited ability of existing methods to distinguish rice fields from non-rice fields. This study proposes two novel indices: the Multispectral Rice Detection Index (MRDI), which utilises optical imagery, and the OptiRadar Rice Index (ORRI), which incorporates both optical and Synthetic Aperture Radar (SAR) data. Ground-truth data from the Cropland Cropping Systems (CROS) were used to assess the performance of both indices. The findings indicated that MRDI achieved an overall accuracy of 97.97% with perfect recall (100%) but lower precision (78.65%). However, the …

Optimizing The Lightweight Steel Fibre Reinforced Bacterial Concrete With Nano-Silica And Coconut Shell Aggregates Using Taguchi Method, Damodaran Pooja, Mayilsamy Yuvaperiyasamy

Mansoura Engineering Journal

Concrete is essential for construction due to its high strength and durability. It supports most modern infrastructure globally. Cement production is a major source of CO₂ emissions, posing serious environmental concerns. Additionally, the rising demand for concrete is straining the limited supply of essential raw materials, such as aggregates. Researchers are examining alternative materials to improve Sustainability while maintaining structural strength to address these issues. This research aims to improve concrete performance by enhancing cement durability with nano-silica. Coconut shell, an agricultural by-product, functions as an eco-friendly alternative to conventional coarse aggregates, alleviating their scarcity. Microbiologically induced calcium carbonate precipitation …

A Transdisciplinary Approach To Advancing Water Security And Public Health: The “Nurse + Engineer” Model For Achieving Sustainability In Wash Systems Using Community-Based Participatory Research, Daniel B. Oerther, Sarah Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Human health is linked to the health of the environment, a concept referred to as planetary health. As environmental challenges become increasingly complex, single-disciplinary approaches are insufficient to achieve sustainable solutions. This article presents a transdisciplinary framework, termed the "Nurse + Engineer" model, as a novel methodology for addressing complex problems at the nexus of environmental engineering and public health. The model integrates the technical design and systems-level thinking of environmental engineering with the community-based, patient-centered care of nursing. This work details the key lessons learned from the retrospective application of this framework to a series of multi-year, community-based participatory …

Typology And Spatiotemporal Patterns Of Illegal Fishing Activities In The Philippines: Implications For Fisheries Management, Marlowe O. Acevedo, Tzu-Yun Ching, Chih-Shin Chen

Journal of Marine Science and Technology–Taiwan

Illegal, unreported, and unregulated (IUU) fishing activity is a global threat and continues to undermine the effectiveness of fisheries regulations and management measures. However, the extent of illegal fishing in Philippine waters remains unclear. This study aims to identify the types of illegal fishing in Philippine waters and analyzed their temporal and spatial patterns. Data were obtained from the records of the Philippine Coast Guards (PCG) and Maritime Law Enforcement Agencies from 2015 to 2020. A total of 602 apprehensions were recorded, resulting in 813 violations, of which 630 cases were fishery violations. Most of the watercrafts involved in the …

Proceedings Of The Eleventh Annual Indiana Stem Education Conference: Stem Journeys, William S. Walker Iii, S. Selcen Guzey

Indiana STEM Education Conference

The Proceedings of the Eleventh Annual Indiana STEM Education Conference are edited by the Center for Advancing the Teaching and Learning of STEM (CATALYST, https://www.education.purdue.edu/catalyst/) at Purdue University. The theme for the 2026 conference is STEM Journeys, celebrating the multiple pathways and experiences that advance student learning in STEM education.

A Novel Superaug Adaptive Data Augmentation Strategy For Metabolic Syndrome Prediction: The First Egyptian National Cohort Study With Multi-National Comparison, Nihal Elsonny, Ashraf Elsharkawy, Abeer Tawakol, Amira Y. Haikal

Mansoura Engineering Journal

Metabolic Syndrome (MetS) is a multifactorial disorder associated with an increased risk of cardiovascular disease, type 2 diabetes, and obesity-related complications. Early and accurate prediction of MetS remains challenging due to heterogeneous data sources, class imbalance, limited sample sizes in regional studies, and poor generalization across populations.

This study introduces a comprehensive machine learning framework for predicting MetS and its prognostic factors using two heterogeneous datasets: a newly collected Egyptian clinical cohort and the U.S.-based (NHANES) [CDC, 2023] dataset. For each dataset, multiple experimental pipelines are developed, integrating preprocessing, feature selection, data augmentation, hyperparameter tuning, and ensemble modeling. …

Development Of Poly(Lactic Acid)/Ethylene-Propylene-Diene Monomer/Cellulose Composites Using Cellulose Extracted From Hemp Biomass For Plastic Packaging Applications, Supanicha Alapon, Natthanich Thongmee, Wikoramet Teeka, Pattara Somnuake, Sirirat Wacharawichanant

Journal of Metals, Materials and Minerals

Poly(lactic acid)/ethylene-propylene-diene monomer (EPDM)/cellulose composites using cellulose derived from hemp biomass (CHB) were investigated in this research. Morphology, chemical structures, functional groups, and crystallinity of CHB were characterized, observing a size of 135 ± 32 μm from SEM images with high purity and crystallinity from FT-IR and XRD spectroscopy. The optimized CHB was incorporated at 1 phr, 3 phr, and 5 phr into PLA/EPDM blends at 90/10 w/w. The polymer composites were prepared using an internal mixer, and samples were produced by compression molding for mechanical and thermal testing. The results indicated that the EPDM phase dispersed as droplets in …

Green Synthesis And Optimized Annealing Temperature Effects On Zinc Oxide Nanoparticles Using Mango Peel Extract, Supamas Wirunchit, Natchayaporn Sakulpeeb, Woradech Meedech, Sutee Chutipaijit, Wantana Koetniyom

Journal of Metals, Materials and Minerals

This study presents the green synthesis of zinc oxide nanoparticles (ZnO-NPs) using mango peel extract (MgE) as a natural reducing and stabilizing agent. Phytochemical extraction was performed with deionized water, ethanol, and methanol for 1 h to 5 h, with deionized water at 4 h yielding the highest flavonoid content. Using zinc nitrate as a precursor, 25 mL of MgE successfully facilitated the synthesis of ZnO-NPs (ZnO-25MgE). It was found that annealing temperature at 400℃ for 6 h produced pure ZnO. The obtained nanoparticles were characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and field emission scanning electron microscopy …

Too Warm To Win Big? Unpacking The Backer Dynamics Behind Female Crowdfunding Success Using A Warmth And Competence Perspective, Dan Liu

Journal of International Technology and Information Management

While crowdfunding is often heralded as a democratized funding avenue that empowers women with higher success rates, this study reveals a more nuanced picture of gender dynamics. The Stereotype Content Model suggests that women are often perceived as warmer but less competent. Using a large dataset from Kickstarter, we find that female-led projects can attract more backers, likely due to warmth-driven appeal, but receive smaller average contributions, potentially due to concerns about risk linked to lower perceived competence. However, the total funding raised by female-led campaigns is comparable to that of male-led ones, showing no clear advantage or disadvantage. This …