Digital Commons Network^™

Aeroelastic Simulation Of Shape Adaptive Wing, Allan Alfred Kozich Iii

Honors Undergraduate Theses

Morphing wings provide aerodynamic qualities that normal fixed wings cannot, such as the ability to improve endurance yet maintain maneuverability, overcome strong gusts, vibrations, and shocks, and handle both ideal flight for both high and low speeds. A critical application of the new generation of morphing wings is the ability to overcome and affect the onset flutter, a self-excited oscillatory instability that has led to the destruction of aircrafts. This work investigates aeroelastic behavior and measurement of a meta-material structured "smart" wing and its attempt to delay the effect of flutter. The variable wing tip model is analyzed through finite …

Qubit Lattice Algorithm Simulations Of The Scattering Of A Bounded Two Dimensional Electromagnetic Pulse From The Infinite Planar Dielectric Interface, Min Soe, George Vahala, Linda Vahala, Efstratios Koukoutsis, Abhay K. Ram, Kyriakos Hizanidis

Electrical & Computer Engineering Faculty Publications

Qubit lattice algorithm (QLA) simulations are performed for a two-dimensional spatially bounded pulse propagating onto a plane interface between two dielectric slabs. QLA is an initial value scheme that consists of a sequence of unitary collision and streaming operators, with appropriate potential operators, that recover Maxwell equations in inhomogeneous dielectric media to the second order in the lattice discreteness. For the case of total internal reflection, there is transient energy transfer into the second medium due to the evanescent fields as the Poynting unit vector of the pulse is rotated from its incident to reflected direction. Because of the finite …

Flexible Cu Nanostructured Laser-Induced Graphene Electrodes For Highly Sensitive And Non-Invasive Lactate Detection In Saliva, Anju Joshi, Gymama Slaughter

Center for Bioelectronics Publications

A scalable and facile fabrication strategy is presented for developing a flexible, nanostructured, non-enzymatic electrochemical sensor for lactate detection based on copper-modified laser-induced graphene (CuNPs/LIG). A one-step electrodeposition process was employed to uniformly decorate the porous LIG framework with copper nanostructures, offering a cost-effective and reproducible approach for constructing enzyme-free sensing platforms. Scanning electron microscopy and energy-dispersive X-ray spectroscopy confirmed dense Cu nanostructure loading and efficient interfacial integration across the conductive LIG surface. The resulting CuNPs/LIG electrode exhibited excellent electrocatalytic performance, achieving a sensitivity of 8.56 μA µM⁻¹ cm⁻² with a low detection limit of 42.65 …

Electrochemical Hemoglobin Biosensors For Point-Of-Care Diagnostics, Ashwini Dantanarayana, Gymama Slaughter

Center for Bioelectronics Publications

Hemoglobin (Hb) and its glycated variant (HbA1c) are essential clinical biomarkers for diagnosing anemia, acute hemorrhage, and long-term glycemic control. The growing demand for decentralized point-of-care (POC) testing has accelerated the development of rapid, inexpensive, and portable electrochemical sensing platforms. These technologies exploit the intrinsic redox activity of the heme prosthetic group, yet achieving efficient direct electron transfer (DET) remains a fundamental challenge because the electroactive iron center is deeply embedded within the globin structure. This review critically examines recent advances in electrochemical Hb sensing, tracing the evolution of electrode architectures from conventional carbon substrates to nanostructured materials, including graphene, …

Impact Of Bubble-Induced Turbulence On Two-Phase Flow Dynamics At High Void Fraction In A Large Diameter Channel, Sungje Hong, Joshua P. Schlegel, Subash L. Sharma

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

This study represents the first investigation into the influence of bubble-induced turbulence (BIT) on interfacial area transport mechanisms in gas–liquid two-phase flows under conditions of high void fraction and high velocity in a large diameter channel. Given the unique characteristics of bubble flow in larger channels, the turbulent effects induced by bubbles differ from those observed in smaller channels. However, limited research exists regarding the impact of BIT beyond bubbly flows in large-diameter channels. To address this gap, two approaches for implementing the BIT model are explored: a direct method and an indirect method. This paper assesses both the general …

Electronic Bills Of Lading And Blockchain Technology: A Regulatory Perspective, Hsin-Hua Tsai

Journal of Marine Science and Technology–Taiwan

Information and communications technology (ICT) systems are increasingly relevant to the maritime sector. Regarding the revolution of the bill of lading, many shipping lines and other technology startups have been looking into developing viable electronic transport documents that have the same functions as paper bills of lading to reduce supply chain risks. The limitations of the paper-based process have become increasingly visible in the COVID-19 crisis. The main purpose of the article is to analyze the application of blockchain bills of lading, which utilizes computational logic to create the digital ledger, and users can set up algorithms and rules to …

Visually Guided Landing System On Ship Deck For Multicopter, Dong-Lin Li, Shih-Kai Lee, Tzu-Hsiang Chou

Journal of Marine Science and Technology–Taiwan

Traditionally, high-value fish have been located at sea using helicopters. However, with advancements in technology, maritime drones have become increasingly important in recent years. Compared to traditional helicopter-based methods, drones offer significantly lower operational costs, making them cost-effective. However, the challenging sea conditions, including strong winds and the swaying motion of vessels, pose significant challenges for drone landings.

This paper proposes a stable approach for multicopter landing on ships at sea, incorporating improved marker detection, enhanced wind resistance control, and more accurate deck motion prediction. In the marker detection phase, we introduce a method to improve the accuracy of ArUco …

Hall Current And Nth Order Chemical Reaction Effects On Unsteady 3d Mhd Williamson Nanofluid Flow With Thermophoresis And Brownian Motion Over An Inclined Stretching Sheet, Polavarapu Sudheer, Ramachandra Reddy Vaddemani, Raghunath Kodi

Mansoura Engineering Journal

This study examines the influence of Hall current and nth-order chemical reaction on unsteady three-dimensional magnetohydrodynamic (MHD) Williamson nanofluid flow over an inclined stretching sheet. The model incorporates thermal radiation, heat source, Brownian motion, and thermophoresis effects. The governing nonlinear partial differential equations are transformed into a system of ordinary differential equations using similarity transformations and solved numerically using the shooting method with a fourth-order Runge–Kutta scheme. The results indicate that an increase in the magnetic parameter significantly reduces velocity profiles while enhancing temperature and concentration distributions. The Hall parameter reduces surface drag and improves heat transfer, while decreasing mass …

Exploring The Interplay Of Operational Conditions, Microbial Communities, And Water Quality In Drinking Water Ozone-Biofiltration, Kara Yvonne Cunningham

Graduate Theses, Dissertations, and Problem Reports (ETD)

Ensuring reliable access to safe drinking water is a growing global challenge as water utilities face variable source water quality driven by population growth, land‑use change, and climate change impacts. To address these challenges, utilities are implementing advanced treatment technologies designed to improve reliability under variable source water conditions. Ozone-biofiltration has emerged as a treatment approach that can reduce a wide range of natural and anthropogenic contaminants. However, despite its increased use, there is limited insight into the biological processes shaping filter function or how they respond to operational and environmental changes. Advances in molecular microbiology and high-throughput sequencing now …

A Web-Based Wizard-Of-Oz Platform For Collaborative And Reproducible Human-Robot Interaction Research, Sean O'Connor

Honors Theses

The Wizard-of-Oz (WoZ) technique is widely used in Human-Robot Interaction (HRI) research, but two persistent problems limit its effectiveness: existing tools impose technical barriers that exclude non-engineering domain experts (the Accessibility Problem), and the fragmented landscape of robot-specific implementations makes interaction scripts difficult to port across platforms (the Reproducibility Problem- concerning execution consistency and portability, not third-party replication). Through a literature review, I identified three design principles to address both: a hierarchical specification model, an event-driven execution model, and a plugin architecture that decouples experiment logic from robot-specific implementations. I realized these principles in HRIStudio, an open-source, web-based platform providing …

Sainik Vol 1 Issue 2, Sastra Deemed To Be University

SAINIK

No abstract provided.

Powering The Machine, Draining The Planet: Whether U.S. Environmental Law Is Equipped To Regulate The Energy And Water Demands Of Ai Data Centers, Michael Marcu

Journal of Earth and Life Science

Artificial intelligence (AI) data centers have become one of the United States' fastest-growing and least-regulated sources of environmental stress. In 2024 alone, U.S. data centers consumed 183 terawatt-hours (TWh) of electricity more than the entire nation of Pakistan and consumed an estimated 17 billion gallons of water (IEA, 2025; Berkeley Lab, 2024). By 2030, electricity demand from these facilities is projected to reach 426 TWh, a 133% increase in six years (Pew Research Center, 2025). This paper examines whether the existing U.S. environmental regulatory framework put by the National Environmental Policy Act (NEPA), the Clean Water Act (CWA), and the …

One Product, One Hook, Thousands Of Views, Mackenzie Lauto

Student Research Design & Innovation Symposium

The video highlights how a single, well-positioned product, Cocokind lip balm, with a great discounted deal of running, can generate strong engagement through strategic short-form content. By combining a clear value proposition (a high-quality product at a discounted price) with a scroll-stopping hook, the video demonstrates how brands can quickly capture audience attention. This approach has urgency, relatability, and visual appeal to drive views, interaction, and potential conversions, showcasing the effectiveness of simplicity in social media marketing.

6 Degrees Of Freedom Robotic Arm, Vansh Garg , ‘26, Eric Chen , ‘26, Kaw Moo , ‘26

Senior Theses, Projects, and Awards

This project involved the design, fabrication, and testing of a 6 degree of freedom robotic arm. The goal was to demonstrate that a low-cost, 3D-printed system could achieve useful strength, modularity, and basic manipulation for simple pick-and-place tasks. Potential applications include education, prototyping, hobbyist robotics, and low-precision automation.

The mechanical system uses 3D-printed arm links, cycloidal gearboxes, belt-driven transmission, bearings, and a modular end effector. These components were selected to balance cost, manufacturability, and performance, with gear reduction used to increase available joint torque. The electrical system provides motor actuation, power distribution, and controller integration, while the software enables command-based …

Application Of Passive Samplers For Exploring Remedial Progress In The Torch Lake Aoc And Interlake Variability Of Pcbs, Cailin B. Bishop

Dissertations, Master's Theses and Master's Reports

This study evaluates changes in dissolved polychlorinated biphenyl (PCB) concentrations in Torch Lake, Michigan, an Area of Concern shaped by decades of legacy contamination and evolving restoration policy. Passive samplers deployed across sites and seasons (2024–2025) show total PCB concentrations ranging from below detection to 110 pg/L (mean = 16.8 pg/L), representing an approximate 90% decline since 2005. Comparisons with regional reference lakes indicate no statistically significant difference (p = 0.84), suggesting concentrations may approach background atmospheric levels despite continued variability. Congener profiles indicate a shift toward lower-chlorinated PCBs, though interpretation of higher-chlorinated congeners is limited by slow sorption kinetics. …

Eeg And Imu Gait Signal Processing: A Comparative Assessment Of The "Reza" Exponential Filter And Classic Filters, Reza Pousti, Daniel M. Russell, Derek C. Monroe, Christopher K. Rhea

Rehabilitation Sciences Faculty Publications

Noise degrades both EEG and gait signals, and classical IIR filters (Butterworth, Chebyshev, elliptic) involve trade-offs between passband flatness, ripple, and roll-off. This study compared a novel exponential "Reza" filter with these designs for neural and locomotor data. We analyzed an open-source mobile brain-body imaging dataset with EEG and gait data from 49 healthy adults (EEG: 256-channel, 512 Hz; IMUs: six APDM Opals, 128 Hz). EEG channels were grand-averaged and band-pass filtered at 0.5-50 Hz, while IMU axes were averaged and band-pass filtered at 0.5-5 Hz. The outcomes were signal-to-noise ratio SNR (dB) and band-integrated Welch PSD (EEG:0.5-50 Hz; IMU:0.5-5 …

Feasibility Of Upcycling Spent Lithium-Ion Battery To Carbon Dioxide Capture Adsorbent, Chimezie Frank Onwudinjo

Master’s Theses

This study investigates the feasibility of repurposing spent lithium-ion battery (SLIB) to lithium orthosilicate (Li₄SiO₄), a high temperature carbon dioxide sorbent. Two synthesis pathways including conventional acid-leaching method (Scenario 1) and a pyrolysis-based route (Scenario 2) were explored. Additionally, techno-economic analysis (TEA) and lifecycle assessment (LCA) of the two processes were also performed. Different analytical characterization techniques were performed to understand the material properties of Li₄SiO₄ including surface area, crystallinity, morphology and thermal stability. CO₂ capture performance of the synthesized Li₄SiO₄ was tested in a thermogravimetric analyzer (TGA) using …

Innovative Smart Sensing System For Accurate Monitoring Of Uhpc Setting Time, Ted Atera, Khalilullah Taj, Masoud Pasbani, Yen-Fang Su

Distinguished Undergraduate Researcher Program

Ultra-High-Performance Concrete (UHPC) is an advanced concrete material known for its strength and durability. Its superior mechanical properties make it an ideal material for demanding structural applications such as bridges. Accurate setting time measurements are crucial in helping to optimise the performance of UHPC. All conventional methods and standards for measuring the setting time of concrete rely on using expensive specialised equipment, such as the Vicat apparatus, which assesses penetration depth or resistance. However, these methods may not be well-suited for UHPC due to its rapid surface drying while the interior remains fresh. This prevents free needle penetration and leads …

Novel Methods For Environmental Fluoride Measurement, Cable Warren

Chemistry & Biochemistry Dissertations

Fluoride analysis has been an important focus of analytical analysis for many years and will continue to be so going forward. Today, fluorinated compounds, specifically per/polyfluoroalkyl substances (PFAS), better known as “forever chemicals” have captured the moment and are the subject of vast research and regulation. Under this context, I have researched new methods of fluoride separation and concentration in complex media as well as a novel method of PFAS destruction and total organic fluorine analysis for screening of PFAS in aqueous samples. Through research and work on micro-scale detection methods, an understanding of the state of the art and …

Using Network Models To Understand Biological Signaling Architecture, Russ White, Emily Brown Reeves, Gerald L. Fudge

Faculty Publications

Engineers have developed abstract network models to better understand the recurring problems faced by communication systems. This paper argues that these models can be generalized to describe biological communications systems given that they share many requirements with human-designed systems, including functional requirements and physical constraints. Leveraging collaboration, biologists and engineers can work together to use well-understood communication systems, designed to carry data across a computer network, as a model for analyzing less well-understood biological communication systems in order to make predictions and uncover previously unknown functionalities. To illustrate this approach, we apply the Recursive Internet Network Architecture model (RINA) to …

Undergraduate Student Support Survey And Scoring Guide, Kerrie A. Douglas, Adrian Gentry, Julie P. Martin, Tiantian Li

School of Engineering Education Working Papers

No abstract provided.

Network Merge, Alexander York

Williams Honors College, Honors Research Projects

This project will be simulating the merge of two company's networks. Company A will contain two sties connected with a VPN, and will extend this VPN to one site for Company B. This project will focus on researching how merging a network works, how routes are commonly redistributed across different routing protocols, and how each site can run their own but link servers(DHCP, DNS, etc.). Both sites will be secured from both outside and inside attacks through passwords and other network security features such as VLANs & BPDU Guard.

Breaking The Vapor Barrier And Scale: Revolutionizing Steel Quenching With Ultrasound Technology, Anthony O. Santos

Williams Honors College, Honors Research Projects

The quenching process is a fundamental heat treatment used to enhance material properties by heating steel to its austenitizing temperature and rapidly cooling it to form high-strength martensite. However, this process is often hindered by two surface barriers: the Leidenfrost effect (vapor blanket) and oxide scale. These cooling limitations restrict the use of steel in high-performance aerospace applications due to inconsistent material properties and unpredictable engineering properties. This research investigates the use of fully submersible, 50-watt 40 kHz ultrasound technology to improve cooling rates in a Jominy test [4]. Through numerical simulations and experimental validation, the study demonstrates that acoustic …

Thermal Radiation Effects On Particles From Plasma Arc Radiation, Reece Davis, Joseph Mcgee

Williams Honors College, Honors Research Projects

Understanding the radiation heating and transport of both microparticles and nanoparticles is a phenomenon that is critical for both space and Earth sciences. In space, these particles are heated by plasma arcs within ionized space clouds or solar flares and can be present the path of deep space missions and orbital satellites. While on Earth, processes such as forest fires, nuclear fusion, and microchip manufacturing include the plasma arc heating of particles. These particles lay within the Mie Scattering Regime and Rayleigh Scattering Regime and emit radiation differently based on their diameter. New mathematical and computational modeling has been conducted …

Computer-Aided Molecular Design To Identify More Environmentally Friendly Pfas, Melvin M. Keita

Williams Honors College, Honors Research Projects

The goal of this project is to inversely design alternatives to per- and polyfluoroalkyl substances (PFAS) using Computer-Aided Molecular Design (CAMD). PFAS, also described as “forever chemicals”, have been used in industry and consumer products since the 1940s. PFAS can be found in drinking water, food, food packaging, waste sites, and other sources. Exposure to different PFAS can lead to increased risks of some cancers, immune effects, and reproductive effects. Pulling from existing data, this project will use quantitative structure-property relationships (QSPRs) to design PFAS alternatives that possess optimal properties to prevent adsorption into drinking water and other potential sources …

Predictive Structural Modeling In Ansys And Destructive Testing For Composite Structures, Dylan Matthews, Grant Abraham, Andrew Raineri

Williams Honors College, Honors Research Projects

Composite structures are central to the performance and reliability of Zips Racing’s Formula SAE vehicles, yet the team currently relies on historical data and partially unvalidated assumptions when selecting carbon fiber layups. This project aims to establish a quantitative, experimentally validated framework for designing composite components through the integration of simulation modeling, physical fabrication, and destructive mechanical testing. Analytical laminate theory models developed in MATLAB and laminate simulations created in Ansys ACP will be used to predict stiffness, strength, and failure characteristics for a range of candidate layups. These predictions will be validated through controlled testing of fabricated composite coupons …

A Dual-Domain Face Forgery And Deepfake Detection Framework, Neha Pradyumna Bora, Pradyumna Mulchand Bora, Rushikesh Sanjay Kumavat, Raunak Manoj Gangwal, Prit Sandesh Jain, Hardik Vijay Ostwal

Mansoura Engineering Journal

Concerns about media authenticity, privacy, and information security arising from rapid advances in deepfake technology have made it increasingly important to detect manipulated facial content reliably. The primary goal of our work was to develop a deepfake detection model with high generalization across multiple datasets. To achieve this, we developed a hybrid detection approach that combines spatial visual texture analysis and frequency-domain analysis to detect manipulated facial images. Our approach includes convolutional spatial feature extraction from facial images and frequency—domain representations of the same images obtained by applying the fast Fourier transform. To help alleviate concerns about overreliance on frequency—domain …

Effect Of Two Cut Off Rows On Seepage Underneath Hy-Draulic Structures Using Weak Form Differential Quadra-Ture Element Method: A Theoretical Approach, Esraa Ahmed, El-Masry A. A, Hossam A.A. Abdel Gawad, Ahmed Elhamrawy

Mansoura Engineering Journal

Investigating confined seepage underneath hydraulic structures is crucial to ensure the safety of these structures. The Weak Form Quadrature Element Method (WFQEM) is the basis of this paper, which explores the behavior of confined flow. The seepage flow governing equation is solved numerically to estimate the uplift pressure underneath the hydraulic structures and the exit gradient.The Gauss–Lobatto–Legendre (GLL) type is used as nodal and integration points. Several models were solved to validate the applied numerical method. The obtained results are compared with theoretical and preceding numerical solutions mentioned in the literature. The system of equations generated from applying the WFQEM …

Preserving The Identity Of Historic Coptic Orthodox Monasteries In Egypt Under Contemporary Pressures: Case Studies Of St. Bishoy And St. Anthony Monasteries, George Medhat Adeeb, Mohamed Khairy Amin, Mohamed Ahmed Al-Sherbiny

Mansoura Engineering Journal

Historic Coptic Orthodox monasteries in Egypt (HCOMEs) represent an important component of Christian heritage, integrating architectural value with enduring spiritual traditions that reflect both tangible and intangible dimensions. However, contemporary development and changing functional demands are generating transformations that may affect their identity if not carefully managed. Despite extensive scholarship, limited research has systematically examined these transformations through a structured evaluative approach. This study addresses this gap by developing and applying an analytical and evaluation framework to examine how contemporary pressures influence the historical, architectural-spatial, and spiritual identity of HCOMEs, and to assess the effectiveness of monastic responses. The framework …

Control Of Steel Corrosion Using Natural Corrosion Inhibitor, Rasha A. Nasef, O. Hamed, M. M. El-Halwany, M. H. Mahmoud

Mansoura Engineering Journal

This study investigates corrosion control of AISI 430 stainless steel in 1M HCl medium using an eco-friendly inhibitor extracted from pomegranate peel (PPE). The inhibition efficiency was evaluated at different PPE concentrations, with the highest applied concentration of 13g/L. Corrosion behavior was evaluated through weight-loss measurements and potentiodynamic polarization techniques conducted at room temperature.

The experimental results showed that corrosion resistance improved as the inhibitor  concentration increased. Lower corrosion rates were observed in the presence of PPE, along with reduced anodic and cathodic activities, indicating that the extract functions as a mixed-type inhibitor. Surface analysis confirmed the formation of …