Digital Commons Network^™

Cross-Facility Reliable Deep Learning Based Beef Marbling Assessment Via Unsupervised Domain Adaptation Regression, Samuel Vinson

Biological and Agricultural Engineering Undergraduate Honors Theses

Inconsistent quality grading in beef production leads to inefficiencies, economic disparity, and consumer mistrust. While USDA meat grading traditionally relies on skilled visual inspectors, these human evaluations suffer from cross-facility variability and subjectivity. This paper introduces the first known application of unsupervised domain adaptation regression for cross-facility beef marbling score prediction—an innovation that improves generalization across diverse environments in the beef supply chain. Utilizing numerical scores ranging from 100-900, the research employed convolutional neural networks (CNNs), including ResNet, VGG, and AlexNet architectures. The study specifically introduced and validated a unified unsupervised domain adaptation regression method using the ResNet-50 architecture to …

Bridging Reaction Engineering And Polymers Design: Solvent Effects In Continuous Flow Copolymerization, Leila Ba

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Poly(glycidyl methacrylate-co-methyl methacrylate) [poly(GMA-co-MMA)] is a promising functional copolymer for photoresist applications due to its reactive epoxy groups and tunable physicochemical properties. This thesis is focused on this polymer and integrates theoretical solubility prediction, thermodynamic modeling, and continuous-flow synthesis to establish quantitative structure–process–property relationships for their use in microelectronic-grade solvents.

Solubility behavior in dimethyl sulfoxide (DMSO), propylene glycol monomethyl ether (PGME), and propylene glycol monomethyl ether acetate (PGMEA) was investigated using the Hildebrand and Hansen models, Hoy group-contribution method, Polymer Genome machine-learning platform, and Flory–Huggins thermodynamic analysis of Gibbs free energy of mixing. Experimental saturation solubility measurements at 25 °C …

Experimental Data-Driven System Identification Of Scale-Model Airboat Dynamics For Control And Autonomy Applications, Miguel A. Trejos

LSU New Orleans Theses and Dissertations

To achieve autonomous control of a surface watercraft requires an accurate model describing the dynamics of the system. To this end, the modeling of dynamics of an airboat with a combustion engine-based propulsion system is investigated. Specifically, a black-box data-based approach using neural networks. To facilitate this, a custom data collection system was developed to record linear and rotational motion during field tests. Due to the airboats unique ability to traverse different terrains, not just water, the modeling of dynamics on different terrains was investigated.

Optimization-Based Power Management For Hybrid Towing Vessels: A Comparative Framework Toward Mission-Aware Control, Rachel K. Burchill

LSU New Orleans Theses and Dissertations

This thesis presents an optimization-based framework for power management in hybrid towing vessels operating under dynamic mission conditions. A physically consistent modeling approach is developed, incorporating battery state-of-charge dynamics (SOC), unified power flow, and operational constraints. The framework evaluates rule-based control using fixed heuristic thresholds, Particle Swarm Optimization (PSO), Genetic Algorithm (GA), and multi-objective Non-Dominated Sorting Genetic Algorithm II (NSGA-II) under a representative harbor-assist mission profile. Results show that optimization-based methods significantly outperform rule-based control. PSO achieves the lowest fuel consumption and near-perfect tracking with minimal battery use, while GA provides balanced performance with moderate battery utilization. NSGA-II reveals a …

A New Electroencephalography Electrode Design For Curly And Kinky Hair Types, Elena Butler

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Medical discrimination and implicit bias are present in both societal systems and into the design and validation of medical devices. Traditional electroencephalography (EEG) systems often fail to provide reliable physiological recordings on curly and kinky hair types (3B–4C), associated typically with Black American and others of African descent. EEG on these hair types often results in high electrode-scalp impedance, poor signal quality, and participant discomfort. Consequently, such technical biases contribute to the underrepresentation of these populations in neuroscience research and clinical diagnostics, while simultaneously limiting equitable access to EEG-based medical care.

To address this gap, a novel conductive electrode attachment …

Design, Simulation, And Experimentation Of A Box Barge Model Under Asymmetrical Conditions, Kylie Sink

Senior Honors Theses

This study investigates the ability of numerical simulations to predict vessel motion responses under asymmetrical loading conditions. A raked barge model was designed, constructed, and tested in a towing tank to evaluate the response amplitude operators (RAOs) for heave, roll, and pitch under various wave conditions. The model included six internal compartments that allowed different flooding scenarios to be simulated in order to create asymmetric loading conditions. Experimental testing was conducted under head seas (0 degrees) and beam seas (90 degrees) with multiple wave periods.

A numerical model of the vessel was developed using GHS to generate predicted RAOs for …

Computational Fluid Dynamics Modeling Of Counter-Current Flow In Channels Separated By A Membrane, Akram Mashhour Riziq Abdullah

Graduate Theses and Dissertations

Counter current flow in channels separated by membrane were studied in several published studies. The present study aims to numerically and analytically simulate and physically describe the distribution of pressure, volume flow rate and velocity in counter current flow module. Numerical simulation Computational fluid dynamics (CFD) was performed by solving Navier-Stokes (N–S) equations in the channels and membrane pores (vertical channels) to determine pressure and velocity fields. An analytical solution one-dimensional (1-D) model was developed to simulate the flow in the channels and membrane pores by solving the continuity and Darcy’s Law to obtain pressure and volume flow rate. Accordingly, …

Engineering Silicone Magnetic Fluids For Localized Radiation Attenuation During Ocular Melanoma Brachytherapy, Zachary L. Caprow

All Dissertations

Ocular melanoma is commonly treated using plaque brachytherapy; however, radiation-induced damage to healthy ocular tissues frequently results in partial or complete vision loss. This work investigates the development of an injectable, magnetically responsive silicone magnetic fluid designed to localize adjacent to the tumor and attenuate low-energy gamma radiation during treatment.

The material system consists of iron oxide nanoparticles surface-functionalized with a siloxane polymer, in which the nanoparticles provide magnetic responsiveness and radiation attenuation, while the polymer coating ensures colloidal stability, injectability, and biocompatibility. A one-pot synthetic approach was developed wherein a functionalized siloxane polymer containing iron-affinitive groups was reacted with …

Board-Level Operating System Infrastructure In Rust, Lydia Klaus

McKelvey School of Engineering Graduate Student Theses & Dissertations

Memory and multi-threading problems are the cause of many exploits and security vulnerabilities, and errors of this nature are easy to cause in programming languages such as C and C++. Despite this, these languages are still heavily used for systems programming and underpin the majority of operating system kernels. This is partially due to a lack of suitable replacements; however, Rust is becoming more prominent as an option for systems programming. This language features a much more stringent approach to memory and multi-threading safety. It also aims to support a wide range of hardware targets, including microcontrollers, which have long …

Establishing Caenorhabditis Elegans As A Platform For Bioaccumulation And Selectivity Screening Of Anthelmintic Compounds, Jiarui Li

McKelvey School of Engineering Graduate Student Theses & Dissertations

To address the cuticular barrier in anthelmintic discovery, this study establishes a bifurcated framework in Caenorhabditis elegans. First, HPLC-based quantification of 14 PIM inhibitors revealed that cuticular penetrance is primarily dictated by phylogenetic lineage (Clade V) rather than ecological niche. Specifically, C. elegans demonstrated a significant pharmacokinetic correlation with the hookworm Ancylostoma ceylanicum (Clade V) but not the whipworm Trichuris muris (Clade I), validating it as a superior surrogate model for hookworm bioaccumulation. Within this small molecule inhibitor library, SGI-12was identified as a lead candidate with superior potency against C. elegans and bioaccumulation. Second, target validation using a C. …

Low-Cost Rf Exposure Monitoring With Tinyml Prediction, Sanad Sahawneh

Nanoscale Science & Engineering (discontinued with class year 2014)

The proliferation of wireless technologies has produced a dense, increasingly heterogeneous radio-frequency (RF) environment that surrounds modern life. While regulatory bodies such as the Federal Communications Commission (FCC) and the World Health Organization (WHO) maintain exposure guidelines, the tools that ordinary people, educators, and small institutions can use to actually observe RF exposure in their own spaces remain expensive, specialized, and largely confined to professional laboratories. Spectrum analyzers and calibrated field probes routinely cost between five hundred and one hundred thousand dollars per unit, placing continuous local monitoring out of reach for most environments where exposure questions are most natural …

Hdra-Fusion: Hybrid Detection With Routed Architecture For Manipulation-Aware Ai Face Forgery Detection, Omar Ebeid

Theses and Dissertations

With the rapid advancements in artificial intelligence-based image generation and manipulation tools, it is extremely difficult to detect if an image is genuine or artificially crafted. Despite extensive research in this area, existing image detection systems suffer from three major problems: suboptimal cross-dataset generalization due to shortcut learning of dataset-specific patterns, unreliable probability estimates due to domain shift, particularly in cross-manipulation evaluation settings, and an inability to detect images manipulated by multiple types of manipulations within a single detection framework. To address these limitations, we propose HDRA-Fusion (Hybrid Detection with Routed Architecture), a framework built on the conclusion that different …

Design And Simulation Of Anti-Resonant Hollow-Core Fiber For Sensing Applications, Pravallika Kante

Theses and Dissertations

This thesis presents the design and simulation of an 8-tube single-ring anti-resonant hollow-core fiber for sensing applications, with particular emphasis on methane gas detection at the fundamental absorption wavelength of 3.3 µm. Conventional solid-core silica optical fibers exhibit strong multi-phonon material absorption beyond 2.5 µm, rendering them fundamentally unsuitable for efficient light guidance and direct gas sensing at mid-infrared wavelengths. Anti-resonant hollow-core fibers overcome this limitation by guiding light predominantly through an air-filled hollow core via the anti-resonant reflecting optical waveguide mechanism, in which the thin silica glass walls of the cladding tubes act as Fabry-Pérot etalons that confine the …

Building Services Engineering March/April 2026

Building Services Engineering

No abstract provided.

Journal Of Roleplaying Studies And Steam (Jrpssteam) Vol. 5 [2026], Número 1 (Issue 1), Romano Ponce-Díaz Phd, Cristo Leon, Ivan Avila, Sarah Lynne Bowman, Kjell Hedgard Hugaas, Alexandra Schreiber Ma, Jaime Eduardo García Maya, Víctor Emmanuel Quintana Villarreal Vic Emma, Francisco Gonzalez Ing., Daniel Romero Benguigui, Antonio Roda-Martínez

Journal of Roleplaying Studies and STEAM

El presente número del Journal of Roleplaying Studies and STEAM examina la convergencia entre las prácticas lúdicas, el diseño narrativo y los procesos de mediación sociocultural en la investigación contemporánea. Las contribuciones reunidas en este número abordan el juego de rol como un dispositivo de producción de conocimiento, intervención psicoeducativa y reelaboración de representaciones culturales. Nos podemos atrever a señalar que la educación es la convergencia entre la ludología, las ciencias sociales, los estudios visuales y el análisis cultural; entendiendo a la educación como la actividad consciente e intencionada de transmitir información y conocimientos a las siguientes generaciones.

Martin Heidegger …

Investigation Into The Effects Of Moderate-Dose Radiation On Ligament Biomechanics, Andrew Landefeld

All Theses

Recent advances in arthritis treatment pin ionizing X-ray radiation as a useful tool in reducing joint pain and immune response. However, due to a lack of fundamental research in the effects of low-dose ionizing radiation on tendon and ligament biomechanics, the safety of these studies is rather unknown. While most related studies investigated cellular response to low dose treatment, surrounding tissue physiology is left out of the picture. Additionally, moderate range doses of irradiation are rarely studied, as most uses of radiation on tendons and ligaments are for sterilization of cadaver tendons for allografts. This study provides a preliminary investigation …

Laser-Induced Acoustic Signal Generation, Resonance Characterization, And Optical Sensing In Metallic Plates, Xinghang Zhao

All Theses

This thesis investigates laser-induced acoustic signal generation, resonance characterization, and optical sensing in metallic plates as a foundational study for damage-sensitive inspection. Rather than presenting a complete defect-detection system, the work focuses on how measurable acoustic responses can be generated, amplified, and interpreted in a controlled laboratory setting. Experiments showed that pulsed-laser excitation can produce strong and repeatable acoustic responses in metallic structures. Repetition-rate sweeping identified narrow resonant responses, including a cantilever resonance at 57.862 kHz and a maximum circular-disk response at an FFT frequency of 48.8 kHz with a laser repetition rate of about 49.1 kHz. High-Q resonances exceeding …

The Impact Of Dipeptides On Product Quality In Chinese Hamster Ovary Cells, Louise C. Herman

All Theses

Biopharmaceuticals are medicines produced in cells which are used to treat diseases such as cancer. Monoclonal antibodies (mAbs) represent the majority of approved biotherapeutics. MAbs are mostly produce using Chinese hamster ovary (CHO) cells. CHO cells are favored for resiliency, scalability, and established safety, and are considered the “workhorse” organism for biopharmaceuticals.  Amino acids are a key component of cell culture media, however several amino acids have solubility limits, such as cysteine, cystine, and tyrosine.  At neutral pH, these amino acids are poorly soluble.  However, dipeptides, such as N,N'-di-L-Alanyl-L-Cystine (ACCA) have been reported to increase cysteine and cystine availability. Further, …

Design And Development Of A Perfusable Hydrogel Platform With Bioprinted Human-Endothelialized Microvascular Channels, Calvin A. Chernyatinskiy

All Theses

We developed an integrated bioprinting and perfusion platform to generate vascularized hydrogel constructs that support perfusable microchannel networks. Multiple hydrogel formulations, sacrificial ink systems, device geometries, and perfusion conditions were systematically evaluated to optimize print fidelity, mechanical stability, and cellular compatibility. Internally gelling alginate–calcium carbonate hydrogels were identified as a robust matrix, providing tunable gelation kinetics and structural stability during embedded printing. In parallel, Pluronic F-127 fugitive ink enabled reliable fabrication of continuous hollow channels due to its shear-thinning behavior and efficient post-print removal.

The finalized platform integrates stereolithographically fabricated perfusion chambers with extrusion-based bioprinting to produce three-dimensional, perfusable vascular …

Moodify: A Mood-Based Music Recommendation System, Meghana Kagitha

Theses and Dissertations

Music has long been recognised as a powerful tool for emotional regulation, yet existing music streaming platforms often fail to align song recommendations with a user's current emotional state. Moodify is a mood-based music recommendation system designed to bridge this gap by delivering personalised playlists that reflect how a user feels in real time.

This project presents the design, development, and evaluation of Moodify, a mobile application that leverages the Circumplex Model of Emotion to capture user mood through an intuitive two-dimensional valence-arousal interface. Rather than relying on text input or manual search, users plot their emotional state directly onto …

Analyzing The Writing Style Of Generative Ai When Prompted With Writing Samples, Samuel Mcdowell

Senior Honors Theses

Authorship attribution is an important topic in today’s world of Large Language Models (LLMs). It is the technology that helps to verify the author of a written work. This study explores whether LLMs can successfully mimic an individual’s writing style if they are given a text sample. A dataset of human-written texts was collected and used to prompt several LLMs to generate new texts that attempt to replicate the original author’s stylistic characteristics. The generated texts were then tested with modern authorship attribution models to determine whether they would be identified as being written by the original author. The results …

Detecting Sophisticated Cyberattacks On Public Water Infrastructure, Ayrton Purdy

Graduate Theses and Dissertations (2019 - present)

In recent years there has been an increasing number of cyberattacks on public water generation and distribution systems. Advanced persistent attackers could usurp sensors and control systems to contaminate public drinking water. In order to conceal their malicious activity, they can manipulate sensor data flows to give the appearance of normal activity. The compromised sensors would report normal chemical levels even though unsafe water is entering the distribution system. In response, this research proposes a multi-sensor, cross-comparison approach to anomaly detection. The proposed approach is designed to detect sophisticated cyberattacks which are not easily detectable using traditional cyber tools. The …

Demonstration Of The Relationship Between Irwin Spire Quantity And Boundary Layer Depth In The Chemical Hazards Research Center Wind Tunnel, Jace D. Beckwith

Chemical Engineering Undergraduate Honors Theses

Atmospheric Dispersion Models (ADMs) are computer-based simulations used to model gas releases for enforcing regulatory compliance, designing facilities, and responding to emergencies. Because ADMs rely on complex mathematical models, they require experimental validation to ensure accuracy. Wind tunnels offer a controlled, repeatable method for gathering validation data. The Chemical Hazards Research Center (CHRC) at the University of Arkansas operates an ultra-low speed wind tunnel for this purpose. A key feature of this tunnel is its simulated Atmospheric Boundary Layer (ABL). The simulated ABL is a turbulent layer in which wind speed increases logarithmically with height from near zero at the …

Development Of A Laboratory Apparatus For Evaluating Infiltration Performance Of Filter Strips In Utah, Pranish Dahal

All Graduate Theses and Dissertations, Fall 2023 to Present

Stormwater from Utah’s roadways often carries pollutants such as oil, metals, and sediments, especially during small storms when runoff is not diluted. Vegetated filter strips—areas of soil and vegetation placed alongside roads—are one of the most effective ways to capture and clean this runoff before it reaches rivers and lakes. However, choosing the right combination of topsoil and base soil for these filter strips is difficult, expensive, and traditionally requires multiple field visits.

This thesis introduces a laboratory device that allows engineers to test how different soil combinations absorb and filter water without having to go to the field each …

Examining Motivations And Perceptions In Secondary Technology And Engineering Education: A Gendered Analysis Using The Fit-Choice Scale, Abigail Villanueva

All Graduate Theses and Dissertations, Fall 2023 to Present

This study examined why individuals choose to become secondary technology and engineering education (TEE) teachers and whether motivations differ between men and women. TEE programs help prepare students for careers in science, technology, engineering, and math (STEM), yet schools face teacher shortages and low female representation in the field. Understanding what draws people to this profession can support better recruitment and retention efforts. Sixty-six current TEE teachers completed a survey about the factors that influenced their decision to teach. Overall, the strongest motivations were a personal interest in teaching, enjoyment of working with young people, and the desire to make …

A Systems Engineering-Based Method For Enabling Digital Transformation In A Binational Small Healthcare Enterprise, Manuel Adrian Alvarez Ramirez

Open Access Theses & Dissertations

The year 2020, often described as "the great accelerator" for emerging technologies, marked a period of significant transformation in lifestyles, work patterns, and business strategies. For instance, online meetings have become more convenient than in-person interactions, even with colleagues in neighboring offices. For small businesses, rapid regulatory and technological changes required swift adaptation, including the acquisition of new technologies, tools, and software to ensure survival. This transition also necessitated adopting indirect engagement, revising communication protocols, and digitally transforming information. Small and Medium-sized Enterprises (SMEs) in essential service sectors face also a fundamental paradox: their dependence on the skills, relationships, and …

Bridging Industry And Academia In Engineering Leadership Education: Using Q Methodology To Identify The Viewpoints Of Engineering Professionals On Effective Engineering Leadership, Pamela Edith Campos Valles

Open Access Theses & Dissertations

Background: Engineering leadership has been recognized as a key professional skill by the U.S National Academy of Engineering, leading to increased attention and integration in engineering education research and development. The perception and recognition of leadership within the engineering field remains limited by the widespread definitions of leadership and limited characterization of engineering leaders. The Contextual Engineering Leadership Development framework is grounded on a discipline specific definition of engineering leadership and approaches to leadership development derived from engineering undergraduate programs. The use of this framework provides the opportunity to describe what engineering leaders prioritize, enabling the identification and characterization of …

Electrical Resilience In Water Treatment Plants: An Extreme Weather And Lightning Protection Study, Genesis Martinez

Theses and Dissertations

Water treatment plants (WTPs) are vital infrastructure systems that depend on sensitive electrical, electronic, and control equipment to ensure the continuous supply of safe drinking water and effective wastewater treatment. As global temperatures rise and climate change accelerates, the frequency and intensity of extreme weather events—such as hurricanes, flooding, and increased lightning activity—are becoming more pronounced. These events pose significant risks to the electrical resilience of water treatment facilities, often leading to power outages, equipment failures, grid instability, and prolonged service disruptions. This report explores the impacts of extreme weather, with a particular focus on lightning and electrical surges, on …

From Reactive To Predictive: A Hybrid Trust-Mediated Adoption Framework For Data-Driven Maintenance In Distributed-Authority Aviation Environments, Dustin J. Foote

International Journal of Aviation, Aeronautics, and Aerospace

Modern aviation maintenance operates within increasingly data-intensive technological environments, yet the operational integration of predictive maintenance into routine decision-making remains inconsistent across sectors. Contemporary aircraft incorporate centralized maintenance computers and condition monitoring architectures capable of fault aggregation, exceedance capture, and trend-based data collection. Although prognostics and health management research continues to advance detection and prediction methods, implementation outcomes often depend on factors beyond analytical performance alone.

This paper examines predictive maintenance adoption in distributed-authority aviation environments and argues that constraints emerge less from sensing capability than from organizational structure, decision authority dispersion, and institutional trust dynamics. For purposes of analysis, …

Digital Twin–Oriented Certification Architecture For Advanced Air Mobility, Daniel Pleffken

International Journal of Aviation, Aeronautics, and Aerospace

Advanced Air Mobility (AAM) systems introduce certification challenges associated with distributed propulsion, increasing software reliance, and tightly coupled architectures. These characteristics evolve within regulatory environments that are still adapting to emerging vehicle concepts. While digital engineering practices are increasingly adopted during system development, certification workflows remain largely document-centric, limiting lifecycle traceability and consistent reasoning about change impacts as designs and regulatory interpretations evolve. This paper proposes a Digital Twin–oriented certification architecture that integrates regulatory knowledge, system representations, Means of Compliance (MoCs), and verification artifacts within a unified model-based environment. The architecture is organized around four elements: regulatory structuring, Model-Based Systems …