Digital Commons Network^™

Doctoral Program In Computing Technology Specialization In Computer Education, Information Sciences, Training And Learning 1992-1993 Catalog, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Center For Computer And Information Sciences--Doctor Of Science In Computer Information Systems 1992-93, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Mixed‐Cation Oxide Powders Via Resin Intermediates Derived From A Water‐Soluble Polymer, Lone‐Wen ‐W Tai, Harlan U. Anderson, Paul A. Lessing

Materials Science and Engineering Faculty Research & Creative Works

Sub micrometer powders of complex oxides were prepared via resin intermediates based on a starch type of organic precursor. A commercially available water‐soluble starch derivative was (for the first time) used as the organic base for solution synthesis of ceramic powders. Calcination of the charred, fluffy, amorphous resins at a temperature below 600°C for 4 h yielded perovskite powders of Sr‐doped LaMnO₃ and Sr‐doped La(Fe,Co)O₃. Sr‐doped LaCrO₃ needed to be calcined above 750°C to ensure phase purity and to remove organic residue. Due to the low cost of starch derivatives, the process has the potential of …

Laboratory Evaluation Of Prefabricated Highway Edge Drains, Ahmed Mohamed Elsharief

JTRP Technical Reports

This study evaluated prefabricated highway edge drains to improve the existing practice and to set guidelines for their proper selection. Two primary evaluations received attention: the first was the effect of installation and in service loading on the hydraulic and strength capacities of a prefabricated highway edge drain; and the second was the performance of the geotextile filter.

A limited field evaluation of prefabricated highway drains indicated structural failure of the core and an inefficient geotextile. Based on, the field study, laboratory testing and theoretical modeling, guidelines were given for the strength and hydraulic requirements of the drain. A retention …

The Risk Of Reliance On Perceived Risk, Frank B. Cross

RISK: Health, Safety & Environment (1990-2002)

Professor Cross's comment is closely related to the debate between Thompson and Valverde. Using examples that do not commonly appear in the "Risk" literature, he argues that: Giving weight to perceived Risk may seem liberal insofar as it gives more say to the "little guy," but giving perceived Risk too much weight could have distinctly illiberal social consequences.

Parameter Sensitivity And Optimization Predictions Of A Hydrogen/Oxygen Alkaline Fuel Cell Model, Michael C. Kimble, Ralph E. White

Faculty Publications

A mathematical model is used to predict parameter sensitivities and optimal design parameters for a hydrogen/oxygen alkaline fuel cell. A sensitivity analysis of the various transport and electrode kinetic parameters indicates which parameters have the most influence on the predicted current density and over which range of potentials these parameters affect the fuel-cell performance the most. This information can be used to decide which parameters should be optimized or determined more accurately through further modeling or experimental studies. The effect of various design parameters on the limiting current density are investigated to determine if optimal values exist for the parameters. …

Reduction Of Chromium (Vi) When Solar Selective Black Chromium Is Deposited In The Presence Of Organic Additive, Branko N. Popov, Ralph E. White, D. Slavkov, Z. Koneska

Faculty Publications

Electrochemical dc methods were used to study the reduction of chromium (VI) in the presence of organic additives. It is shown that F^–, thiourea, and citric acid are essential to enable deposition of black chrome from concentrated chromic acid solutions. A new formulation of the plating bath is defined. The optimum operating conditions under which spectrally selective surface of black chrome is deposited have been determined.

Nonparametric Stratigraphic Interpretation From Drill Log Data, Upmanu Lall, A. I. Ali

Reports

Near surface groundwater contamination is a widespread problem. The potential for contamination of deep aquifers in such areas depends on the vertical hydraulic gradient as well as the extent and location of interconnection between the upper and lower aquifers. In alluvial, sedimentary environment, the geologic units are typically weakly connected lenses or layers of high or low conductivity with variable size, geometry and orientation. Drill logs provide qualitative, local information on such aquifer heterogeneities. A binary (high or low conductivity) indicator function is used to describe the aquifer system. A nonparametric statistical methodology for assessing the probability that a particular …

Fate And Transport Of Tce-Petroleum Hydrocarbon Mixture At Uttr, G. Nash Quashiga, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

In 1988 a preliminary assessment (PA) study was conducted at Chemical Disposal Pit No. 4 to address several concerns of Hill Air Force Base (HAFB), the facility operators. The objectives of the PA were; i) to assess the potential for organic chemical releases to the subsurface environment, and ii) to determine the need for any immediate control measures, if the subsurface environment were threatened.

An Optical Adaptive Resonance Neural Network Utilizing Phase Conjugation, Donald C. Wunsch, D. J. Morris, T. P. Caudell, R. A. Falk

Electrical and Computer Engineering Faculty Research & Creative Works

An adaptive resonance (ART) device has been conceived that is fully optical in the input-output processing path. It is based on holographic information processing in a phase-conjugating crystal. This sets up an associative pattern retrieval in a resonating loop utilizing angle-multiplexed reference beams for pattern classification. A reset mechanism is used to reject any given beam, allowing an ART search strategy. The design is similar to an existing nonlearning optical associative memory, but it does allow learning and makes use of information the other device discards. This device is expected to offer higher information storage density than alternative ART implementations.

Grain Size Effect On The Induced Piezoelectric Properties Of 0.9pmn-0.1pt Ceramic, U. Kumar, Wayne Huebner, P. Marsh, H. Kankul, S. F. Wang, Clyde G. Oakley

Materials Science and Engineering Faculty Research & Creative Works

Lead magnesium niobate-lead titanate (Pb(Mg_1/3Nb_2/3)O₃ - PbTiO₃ (PT) solid solutions have been widely researched to produce devices that can be used in low- and high-electric-field applications. For some applications, such as medical ultrasonic transducers, it is necessary to prepare the ceramic with high density and small average grain size. The effect of grain size on the low- and high-field properties of 0.9-PMN-0.10-PT ceramics is described in the present work. To prepare highly dense ceramic, vibratory and attrition milled powders were sintered between 1000 and 1250 ⁰C. The average grain sizes of the sintered ceramics …

A Wear Analysis Study Of Selected Alternative Foundry Tooling Materials Using Impact Abrasion Testing, L. Fred Vondra

Dissertations and Theses @ UNI

The purpose of this study was to simulate the wear characteristics of foundry tooling using an impact abrasion test apparatus. The wear characteristic was exhibited by non-metallic materials and was measured as a function of percentage weight loss and was benchmarked against Class 30 gray iron. The research question focused on whether or not a non-metallic material exists that exhibits comparable or superior wear characteristics to Class 30 gray iron for possible consideration as tooling materials for foundry applications. The information obtained adds to knowledge and is useful to foundry professionals in making tooling decisions.

The 34 test materials were …

Method Of Making Highly Sinterable Lanthanum Chromite Powder, Von Richards, Subhash C. Singhal

Materials Science and Engineering Faculty Research & Creative Works

A highly sinterable powder consisting essentially of LaCrO.sub.3, containing from 5 weight % to 20 weight % of a chromite of dopant Ca, Sr, Co, Ba, or Mg and a coating of a chromate of dopant Ca, Sr, Co, Ba, or Mg; is made by (1) forming a solution of La, Cr, and dopant; (2) heating their solutions; (3) forming a combined solution having a desired ratio of La, Cr, and dopant and heating to reduce solvent; (4) forming a foamed mass under vacuum; (5) burning off organic components and forming a charred material; (6) grinding the charred material; (7) …

Electromagnetic Wave Scattering From Magnetic Fluctuations In Tokamaks, L. L. Vahala, G. Vahala, N. Bretz

Electrical & Computer Engineering Faculty Publications

Cross sections are calculated for electromagnetic wave scattering and mode transformation from magnetic and density fluctuations in a homogeneous plasma. For the special case of scattering perpendicular to the magnetic field, density fluctuations scatter ordinary to ordinary and extraordinary to extraordinary modes-but cannot transform these modes. On the other hand, magnetic fluctuations perpendicular to the field can transform modes but cannot scatter on a single branch. For incident frequencies on the order of the electron plasma frequency or gyrofrequency, the cross sections for scattering and transformation due to field and density fluctuations have a similar value. Estimates are given for …

Frictional Resistance Of Geotextiles, Md. Khairul Alam

Theses

The pullout resistance of geotextiles was examined using pullout tests. A suitable wooden box with large (2 ft x 2 ft x 4 ft) dimensions was used to avoid the effect of boundary and to simulate field conditions. Two types of failure patterns were observed. For shallow embedment (<3 ft), geotextile produced a movement of the surrounding mass of sand in the shape of an inverted cone due to interlocking friction between geotextile and sand particles. The cone angle decreases with increase in depth of embedment. For embedment equal to or greater than 3 ft., no sand cone developed and the failure occurred along the interface of geotextile and sand. For 1 ft. surcharge, the increase in the pullout resistance due to combined horizontal and vertical embedment was about 30 %.

Development Of Cellular Manufacturing Systems For Overall Production Efficiency, Srinivas Lokula

Theses

For years the industrial job shop is facing an increase in complexity and decline in productivity due to increase in parts mix, volume of parts, plant size, machine production rates and part complexity. The development of Group Technology and Cellular Manufacturing seeks to eliminate or minimize complexity and to maximize productivity.

Cellular manufacturing is the physical division of job shop's manufacturing machinery into production cells. Each cell is designed to produce parts requiring similar machinery and machine operations. Cellular manufacturing is one of the best manufacturing techniques to support Just In Time manufacturing and Total Quality Management.

This thesis work …

Biodegradation Of Tnt (2,4,6-Trinitrotoluene), Jin Lou

Theses

This study summaries the results of various methods treating 2,4,6-trinitrotoluene (TNT). Review of available literatures revealed that the most commonly used techniques in full-scale plant for TNT removal are chemical oxidation and carbon adsorption.

From economic point of view, the biological treatment system will be much more cost-effective. Various methods for improving the efficiency of biological system treating TNT wastewater were developed in the laboratory. Current laboratory results show that by isolating appropriate microorganisms under adequate conditions, TNT wastes can be degraded successfully.

At the some time, some pretreatment technologies are recommended in this study for improving the performance of …

Computer Aided Design Of A Broadband Microwave Power Divider, Jaideep Mukherjee

Theses

The purpose of this thesis to provide alternative design procedure for a power divider that has broadband characteristics. The Wilkinson power divider consisting of cascaded quarter wave sections is known to increase the bandwidth while maintaining high isolation and good match conditions at individual ports. Resistors placed between the quarter wave sections served to increase isolation. The values of required components were determined using odd and even mode analysis. In this work, the approximate theory developed previously is used as a preliminary design model, and it is extended further by considering optimization techniques and coupling between adjacent arms. This novel …

Acuta Enews December 1991, Vol. 20, No. 12

ACUTA Newsletters

In This Issue

10-XXX gives occasion for fraud

President's Message

YaleNET, a variety of services

Think ahead to prevent fraud

MOREnet links 12 campuses

Positions available

The Calendar - December 1991, Nova University

The Calendar

No abstract provided.

Structured Hypermedia Application Development Model (Shadm): A Structured Model For Technical Documentation Application Design, Peter W. Cassell

Theses and Dissertations

This research was conducted to determine how a Royal Australian Air Force technical maintenance publication could be transformed into a task oriented hypermedia application and to develop a model that could be used for future similar transformations. The model was developed following in-depth analysis of the existing USAF F-15E maintenance publication set and validation was conducted using a prototype developed in HyperWriter, a commercial hypermedia product. The prototype model was based around the performance of three maintenance tasks on an aircraft sub-subsystem and incorporated online user access to the necessary support data for task completion. Publication managers, producers, and users …

Radar Scattering From Foamed Plastic Target Supports, Michael W. Chambers

Theses and Dissertations

This study investigates the scattering from foamed ranges to support all sizes of targets for radar cross section measurements. Two common foamed plastics, styrofoam and expanded bead polystyrene (EPS), are discussed. Two types of scattering are associated with foamed plastic, coherent and incoherent. The incoherent is normally the lowest, but has not been satisfactorily quantified. Coherent scattering is related to the shape of the target, and the emphasis of this study is on the coherent return. One goal was to predict the coherent RCS of an EPS column using the Uniform Theory of Diffraction (UTD). It was found that UTD …

A Rigorous Uniform Diffraction Analysis Of The Electromagnetic Scattering From Impedance Edges And Junctions, Joseph C. Fortney

Theses and Dissertations

This paper investigates the scattering from impedance strips and impedance-loaded conducting strips. The impedance strips are analyzed using Senior's impedance half plane formulation. Once the primary diffraction from the impedance half plane is presented, it is used to develop multiple diffraction mechanisms on an impedance strip. The scattering from impedance-loaded strips are analyzed using Maliuzhinets' impedance wedge formulation. The primary diffraction mechanism from an impedance wedge is used to develop the multiple diffractions on an impedance double wedge. The multiple diffractions on both types of strips are developed using the Extended Spectral Ray Method. Sample calculations are made for impedance …

Determination Of Bistatic Radar Clutter Power From Topographic Data, Clyde R. Heddings

Theses and Dissertations

The purpose of this research was to develop a procedure for estimating the average bistatic radar clutter power from a topographic map using rough surface scattering theory. First, the terrain in the radar target area was divided into sub regions having homogeneous characteristics. A joint Gaussian distribution for the surface heights was fitted from the information contained in the topographic map contour lines for each homogeneous area. From these distributions, the normalized radar cross section for each terrain area was determined. The clutter power for each range cell was then determined via a modified radar range equation. The procedure was …

Wave Propagation In A Randomly Inhomogeneous Medium - A Study Of The Problem, Kyle Hunter

Theses and Dissertations

The problem of calculating the scintillation index of an atmospherically propagating spherical wave is examined. The fourth statistical moment of the complex field is obtained by using Feynman (path) integral techniques applied to the stochastic parabolic equation. The general trajectory of each Feynman integral is approximated by a truncated Fourier-sine series and the infinite-fold integration of the Feynman integral is reduced to a three-fold Riemann integral which is shown to match results derived under different assumptions. This thesis is highly tutorial.

Comparison Of Afitpac Versus Nos And A Packet Radio Network Design, Thomas A. Iannelli

Theses and Dissertations

This thesis encompasses two themes: (1) A comparison of the Network Operating System (NOS) software package, developed by Phil Karn and others, and AFITPAC, written by Marsh and Geier at the Air Force Institute of Technology. The comparison is based on the Air Force Logistics Command's requirements for the development of a Packet Radio Network program. The results of the comparison are a recommendation that use of the NOS package be pursued because it can meet all twelve of the requirements and compiles with five of the Military Standard Protocols. (2) The design of a personal computer Packet Radio Network …

Image Analysis Using Gabor Transforms: Correlated With Human Saccadic Movement Data To Identify The Human Visual Search Strategy, Ralph J. St John

Theses and Dissertations

This thesis investigated whether a relationship exists between the Gabor Correlation Coefficient (GCC) magnitudes of fixation points for a set of images viewed by six subjects and the human visual search strategy. A couple of different relationships were investigated. First, the data were analyzed to determine if the GCC magnitudes of human fixation points predicted the time ordered sequence of human fixation points during the performance of a visual search. Second, the data were analyzed to determine if there was a significant difference between the GCC magnitudes of the human fixation points and the GCC magnitudes of a random set …

Electromagnetic Scattering From Dielectric Pyramidal Tips, Albert D. Tyson Iv

Theses and Dissertations

This thesis investigated the electromagnetic scattering from conducting, lossless dielectric, and lossy dielectric (absorber) pyramids. The backscatter from pyramids was measured and a time gate was applied to isolate the scattering from the tips. The measured results were compared to predictions from an approximate Uniform Theory of Diffraction (UTD) solution for scattering by a dielectric corner. The accuracy of the corner diffraction solution was found to be dependent on the polarization of the incident electric field. The accuracy of the UTD solution was also dependent on the aspect angle to the pyramid: the UTD solution gave a nominally correct answer …

Acuta Enews November 1991, Vol. 20, No. 11

ACUTA Newsletters

In This Issue

President's message

Distance learning in Maine

FCC backs phone-line video

Pooling purchasing power

Area code shortage

Positions available

The Calendar - November 1991, Nova University

The Calendar

No abstract provided.