Digital Commons Network^™

The Development Of A Prototype Congestion Management System For The State Of Indiana: Phase 1, Nishantha R. Gunawardena, Kumares C. Sinha

JTRP Technical Reports

This study details a comprehensive set of guidelines and a work-plan that consists of nine elements that need to be developed in implementing a congesion management system. A procedure has been developed by means of which congestion on roadway links can be identified at a macroscopic level using daily volume counts (ADT) after which, links that are identified as being congested will be subjected to a more detailed microscopic study using hourly volume counts to determine extent, duration and severity of congestion.

On Stationary And Moving Interface Cracks With Frictionless Contact In Anisotropic Bimaterials, Xiaomin Deng

Faculty Publications

The asymptotic structure of near-tip fields around stationary and steadily growing interface cracks, with frictionless crack surface contact, and in anisotropic bimaterials, is analysed with the method of analytic continuation, and a complete representation of the asymptotic fields is obtained in terms of arbitrary entire functions. It is shown that when the symmetry, if any, and orientation of the anisotropic bimaterial is such that the in-plane and out-of-plane deformations can be separated from each other, the in-plane crack-tip fields will have a non-oscillatory, inverse-squared-root type stress singularity, with angular variations clearly resembling those for a classical mode II problem when …

Modeling Technique For Optimal Recovery Of Immiscible Light Hydrocarbons As Free Product From Contaminated Aquifer, Grant S. Cooper Jr., Richard C. Peralta, Jagath J. Kaluarachchi

Civil and Environmental Engineering Faculty Publications

Contamination sites associated with light non-aqueous phase liquids {LNAPL) are numerous and represent difficult cleanup problems. Remediation methods for cleanup of LNAPL fluids in subsurface systems are continuously evolving with the development of various technologies for pump.-and~treat, soil venting, and in-situ bioremediation. Evaluating the effectiveness of remediation techniques as well as attempting to improve their efficiency has been a focus of many researchers, These efforts have included the development of computer simulation models to predict and analyze the fluid movement, entrapment, and mobilization of three~phase systems in porous media. The capability of computer models that not only simulate but optimize …

Acuta Enews December 1993, Vol. 22, No. 12

ACUTA Newsletters

In This Issue

Board Report

President's message

Telecom talks $$$ at UNM

US West to test high speed transmission

Big MAN on campus

Student toll fraud

Bulletin 4265 - Termites, Peter Davis

Bulletins 4000 -

Termites are small, soft-bodied, social insects that feed on wood, grass, dead leaves, bark, humus, fungi or the dung of herbivore. They are commonly known as white ants, but are not related to true ants.

There are over 2300 species of termite of which about350 occur in Australia, and of these about 12 damage sound timber.

The Use Of Videotape During Post-Flight Debriefing Of Simulator Flights To Improve Student Learning And Reduce Instructional Time, Stanley Paul Rowe

Master's Theses - Daytona Beach

The purpose of this study was to determine if videotaping students during simulator flights and using the results as a teaching tool would improve student learning and require less instructional time. Thirty subjects were randomly selected from students enrolled in an instrument rating flight course at Embry-Riddle Aeronautical University. A Frasca 141 simulator and a Panasonic video camera were used as the data gathering instruments. The treatment group reviewed the instructional lessons on videotape during their post-flight debriefing. At the end of the experiment, both groups received a posttest. The results of the posttest and the amount of instructional hours …

Shock Wave Interaction With L-Shaped Structures, Richard C. Miller

Theses and Dissertations

This study investigated the interaction of shock waves with L-shaped structures using the CTH hydrodynamics code developed by Sandia National Laboratories. Computer models of shock waves traveling through air were developed using techniques similar to shock tube experiments. Models of L-shaped buildings were used to determine overpressures achieved by the reflecting shock versus angle of incidence of the shock front. An L-shaped building model rotated 45 degrees to the planar shock front produced the highest reflected overpressure of 9.73 atmospheres in the corner joining the two wings, a value 9.5 times the incident overpressure of 1.02 atmospheres. The same L-shaped …

Wildlife Exposure Factors Handbook, Volume I Of Ii, United States Environmental Protection Agency

United States Environmental Protection Agency: Publications

The Exposure Assessment Group of the Office of Health and Environmental Assessment (OHEA) has prepared the Wildlife Exposure Handbook in support of the Office of Solid Waste and Emergency Response and the Office of Water. The Handbook provides information on various factors used to assess exposure to wildlife. The goals of the project are (1) to promote the application of risk assessment methods to wildlife species, (2) to foster a consistent approach to wildlife exposure and risk assessments, and (3) to increase the accessibility of the literature applicable to these assessments.
The bulk of the document summarizes literature values for …

Pavement Drainage And Pavement Shoulder Joint Evaluation Numerical Analysis Of Infiltration And Drainage In Pavement Systems, Reynaldo David. Espinoza, Philippe L. Bourdeau, Thomas D. White

JTRP Technical Reports

The continuing loss of pavement performance observed in the U.S. transportation infrastructure system raises the issue of the subdrainage design. Experience with the Indiana highways indicates that the lack of adequa the sub-drainage is probably a major cause of pavement distress. In order to provide highway engineers with a methodology to analyze the water migration and drainage into pavement systems a new numerical model has been developed. The numerical scheme is a finite difference formulation of the equations of water flow in unsaturated porous media. The resulting system of equations used is nonlinear and state-of-the-art numerical techniques have been used …

An Object-Oriented Database Interface For Ada, Anthony D. Moyers

Theses and Dissertations

Object data management ODM is currently at the forefront of research and development efforts in the database community. In order to take advantage of ODM technology, the Department of Defense DoD needs to ensure that these systems are accessible to Ada programmers. The Air Force Institute of Technology AFIT is conducting research towards the development of an Ada ODM interface to existing ODM systems. The design goals are portability, transparency, and completeness for Ada programmers. Portability means that the ODM system can be changed without affecting any existing application programs. Transparency means that Ada programmers can use the interface without …

A Study Of Two Dimensional Tapered Periodic Edge Treatments To Reduce Wideband Edge Diffraction, Russell A. Burleson

Theses and Dissertations

This is a brief summary of a study to reduce diffraction from an infinite two dimensional edge using tapered periodic surfaces. The concept is to use the impedance characteristics of a periodic surface to create a tapered impedance much like a tapered resistance commonly used for diffraction reduction. This approach has several advantages over. tapered resistive treatments to include ease of fabrication, better engineering control of the impedance and negligible loss absorbed by the ta per. In this study, four periodic tapers were design, built and tested. These tapers were also modeled using a variety of numerical techniques. The results …

Shielded Coil Electrodynamic Propulsion (Scep). A Feasibility Study, Richard J. R. Ladouceur

Theses and Dissertations

This study investigated Shielded Coil Electrodynamic Propulsion SCEP. The use of the earths magnetic field as a propulsion source has been previously investigated. It was found that a significant amount of power and long conductors were required. A more compact propulsion concept which requires significantly less power is proposed. This concept relies on the feasibility of significantly reducing the magnetic force induced by the earths magnetic field on selected segments of a coil. An experiment design to support the theoretical findings was conducted. The experiment results support the theoretical model.

Guidelines For Ensuring Software Supportability In Systems Developed Under The Integrated Weapon System Management Concept, Forrest F. Butts Iii, Anthony C. Johndro

Theses and Dissertations

This thesis studied the software maintenance planning and practices of the pilot Integrated Weapon System Management IWSM programs. Before IWSM, a System Program Office SPO acquired an Air Force weapon system then passed it to an Air Logistics Center ALC for follow-on support. The ALC was forced to maintain the software despite its questionable maintainability. The SPO de- emphasized maintainability because maintenance was an ALC responsibility and building maintainable software increased development costs and lengthened schedules. The IWSM philosophy closes the gap between development and maintenance. A System Program Director SPD, who oversees both system development and maintenance, has an …

Toward Virtual Digital Mammograms For Research And Training In Tumor Detection, Charles F. Babbs, Leslie A. Geddes

Weldon School of Biomedical Engineering Faculty Working Papers

Research in the processing, compression, transmission, and interpretation of digital radiographic images requires evaluation of a wide variety of test images, varying in format, in spatial resolution, and in anatomic content. To evaluate the diagnostic performance of observers using novel versus conventional image formats, large numbers of test images containing known abnormalities are required. This report describes a method for creating high resolution, virtual digital mammograms from computational models of the human breast that include branched lobulated ducts and suspensory ligaments embedded in fatty subcutaneous tissue. Breast phantoms may include any of three types of simulated tumors (fibroadenomas, invasive ductal …

Development Of Stereoscopic Particle Tracking Velocimetry For Turbulent Flow Field Diagnostics, Veera P. Rajendran

Electronic Theses and Dissertations

Stereoscopic particle tracking velocimetry (SPTV) was used to analyze a turbulent submerged jet of Reynolds number (based on the diameter of the nozzle) 8000. SPTV involves tracking the motion of tracer particles over time in a flow in three dimensions. The first part of this work consisted of developing a stereoscopic particle tracking technique using two high-speed video cameras. This included calibration of the cameras with "known" points, and developing an algorithm to automatically match and track particles. The second part was to apply the same to a submerged water jet in order to measure velocities. The velocities were subsequently …

Nitric Oxide Production: A Mechanism For Inhibition Of Chlamydia Trachomatis Replication, Bojun Chen

Electronic Theses and Dissertations

Chlamydia trachomatis (CT) replicates in macrophages, but is inhibited by IFN-$\gamma$ or LPS. IFN-$\gamma$ and/or LPS induced nitrite production in mouse peritoneal macrophages, macrophage cell lines (RAW264.7 and J774A.1) and McCoy cells. Kinetic studies indicated that peak production occurred 48 hours post-treatment. CT infection itself was insufficient to induce nitrite production, but resulted in enhancement of nitrite production in IFN-$\gamma$-treated cells. Treatment with IFN-$\gamma$ or LPS resulted in significant inhibition of CT replication in these cells. Strong correlation between nitrite production and inhibition of CT replication was observed in RAW264.7 and J774A.1 cells (correlation coefficients: $-$0.93 and $-$0.94, p $<$ 0.001). N$\sp{\rm g}$- monomethyl-L-arginine (L-NMMA) specifically inhibited nitrite production and partially reversed inhibition of CT replication in macrophage cell lines. NOS mRNA was measured in RAW264.7 cells by Northern blot and Dot blot hybridization. Strong correlation between NOS mRNA expression and inhibition of CT replication (correlation coefficient: $-$0.97, p $<$ 0.05) was observed. Anti-TNF-$\alpha$ antibody completely neutralized the biological activity of TNF-$\alpha$ secreted by LPS-treated RAW264.7 cells, yet the antibody neither reduced nitrite production nor restored CT replication. Combination of the antibody and L-NMMA significantly enhanced restoration of CT replication. In peritoneal macrophages, inhibition of CT replication induced by IFN-$\gamma$ was partially restored by L-NMMA or anti-TNF-$\alpha$ antibody. In McCoy cells, inhibition of CT replication induced by IFN-$\gamma$ and LPS was not significantly restored by L-NMMA. Great restoration of CT replication by 1 mM L-NMMA was observed in LPS-treated J774A.1 cells (31%), but not in IFN-$\gamma$-treated cells (5%). Our data indicate that (1) NO production is one of the mechanisms for inhibition of CT replication in IFN-$\gamma$-activated peritoneal macrophages and RAW264.7 cells; (2) NO plays a significant role in CT inhibition in LPS-treated macrophage cell lines, but not peritoneal macrophages; (3) TNF-$\alpha$ may be associated with inhibition, but the mechanism(s) may not involve NO production; (4) NO production may not be the mechanism for CT inhibition in McCoy cells treated with IFN-$\gamma$ and LPS.

Developing A Graphical User Interface To Support A Real-Time Digital Signal Processing System, Jeffrey C. Miller

Theses and Dissertations

A graphical software user interface for a VMEbus-based real-time digital signal processing system was designed. Use, requirements were defined and the Rumbaugh object-oriented analysis and design technique was applied to analyze the requirements and produce an object-oriented design. The software design includes a graphical, mouse- and keyboard driven user interface, specialized hardware driver modules, and operating system interfaces. An implementation plan was also developed to map the design into the C programming language using existing system code, automatically generated code, and newly written code. Based on the implementation plan, a limited software system prototype w successfully developed and demonstrated. The …

Script-Based Qos Specifications For Multimedia Presentations, Richard Staehli, Jonathan Walpole

Computer Science Faculty Publications and Presentations

Multimedia presentations can convey information not only by the sequence of events but by their timing. The correctness of such presentations thus depends on the timing of events as well as their sequence and content. This paper introduces a formal specification language for playback of real-time presentations. The main contribution of this language is a quality of service (QOS) specification that relaxes resolution and synchronization requirements for playback. Our definitions give a precise meaning to the correctness of a presentation. This specification language will form the basis for a QOS interface for reservation of operating system resources.

Constructed Wetlands As An Innovative, Cost-Effective Solution For Wastewater Treatment In Small Communities, Christy Womack Vines

Honors Capstone Projects and Theses

No abstract provided.

Obscured Object Detection Via Bayesian Target Modeling Techniques, Rufus H. Cofer

Electrical Engineering and Computer Science Faculty Publications

Underground objects are by nature often severely obscured although the general character of the intervening random media may be reasonably understood. The task of detecting these underground objects also implies that their exact location and or orientation is not known. To partially counter these difficulties, one may; however, be given a model of the target of interest, e.g. a particular tank type, a water pipe, etc. To set up a quality framework for solution of the above problem, this paper utilizes the paradigm of Bayesian decision theory that promises minimum error detection given that certain probability density functions can be …

Local Needs Implementation For All Programs, James G. Harris, Madeleine M. Johnson, Norm Rogers, Jay Waddell

Electrical Engineering

SYNTHESIS is one of four ex1sting NSF Engineering Education Coalitions (there are apparently plans to add two others this year to bring the total number to six). SYNTHESIS consists of eight universities: Cal Poly, Cornell. Hampton, Iowa State, Southern, Stanford, Tuskgekee, and UC-Berkeley. It has been supported by NSF for over three years, being one of the first two-the other being ECSEL. The other two existing coalitions are GATEVI/AY and SUCCEED. One 9f the main goals of the 'SYNTHESIS coalition is the development of the National Engineering Education Dehvery System (NEEDS). After giving a brief overv1ew of the NEEDS, we …

National Engineering Education Delivery System (Needs), Alice M. Agogino, Sheri Sheppard, Kate Mink, James G. Harris, Lawrence Genalo, Jaya Krishnagopalan, Dave Martin, John Saylor

Electrical Engineering

The Synthesis Coalition, supported by the National Science Foundation and industrial partners, is comprised of the following eight educational institutions: California Polytechnic State University at San Luis Obispo, Comell, Hampton, Iowa State, Southern, Stanford, and Tuskegee Universities, and the University of California at Berkeley (1].

The National Engineering Education Delivery System (NEEDS) is an entirely new courseware development and distribution system which will provide Widespread, rapid, electronic access to an almost arbitrarily large number of diverse instructional modules (2-4). Curricular material in the NEEDS database are organized by a diverse range of indices. Links across disciplines are provided in the …

S/O Modeling Technique For Optimal Containment Of Light Hydrocarbons In Contaminated Unconfined Aquifers, Grant S. Cooper Jr., Jagath J. Kaluarachchi, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

An innovative approach is presented to minimize pumping for immobilizing a floating plume of a light non-aqueous phase liquid (LNAPL). The best pumping strategy is determined to contain the free oil product and provide for gradient control of the water table. This approach combined detailed simulation, statistical analysis, and optimization. This modeling technique uses regression equations that describe system response to variable pumping stimuli. The regression equations were developed from analysis of systematically performed simulations of multiphase flow in an areal region of an unconfined aquifer. Simulations were performed using ARMOS, a finite element model. ARMOS can be used simulate …

Engineering Design Of An Anaerobic-Aerobic System To Treat Chlorophenols, Chih-Ju Jou

Dissertations

The present work was aimed at determining the effect of the main operating parameters on the performance of an anaerobic-aerobic reactor system to degrade toxic chlorinated compounds. In previous work conducted in the Biological Treatment Lab at NJIT it was shown that this system is capable of achieving the complete degradation of chlorophenols. In that system, reductive dehalogenation took place in the first anaerobic reactor, which was followed by a second aerobic reactor in which the degradation products of the first reactor were mineralized. In the present work the role of a number of parameters that can have a significant …

Design, Fabrication And Characterization Of Infrared Filters, Samiul Amin

Theses

In-situ temperature monitoring, mapping, and control have become significant in semiconductor processes. Temperature of these processes can be measured by making use of the thermal emission from substrates in the infrared region. Various methods have been proposed to provide multicolor infrared detection. One such method involves placing segmented infrared filters close to the focal plane. The present study aims at gaining an insight into the design, fabrication and characterization of infrared filters. Filters were designed and fabricated with peak transmission at 1.5, 3.0, and 4.5 m. Extensive spectroscopic studies, using FTIR spectroscopy, have been performed in the infrared region, on …

A Parallel Processing Architecture For Dqdb Protocol Implementation, Nilesh Vinubhai Gandhi

Theses

The high bandwidth transmission links, which have been provided by the advances of Fiber Optics Technology, reduce drastically the packet transmission times and place new demands on the nodal protocol processing. Segmentation and reassembly of packets, computation of checksums, introduction of source and destination addresses, etc., must be performed extremely fast in order to prevent node processing from becoming the bottleneck of the transmission. Parallel processing enables the execution of the previous tasks on multiple packets simultaneously and therefore has the potential of addressing the issue of fast node processing successfully. In this thesis we focus on the Medium Access …

Modeling Of Rapid Thermal Processing System By Finite Element Method, Helen Martynov

Theses

A finite element model for the Rapid Thermal Processing (RTP) system at NJIT was developed based on the software package MSC/NASTRAN. Based on this model, a thermal analysis of the 9" chamber, 3 zones (37 lamps) RTP system was conducted for various modes of system operation with the 6" silicon wafer temperature varying from 300°K to 1100°K. An open-loop control algorithm was developed in order to study the dependence of wafer temperature on time, position, and applied radiant heat distribution. It was shown that the non-uniformity in the radial temperature profile can be less than 3°C during wafer heating at …

Investigation Of The Pl Cebus Performance With And Without Acknowledgment, Menghan Pan

Theses

The power line implementation of the consumer electronic bus (PL CEBUS) is a promising and inexpensive approach for home automation. Since the intro¬duction of the PL CEBUS standards, there has been increasing efforts on evaluating its performance. However, all the works have been performed for unacknowledged networks. This thesis presents the first successful evaluation of the PL CEBUS with acknowledment. Three different cases, namely, 600, 300 and 100 bits packet sizes, have been considered. The evaluation included the simulation of performance parameters such as message and packet delays, message throughput, and channel throughput. Acknowledged network performance has been confirmed to …

Radiation From A Tapered Dielectric Rod Antenna, Anil Prabhakar

Theses

The radiation fields from a cylindrical dielectric taper is studied. The numerical results of a theoretical model for a taper excited by the dominant HEn mode is compared with experimental measurements. A theoretical mode] for the next propa¬gating mode in the structure. the TE01 mode. is investigated and numerical results based on this proposed model are generated. The theoretical models are based upon the combination of the exact modal field solutions for a step profile cylindrical dielectric rod waveguide. local mode Hum-T. and the equivalence principle for the determination of equivalent current densities.

The far-zone radiation field is considered to …

Rigorous Te Solution To The Staircase Model Of The Dielectric Wedge Antenna, Wan-Yu Chen

Theses

The rigorous TE solution to the staircase model of the dielectric wedge antenna is presented. The fundamental, even TE surface wave mode of the dielectric slab waveguide is taken to excite a dielectric wedge which is formed by symmetrically tapering the slab. The method of solution is based on Marcuse's step-transition method. Radiation patterns of power gain are presented which show increased maximum power gains and narrower main lobe beamwidths for longer wedges. For higher dielectric constant material, the main lobe beamwidth is increased. In all cases examined, negligible sidelobes were obtained.