Digital Commons Network^™

Development Of A Critical Path Method Specification And A Training Program For Use Of Cpm And Ktc, James D. Stevens, Donn E. Hancher, Ihab M. Hamdi

Kentucky Transportation Center Research Report

The Critical Path Method is a proven management technique used for determining the critical activities that would need additional care in any type of construction projects. The KTC requires that CPM schedules be used on selected highway projects. This research project offers a detailed idea on CPM scheduling application in highway construction projects, as well as current practices in other departments of transportation nationwide, together with specifications for proper application of CPM scheduling.

Acuta Enews June 1996, Vol. 25, No. 6

ACUTA Newsletters

In This Issue

From the President

Virtual LAN at Univ. of Mississippi

DC at a Glance

Internet Phone

From ACUTA Headquarters

Design Of Gradient Index Optical Thin Films, Jeffrey J. Druessel

Theses and Dissertations

Gradient index thin films provide greater flexibility for the design of optical coatings than the more conventional 'layer' films. In addition, gradient index films have higher damage thresholds and better adhesion properties. This dissertation presents an enhancement to the existing inverse Fourier transform gradient index design method, and develops a new optimal design method for gradient index films using a generalized Fourier series approach. The inverse Fourier transform method is modified to include use of the phase of the index profile as a variable in rugate filter design. Use of an optimal phase function in Fourier-based filter designs reduces the …

An Investigation Of The Characteristics Of Regenerative Heat Exchangers, Timothy J. Murphy

Theses and Dissertations

The objective of the current research was to investigate the effects of reducing screen thickness on the volume and compactness factor of stacked, wire-screen regenerators. An improved transient step-change method was devised which integrated experimental data with a numerical model of the flow to determine the heat transfer coefficient and friction factor. The improvements to the approach are: (1) the measured inlet temperature trace is used, (2) the heat transfer coefficient is based on a parameter called the sponge effect delay time, and (3) the important effect of the tube surrounding the matrix is included in the numerical model. The …

Software For Optimizing Groundwater Or Conjunctive Water Management, Richard C. Peralta, Alaa H. Aly

Civil and Environmental Engineering Faculty Publications

US/REMAX is a computer program designed to assist water managers in developing optimal groundwater and/or surface water strategies for a wide range of management problems. It employs response matrix, regression and other methods adapted for nonlinear systems. US/REMAX performs deterministic or reliability-based, single- or multi-objective optimization. Decision variables are ground-water extraction/injection and/or surface water diversion. State variables include water flows, stages and concentrations. Hard coded objective functions and constraints are linear, nonlinear, integer or mixed integer. Special constraints can be added to address unusual situations.

Experimental And Numerical Investigation Of Abrasive Waterjet Polishing Technology, Fenggang Li

Dissertations

The objective of this investigation is the development of the abrasive waterjet (AWJ) based polishing technology. The result of the investigation will assist the implementation of AWJ polishing for manufacturing processes and procedures.

Experimental exploration of AWl polishing involving processing of difficultmachine materials such as Alumina ceramic and stainless steel. Surface improvement due to this processing is evaluated by measuring the roughness of the generated surfaces and examining the microhardness and micro-topography of the surfaces using Scanning Electronic Microscopy (SEM). The surface roughness of 0.3 micron was obtained at samples of ceramic and metal alloys at a reasonable rate using …

Explicit Congestion Control Algorithms For Available Bit Rate Services In Asynchronous Transfer Mode Networks, Ambalavanar Arulambalam

Dissertations

Congestion control of available bit rate (ABR) services in asynchronous transfer mode (ATM) networks has been the recent focus of the ATM Forum. The focus of this dissertation is to study the impact of queueing disciplines on ABR service congestion control, and to develop an explicit rate control algorithm.

Two queueing disciplines, namely, First-In-First-Out (FIFO) and per-VC (virtual connection) queueing, are examined. Performance in terms of fairness, throughput, cell loss rate, buffer size and network utilization are benchmarked via extensive simulations. Implementation complexity analysis and trade-offs associated with each queueing implementation are addressed. Contrary to the common belief, our investigation …

Development Of A Traffic Safety Index For Urban Intersections, Jae-Hong Kang

Dissertations

Conventional safety analysis focuses on the accident environment at specific locations or a limited segment of highways or arterials, and attempts to identify the effects of accident contributing factors. The development of a safety index in the past was based on a statistical summary for county or statewide areas, using general indicators such as population, number of registered vehicles, vehicle miles traveled and so on. This research effort presents a state-of-the-art procedural analytical approach for the safety analysis of Manhattan intersections that are exposed to a unique urban environment. The computed index provides safety ratings that can identify potential safety …

A Full Wave Method For Rough Surface Scattering Using Fictitious Current Distributions, Anthony A. Triolo

Dissertations

Rough surface scattering is a current topic of interest in many diverse fields. But, despite its importance, the two most widely used solution methods, the Kirchhoff and first order perturbation methods, are valid only for a restricted range of surface types. There is a large range of surface statistics for which neither of these theories is valid. There are purely numerical solutions to the problem, i.e., the integral equation technique and FDTD method, but these methods require a prohibitively large amount of computer time and storage space for use in practical applications. A full wave method has been introduced by …

Discrete Element Modeling Of Dry Granular Material Using A Massively Parallel Supercomputer, David W. Washington

Dissertations

It is the state-of -the-art within Geotechnical Engineering to model soils as systems of particles rather than using the traditional continuum approach. Simulating these systems of particles for geotechnical boundary value problems results in systems which are of necessity large, motivating the application of massively parallel supercomputers. This thesis pursues such an approach.

The following work describes numerical experiments using a Discrete Element Method (DEM) paradigm for soils (Trubal) together with massively parallel computers with Single Instruction Multiple Data (SIMD) architecture. The discrete element method describes the behavior of granular assemblies using the classical mechanics of discrete bodies. The computational …

Advanced Characterization And Leaching Behavior Of Hexavalent And Trivalent Chromium From Waste Material, Erik Moerman

Theses

In this thesis we employed advanced characterization techniques such as XRF, XRD, XPS, SEM, and EDS to provide detailed information about the chromium waste _ specifically chromium valence states (Cr(VI) and Cr(III)), and their chemical association with other phases in the waste matrix.

The removal of Cr(VI) was accomplished by leaching with aqueous solutions containing inorganic anions such as Cl^-, SO₄^2-, PO₄^3- and others. Cr(VI) can be released from the waste by a combination of desorption and ion exchange processes. The efficiency and kinetics of displacing CrO₄^2- from the waste by …

Removal Of Vocs From Waste Gas Streams By Cyclic Membrane Separation Techniques, Gordana Obuskovic

Theses

In this study, new separation techniques called Flow Swing Membrane Absorption Permeation (FSMABP) and Flow Swing Membrane Permeation (FSMP) were used for the removal of the volatile organic compounds (VOCs). In both cases, processes are cyclic in terms of feed flow while desorption of the VOCs is constantly taking place. The transport mechanism in the FSMABP process is selective permeation followed by absorption of the VOCs into the stagnant nonvolatile absorbent liquid on the shell side of the membrane module and then desorption through a similar polymeric membrane. In the FSMP process, VOCs selectively permeate through the membrane into the …

Acuta Enews May 1996, Vol. 25, No. 5

ACUTA Newsletters

In This Issue

From the President

DC at a Glance

Letter to FCC

High-Tech Crime

From ACUTA Headquarters

Storage And Delivery Constrained Unit Commitment, Y. Al-Kalaani, F. Eugenio Villaseca, F Renovich Jr

Electrical and Computer Engineering Faculty Publications

A general formulation and the development of a dynamic programming algorithm to solve a fuel-constrained unit commitment problem is presented. The system under consideration has oil units with storage constraints, gas units with delivery constraints, and unconstrained coal units. An optimal approach to transfer the fuel delivery constraints into unit capacity limits using a closed-form dual dispatch is introduced. As a result, the gas units can be viewed as fuel-unconstrained, thus greatly reducing complexity. It is shown that the optimization problem, which requires that storage levels be parameterized, leads to two different dispatch rules. The oil units are dispatched to …

Toward A Balanced Strategy To Address Contaminated Groundwater Plumes At The Massachusetts Military Reservation, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

This document contains the findings and recommendations of the Technical Review and Evaluation Team (TRET) for the plume containment project at the Massachusetts Military Reservation (MMR). The findings and recommendations are in response to the 60 Percent Plume Containment Design, submitted by Operational Technologies (OpTech) in January 1996. In short, the TRET recommends the MMR depart substantially from the strategy of simultaneous, 100 percent containment and treatment that was assigned to OpTech for design in accordance with the Record of Decision (ROD) for Interim Action. This strategy guided the course of the plume containment project over the past two years

Bs News

Building Services Engineering

No abstract provided.

Measurements Of The Complex Dielectric Constant Of Volcanic Ash From 4 To 19 Ghz, R. J. Adams, Warren F. Perger, William I. Rose, A. Kostinski

Department of Geological and Mining Engineering and Sciences Publications

Dielectric data in volcanic ash at weather radar wavelengths (centimeter range) are extremely sparse and are crucial for radar sensing of ash clouds and for imaging of volcanic terrains. This study extends previous data to include a wavelength range of 1.5–7.5 cm and volcanic ash compositions of 50–75% silica. The real part of the complex permittivity, ε′, of volcanic ash is 6 ± 0.5 (1σ) for all wavelengths. The imaginary part, ε″, ranges from 0.08 to 0.27. Both ε′ and ε″ show higher values at lower SiO2 concentration. It is safe to assume in any weather radar applications that the …

Coupling And Attenuation Of Waves In Plates By Randomly Distributed Attached Impedances, Joseph A. Turner, Richard L. Weaver

Department of Engineering Mechanics: Faculty Publications

The average response of an infinite thin plate with statistically homogeneous attached random impedances is examined. The added impedances, which represent typical heterogeneities that might occur on complex shells, provide light coupling between the extensional, shear, and flexural waves. The mean plate response is formulated in terms of the Dyson equation which is solved within the assumptions of the first-order smoothing approximation, or Keller approximation, valid when the heterogeneities are weak. Scattering attenuations are derived for each propagation mode. It is shown that the attenuation of one wave type due to coupling to another is proportional to the modal density …

Determination Of Iron Colloid Size Distribution In The Presence Of Suspended Cells: Application To Iron Deposition Onto A Biofilm Surface, Waihung Lo, Yarrow M. Nelson, Leonard W. Lion, Michael L. Shuler, William C. Ghiorse

Civil and Environmental Engineering

Transport and deposition of colloidal Fe, Mn and Al oxides play key roles in the cycling of toxic transition metals in aquatic environments because these colloids strongly bind transition metals. Further, attachment of biological cells and biofilm growth on surfaces can indirectly affect toxic metal distribution by influencing the deposition of colloidal oxides to surfaces. To elucidate the mechanisms governing these processes, deposition of colloidal oxides onto surfaces must be evaluated in the presence of suspended and adherent bacterial cells. Both particle size and concentration are expected to influence deposition. An experimental protocol was developed to determine the size distribution …

Santa Clara Magazine, Volume 38 Number 2, Spring 1996, Santa Clara University

Santa Clara Magazine

10 - IT CHANGED MY LIFE Reflecting on 30 years of the Santa Clara Communiry Action Program, former SCCAP directors recount what participating in the organization meant to them.

14 - ATTICUS An excerpt from the recent novel by SCU's new Gerard Manley Hopkins, S.)., Professor in Arts and Humanities. By Ron Hansen M.A. '95

22 - LOST IN CYBERSPACE Universities debate Internet addiction among students: Should we stop them before rhey surf again? By Jeff Brazil '85

28 - THE GRAPES OF WRATH: PART II Professor of Modern Languages Francisco Jimenez '66 remembers his childhood as a migrant laborer, …

Acuta Enews April 1996, Vol. 25, No. 4

ACUTA Newsletters

In This Issue

From the President

Pasadena Community College

Port by Every Pillow at WCU

Multi-Media at Sewanee

DC at a Glance

From ACUTA Headquarters

Non-Markovian Brownian Motion In A Viscoelastic Fluid, V. S. Volkov, Arkadii I. Leonov

College of Polymer Science and Polymer Engineering

A theory of non-Markovian translational Brownian motion in a Maxwell fluid is developed. A universal kinetic equation for the joint probability distribution of position, velocity, and acceleration of a Brownian particle is derived directly from the extended dynamic equations for the system. Unlike the extended Fokker-Planck equation which corresponds to Mori-Kubo generalized Langevin equation and provides only with calculations of one-time moments, the universal kinetic equation obtained gives complete statistical description of the process. In particular, an exact generalized Fokker-Planck equation in the velocity space valid for any time instant is derived for the free non-Markovian Brownian motion. It shows …

A Proposed Method Of Calibration And Correlation Of Weigh-In-Motion Systems, David L. Allen, Jerry G. Pigman

Kentucky Transportation Center Research Report

There are various types of weigh-in-motion systems currently in use by agencies that collect weight data. These include load cells, bending plate, capacitance pads, piezoelectric cables, and bridge WIM's. The response and behavior of these systems differs from one type to another. Most states calibrate these systems by one of two methods. The first is to calibrate by running a truck or trucks of known weights across the scales a number of times. The second is to use a sample of trucks from the traffic stream.

This report details a field calibration and correlation test site between a slow-speed WIM …

Analysis Of Homogeneous Combustion In Monolithic Structures, Hendrik J. Viljoen

Papers in Chemical Reactions

An analytical method is used to solve the problem of homogeneous combustion in a monolith. The solid phase acts as burner support. Heat is conducted much more effectively in the solid phase and preheating of the gas is more effective. The flame temperature exceeds the adiabatic value. Solutions are presented for different velocities and feed concentrations.

Bs News

Building Services Engineering

No abstract provided.

Ua3/8/5 Application For Cause Award For Excellence In Campus Networking, Wku President's Office-Meredith

WKU Administration Documents

Application for CAUSE award for excellence in campus networking gives details about the first WKU computer network.

Method And Apparatus For Destroying Organic Compounds In Fluid, Yin Zhang, John C. Crittenden, David W. Hand, David L. Perram

Michigan Tech Patents

An apparatus for the photocatalytic oxidation of organic contaminants in fluid includes a reactor and a photocatalyst affixed to support material. Preferably, the outer wall of the reactor is constructed of material transmissive of ultraviolet radiation. The support material preferably is transmissive of ultraviolet radiation. The support material can also be an adsorbent material. Also, a method for photocatalytic oxidation of organic contaminants in fluid. Also, a method for preparation of a supported photocatalyst. Also, a supported photocatalyst adapted for the photocatalytic oxidation of organic contaminants in fluid. Also, a method for preparing a photocatalyst adapted for the photocatalytic oxidation …

Acuta Enews March 1996, Vol. 25, No. 3

ACUTA Newsletters

In This Issue

From the President

Seeking a Wireless Solution

DC at a Glance

Telecom & Leg/Reg Listserves

From ACUTA Headquarters

A Response Surface Methodology Approach To Groundwater Model Calibration, Jeffrey B. Rowland

Theses and Dissertations

This thesis examined the effect of parameter bounding, a reduced data set, and data enrichment techniques on a response surface methodology (RSM) approach to groundwater model calibration. The four phases of the study included a calibration using a very dense data matrix, a calibration using a sparse calibration matrix, an evaluation of several data enrichment techniques, and a calibration using a data matrix enlarged with the use of the best enrichment technique. All calibrations were conducted using only a first order approximation to the response surface and with bounds placed on the input parameters. The first two calibrations using the …

Performance Study Of Shared Versus Nonshared Bandwidth On A Packet-Switched Network, John P. Stevens

Theses and Dissertations

In wide area computer data communications, many networks have evolved by satisfying increased user demands in the most expedient manner. In some cases, new users’ demands are satisfied by installing a new link, rather than sharing the links that are already in place. This research investigates the differences in performance between using a dedicated link for each source destination pair (nonshared bandwidth) and using a single link to be used by all source destination pairs (shared bandwidth). Simulation models are developed for a wide area network using shared bandwidth, and a wide area network using nonshared bandwidth. The quality of …