Digital Commons Network^™

Leveraging Artificial Intelligence In Education To Drive Cross-Sector Innovation, Brent Terwilliger, John Faraca

Publications

As artificial intelligence (AI) reshapes educational practices, particularly in technical fields such as uncrewed systems, robotics, and aviation/ aerospace, its integration raises promise and complexity. This exploratory study features an investigation of the impact AI tools adoption has on instruction, curriculum support, and workforce preparation, with a focus on online learning environments. Drawing from pilot survey data across aviation and aerospace education stakeholders and hands-on evaluation of AI video production platforms, findings reveal diverse applications, perceived benefits, and critical concerns, including ethical, pedagogical, and institutional challenges. Additionally, the analysis explored how AI-enabled education intersects with broader industry and government innovation …

Microstructural Characterization Of Sheet Lamination-Based Additively Manufactured Fiber-Reinforced Thermoplastic Composites, Samiul Alam, Devin Young, Dae Han Sung, Juhyeong Lee

Mechanical and Aerospace Engineering Student Publications and Presentations

Additive manufacturing (AM) of fiber-reinforced composites has garnered significant interest for its versatility in creating intricate parts and rapid prototyping. Short fiber-reinforced composites are typically fabricated through fused deposition modeling (FDM), but they possess several challenges including limited fiber volume fraction, low printing speed, and low throughput for industry scales. Composite-based additive manufacturing (CBAM) is a novel sheet laminationbased AM process, combining non-woven fabric reinforcement with thermoplastic materials to fabricate three-dimensional objects. CBAM offers notable advantages over FDM, including the potential for achieving higher fiber volume fractions and faster production rates, making it a promising technology for further investigation in …

Reliability Of Cazro3 And Mgo Capacitors At High Temperatures, Alan Devoe, Hung Trinh, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Calcium zirconate and magnesium oxide have both been found to have useful dielectric properties at high temperatures. Multilayer ceramic capacitors (MLCCs) were made with these dielectrics and platinum electrodes. The relationship between the lifespan (mean-time to failure) and applied voltage was determined using Weibull statistics. CaZrO₃ capacitors were tested between 550◦C and600◦C while MgO capacitors were tested between 600◦C and 650◦C. The temperature coefficient Ea and the voltage coefficient n of the Prokopowicz Vaskas equation were determined under various test conditions. Activation energiesforcalciumzirconateandmagnesiumoxidewere3.25eVand3.48eV, respectively. Resistance degradation of CaZrO₃ and MgO capacitors, tested at 600◦Cand250V, were compared.

Removal Of Diisopropylamine From Water Using Ultraviolet- And Thermal-Activated Persulfate Degradation, Eric Soliz

Masters Theses (Archived)

UV light-activated persulfate degradation of diisopropylamine (DIPA) was explored as a means for improving water quality in product water derived from oil and natural gas produced water. A set of temperature swing solvent extraction (TSSE) tests was conducted to investigate the effect of varying ratios of DIPA to feed ratios on water recovery and conductivity and also to reinforce available data suggesting that TSSE may remove saline ions from synthetic produced water enough to improve water quality sufficient enough at sufficient quantities enough for reuse. TSSE may result in residual DIPA remaining in the product water. A three-part test to …

Evaluation Of Schoenoplectus Californicus In An Artificial System For E. Coli Removal, Kimia Ahmadiyehyazdi

Masters Theses (Archived)

Green technologies and nature-based solutions like constructed wetlands have be come more popular due to their environmentally friendly approach to remediation, low cost of construction, and maintenance. Also, they have shown efficiency in removing a wide range of contaminants. However, choosing a suitable aquatic plant for this system is one of the questions that should be answered wisely. Schoenoplectus californicus– Giant Bulrush is an aquatic plant that was tested in this controlled constructed wetland, and the final concentration of the targeted microbial contamination, which is E. coli, was reduced remarkably. Also, for this study, soil was removed from the …

A Highly Sensitive Electrochemical Immunosensor For Cortisol Detection, Pritu Sarkar, Ali Ashraf, Ahmed Hasnain Jalal, Fahmida Alam, Nazmul Islam

Mechanical Engineering Faculty Publications

In this research, an interdigitated gear-shaped working electrode is presented for cortisol sensing. Overall, the sensor was designed in a three-electrode system and was fabricated using direct laser scribing. A synthesized conductive ink based on graphene and polyaniline was further employed to enhance the electrochemical performance of the sensor. Scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy were employed for physicochemical characterization of the laser-induced graphene (LIG) sensor. Cortisol, a biomarker essential in detecting stress, was detected both in phosphate-buffered saline (PBS, pH = 7.4) and human serum within a linear range of 100 ng/mL to 100 µg/mL. …

Zn–Assisted Synthesis Of M (Mn/Fe/Co/Ni)-N-C Catalysts For Multifunctional Electrochemical Activity, Kemila A. Chaudhary

Electronic Theses & Dissertations

The design and development of atomically dispersed M-N-C catalysts (metal (M) supported on an nitrogen-carbon (NC) matrix with high multifunctional electrocatalytic performance is desirable but proved to be very challenging. Herein, we synthesized M-N-C catalysts (M = Fe, Co, Mn, and Ni) using Zn-assisted high temperature treatment and characterized using various techniques. The prepared catalysts were tested for their electrocatalytic performance towards oxygen and hydrogen evolution reaction (OER and HER) as well as oxygen reduction reaction (ORR) in alkaline media. The results indicated that Mn-N-C catalyst showed higher performance towards both the ORR (E_1/2 = 0.90 V) and …

Aerial Robotic Studies Of Volcanic Co2 Emissions, John Ericksen

Computer Science ETDs

Volcanic systems are inherently complex, involving dynamic interactions among magma flow, gas emissions, and atmospheric dispersion. This dissertation focuses on developing and analyzing autonomous UAS algorithms for efficiently surveying volcanic CO2 plumes, introducing several novel methods: the LoCUS algorithm, a swarm coordination and self-healing algorithm that supports gradient-based plume tracking, a transect-based technique that employs a 2D Gaussian fit to calculate CO2 plume flux, and the Sketch algorithm for rapid plume boundary tracing. By treating multiple UAS as a single scientific instrument, these methods leverage swarm algorithms to use in-situ data in ways impossible with individual drones. Validated through simulations …

An Approach To Expanding The Industrial Training And Assessment Center To The Residential Sector, Cailee Addison Bush

Theses and Dissertations

The Industrial Training and Assessment Center (ITAC) conducts no-cost energy audits for small and medium sized industrial and commercial buildings across the United States, with a goal to train students in energy optimization and cost reduction, while helping companies to reduce inefficiencies and waste. Expanding this program to the residential sector can reduce energy usage across the United States, largely due to this sector contributing to 15% of America’s energy usage. This research examines the development of a procedure to transition the ITAC into including the residential sector. To ensure a seamless introduction of this sector, the procedure must contain …

Removal Of Harmful Algal Bloom Toxin, Microcystin-Lr Via Graphene Coated Polymers, Justin Douglas Puhnaty

Theses and Dissertations

This study investigates a novel 3D-printed graphene-coated polymer (GCP) for the removal of Microcystin-LR (MC-LR), a harmful cyanotoxin produced during harmful algal blooms (HABs). While graphene nanoplatelets (GnPs) exhibit high adsorption capacity, their powdered form limits practical application. To address this, GnPs were coated onto 3D-printed poly(lactic acid) (PLA) substrates, enabling enhanced handling for field deployment. Surface characterization using laser confocal microscopy, Raman spectroscopy, and thermogravimetric analysis confirmed GnP distribution and coating uniformity. Batch adsorption experiments revealed pseudo-second-order kinetics, a maximum adsorption capacity (qmax) of 596 μg/g, and adsorption behavior best described by the Langmuir isotherm. Statistical analysis and comparison …

Frontlines Of Influence: State Vs. Nonstate Disinformation Campaigns, Lily Wershbale

Cybersecurity Undergraduate Research Showcase

This paper examines the evolution of disinformation campaigns conducted by state and nonstate actors, focusing specifically on Russia and the Islamic State as representative case studies. Through historical examples and qualitative comparative analysis, this research identifies the similarities and differences in disinformation’s role in actors’ core missions, resource allocation, and targeting decisions. This paper further explores the implications of artificial intelligence on disinformation campaigns, investigating how emerging technology will impact the influence operations of state governments and nonstate organizations alike. The findings reveal that while the ultimate intent of both state and non-state actors is to destabilize societies, their approaches …

Terraincraft: Automated Land-Cover–Driven Terrain Generation For Marine Robot Simulations, Xinyue Liang

Dartmouth College Master’s Theses

From self-driving cars navigating city streets to all-terrain vehicles tackling rugged landscapes, recent leaps in robotic autonomy due to fast pace development in deep learning are reshaping how machines interact with the real world. However, autonomy in the aquatic environment is still limited, due to difficulty in testing and unavailability of realistic simulation environments.

In this project, we aim to create an automated system that simplifies the processes of creating synthetic datasets for marine robots navigation training tasks. We achieved this through a land cover map controlled terrain generation. Our goal is to provide an automatic terrain generation system that …

Efficient Wattle Design For High-Level Nuclear Waste Tanks, Jasmine B. Clarke

UNLV Theses, Dissertations, Professional Papers, and Capstones

At the Hanford Site in Washington state and the Savannah River Site in South Carolina, there are underground steel tanks that hold high-level nuclear waste (HLW) and nearly 450 million curies of radioactivity. At these sites, some leaks have been detected in HLW tanks. While detecting these leaks allows for identification of the issue, it does not solve the problem or prevent the leakage of HLW contaminants into collection pans and secondary containment. Repairing these leaks poses potential threats to workers for exposure risk. To address this issue, the present research seeks to create and utilize an active barrier in …

Developments On Abbreviations Towards Machine Reading Comprehension, Sing Choi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Machine reading comprehension is a critical step in development of applications that require the semantic understanding of human speech-to-text driven work. Many devices such as smart home appliances like the Amazon Echo Dot, Google Home, or smart assistants like Apple Siri or Microsoft Cortana are examples of these applications. The comprehension task involves a deeper understanding and recognition of named entities such as person names, locations, medicals codes, quantities, abbreviations, and acronyms in speech or text data. In this dissertation, we explore and extend the different approaches and techniques in modern research that tackles the problem of recognition and definition …

Reconfiguration-Driven Assembly Of Inorganic Nanomembranes, Divya Jyoti Prakash

Chemical and Biological Engineering ETDs

This thesis focuses on the guided self-assembly of metastable nanomembranes (NMs) that are either amorphous or polycrystalline. Guided self-assembly of NMs is a robust and scalable method to obtain a variety of three-dimensional structures such as helices, rolled-up tubes, and networks of interconnected channels. These 3D structures have important applications as on-chip actuators, sensors, inductors, transformers, waveguides, and antennas. Furthermore, a large amount of strain and strain gradient can be imparted in NMs by bending them to a nanoscale and microscale radius of curvature, making guided self-assembly on NMs a viable route to extreme strain engineering of amorphous and polycrystalline …

In-Hand Singulation, Scooping, And Cable Untangling With A 5-Dof Tactile-Reactive Gripper, Yuhao Zhou, Pokuang Zhou, Shaoxiong Wang, Yu She

School of Industrial Engineering Faculty Publications

Manipulation tasks often require a high degree of dexterity, typically necessitating grippers with multiple degrees of freedom (DOF). While a robotic hand equipped with multiple fingers can execute precise and intricate manipulation tasks, the inherent redundancy stemming from its high-DOF often adds complexity that may not be required. In this paper, we introduce the design of a tactile sensor-equipped gripper with two fingers and five-DOF. We present a novel design integrating a GelSight tactile sensor, enhancing sensing capabilities and enabling finer control during specific manipulation tasks. To evaluate the gripper's performance, we conduct experiments involving three challenging tasks: 1) retrieving, …

Development And Application Of Low-Cost Carbon Dioxide Sensors In An Urban Environment, David Coghiel

Theses - ALL

Advancements in sensor technology have made air quality monitoring platforms more user-friendly, compact, and affordable. This provides new opportunities to monitor areas of interest in environments previously not investigated. The existing elevated I-81 Viaduct that runs through downtown Syracuse, NY is being demolished to be reconstructed as a ground level community grid. The goal of the study was to develop a network of low-cost air quality sensor units to monitor concentrations of carbon dioxide along the viaduct prior to its reconstruction. Multiple low-cost carbon dioxide sensors were purchased and tested under laboratory and field conditions to determine applicability for continuous …

Managing Happiness In The Mexican Maquiladora Industry: A Turnover Management Challenge, Claudia M. Burgos Cruz, Reyna Virginia Barragan Quintero, Angel Contreras Cruz

Engineering and Technology Management Faculty Publications and Presentations

This study explores a turnover management case by implementing exploratory Human-Centered Design (HCD) strategies, combining a collaborative tool in a Mexican maquiladora in Tecate, Baja California. To reduce turnover, the tool was designed, prototyped, and tested to foster the emotional well-being of employees, enhance employee engagement, and promote a sense of belonging in the workplace. The company leaders and managers were trained to use the HCD prototypes, such as the Happiness Dashboard, a visual feedback system using emojis to collect data during regular shifts, and the Gemba Walks, a method for collecting information through observing and interacting with workers. Organizational …

Multi-Modal Mri For The Pre-Clinical Evaluation Of Hiv-Linked Changes In The Central Nervous System, Gabriel Gauthier

Theses & Dissertations

Though the inception of anti-retroviral therapy (ART) has fundamentally changed the life expectancy of human immunodeficiency virus (HIV) patients, accessibility and outcomes vary enormously along demographic lines. Even for people living with HIV (PLWH) with perfect access and adherence to anti-retroviral drugs (ARVs), modern treatment plans are fundamentally unable to secure complete viral remission for patients. The cause of this perpetual infection is the persistence of viral reservoirs in the central nervous system (CNS), hidden beyond the reach of modern ARVs, leaving patients to deal with lifelong medication side-effects and risks of developing HIV-associated neurodegenerative disorders (HAND). Despite improving outcomes …

From Concept To Light: Manufacturing A Dual-Purpose Bedside Lamp And Book Organizer, Nicole Goulet

Honors Theses

This report features the design, development, engineering changes, and manufacturing of the Bedside Lamp, a hand-made multi-purpose lamp, book holder, and charging hub. The investigation began with research and a market analysis on current lamp designs and a discussion about what features would set the lamp apart. This led to the design of the lamp and construction of multiple prototypes for proof of concept.

A manufacturing process was then designed to demonstrate the steps to start up an efficient and cost-effective production line. This process included obtaining raw materials, cutting them into the necessary parts, and assembling everything to create …

A Product Development Process From Concept To Production: Smartphone Projector, Ross G. Cohen, Piper G. Thomas

Honors Theses

The purpose of this thesis is to demonstrate the production and documentation of the SmartPhone Projector Capstone for the Center of Manufacturing Excellence (CME). This document follows the production development from the beginning Spring 2024 problem definition all the way to the Fall of 2024 final product. This project was completed by a team of five undergraduate students, including an accounting major, finance major, biomedical engineering major, and two mechanical engineering majors. The goal of this project was to design and build a SmartPhone projector, then carry out a full production run located on the CME shop floor. To begin …

The Effects Of Flood Irrigation Vs. Pivot Irrigation On Groundwater Recharge, Tea Rainey

Graduate Theses & Non-Theses

Groundwater can be an important resource for river flow support, and this is especially true with the Big Hole River in southwestern Montana which is mainly fed by groundwater late in the summer season. Maintaining the source of groundwater is an important focus both for the Big Hole River Watershed Committee as well as local ranchers. Agriculture uses large quantities of water, and as technology advances many ranchers are turning to the use of pivot lines for irrigation. Historically, flood irrigation was used when surface water was available. Surface water sources include tributary streams as well as diversions from the …

Peroxi-Electrocoagulation For Pfas Mitigation: The Impact Of Water Quality And Dissolved Organic Matter On Removal Pathways, Donald R. Ryan, Claire K. Baldus, Shimaa M. Kteeba, Melvin Samuel, Yin Wang, Laodong Wang, Brooke K. Mayer, Patrick J. Mcnamara

Civil and Environmental Engineering Faculty Research and Publications

The recent addition of per- and polyfluoroalkyl substances (PFAS) to the National Primary Drinking Water Regulation per- has increased the need for research on PFAS treatment technologies for water and wastewater. Electrochemical treatment processes have been widely investigated for PFAS removal. Peroxi-electrocoagulation (electrocoagulation paired with hydrogen peroxide (EC:H₂O₂)) was evaluated as a novel water treatment process for PFAS mitigation due to the multimechanistic removal pathways that can proceed during treatment, including chemical degradation via oxidation, and physical separation pathways such as sorption to flocs, flotation layer accumulation, and foam fractionation. This work investigated the impacts of …

Facilitating Design Of Effective, Scalable Digital Mental Health Care, Himanshu Mahesh Patil

Dartmouth College Master’s Theses

This thesis tackles the challenges of designing effective, scalable digital mental health care solutions by integrating psychological research with human-computer interaction (HCI) principles. An exploration of self-care technologies (SCTs) for mental health is conducted to highlight challenges to comparative analysis, like fragmented research outcomes. Two research questions are posed to investigate how mental health interventions can be designed to be effective and overcome practical challenges to implementation. A theoretical framework in clinical psychology is adapted to bridge the gap between psychology and HCI. A methodology for conducting standardized, structured comparative analysis of mental health interventions is identified. The identified method …

Praxly: An Online Ide For The Praxis Cs Test Pseudocode, Benjamin Saupp

James Madison Undergraduate Research Journal (JMURJ)

No abstract provided.

How Extreme Rainfall And Failing Dams Unleashed The Derna Flood Disaster, Ayman Mokhtar Nemnem, Ahad Hasan Tanim, Audrika Nahian, Sadik Khan, Erfan Goharian, Jasim Imran

Faculty Publications

On September 11, 2023, Storm Daniel unleashed unprecedented rainfall over the Wadi Derna watershed, triggering one of the most devastating floods in modern history, striking Derna, a coastal city in Libya. This study reconstructs the disaster using an integrated modeling approach that combines satellite imagery, hydrologic, hydraulic, and geotechnical simulations, machine learning, eyewitness accounts, and digital elevation data to assess the impact of cascading dam failures. Our findings reveal that the region’s dams, even if structurally sound, would have provided minimal protection against the extreme runoff. However, their failure unleashed a destructive surge wave, amplifying the disaster’s magnitude and devastation. …

Gradient Fibro-Porous Materials For Tailored Sound Absorption, William Johnston, Janith Godakawela, Bhisham Sharma

Michigan Tech Publications

Reducing the pore size of bulk sound absorbers often increases weight and introduces manufacturing challenges, limiting their practical use. To address these issues, a class of materials is introduced that uses 3D printing to seamlessly integrate fibers within porous scaffolds, allowing improved sound absorption performance without a significant weight addition. The reliance on 3D printing enables the creation of gradient fibro-porous structures with customizable acoustic properties. This study explores the effect of through-thickness gradients in the scaffold’s relative density, fiber thickness, and fiber density on the acoustical performance with the goal of identifying the optimal strategy to obtain broader and …

How Extreme Rainfall And Failing Dams Unleashed The Derna Flood Disaster, Ayman Mokhtar Nemnem, Ahad Hasan Tanim, Audrika Nahian, Sadik Khan, Erfan Goharian, Jasim Imran

Faculty Publications

On September 11, 2023, Storm Daniel unleashed unprecedented rainfall over the Wadi Derna watershed, triggering one of the most devastating floods in modern history, striking Derna, a coastal city in Libya. This study reconstructs the disaster using an integrated modeling approach that combines satellite imagery, hydrologic, hydraulic, and geotechnical simulations, machine learning, eyewitness accounts, and digital elevation data to assess the impact of cascading dam failures. Our findings reveal that the region’s dams, even if structurally sound, would have provided minimal protection against the extreme runoff. However, their failure unleashed a destructive surge wave, amplifying the disaster’s magnitude and devastation. …

A Proposed Metals Recovery Assessment Protocol To Evaluate Mine Waste For Critical Minerals And Rare Earth Recovery Prior To Site Remediation, Claire Mbia

Graduate Theses & Non-Theses

The Metals Recovery Assessment (MRA) protocol involves collecting and evaluating information to assess the possibility for recovery of critical or rare earth minerals at mine sites to offset remediation or redevelopment costs associated with land reuse at Superfund or closed mine sites. This protocol provides a tool to implement metals recovery in conjunction with property reuse, and may involve a review of available records, visual inspections of the site, sample collection and discussions with local government officials and community members. The selection for metals recovery would be intended to both achieve metals reduction which may be required for the protection …

Predicting Sorption Of Diverse Organic Compounds In Soil-Water Systems: Meta-Analysis, Machine Learning Modeling, And Global Soil Mapping, Jiachun Sun, Kai Zhang, Huichun Zhang

Faculty Scholarship

In recent decades, the environmental detection of various organic compounds (OCs) has highlighted the limitations of conventional soil-water sorption models, which simplify complex experimental conditions and often overlook OCs with polyfunctional and ionizable structures. To address these shortcomings, we compiled a comprehensive soil-water sorption dataset encompassing 20,945 data points for 419 OCs with various functional groups and 1037 different soils. Meta-analysis of the dataset revealed the trends of soil sorption associated with OC substructures, soil properties, and solution conditions. Machine learning models employing the XGBoost algorithm, in conjunction with MACCS fingerprints and experimental conditions, were developed to cover the entire …