Digital Commons Network^™

Compact Heterogeneous Architectures And Algorithmic Methods For Enhanced Real-Time Digital True Time Delay Beamforming And Radar Applications, Nathan Lynn Burnett

Theses and Dissertations

Modern radar and signal processing systems require efficient computational architectures to handle increasing data rates while still being able to maintain dynamic configurability and complex tasks. This thesis presents and explores hardware and algorithmic approaches addressing these demands across several different applications. First, a low-cost tracking platform and architecture for unmanned aerial vehicles (UAVs) is developed, which provides detection and tracking capabilities, compliant with new FAA remote ID regulations. Second, a GPU-FPGA based digital true time delay beamformer is implemented to achieve real-time wideband radio frequency interference (RFI) mitigation. Specifically this beamformer explores weight calculation and calibration through particle swarm …

High Temperature In Potato: Plant Responses And Adaptive Cultivation Strategies To Increase Production, Siska Rahmayani Gultom, Jajang Sauman Hamdani, Kusumiyati

Jurnal Kultivasi

Climate change, with global temperatures rising by 1.09°C from 1850–1900 to 2011–2020, threatens potato production, a critical staple crop, by exceeding the optimal temperature range of 15–20°C. This review synthesizes over 45 peer-reviewed studies published between 2015 and 2025 from Google Scholar and ScienceDirect to evaluate the physiological, morphological, and tuber quality responses of potatoes to high temperatures and to identify adaptive cultivation strategies for sustainable production. High temperatures reduce photosynthetic efficiency through chlorophyll degradation and stomatal closure, increase respiration, and divert photosynthates to vegetative growth, leading to 18–32% yield losses globally by the 2050s. Heat-tolerant varieties, such as Atlantic …

Versatile Waveform Generation And Clocking Techniques For Rfsoc-Based Digital Designs, Michael David Jones

Theses and Dissertations

Within an ever-evolving radio-frequency (RF) environment, designers are required to adapt systems to increasingly constricted parameters. The available tools continually grow to match this need, but so does the complexity in using them. The radio-frequency system-on-chip (RFSoC) is an innovation that combines a field-programmable gate array (FPGA) with an integrated RF chain. Designing with an RFSoC allows for high-precision data transmission, sampling, and processing, but it can be difficult and time-consuming to develop specialized circuits. The open-source CASPER project aims to provide a library of abstracted block-design components to simplify the design process. An arbitrary waveform generator (AWG) is created …

Hybrid Organic–Inorganic Corrosion Inhibitors: Bridging Performance And Eco-Safety, Hasan M. Luaibi, Saja S. Al-Tweel

AUIQ Technical Engineering Science

Corrosion leads to global economic losses exceeding $2.5 trillion annually and accounts for up to 30% of infrastructure failures. Conventional corrosion inhibitors face limitations such as aquatic toxicity (LC50 <100 mg/L), moderate efficiencies (65–82%), and poor long-term durability (<500 hours). This review critically evaluates hybrid organic–inorganic corrosion inhibitors, focusing on their composition, mechanisms, performance metrics, and eco-safety. Hybrid systems comprising organic molecules integrated with inorganic matrices like sol–gel networks, nanocomposites, and layered double hydroxides (LDHs) demonstrate enhanced functionality through barrier effects, self-healing, and controlled release. These materials achieve inhibition efficiencies of 88–98.5%, outperforming conventional systems by 18–35%. Sol–gel coatings protect carbon steel at 92–98% efficiency in 3.5% NaCl, while LDHs sustain 94–97% protection over 1200–1500 hours. Nanocomposites reduce corrosion rates from 0.95 mm/year to 0.002–0.004 mm/year. Electrochemical techniques (EIS, PDP) show increased charge transfer resistance (500–2500 Ω·cm²) and coating resistance up to 10⁸ Ω·cm². Surface analysis reveals smoother films (Ra = 15–35 nm), higher contact angles (95–125°), and adhesion strengths of 12–18 MPa. Case studies report 90–96% protection in marine settings, 88–94% in acidic media, and over 92% under atmospheric conditions. Durability tests confirm >90% efficiency after 1000 hours, significantly higher than the <60% for conventional coatings. Overall, hybrid inhibitors offer a high-performance, eco-conscious alternative for corrosion control, combining efficiency, environmental safety, and scalability. Their superior metrics and adaptability position them as next-generation solutions for diverse industrial applications.

Development Of Numerical Tools And Performance Metrics For Analysis Of Optical Particle Counters, Doug Webb

Theses and Dissertations

Monitoring air quality is essential for understanding and mitigating the health impacts of airborne particulate matter (PM), which is linked to respiratory and cardiovascular disease. Optical particle counters (OPCs) are widely used for air quality monitoring, yet their precision and accuracy remain uncertain due to inconsistent performance evaluations. In this thesis, performance metrics are developed that can be used to assess the accuracy of OPCs in measuring PM concentrations and size distributions. Computational fluid dynamics (CFD) simulations are employed to analyze the behavior of particle-laden air streams through representative OPC models. The impact of design parameters is quantified using newly …

Exploring The Role Of Accessibility In Enhancing User Experience: Trends, Challenges, And Opportunities Across Digital Platforms, Adiba Khan

Harrisburg University Dissertations and Theses

Accessibility was a fundamental aspect of enhancing user experience (UX) across digital platforms, ensuring equitable access to information and services for a diverse range of users, including individuals with visual, auditory, cognitive, or motor impairments. As digital products became increasingly central to education, commerce, and communication, the need for inclusive design grew. This study explored the intersection of accessibility and UX, with a specific focus on how accessibility-driven design improved usability, user satisfaction, engagement, and the overall quality of digital interactions. Grounded in Agile project management principles, the research examined how early integration of accessibility into the software development lifecycle …

Tracing Tremor: From Upper-Limb Neuromusculoskeletal Dynamics To Movement Signatures In Essential Tremor, Landon J. Beutler

Theses and Dissertations

Tremor is a common neurological condition that significantly impairs the quality of life for millions. Despite this prevalence, the underlying mechanisms of its propagation remain poorly understood, and current treatment options often rely on trial-and-error methods. Moreover, the most common type, Essential Tremor (ET), presents a unique challenge due to its heterogeneity--patients exhibit a wide range of symptoms, severities, and responses to treatment. This thesis primarily advances tremor understanding through computational modeling, with a secondary focus on data-driven subtyping of ET via cluster analysis. These parallel paths aim to improve both mechanistic insight and clinical classification. Tremor propagation refers to …

Development Of Low-Cost Small-Batch Flibe Filtration, And A Comparison Of Uranium Tetrafluoride And Ionic Oxygen Oxidation In Flibe, Jacob D. Christensen

Theses and Dissertations

Low-cost benchtop-scale molten fluoride salt cleaning was investigated in FLiBe (LiF-BeF2), focusing on electrochemical cleaning and filtration. FLiBe filtration was demonstrated using both pressurized and open filtration systems. Copper and 400 Monel meshes were effective and reusable. Wetting appears to be the primary obstacle to FLiBe filtration. Oxygen oxidation behavior in FLiBe was examined using cyclic voltammetry (CV) and cyclic square wave voltammetry (CSWV) techniques. Standard addition height measurement was used to determine electrode surface area. Results support a single-step 2-electron process, matching observations in literature. Pt electrodes may be prone to oxidative side reactions, although more investigation is required. …

Genetic Algorithm Optimization To Maximize Sensitivity Of Triboelectric Mems Accelerometers, Yu Tian, Benyamin Davaji, Shahrzad Towfighian

Mechanical Engineering Faculty Scholarship

A genetic algorithm is used to optimize the sensitivity of a triboelectric MEMS accelerometer fabricated using CMOS-compatible processes. The optimization focuses on the structural parameters of an awl-shaped serpentine microspring (ASSM) connected to the proof mass. Constraints are defined by microfabrication standards and the available chip area. Three different constraint problems are considered, and the algo- rithm yields designs with maximized sensitivity in each case. Simulations under various sinusoidal vibration scenarios show that the optimized designs significantly outperform the previous version, achieving a 2.72× improvement at 1000 Hz and up to 20× at 500 Hz.

Calibration And Validation Of The Thermal Finite Element Model For Er120s-G Wire Arc Directed Energy Deposition Using Infrared Cameras And Thermocouples, Joshua Mykl Bassett

Theses and Dissertations

Wire Arc Directed Energy Deposition (WA-DED) is a promising additive manufacturing method for producing large metallic components with high deposition rates and low costs. However, its rapid heat input can lead to residual stress, microstructural changes, and dimensional inaccuracies. Accurate thermal modeling is essential to mitigate these effects. This study presents a thermal calibration of a finite element model (FEM) for ER120S-G using thermocouples and infrared (IR) imaging. Thermal data were gathered from three experiments to complete the calibration of the FEM . Calibration focused on tuning the Goldak heat source parameters, power efficiency, and heat transfer coefficients to minimize …

Towards Applying Artificial Intelligence To Solve Np-Complete Problems Using Quantum Computing, Andrew Robert Haverly

Theses and Dissertations

This dissertation explores the methodology for more thoroughly entangling artificial intelligence and quantum computing. This is explored through a background search of problems solved using Grover’s quantum algorithm, a new quantum protein folding and drug discovery algorithm, using Grover’s algorithm to train quantum artificial neural networks, using quantum artificial neural networks for reinforcement learning, mapping classical assembly instructions to quantum circuits to make quantum programming easier, and using prompt engineering to get a classical artificial intelligence agent to solve an NP-Complete problem using a Grover’s algorithm. This method not only simplifies the creation of algorithms but also opens new avenues …

Interatomic Potential Of Multiphase Materials Using Modified Embedded Atom Method (Meam) And Artificial Neural Network (Rann), Henan Zhou

Theses and Dissertations

There is a significant need for computer simulations to explore multiphase materials because of their significance in both industry and research. These simulations are both more efficient and less expensive than many experimental approaches, making them an ideal choice for this purpose. It is possible to use molecular dynamics simulations that make use of the MEAM and RANN interatomic potentials in order to comprehend and characterize the properties, performance, and behavior of materials at the atomic scale of different material phases. In the realms of elements, alloys, and impurities, MEAM can be utilized in a wide variety of applications. Through …

Reactive Molecular Dynamics And Method Development For Applications In Renewable Energy And Sorption Equilibria, Woodrow Wilson

Theses and Dissertations

It is crucial to harness energy from sustainable sources to combat the dwindling nonrenewable feedstocks used to produce everyday commodities and fuels. Liquid-phase heterogeneous catalysis has demonstrated remarkable product selectivity and yields for reactions relevant to biomass valorization under mild operating conditions. However, active site characterization is challenging due to the complex solvated environment and interface. Ground-state first-principles (FP) molecular simulations have provided insights into reactive systems in catalysis. These calculations, however, scale poorly with the number of electrons. Observing atomic motion with molecular dynamics (MD) or sampling static properties with Monte Carlo (MC) simulations at statistically relevant lengths- and …

Seasonal Variation In Modulus Of Cement-Treated Base Layers And Untreated Base Layers In Utah, Mason Robert Kessler Millard

Theses and Dissertations

The objective of this research was to compare the stiffness of cement-treated base (CTB) layers and untreated base course (UTBC) layers in a cold region through a typical year. The scope of work included testing of three residential pavement segments comprising CTB layers and two comparable pavement segments comprising UTBC layers in northern Utah. Design thicknesses were verified through drilling and dynamic cone penetrometer testing in September 2024. Following 3 to 15 years of service, the sites were evaluated using portable falling-weight deflectometer (PFWD) testing in May 2024, July 2024, September 2024, November 2024, January 2025, and March 2025. After …

Rotor Interaction Aerodynamics: Influence Of Phase And Spacing On Wake And Pressure Behavior, Nathan D. Welker

Theses and Dissertations

This dissertation explores the aerodynamic behavior and interactions in the flow-fields of dual rotor systems. The experiments used Particle Image Velocimetry (PIV) combined with pressure and force measurements to characterize the flow with an emphasis on side-by-side rotor flows at small separation distances. This work is separated into six main chapters: first, the topic is introduced with a thorough literature review in Chapter 1, the methodology and details of the experiments are discussed in detail in Chapter 2; the effects of phase offset on dual-rotor rotor flows is explored in Chapter 3; the influence of separation distance on the side-by-side …

Novel Nanomaterials For Developing Bone Scaffolds And Tissue Regeneration, Nazim Uddin Emon, Lu Zhang, Shelby Dawn Osborne, Mark Allen Lanoue, Yan Huang, Z. Ryan Tian

Cell and Molecular Biology Faculty Publications and Presentations

Nanotechnologies bring a rapid paradigm shift in hard and soft bone tissue regeneration (BTR) through unprecedented control over the nanoscale structures and chemistry of biocompatible materials to regenerate the intricate architecture and functional adaptability of bone. This review focuses on the transformative analyses and prospects of current and next-generation nanomaterials in designing bioactive bone scaffolds, emphasizing hierarchical architecture, mechanical resilience, and regenerative precision. Mainly, this review elucidated the innovative findings, new capabilities, unmet challenges, and possible future opportunities associated with biocompatible inorganic ceramics (e.g., phosphates, metallic oxides) and the United States Food and Drug Administration (USFDA) approved synthetic polymers, including …

Coding For Nonstandard Channels: A Capacity-Oriented Approach, J Daniel Harman

Theses and Dissertations

This work addresses the issue of coding for non-standard channel models with an emphasis on capacity-oriented channel analysis and system design. The first channel studied is the Wyner wiretap channel. Channel sounding results were obtained to calculate the capacity for the multi-antenna case of the Wyner wiretap channel to ascertain the potential for secure communication via secrecy coding. The second channel studied is an asymmetric binary crossover erasure channel (ABCEC) with a short-blocklength constraint. The capacity for this channel was derived, and linear codes were chosen and tested. Another study was conducted on the ABCEC within a degraded wiretap channel …

Assembly Of Non-Close-Packed Poly(N-Isopropylacrylamide) Microgels On Metal Halide Perovskite Films, Amal Alruwaili, Osama M. Alkhudhari, Ran Wang, Zhenyu Jia, Jennifer M. Saunders, Eugenio Picheo, Daniel T.W. Toolan, L. Andrew Lyon, Brian R. Saunders

Engineering Faculty Articles and Research

Hypothesis

Experiments

Predicting The Yield Strength Of Aluminum Alloys Based On Composition, Clinton K. Waite

Theses and Dissertations

This work describes a model to predict the yield strength of aluminum alloys, in either an annealed or T6 (peak aged) state, based solely on its composition. This is accomplished through the analyses of strengthening mechanisms common to aluminum, of which a novel semi-empirical model to predict precipitation strengthening is discussed. Solid solution strengthening and grain boundary strengthening are more simplistically considered but with significant accuracy. It is shown that by combining the strength contributions of each strengthening mechanism, the overall yield strength can be predicted by its composition in any of the 1xxx-7xxx series alloys. This allows the model …

Volumetric Imaging Of Cellular Dynamics Using Light-Sheet Microscopy: From Subcellular Structures To Whole Organisms, Md Nasful Huda Prince

Optical Science and Engineering ETDs

Advancing biomedical imaging requires platforms that combine high-resolution, speed, and stability across biological scales. This dissertation presents three innovations designed to address limitations of conventional light-sheet and oblique plane imaging. First, we introduce Reflected Inline Detection in Epi-Oblique Plane Microscopy (RIDE-OPM), a compact and drift-resistant system that eliminates a tertiary detection path while maintaining alignment flexibility, enabling robust long-term live imaging. Second, we present a high-speed Axially Swept Light-Sheet Microscopy (ASLM) platform for cleared tissues, using dual foci and synchronized sweeping to achieve isotropic sub-micron resolution at up to 40 frames-per-second, a fourfold improvement over standard ASLM. Integrated with a …

Combined Passive And Active Ultrasonic Stress Wave Monitoring Of A Full-Scale Laboratory Reinforced Concrete Bridge Column Subject To Reverse-Cyclic Lateral Loading, Niklas Epple, Thomas Schumacher, A. K. M. Golam Murtuz, Ernst Niederleithinger, Peter Dusicka

Civil and Environmental Engineering Faculty Publications and Presentations

Effective monitoring of reinforced concrete structures requires techniques that detect early-stage material change and active, localized cracking. This study investigates a combined structural health monitoring approach using passive acoustic emission and active ultrasonic methods on a full-scale reinforced concrete bridge column subjected to reverse-cyclic lateral loading. Active monitoring, based on coda wave interferometry, was used to track changes in wave velocity and waveforms, while passive acoustic emission monitoring was used to detect crack activity. The instrumentation consisted of three embedded ultrasonic transducers and three surface-mounted acoustic emission sensors. The results show that active ultrasonic monitoring is most effective prior to …

Recent Advances In Developing Cell-Free Protein Synthesis Biosensors For Medical Diagnostics And Environmental Monitoring, Tyler P. Green, Joseph P. Talley, Bradley Charles Bundy

Faculty Publications

Cell-free biosensors harness the selectivity of cellular machinery without living cells’ constraints, offering advantages in environmental monitoring, medical diagnostics, and biotechnological applications. This review examines recent advances in cell-free biosensor development, highlighting their ability to detect diverse analytes including heavy metals, organic pollutants, pathogens, and clinical biomarkers with high sensitivity and specificity. We analyze technological innovations in cell-free protein synthesis optimization, preservation strategies, and field deployment methods that have enhanced sensitivity, and practical applicability. The integration of synthetic biology approaches has enabled complex signal processing, multiplexed detection, and novel sensor designs including riboswitches, split reporter systems, and metabolic sensing modules. …

Analysis And Predictive Modeling Of Stall And Spin Accidents In General Aviation Fixed-Wing Aircraft, Mehedi Hasan

Graduate Theses and Dissertations

Stall and spin accidents represent a persistent safety concern in General Aviation, with approximately 41% resulting in fatalities despite their relatively low occurrence. This study analyzes 1,079 General Aviation stall and spin accidents from 2008 to 2023 using the National Transportation Safety Board accident database. Our analysis identified the top phases of flight, injury outcomes, and causal factors in stall/spin accidents. Findings indicate that over 93% of stall/spin events involved General Aviation aircraft, with most accidents occurring during initial climb, takeoff, or low-altitude maneuvering. Pilot-related control errors, especially poor airspeed and angle-of-attack management, were the most common causes. To assess …

Engineered Interfaces For Enhanced Transient Liquid Phase Bonding In Electronics Assembly, John Russell Harris

Graduate Theses and Dissertations

Growing applications in transportation make power density a key optimization target in the power electronics industry. More power in a shrinking environment leads to high heat flux and junction temperatures that damage silicon-based switching devices. Temperatures approaching 175℃ can result in false triggering of the device’s activated state, resulting in short circuits. Developing wide bandgap semi-conductors, such as gallium nitride and silicon carbide, are less susceptible to this complication as the energy from elevated temperature is a smaller fraction of what would be required to trigger the device. These devices are projected to function reliably in environments of up to …

Cultivation Of Botryococcus Braunii For The Production Of Hydrocarbons Suitable For Fuel Use, Bryan C. Carroll

All Theses

Energy security, rural poverty, and climate change are pressing issues of our time. Biofuels provide a solution to these issues, with a focus on sustainable aviation fuel, SAF, due to compatibility with aircraft infrastructure and energy density. This research aims to review and produce knowledge about a specific microalga, Botryococcus braunii, for its potential for SAF. First a literature review on the process was conducted followed by an experimental study on the impact of aqueous media and inorganic carbon its growth and hydrocarbon content. The literature review found the process consists of cultivation followed by lipid extraction or hydrothermal …

An Active Quasi-Circulator Ic And Technique For 1-255 Mhz Resonance-Based Spectroscopic Impedance Plethysmography, Sharisse Poff

Theses and Dissertations

Impedance measurement is a promising avenue for noninvasive glucosemonitoring. Specifically,resonance-basedimpedancemeasurements exhibit good correlation with glucose levels at excitations from tens of MHztoover 100 MHz. Additionally, plethysmographic impedance measurements are needed to separate arterial blood signals, which contain strongerglucose information, frominterstitialfluidsignals. Weanticipate that plethysmographic measurements across a range of frequencies— spectroscopic plethysmography—at excitations from tens to over 100 MHz could enable resonance-based monitoring with higher selectivity for arterial glucose than previous work. Afour-point impedance measurement circuit is designed, and its ability to measure constant and periodically time-varying impedance is demonstrated. This circuit presents high impedance to the device-undertest (DUT), which fails …

Reinforcement Learning And Virtual Human Animation: A Novel Approach To Data-Driven Animation, Portraying Dynamic, Flexible Human-Like Behaviours, Vihanga Gamage

Dissertations

Virtual characters require animation capable of portraying dynamic, context-sensitive human-like behaviours. Several approaches to generating such animation have been developed, but each carries limitations. Motion capture can produce high-fidelity animation but is expensive and ill-suited to systems that must respond in real time. Physics-based reinforcement learning (RL) enables flexible, dynamic behaviour portrayal, yet relies on simulation feedback signals that are unavailable for social gestures. Supervised approaches can learn social behaviours from motion capture data but yield agents with limited flexibility and generalisation.

This thesis presents RLAnimate, a model-based, data-driven RL framework for character animation that enables a single agent to …

Evaluating (Bio)Degradation Of Carbon Tetrachloride In Fe(Iii)-Reducing Environments, Adam Rogers

All Theses

Understanding degradation of carbon tetrachloride in-situ is vital for many remediation projects across the world, yet conclusive evidence of its feasibility is lacking in previous studies.

The main objective of this research is to assess the potential for carbon tetrachloride attenuation by biological, abiotic, and combined processes in a Fe(III)-reducing aquifer. In doing so, it assesses the effect of pH and stoichiometric ratio on abiotic degradation of carbon tetrachloride using various reducing agents, evaluates iron-mediated versus direct biotic degradation of carbon tetrachloride using pure cultures under resting and growth conditions, and characterizes the effects of culture strain, electron acceptors and …

Bike/Ped Data Collection And Model Calibration, Eirini Stavropoulou, Dionysios Tzamakos, Nikiforos Stamatiadis, Reginald Souleyrette, Teng Wang

Kentucky Transportation Center Research Report

Motivated by an uptick in pedestrian and bicycle traffic, as well as the inclusion of pedestrian and bicyclist weights in the Strategic Highway Investment Formula For Tomorrow, the Kentucky Transportation Cabinet (KYTC) has made significant investments in transportation facilities for nonmotorized users. Despite an intensified focus on the needs of nonmotorized users, KYTC has not yet established a formal program to track the number of people walking, biking, skateboarding, and using micromobility devices statewide. Based on a review of methods and technologies for counting nonmotorized users; analysis of counting programs established by local, state, and regional transportation agencies; and a …

An Injectable, Dual-Curing Hydrogel For Controlled Bioactive Release In Regenerative Endodontics, Meisam Omidi, Daniela S. Masson-Meyers, Jeffrey M. Toth

Biomedical Engineering Faculty Research and Publications

Regenerative endodontics seeks to restore the vascularized pulp–dentin complex following conventional root canal therapy, yet reliable neovascularization within the constrained root canal remains a key challenge. This study investigates the development of an injectable, dual-curing hydrogel based on methacrylated decellularized amniotic membrane (dAM-MA) and compares its performance to a conventional gelatin methacryloyl (GelMA). The dAM-MA platform was designed for biphasic release, incorporating both free vascular endothelial growth factor (VEGF) for an initial burst and matrix-metalloproteinase-cleavable VEGF conjugates for sustained delivery. The dAM-MA hydrogel achieved shape-fidelity via thermal gelation at 37 °C and possessed tunable stiffness (0.5–7.8 kPa) after visible-light irradiation. …