Digital Commons Network^™

A New Model For Predicting Two-Zone Parameters Based On Geometric Modifications In Computational Fluid Dynamics Simulations, Jason B. Metten

Theses and Dissertations

This study uses Computational Fluid Dynamics (CFD) to create a new and improved model for key Two-Zone modeling parameters, 𝜒 and 𝛿2𝑝. It explores how geometric changes to centrifugal compressors impact these modeling parameters. While centrifugal impellers are an important part of many systems, the flow through such impellers is inherently complex, making performance often difficult to predict. There are many approaches for modeling this complex flow environment, one method being the Two-Zone model developed by Dave Japikse. Values for 𝜒 and 𝛿2𝑝 are often determined from data obtained from test rigs or correlations. In this study high-fidelity CFD simulations …

Dem Simulations For Tractive Performance Of Rigid Wheel In Granular Media, Aidan Noah Dickerson

Theses and Dissertations

Accurately predicting vehicle mobility in granular media is essential for evaluating off-road mobility in agriculture, defense, and planetary exploration. Traditional empirical models often fail in capturing complex micromechanics of soil deformation, especially under dynamic conditions such as high slips and maneuvering. This study demonstrates the value of the discrete element method (DEM) in modeling wheel-soil interactions with higher fidelity. Using Altair EDEM and pre-calibrated GEMM materials, simulations were conducted for a range of forward (-5.9% to 54.8%) and side slip angles (3°, 6°, 12°) in dry sand. DEM enabled detailed analysis of sinkage, traction forces, and lateral loads, revealing trends …

Electrospun Nanofiber Creation With Varying Polymer-Solvent Combinations For Air Filtration, Lancaster Jace Hill

Theses and Dissertations

This study aims to analyze various polymer-solvent combinations for electrospun creation of nanofiber media and to determine the best-suited solution for lab-grade electrospinning. Suitable solutions allow for controlled morphology of fiber diameters and for efficiency of media creation. The principal variables are solvent, concentration, and voltage. Humidity and temperature play a secondary variable role. The solution must withstand an electric field of ≤30 kV and be insoluble in water to maintain desired morphology and structure. Manipulation of the solutions and variables allow for fiber diameter optimization and beading minimization. High temperature filter applications require efficiency in intense heat and preservation …

Electrochemical Detection Of No And Ca2+ During Cold Atmospheric Plasma Treatment Of Acute Wounds: Sensor Selectivity And Stability In The Plasma-Bio-System, Jonathan E. Thomas, Kristina Pattison, Suneel Kumar, Gagana Karkada, Duncan Trosan, Aunic Goodin, Jason Rainone, Dnyaneshwari Rananavare, Vandana Miller, Francois Berthiaume, Katharina Stapelmann

Kimmel Cancer Center Faculty Papers

Cold atmospheric plasmas (CAP) are a versatile tool in medical applications like wound healing. Its therapeutic benefits are partially attributed to the generation of biologically active reactive oxygen and nitrogen species (RONS). Characterization of RONS, however, typically only occurs after treatment. Here we report the first real-time in situ detection of CAP-generated nitric oxide (NO), and the simultaneous detection of cellular calcium ions (Ca²⁺) release using electrochemical sensors during CAP treatment of murine wounds. In vivo, NO rose rapidly within the first minute of CAP treatment but accumulated less overall than in PBS, reflecting reactions with wound-bed targets. In situ …

Physics-Informed Neural Network For Maximum Detectable Distance Estimation In Mobile Gamma Spectrometry, Nancy A. Ibrahim

Theses and Dissertations

Accurate estimation of the Maximum Detectable Distance (MDD) is critical for environmental remediation, nuclear incident response, and public safety. Conventional approaches assume stationary detectors and rely on computationally intensive simulations, limiting their applicability for mobile, real-time surveys. Mobile gamma spectrometry introduces additional complexities due to detector motion, variable acquisition times, and heterogeneous backgrounds. This study addresses the central question of how effectively a Physics-Informed Neural Network (PINN) can estimate MDD for mobile gamma spectrometry, while maintaining both accuracy and computational efficiency under dynamically changing environmental conditions. A multi-phase approach was employed, combining field data collection, computational modeling, and operational tool …

Power Resilience In Utah's Water Sector: A Survey Of Stakeholder Practices, Preferences And Potential, Tyler Christopher Peterson

Theses and Dissertations

Drinking water and wastewater services are vulnerable to disruptions because they rely heavily on the electric grid. As a result, power outages can lead to water outages, creating cascading failures that compromise sanitation, firefighting, healthcare, and daily routines. Although an important topic, there are little to no studies of water and wastewater power resilience at a geographic or state level. In this study we investigate the extent of existing backup power and renewable energy integration as well as the motivations and barriers around their power resilience. We collect our data through semi-structured interviews with staff at 19 urban and rural …

Experimental And Theoretical Characterization Of Molten Salt Thermal Conductivity, Jacob C. Numbers

Theses and Dissertations

Molten salts form an ideal heat transfer fluid for advanced energy generation systems, including molten salt reactors (MSR). Accurate characterization of molten salt thermal conductivity is needed to confidently predict transient thermal behavior and optimize salt properties. Measurements are hindered by salts' challenging material properties, which---in the case of the needle probe device---induced unaccounted physical changes that limited its accuracy and repeatability. Sparse thermal conductivity data in general is exacerbated by a limited fundamental understanding of molecular energy transfer in liquids. This work extends the experimental capacity for compositional studies using the needle probe and proposes a theoretical model for …

Advancing Sustainable Co2 Mitigation: Experimental And Computational Analysis Of Thermal Carbon Chitosan Sorbent For Automotive Exhaust Capture, Dalia A. Ali Dr., Amir Ahmed Elgamal Eng., Rania Rushdy Moussa Dr.

Chemical Engineering

This study investigated the efficiency of thermal carbon chitosan (TCCS) sorbent for CO2 capture from vehicle exhaust emissions within a designed adsorption system. TCCS was synthesized and meticulously characterized using a series of analytical techniques, including Brunauer-Emmett-Teller (BET) surface area analysis, Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Ther- mogravimetric Analysis (TGA), Energy Dispersive X-ray Spectroscopy (EDX), and Differential Scanning Calo- rimetry (DSC). The TCCS adsorbent showed high thermal stability and a heating value (HHV) of 23.5 MJ/kg. Adsorption isotherm study demonstrated that the maximum capacity of CO2 adsorption is 0.084 kg.CO2/kg. TCCS, as well …

Performance Of Adaptive Wingtips On A Tailless Supersonic Business Jet, Khushi Piparava

2025 Fall Honors Capstones Projects - Archive

The growing interest in supersonic business travel has renewed focus on efficient, low-drag configurations that can achieve high performance while maintaining stability and structural integrity. This research investigates the aerodynamic and structural implications of adaptive folding wingtips on a tailless supersonic business jet (SBJ) concept designed under the SkyBreaker senior design program. Using a conceptual aerodynamic model based on linearized supersonic theory, the Polhamus leading-edge suction analogy, and an empirical compression-lift correlation, the study evaluates how varying wingtip droop angles influence lift, drag, lift-to-drag ratio (L/D), and static stability. The analysis was performed parametrically in MATLAB, using geometry inputs derived …

A Review Of Bioactive Compounds Of Caesalpinia Sappan: Pre- And Post-Harvest Effect, Annisa Lugina Rachman, Santi Rosniawaty, Syariful Mubarok, Cucu Suherman, Yudithia Maxiselly

Jurnal Kultivasi

Sappanwood (Caesalpinia sappan L.) is a shrub or small tree that thrives in tropical regions and has been widely distributed across various areas. It has long been used as a natural dye in textiles, cosmetics, and herbal beverages due to its content of various bioactive compounds. This literature review discusses the secondary metabolites in sappanwood, their health benefits, and strategies to enhance product quality through pre-harvest and post-harvest treatments. This literature review was conducted by searching for relevant journals on Google Scholar using relevant keywords. Sappanwood contains diverse secondary metabolites, including flavonoids, phenolics, anthraquinones, triterpenoids, steroids, alkaloids, and tannins, with …

Philosophy Of Culinary Arts: Reading Truth Through Language And Taste, Devi Dwi Purwanto, Aji Prasetya Wibawa, Syaad Patmanthara

Bulletin of Culinary Art and Hospitality

The development of Natural Language Processing (NLP) technology has transformed the way we analyze and understand culinary arts through a digital approach. NLP enables the transformation of empirical and sensory culinary knowledge into structured data that can be analyzed computationally. This technology opens up opportunities to explore the relationships between ingredients, techniques, and flavors in culinary arts, as well as to represent culinary reality in a more organized form. This study aims to identify how NLP can represent the relationships between ingredients, techniques, and flavors in culinary arts and their impact on the structure of culinary knowledge from an epistemological, …

Collaborative Research: Fair + R: Building The Future Of More Reproducible Water Research Through Community Best Practices, Software Tools, Cohort Building, And Policy Change., James H. Stagge, David E. Rosenberg, Sierra Young

Civil and Environmental Engineering Faculty Publications

This project aims to create a pathway towards a future, ten years from now, when a majority of published research across geosciences is not only FAIR (Findable, Accessible, Interoperable, and Reusable), but reproducible by a third party. Building on the Center for Open Science framework for cultural change, this project is organized around four scaffolded goals: improving infrastructure and tools, building community support, aligning incentives, and minimizing barriers to policy change. We will systematically analyze 300-500 publications from leading hydrology and water resources journal to quantify changes in reproducibility rates since 2017 and identify the tools and practices that best …

Space Agriculture: A Comprehensive Systems-Level Review Of Challenges And Opportunities, Hassan Fazayeli, Aaron Lee M. Daigh, Cassandra Palmer, Santosh Pitla, David Jones, Yufeng Ge

Biological Engineering Faculty Publications

As humanity prepares for prolonged space missions and future extraterrestrial settlements, developing reliable and resilient food-production systems is becoming a critical priority. Space agriculture, the cultivation of plants beyond Earth (particularly on the Moon and Mars), faces a constellation of interdependent environmental, biological, and engineering challenges. These include limited solar radiation, elevated ionizing radiation, large thermal variability, non-Earth atmospheric pressures, reduced gravity, regolith substrates with low nutrient-holding capacity, high-CO₂/low-O₂ atmospheres, pervasive dust, constrained water and nutrient availability, altered plant physiology, and the overarching need for closed-loop, resource-efficient systems. These stressors create an exceptionally challenging environment for plant …

Collaborative Research Bpe Track 2: Disability Dcl - Capturing Narratives That Characterize Neurodivergent Strengths And Weaknesses, Marissa A. Tsugawa

Funded Research Records

No abstract provided.

Wasatch Front Multi-Modal Corridor Electrification Plan, Regan Zane

Funded Research Records

No abstract provided.

Smart Pireps: Leveraging Technology To Simplify Pilot Weather Reporting In General Aviation, Emma Hellwege

Honors Projects

This honors project examines how emerging aviation technologies can support or automate components of Pilot Weather Reports (PIREPs) to improve reporting accuracy, reduce pilot workload, and increase participation within the general aviation (GA) community. PIREPs provide essential real-time weather observations—such as turbulence, icing, and visibility—that supplement automated systems and enhance situational awareness for pilots, air traffic control, and meteorologists. However, reports are vastly underutilized due to workload constraints, inconsistent training, voice-only submission methods, and technological disparities across the GA fleet.

Through a structured analysis of federal aviation documentation, sensor capabilities, human factors research, and recent advancements in automation, this study …

The Safety Kuznets Curve: Context In Occupational Safety, Andy Knickerbocker

ASEM Capstones

2025 ASEM 620 Capstone Project

An Innovative Hdm Model For Assessing Renewable Heat Energy Resources In Utility Energy Systems, Mark Alan Ryan

Dissertations and Theses

Renewable Heat Energy projects exhibit numerous unique, complex, and often conflicting characteristics, including varying project sizes, diverse energy resources, stakeholder demands, and significant challenges in energy conversion applications. Traditionally, cash flow analysis and return on investment are the most widely recognized metrics for evaluating remote energy projects. However, numerous quantitative and qualitative factors influence the overall performance and success of Renewable Heat Energy System (RHES) projects. A comprehensive approach using advanced tools is essential for assessing the factors and criteria that significantly impact these projects.

This research investigates the key quantitative and qualitative factors that contribute to the successful implementation …

Environmental Risk Assessment Of Textile Waste From Bio-Engineered Fibers In The Fashion Industry, Aayush Pankaj Agarwal, Harshit Soral, Irmak Aktan, Karol Montserrat Gonzalez Saad, Maria Daniela Saa Espinosa, Sheetal Suhas Dhanuka, Yi Yang

Harrisburg University Dissertations and Theses

The global fashion industry generates over 92 million tons of textile waste annually, a figure projected to increase significantly by 2030. Bio-engineered fibers, including bacterial cellulose, mycelium-based leather, and recombinant protein textiles emerge as sustainable alternatives to conventional fibers. Despite their promise, recent evidence suggests that these fibers may pose environmental risks at the end-of-life stage, such as incomplete biodegradation in landfills, microfiber shedding, and chemical leaching from dyes and coatings. The purpose of this study is to examine how these risks are represented through scientific literature, corporate sustainability reports, and policy frameworks, and to identify strategies for integrating risk …

The Role Of Artificial Intelligence In Reducing Internet Crimes Against Children, Malyssa Shaw

Student Scholar Symposium Abstracts and Posters

When generative artificial intelligence (AI) first surfaced and broke into the public sphere, my immediate concern was in its development, implementation, and harmful applications. I was not surprised when deepfake technology rapidly advanced alongside these new developments and impacted women and children worldwide. Disproportionately, they have been made victims of intimate media forgery as early as the 1990s, with an unprecedented uptick in recent years as a direct result of these developments. In response, I wrote "Deepfake, Real Harm: Protecting Children in the Age of AI", analyzing data specifically regarding child sexual abuse material (CSAM) created with artificial intelligence while …

Artificial Intelligence In Higher Education: Opportunities And Challenges, Maytha Al-Ali, Adam Marks, Jasur Umirzokov, Noura Metawa

Iraqi Journal for Computer Science and Mathematics

While AI is often presented as a panacea for the challenges facing higher education, there is limited empirical evidence supporting its effectiveness in improving student learning and institutional performance. This gap between expectation and reality emphasizes the need for rigorous research, realistic goal-setting, and careful planning to ensure that AI technologies deliver on their promises in higher education. This study contrasts the potential utilization of AI technologies in Higher Education from the literature, against actual utilization in universities. The study also investigates the key barriers of AI implementation in higher education. This study uses a mixed-research methods approach, including case …

The Impact Of Infrastructure Construction And Remodeling Of Cities On Its People' Quality Of Life Miraj District-(Madi-Cairo) As A Geological Heritage Area, Ahmed M.E. Hammad

Mansoura Engineering Journal

Rapid urbanization is increasing globally, the urbanization rate expected to rise to more than 66% by 2050. (According to UN estimates) the increasing rates of urbanization in the world means adding 2.5 billion people to the urban population within a short period. Which necessitates increasing the traffic axes and the rest of the networks in terms of lengths and widths within the existing cities, and with the presence of the population during these works - despite their inevitability - the quality of their urban life is affected socially, naturally and economically. the research monitors these effects and the extent of …

Fabrication And Evaluation Of Large Alumina Crucibles By Vat Photopolymerization Additive Manufacturing For High-Temperature Actinide Chemistry, R. Joey Griffiths, Christy Santoyo, Jean-Baptise Forien, Bradley Childs, Andrew J. Swift, Andrew Cho, Alexander Wilson-Heid, George Ankrah, Devin Rappleye, Aiden A. Martin, Jason Jeffries, Kiel Holliday

Faculty Publications

Additive manufacturing (AM) offers opportunities to advance the design and function of ceramic tooling in high temperature actinide pyrochemistry. In technical ceramics such as alumina, conventional forming techniques often restrict design flexibility and can limit experimental progress. In this study, we investigate the use of vat photopolymerization (VP) with commercial resins to fabricate large-scale alumina crucibles, reaching dimensions up to 125 mm, which is significantly larger than typically reported for dense VP ceramics. Notably, these additively manufactured components are produced using consumer-grade hardware, which limits process control, but offers significant upside in scalability and accessibility. Using microscopy and X-ray computed …

Bridging Modalities: Enhancing Multimodal Sentiment Analysis For Social Media Networks, Misbah Ul Hoque

LSU Doctoral Dissertations

Social media platforms like X (formerly Twitter) serve as rich sources of textual and visual information, making multimodal sentiment analysis essential for understanding complex human emotions. This dissertation aims to advance multimodal sentiment analysis by improving the semantic alignment and fusion of textual and visual features, thereby enabling more accurate and context-aware sentiment interpretation of social media content.

To address challenges in multimodal integration, this work proposes two complementary MSA approaches. The first approach introduces a similarity-based multi-layer attention neural network (SiMANN) that enhances modality integration through cosine-based similarity fusion and modality-specific attention to emphasize salient features in text and …

Evaluating Kansai Airport's Ppp: Grounded Ambitions, Concession Of Financial, Geotechnical, And Climate Risk, Edmund Cho, Dimitrios V. Siskos

International Journal of Aviation, Aeronautics, and Aerospace

This study critically examines the Kansai Airports Group’s 44-year Public-Private Partnership (PPP) monopoly-type concession encompassing Kansai International (KIX), Osaka Itami (ITM), and Kobe (UKB) airports. The research uses financial analysis, Monte Carlo simulation, and NPV-at-risk modeling to evaluate how Japan’s fixed-term private monopoly model allocates financial, operational, and environmental risks. In 2015, there were significant developments in the promotion of the Private Finance Initiative (PFI) Act. It was revised in 2015; as a result, it finds that the underestimated long-term maintenance liabilities, especially Kansai airport (KIX) foundation subsidence, and lacked flexibility to manage exogenous shocks like COVID-19 and Typhoon Jebi. …

Production Of Recombinant Β-Galactosidase Protein In Bombyx Mori (Bmn1) Baculovirus Insect Cells, Shuhrat Sh. Khasanov, Jumanazar Ch Mengturayev, Jaloliddin M. Abdurakhmanov, Dilmurodjon B. Turdaliyev, Shakhnoz S. Azimova

CHEMISTRY AND CHEMICAL ENGINEERING

In this study we aimed to obtain a novel recombinant β-galactosidase baculovirus using the Bombyx mori baculovirus – insect cell expression system. A new recombinant plasmid was constructed on the basis of the pBacPAK8 transfer vector and cloned in E. coli cells. Subsequently, a recombinant baculovirus was generated in Bombyx mori cells, and efficient expression of the β-galactosidase gene was observed. The enzymatic activity of the protein was confirmed by the ONPG assay. The results demonstrated that the baculovirus – insect cell system expands the possibilities for producing proteins of industrial significance.

Photocatalytic Activity Of The Mixed Of Ti/Fe/Mo Oxide Composites For Degradation Of Nitrofurazone, Dilshoda R. Tursunova, Zuhra Ch. Kadirova, Shahlo Sh. Daminova, Kadriya Kh. Gabidullina

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of study is synthesize mixed oxide composites based on titanium dioxide, iron and molybdenum oxides from industrial waste materials and evaluated for their photocatalytic degradation performance of nitrofurazone—a persistent and toxic antibiotic frequently detected in aquatic environments. Various Ti/Mo ratios (T95M5, T87.5M12.5, T75M25, and T50M50) were prepared through thermal treatment at 600 °C and characterized using XRD, UV–Vis and Raman spectroscopy to assess structural and optical properties.XRD and Raman analyses confirmed the presence of anatase-phase TiO₂ and Mo/Fe oxides, with optimal crystallinity and heterojunction formation observed in the T87.5M12.5 composite. UV–Vis spectroscopic studies demonstrated that this composite exhibited …

A Novel Microfluidic Device For Preclinical Testing Of Chemotherapeutics, Kaija Saleh Ogan

Master's Theses

This work demonstrates the feasibility of a novel microfluidic tumor model that reproduces physiologically relevant nutrient gradients and endothelium–tumor interactions, validating its potential as a preclinical test platform. Finite element simulations of glutamine diffusion and fluid dynamics aligned with experimental tracer studies, and co-cultures supported directed endothelial migration toward tumor spheroids, confirming the device’s ability to mimic in vivo–like behavior.

Current preclinical models often fail to capture the complexity of the tumor microenvironment (TME), limiting their predictive value for therapeutic testing. Nutrient availability and angiogenic signaling are critical drivers of tumor progression, yet they are poorly represented in traditional …

Water Rights Accounting And Distribution In Utah, Sarah Null, Bethany Neilson, Eileen Lukens, Eryn Turney, Utah Division Of Water Rights

Watershed Sciences Faculty Publications

This white paper summarizes how the Utah Division of Water Rights (WRi) administers water rights through the coordinated processes of water distribution and accounting. Water distribution involves apportioning divertible flow in river systems by adjusting diversions and reservoir storage. To account for and distribute water effectively, WRi must first determine the amount of water available for diversion each day, then prioritize water rights when water supply is insufficient to satisfy all demands. WRi has developed specialized tools and models to support this process.

This paper was developed through a collaboration between WRi and Utah State University to produce a report …

Additive Manufacturing Of Carbons From Commodity Polyolefins, Paul Smith

Dissertations

Though tremendous progress has been made engineering carbon materials across length-scales from the molecular to the macroscopic, on-demand macro-structural control of carbons is still developing. Many carbon materials like graphene, carbon nanotubes, activated carbons, and carbon fibers have powder or fiber form factors. Recent research has pioneered on-demand carbon production through additive manufacturing (AM) via 1) extrusion and post-processing of highly filled carbon slurries, or 2) printing and pyrolysis of polymeric carbon precursors such as polyimides, acrylated polyethylene glycol, and phenolics. While groundbreaking, most methods face challenges with adoption due to costly/complex materials and manufacturing processes, and large dimensional changes …