Digital Commons Network^™

Consumptive Use Of Water Studies In The Ashley And Ferron Creek Areas Of Utah, Elden E. Fisher

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The inadequacy of water and power supplies in Utah for agriculture, for industry, for domestic and community consumption has retarded the State's economic growth. Shortages of water and hydroelectric power are the principle impediments to the full realization of other potentials of Utah, that is, the full use of its arable lands, the wide and diversified use of its industrial raw materials, and the unrestricted development of its communities. The problem of securing additional sources of water and power has resolved itself into one of major concern. The objective of this study was to determine unit values of consumptive use …

An Investigation Into The Precipitation Of Copper From Mine Water By Cupric Copper Reduction, And The Subsequent Precipitation Of Copper As Cuprous Chloride, Jack T. Gentry

Bachelors Theses and Reports, 1928 - 1970

The objective of this thesis is to determine the possibility of applying a different method to the re­covery of the copper dissolved in the Butte mine waters, and thereby precipitate a purer cement copper with greater efficiency and less iron consumption.

Problems Of The District Engineer — Technical And Otherwise, B. T. Moynahan

Kentucky's Annual Forum on Transportation

No abstract provided.

Welcoming Address [1950], Leo M. Chamberlain

Kentucky's Annual Forum on Transportation

No abstract provided.

Field Resolution Tests With The Metrogon Lens, Robert Greig Livingston

Professional Degree Theses

"The first portion of this treatise is devoted to a compilation of general knowledge concerning photographic resolution testing - an explanation of certain optical terms; the drafting of resolution targets; methods for averaging resolution values, measured at various positions on the format, to obtain one over-all value for an exposure; and a description of the factors involved in conducting the photographic operations. In the second part of the paper, analyses of the results obtained from line-target resolutions are made with the purpose of determining those combinations of aperture, filter, and shutter speed which result in high photographic resolutions. This information …

Advertising Brochure: Case W-9, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Advertising Brochure: Minneapolis-Moline Comfort Tractor, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 450: Oliver Row-Crop 88 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 441: Mccormick-Deering Wd-9, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT:

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker, point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST B: The throttle …

The Theory Of Limit Design As Applied To Column Analysis, John Francis Mccarthy

Masters Theses

"In any discussion of compression members of a structure, account has to be taken primarily of the relative "slenderness" or bending weakness of the member. If the member be so short that axial loading causes very slight deflection at any point throughout the member, it is usually designated a simple compression member and no account is taken of the additional stresses due to the deflection. When, however, the ratio of the length to the least radius of gyration of the member becomes so large that bending stresses cannot be ignored, the member is usually called a column and its consequent …

Advertising Brochure: Allis-Chalmers , Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Relative Productive Value Of Land, Karl Harris, Vaughn E. Hansen

Reports

Location, markets, hard surface roads and other transportation facilities, churches, taxes, schools, and utilities are major factors in the monetary value of land, yet these things do not contribute to the land’s productivity. In this bulletin the only factor considered in determining the agricultural value of land is its productive capacity.

The three major factors in the productive value of land are water, climate, and soil.

These three factors are the principal ones in crop production. If any one of them is unfavorable to plant growth, it can inhibit or even prevent plant growth regardless of how favorable the other …

Effects Of Wave Action Upon The Design Of The Breakwater For Istanbul Harbor, Melih Suat Durusan

Masters Theses

"The city of Istanbul is situated on the southern entrance of the Bosphorus which separates Asia from Europe; at the same time it is the only strait that leads to the Black Sea. Istanbul is the city that connects Europe-Asia highways and railways. These features show that Istanbul is a very important port. The Golden Horn and the southern end of the Bosphorus constitute a natural harbor which has been in use for many years. Although the natural harbor has served its purpose in the past, the present conditions necessitate the presence of a new harbor...One economical method of improving …

Investigation Of The Effect Of Absorption Tower Size Upon Overall Mass Transfer Coefficients, James Robert Murrell

Masters Theses

"The purpose of this research project was to obtain data and determine whether or not a correlation exists between tower size and the overall mass transfer coefficient for a packed tower. A constant ratio of tower diameter to packing diameter of twelve to one was maintained. Three absorption towers were used; a twelve inch diameter iron tower, a six inch diameter iron tower, and a three inch diameter glass tower. One inch, one-half inch, and one-fourth inch Raschig rings were used in the corresponding towers as packing. The system used was the absorption of acetone by water from an acetone-air …

Velocity Studies In A Vertical Pipe Flowing Full, Robert Franklin Tindall

Masters Theses

"The purpose of this investigation is to install a hard drawn copper pipe approximately 1/2 inch in diameter, and approximately 35 feet long in a vertical position. The copper pipe is to have pressure takeoff points at various distances along the length of the pipe. The purpose of these takeoffs is to measure the pressure of the water at the point of takeoff in the pipe. The water is to be forced into the pipe, assisted by gravity, thereby causing a pressure of some measurable quanity [sic] greater than absolute zero pressure. The discharge was to be by volumetric measurement, …

Effect Of Removed Web-Section On Critical Load For I-Beam Columns, Henri Simon Rigo

Masters Theses

"This investigation deals with a series of column tests of aluminum I-sections which have a perforated web. Specifically, the tests show that the weight is decreased without decrease in strength. Several basic assumptions are made in the design of a column. The physical action of a column is idealized in the derivation of formulae which will predict within reasonable limits the load which the member will sustain. In a given installation of non-homogeneity of material, kinks, uneven bearing, lack of symmetry due to riveting or welding, stress concentration and many other disturbing factors not in agreement with these assumptions may …

The Temperature Within A Homogeneous Plate Of Finite Thickness, Charles R. Remington

Masters Theses

"The object of this thesis is to determine by an analytical method the temperature within a homogeneous plate of finite thickness subjected to a constant temperature on one side and a periodic fluctuating temperature, expressible in a Fourier series, on the opposite side. This problem in periodic temperature changes has not, to the author's knowledge, been solved previously. The flow of heat in the problem is considered in only one direction, the x-direction. Flow in the other two directions is considered negligible, or zero. Periodic temperature changes in the earth are of importance. The temperature changes have been used by …

The Application Of The Relaxation Method To The Solution Of Steady-State Heat Transfer Through A Concentric Square Insulator, William Edward Simpkin

Masters Theses

"It is the object of this thesis to express the relationship between the heat transfer through a square insulator of variable inside-outside dimension ratios, in terms of a concentric round insulator of the same inside-outside diameter ration, by means of a continuous curve. Mathematically speaking, this thesis will have a plot of a variable coefficient, c_s, to be used...in terms of the ratio of the width of the outside square to the width of the inside square"--Statement of Problem, page 8.

The Precipitation-Runoff Relationship On The Grand River Basin Of Missouri And Iowa, J. Kent Roberts

Masters Theses

"In the study of a drainage basin which is to be utilized for water supply or water power, there is frequently a dearth or complete lack of runoff data, though precipitation data are almost always available. The Water Resources Branch of the United States Geological Survey maintains gaging stations on various streams and runoff records from these streams are available from their publications and offices. Many of these runoff records cover a considerable number of years, and are entirely sufficient for use in an analysis of any drainage basin covered by such data. Some of these gaging stations have not …

A Study Of Missouri Flint Clay, Edmond Preston Hyatt

Masters Theses

"The problem is one of attempting to explain the peculiar nature of Missouri Flint Clay and to expand the knowledge concerning it. Among the questions for which answers are sought are: What makes Missouri Flint Clay so hard? What happens to Missouri Flint Clay when it is ground? What is the mineralogical constitution of Missouri Flint clay?"--Introduction, The Problem, page 1.

Rockbursts, Christian Maurice Colson

Masters Theses

"This paper does not pretend to originality; it is an attempt to bring to light the causes and the mechanism of rockbursts, as exposed in the literature. Furthermore, an endeavor has been made to give a comprehensive picture of the prediction, prevention, and control methods of rockbursts. Briefly, what has been done in the field of rockbursts, and what remains open to investigation is submitted to the reader. The choice of rockbursts as a thesis subject appears to be justified by the geologic interest of the question. Detailed geologic observations, and particularly the recording of all the structural features which …

Analytical Investigation Of Bending Effects On The Stability Of A Tube Subjected To External Pressure, Charles Young

Masters Theses

"The behavior of thin and moderately thick-walled tubes under various types of loadings has been a major problem of several leading industries for many years. Predominant among these, and the one for which this thesis was primarily undertaken, is the oil industry. The problem attacked in this thesis, however, is not limited to that industry alone, having ample application in industries that are sub-marine in nature, or any industry in which the application of external pressures on equipment is likely to be responsible for buckling failures...In this thesis, the problem of finding the effect of bending on the collapsing pressure …

Calculations Of Maximum Sag Of A Transmission Line With An Ice Load On One Span, Rodney A. Schaefer

Masters Theses

"An important problem concerning electric power lines is the calculation of the maximum sag occurring when there is an ice load on only one span. The object of this thesis is to determine a practical method for calculating the maximum sag of a transmission line, suspended on suspension insulators, with the aforementioned loading conditions. This paper is limited to the case where the supports of the transmission line are at equal elevations and all span lengths are equal"--Introduction, page 1.

Construction And Operation Of A Vacuum Retort Pilot-Plant For Distillation Of Alloys, Robert Frederick Doelling

Masters Theses

"The widespread appearance of large scale vacuum systems operating commercially in the micron range of pressures has initiated a new field of industrial endeavor, vacuum engineering. The ever increasing number of applications of vacuo in commercial processes and laboratory research has stimulated the design and improvement of vacuum equipment, and at the present time equipment may be obtained to meet practically any need. In turn, the variety of available tools has directed the engineers attention to improving old processes and developing new ones through the utilization of vacuum techniques ... The possibility of producing a relatively high purity silver in …

Periodic Heat Flow In A Semi-Infinite Solid, Warren George Heidbrier

Masters Theses

"The object of this investigation is to determine by analytical means the temperature within a homogeneous semi-infinite solid, as a function of time, while the solid is receiving heat periodically by radiation on its one flat surface. Periodic heat flow means that heat flow is a continuous function of time and repeats itself at regular intervals. A semi-infinite solid has only one bounding plane and extends to infinity in all other directions...Much of this work deals with the soil temperatures of the earth both at the surface and at various depths. The surface of the earth is subjected to daily …

Temperature Fluctuations Within A Solid Of Finite Thickness, William Sanford Hogan

Masters Theses

"The object of this thesis is to determine by analytical methods the temperatures within a homogeneous plate of finite thickness subjected to a constant temperature on one side and a periodically fluctuating temperature on the opposite side. The heat flow in the other two directions is considered negligible in this problem. Periodic changes of temperature are frequent in nature and in engineering. The surface of the earth is heated periodically by the sun in its daily and annual cycle and the periodic temperature changes below the surface and the question to which depth these changes are appreciable were dealt with …

Experimental Studies Of The Effect Of Moisture On Strength Of Mine Roof-Shales, Rolf W. Roley

Professional Degree Theses

"The mining and production of coal by underground mining operations has long been recognized as one of this nation's most hazardous industries. Tabulated data from the State of Illinois, for example, reveal that in that State between 1882 and 1945 there have been 7,789 men killed in coal mining accidents of one form or another. Further inspection of the data indicates that 3,711 of these men were killed underground by falls of roof or rock….

As previously stated, this experiment was designed to determine whether or not any appreciable change in strength as measured by Transverse Breakage would result from …

Purification Department Of Zinc Leaching Division At Anaconda, Montana, J. L. Brown

Bachelors Theses and Reports, 1928 - 1970

The original smelter, known as the Upper Works smelter, was located on the north side of the Warm Springs Creek, just 2 miles east of the city of Anaconda and 26 miles from the city of Butte. By the year 1894 this smelter had a capacity of 500 tons of ore a day.

The Vanadium Plant Of The Anaconda Reduction Works, Tom Liss

Bachelors Theses and Reports, 1928 - 1970

No complete history of mining and smelting will ever be written that does not include a major discussion of the Butte district. The colorful tale of this area plays a major role in the interesting stories of mining. In the fields of mining methods, labor relations end financial manipulations, the Butte area has set a standard.

The Christensen Sillimanite Deposit Southeast Of Dillon, Montana, Everett O. Bracken

Bachelors Theses and Reports, 1928 - 1970

The minerals sillimanite, kyanite, andalusite, dumortierite, and topaz comprise a group of minerals whose high alumina content and physical properties are particularly desirable in the manufacture of refractory products. Sillimanite is the least plentiful of the minerals of this group, and for this reason it is not used extensively at the present time. However, it would be very desirable to the refractory industry if a suitable domestic source of supply could be established.