Digital Commons Network^™

Test 982: Ursus C-350 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Viscosity-Density Correlation Of Newtonian Liquids, Melvin Leonard Druin

Dissertations

The viscosity of monatomic liquids was modeled by an equation derived from the kinetic theory of gases. Viscosities may be calculated from data on density and molecular weight of the liquid. In adapting this relationship to polyatomic liquids, a single correction factor was developed for each of five series of homologues; n-paraffins, n-1 -alkenes, n-alkylcyclohexanes, n-alkylbenzenes and n-alcohols, to account for the deviations of the calculated viscosities from those reported, extending over a one- to three-hundred degree range. The factor is a function of reduced temperature relative to the normal boiling point, T_rB. A single equation for each …

The Mechanism Of Second Breakdown In Transistors, Eugene David Fabricius

Dissertations

The purpose of this dissertation is to examine the behavior of electrons and holes in a semiconductor or diode under conditions of high current density as a function of temperature, and to relate this behavior to the phenomenon of Second Breakdown. The approach used is that of magnetohydrodynamics, the electrons and holes being treated as a plasma "gas" embedded in the dielectric of the semiconductor.

This approach is unique in the following respects:

1. This is the first attempt to explain second breakdown in terms of magnetohydrodynamics.
2. This is the first time an explanation of pinching in a solid at room …

The Generalized Virial Equation Of State, Ghanshyam R. Patel

Dissertations

A generalized three parameter virial equation of state has been developed and tested for seven pure gases having different molecular characteristics. The equation has also been tested for more than thirteen binary gas mixtures using three different mixture rules. The final equation is as follows:

Z = 1 + B(T)/V + C(T)/V² + D(T)/V³ + E(T)/V⁴ + VF(T)/e^aV + VG(T)/e^bV

The expressions for E(T), F(T), and G(T) along the critical isotherm were derived in terms of critical properties and two constants, a and b which appear in the sixth and seventh terms in the above …

Realization Of Transfer Impedances Using Distributed Rc Elements In A Common Ground Linvill Configuration, Walter Woronka

Theses

One of several synthesis procedures available for the realization of a transfer admittance is that of Linvill. This synthesis procedure employs an active element, a negative impedance converter (NIC), to shift the poles of passive immittance functions from the negative real axis into the complex plane to realize the desired transfer immittance function.

The Linvill synthesis procedure is extended to networks containing cascaded distributed RC elements and the conditions which must be satisfied to realize a transfer impedance using these distributed elements are defined.

Test 980: Minneapolis-Moline G900 Gasoline (Also G950 Gasoline), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 978: Minneapolis-Moline G900 Diesel (Also G950 Diesel 10-Speed), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 979: Minneapolis-Moline G900 Lpg (Also G950 Lpg), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

The Development Of An Instrument For Three Dimensional Analysis Of Micron Quantities Of Tooth Movement, M. Clark Lamberton

Loma Linda University Electronic Theses, Dissertations & Projects

In order to quantitate initial tooth movement in response to forces applied to the tooth crown, an instrument for intraoral use has been developed. The photomicrometer consists of nine photosensitive cells mounted in an assembly of two layers. Eight of the cells were mounted to form X and Y axes, top layer and bottom layer, to measure horizontal movements. The ninth cell was mounted in the center of the bottom layer and was used for alignment and for measurements in the Z or vertical axis. The photocell assembly was approximately 10 mm diameter and 6 mm high. This assembly when …

X-Ray Irradiation Studies Of Lybian Desert Glass And Sand, Magdi M. Nasrallah

Archived Theses and Dissertations

No abstract provided.

Noise Spectral Density As A Diagnostic Tool For Reliability Of P-N Junctions, Young Duck Kim

Dissertations

The feasibility of choosing noise-voltage spectral density as a prediction parameter for the degradation of p-n junctions has been examined both theoretically and through a series of life-tests.

Experimental facts show that the noise-voltage spectral density, S_v(w), observed in a p-n junction under the breakdown condition tends to be "white" (which contradicts the 1/f-noise theory), and S_v(w) is inversely proportional to the breakdown current (which contradicts the shot-noise theory). Furthermore, some p-n junctions display one or more multiple peaks of S_v(w) at different current levels which can not be explained by any of the …

Reliability Considerations For Communication Satellites, Frank Polizzi

Theses

A detailed program covering all phases of reliability for a communication satellite was presented. In long mission programs such as this one, reliability is the prime consideration in assuring a successful accomplishment of the stringent goals set forth. Reliability principles and methods were incorporated in delineating each major task in the program. These principles and methods not only aided the reliability personnel in performing their duties better, but also assisted the design group, manufacturing personnel, and the testing and evaluation group in performing their jobs efficiently by being aware and knowledgeable of reliability engineering.

Various reliability disciplines were imposed, as …

A Study Of The Properties Of The Biconical Antenna, Kurt Frank Hafner Jr.

Theses

Expressions are found for the fields produced by TM and TEM modes along a finitely conducting biconical antenna. Expressions are also found for the TM and TEM fileds along a biconical antenna having a lossy dielectric coating. It is shown that the antenna losses produce an anntenuation of the the fields along the antenna. It is found that because there is a dispersion of the fields along the biconical antenna, the attenuation produced by the losses is, in genaral, not characterized by simple exponential.

A solution is obtained for the fields of the TEM wave along a biconical antenna coated …

Test 977: David Brown Selectamatic 990 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 976: David Brown Selectamatic 1200 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 975: Minneapolis-Moline G1000 Vista (Lpg), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 974: Minneapolis-Moline G1000 Vista (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 973: Ford 8000 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Streamflow Forecasting For The Logan And Blacksmith Fork Rivers In Northern Utah, Kenneth A. Mangelson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Accurate streamflow forecasts have been recognized as being important by water users and others whose occupations and pursuits depend upon the supply of water from snow fed streams.

The streamflow forecasting equations for the important predictive periods, in particular the April through September and the May through September total flows, were developed in this study for both the Logan and Blacksmith Fork Rivers.

Multiple linear regress ion was used as a mathematical model in determining the streamflow forecasting equations. A correlation analysis was used to determine the importance of the variables used in the mathematical model. The results of this …

Irrigation Demand In The Utah Lake Drainage Area The Role Of Irrigation Efficiency, Hiro Mizue

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The effect of irrigation efficiency upon the water demand for agricultural purposes in the Utah Lake drainage area has been evaluated in this study . Irrigation demand is the quantity of water at the supply source necessary to satisfy crop water requirements, taking into account irrigation efficiency.

The Utah Lake drainage area was divided into hydrologic subareas and districts to facilitate analysis. The demand, surplus, and deficit quantities for each area was determined. The computations were made using constant mean quantities. Within a given area, the diverted water was assumed to be applied uniformly to satisfy agricultural crop demands, and …

Transition From Laminar To Turbulent Flow For Dilute Guar Gum Solutions, Martin L. Palmer

Theses and Dissertations

Solutions of many natural and synthetic polymers have been found to reduce turbulent friction losses in flow through pipes. The basic mechanism causing these reductions is not entirely understood although two general theories have been advanced.

Study Of Sheltered Evaporation In Colombia, Guillermo Pardo-Bonilla

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Equations, tables, and graphs for estimating evaporation from sheltered evaporimeters were developed, based on data from 20 stations in Colombia.

Computer programs and plottings were the basic tools to work out the equations. The form of the simplified final equation is

Ev = kC_VPDC_T

in which

• Ev is the evaporation in millimeters per day
• K is a constant
• C_VPD is the vapor pressure deficit coefficient
• C_T is the temperature coefficient

Statistical parameters were determined to compare the measured evaporation with the Christiansen-Guillen formula and the newly developed formulas.

A Similarity Model For Flow In A Turbulent Boundary Layer, Earl Clark Lemmon

Theses and Dissertations

One of the basic goals in engineering is to generate models which will provide a means for analytically predicting observed phenomenon. Such a model is often modified several times to obtain better results. The purpose of this study was to generate a model for an equilibrium turbulent boundary layer for steady flow over a flat plate and compare the results obtained by using the model with experimental data. Part of the objective was to also suggest ways in which the model could be modified to obtain better results.

Test 972: Oliver 1950-T Diesel 4wd, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 970: International Farmall 856 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 971: International Farmall 1256 Turbo (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Structural Behavior Of Small-Scale Steel Models, William A. Litle, David C. Foster, Duke Oakes, Philip A. Falcone, Richard B. Reimer

CCFSS Library (1939 - present)

No abstract provided.

West Midlands Development : Erosion Prevention And Control, G W. Spencer

Journal of the Department of Agriculture, Western Australia, Series 4

THE prevention of soil erosion is essentially a matter of using each soil according to its potential, and treating it according to its needs.

Good land use and sound management practices are the best preventive measures.

West Midlands Development : Development Techniques, Department Of Agriculture, Western Australia

Journal of the Department of Agriculture, Western Australia, Series 4

Most clearing in the West Midlands is carried out by chaining, though the method chosen will depend on the country being cleared and on the resources of the farmer.

Concrete In Dairies, D Roger Buchanan

Journal of the Department of Agriculture, Western Australia, Series 4

PRIME requirements for exposed concrete surfaces in dairies are that they should be easily cleansed and should not deteriorate in contact with milk and milk products.

In milking stalls, animal races and on loading platforms hardwearing surfaces which offer good foothold are also necessary.