Digital Commons Network^™

Calculation Of Optimum Conditions For Simultaneous Heat And Mass Transfer In Porous Membranes, Chia-Chang Liu

Masters Theses

"The object of this investigation was to study desalination using evaporation through porous membranes and to estimate the economic potential of the method. The major factors affecting the economics were: 1. The saline water temperature into the evaporator, t_sl; 2. the temperature driving force in the evaporator, DF; 3. the temperature driving force in the heat exchanger, DTEX; and 4. the saline water temperature leaving the evaporator, t_s2. The optimum conditions based on cost of water product were studied by calculating water costs under a wide range of conditions. for any given set of variables t …

Application Of Approximate Transmission Matrices To Describe Transverse Beam Vibrations, Ranjit Kumar Roy

Masters Theses

"This paper is a report of an investigation of an approximate method for finding the principal mode frequency roots for beams in transverse vibration. The method utilizes approximate transmission matrices obtained by a power series expansion of the basic differential equation which governs the transmission matrix. Investigation has been carried out to examine the efficiency of the method in producing the first several normal mode frequency roots. This has been achieved by applying the method to several uniform and non-uniform beams and comparing the results with the exact solutions. The technique has further been applied to non-uniform beams of tapered …

Analysis Of Small Water Management Structures In Irrigation Distribution Systems, Gaylord V. Skogerboe, Wynn R. Walker, Brent B. Hacking, Lloyd H. Austin

Reports

The Irrigation and Drainage Research Conference conducted at Utah State University (ASCE, 1964) delineated many of the research needs regarding “Small Low- Cost Hydraulic Structures for Conveyance and Distribution Systems,” which was one of the six topics considered at the conference. In discussing possibilities for accomplishing the recommended research, it was suggested by some panel members that a considerable portion of the work could be undertaken by graduate students, particularly at the Master of Science level. The intent of this report has been to sort through the large volume of literature in an attempt to define the specific research needs …

Formulation Of A Mathematical Model For The Allocation Of Colorado River Waters In Utah, Rick L. Gold, James H. Milligan, Calvin G. Clyde

Reports

A Mathematical model for the allocation of Utah’s water resources is formulated in the linear programming format. The availability of water from various sources is considered with the demands for water in each of the nine hydrologic study areas of Utah. The applications of mathematical models of this type are studied and the merits of the linear programming approach are discussed.

Simulation Of The Hydrologic-Economic Flow System In An Agricultural Area, Murland R. Packer, J. Paul Riley, Harold H. Hiskey, Eugene K. Israelsen

Reports

Like the allocation of water resources among water users, the distribution of allocated water to the subusers requires an estimate of the economic costs and benefits from a number of distribution alternatives. The most satisfactory solution maximizes the benefit cost ratio. This study is based on the premise that equitable water distribution to agricultural subusers can be more easily accomplished through the use of a technique to predict the marginal value of agricultural water. A hydro-economic model is formulated to distribute the water supply to the crops and to determine the unit value of water for the given supply. By …

Mass And Heat Transfer Through Nonwettable Porous Membranes, Chung-Liang Yeh

Doctoral Dissertations

"Evaporation of water through nonwettable porous membranes has been studied under various pressures with various membrane thicknesses. The results of previous investigations at 1 atmosphere have been correlated into one equation for mass transfer resistance which has also been found to fit approximately new data obtained of 1.5, 2, and 3 atmospheres in this investigation. In the new data fluxes varied from 0.064 to 0.691 lb./ft.²/hr. through glass fiber-Teflon membrane from 0.02 to 0.08 inch in thickness. Temperatures ranged for 80 to 260°F. A more theoretical equation has been developed to explain variations from the equations based on 1 atmosphere …

Basic Design Of Mosfet, Four-Phase, Digital Integrated Circuits, Earl Morris Worstell

Masters Theses

"MOSFET is defined as metal oxide semiconductor field-effect transistor. The integrated circuit design relates strictly to logic and switching circuits rather than linear circuits. The design of MOS circuits is primarily one of charge and discharge of stray capacitance through MOSFETS used as switches and active loads. To better take advantage of the possibilities of MOS technology, four-phase (4[phi]) circuitry is developed. It offers higher speeds and lower power while permitting higher circuit density than does static or two-phase (2[phi]) logic. Equations are developed that apply directly to the design of four-phase logic along with examples of circuitry that show …

Mass And Heat Transfer Relations In Evaporation Through Porous Membranes, Marshall E. Findley, V. V. Tanna, Y. B. Rao, C. L. Yeh

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study concerns rates of evaporation and mass transfer of water vapor from a heated salt solution through a water repellent porous membrane to a cooled water condensate. This transfer is a result of temperature differences and corresponding vapor pressure differences across the membrane. Three groups of experiments were carried out which indicate that the major factor influencing the rates of transfer is diffusion through a stagnant gas in the membrane pores. However, an equation considering film heat transfer coefficients, membrane thermal conductivity, and an empirical correction based on temperature driving force appears to be necessary for representing all the …

A Simple Observational Technique For The Investigation Of Boundary Layer Stability And Turbulence, Tony Maxworthy

Symposia on Turbulence in Liquids

A dense suspension of aluminum flakes in a fluid has many advantages as a flow-visualization method, and has been used to study circular Couette flow and Benard instability, among others. In the present contribution the scientific and pedagogical merits of the technique are examined further for three different cases: (a) Stability of Poiseuille flow; (b) Stability of the side-wall boundary layers created when a fluid-filLed, rotating container is suddenly brought to rest; (b) Stability of the boundary layer beneath a concentrated vortex.

The technique is also useful in other cases, especially when fundamentals of fluid flow are to be demonstrated …

Flow In Aggregate-Binder Mixes, Egons Tons

JTRP Technical Reports

No abstract provided.

Activity-Accessibility Models Of Trip Generation : Progress Report, Tamman Zaki Nakkash

JTRP Technical Reports

No abstract provided.

Accident Analysis At Railroad-Highway Grade Crossings In Urban Areas: Technical Paper, William D. Berg, Joseph C. Oppenlander

JTRP Technical Reports

No abstract provided.

The Gcars System Fortran Iv Users Manual, Part 2, A. Keith Turner

JTRP Technical Reports

No abstract provided.

A Study Of Pavement Strains And Deflections Produced By Dynamic Time Forces : Progress Report, Svein Olaf Engenes

JTRP Technical Reports

No abstract provided.

Plan Design Model For Urban Area Use Allocations : Draft Copy, W. Don Stewart, William Louise Grecco

JTRP Technical Reports

No abstract provided.

Effect Of Axial Mixing In Gas Absorption, Sundareswaran Parameswaran Iyer

Masters Theses

"The effect of axial mixing in the liquid phase on the performance of a gas absorption column was studied using the experimental data of Michael Brittan for the carbon dioxide and water system. In this study, piston flow conditions were assumed for the gas phase. A one-parameter mathematical model, which characterized the flow regimes in both the gas and the liquid phases undergoing plug flow conditions, was first curve fitted for its unknown parameter (i.e. the Number of Transfer Units) by a non-linear regression analysis procedure. The "AAPD" (i.e. the Average Absolute Percentage Deviation between the predicted value of the …

Methods For Evaluating The Performance Of Small Acoustic Filters, William S. Gatley, Raymond Cohen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Experimental methods are needed for determining the characteristics of small acoustic filters used in systems with pulsating gas flows. These characteristics could then be used to predict the performance of proposed filter designs in a particular system, according to plane wave acoustic theory. Dependence on trial-and-error experimentation in solving noise control problems would thus be minimized. A literature survey revealed only a few earlier attempts to evaluate the acoustic performance of small filters and filter elements. Three methods for determining reflection and transmission factors are described, evaluated, and compared. A method employing a standing wave tube of unique design is …

Diffusion Of Iron And Cobalt In Nickel Single Crystals, Charles Frederick Heuer

Doctoral Dissertations

"Diffusion coefficients of iron-59 in nickel have been determined in the temperature range 815°C to 1200°C. The temperature dependence can be represented by an Arrhenius type relationship,...The effect of the isotopic mass on the diffusion coefficient of cobalt in nickel has also been investigated. The isotope effect parameter, E, was found to vary from .26 to .84 over the temperature range 970.5°C to 1200°C. Both results are consistent with the single vacancy mechanism of diffusion. No evidence of divacancy contributions to the mass transport has been found"--Abstract, Page i.

Calorimetry Of Room Temperature Deformed Copper, George Juri Filatovs

Doctoral Dissertations

"An adiabatic anisothermal differential calorimeter for the study of room temperature deformed 99.999% pure copper has been constructed. An annealed and a deformed specimen were heated at a constant rate in adiabatic surroundings and the differences in energy released between samples was obtained. The control circuits were automatic. Deformation was by elongation ranging from 12 to 40%, and the corresponding energy found was from 1.9 to 5.3 calories/gram-atom. No recovery energy was found. The results obtained generally agree with published results and, in particular, verify Gordon's isothermal annealing results. It is proposed that the criteria for the presence of recovery …

Models For The Pn Diode And The Npn And Pnp Transistor For Use In Computer Aided Design And Analysis Programs, Glenn Ronald Case

Doctoral Dissertations

"This work is concerned with the problem of developing suitable mathematical representations for the pn junction diode and npn and pnp transistors for use in computer aided design and analysis programs. The Ebers-Moll model as used in the Net-1 program has been considerably improved, particularly regarding base resistance prediction, prediction of high forward current behavior, and the addition of reverse breakdown terms. The resulting models show substantial improvement in representation of d-c and transient characteristics. Some improvement in a-c characteristics has also been obtained. Methods of obtaining parameters for the new model and several of the present models, given measured …

Analog Simulation Of Mass Transfer In Droplets With Turbulent Internal Circulation, Jeffrey Tsai-Hwa Kuo

Masters Theses

"The object of this thesis is to simulate the Handlos and Baron Model for mass transfer into droplets by using an iterative analog computer in order to obtain eigenvalue and other parameters in a series solution. The eigenvalues λ_n calculated in this work are compared with the results obtained by Wellek-Skelland using a variational technique and by Patel using numerical approaches on the digital computer. From the analytical series solution, one can calculate the fraction of solute extracted in the droplets as a function of droplet contact time. PACTOLUS, a digital-analog simulator, provides a check on the validity of …

An Investigation Of The Application Of Photoelastic Coatings To Soil Studies, James Kenneth Meisenheimer

Masters Theses

"The purpose of this investigation was to determine if photoelastic coatings could be adapted to soil systems and used as a workable tool for analyzing deformation and stress distribution. The required physical properties of a photoelastic coating on soil is discussed and a number of photoelastic materials are investigated as possible soil coatings. Mixing procedures, coating application techniques, curing methods, testing procedures, and results are discussed for gelatin and several plastics. Compacted soil samples and extruded soil samples from a Vac-Aire extrusion device were coated with reflective and photoelastic coatings and then loaded in an unconfined compression machine. The stress …

Current Characteristics Of Electrically Sprayed Glycerine, Larry Eugene Stoddard

Masters Theses

"The current carried by electrically-sprayed glycerine was measured, and an empirical relation was obtained for single-jet spraying, given by I = K_IV^0.45M^0.55̇d^-0.18 where V is the electrode voltage, Ṁ the mass-flow rate, and d the electrode spacing, the electrodes being a capillary and collecting plate. Peculiarities of the current waveform, including an exponentially rising envelope, for unstable-jet spraying and multiple-jet spraying, were recorded"--Abstract, page ii.

A Flood Frequency Study For Small Watersheds In Missouri, Ronald Anthony Rusch

Masters Theses

"The quantity and quality of streamflow data available on small watersheds in Missouri has improved in the last ten years. However, it will be years before there is sufficient data on both the large and small watersheds to enable investigators to conduct extensive studies in the state. This study of 70 small watersheds within the state of Missouri presents a technique to estimate the discharge from watershed of 25 square miles or less...Results from this study may be used in the design of small hydraulic structures such as culverts, bridges, and dams for small reservoirs"--Abstract, page ii.

Investigation Of Target Detection In Noncoherent Systems With Colored Noise, Edward Windsor Bailey

Masters Theses

"Design efforts concerning the problem of detecting moving ground targets from an airborne platform with a noncoherent radar have been concentrated in the area of video filter design. The filter formulation generally follows an empirical path with no generally acceptable criterion for an optimum processor. This Thesis considers several problem formulations which are based on a Neyman-Pearson detection criteria. A square-law second detector is assumed and the resulting likelihood ratio shown to be too complex for closed form solution. The problem is reformulated in terms of sequences using complex random variable representations and the likelihood ratio is investigated. A test …

Stochastic Simulations Analysis And Determination Of Iteration Requirements, James Walter Smith

Masters Theses

"A thorough analysis of computerized stochastic simulation problems has been undertaken to determine the number of iterations (or random draws) necessary to achieve a required degree of output accuracy. The basic problem is to determine when the sampled output mean and standard deviation are within specified accuracy limits. An error analysis is made of the statistical properties of deterministic-probablistic [sic] and logic (random walk) type problems. A recommendation for determining the number of problem iterations required is then presented"--Abstract, page ii.

Failure Analysis Of Binary Address Decoders, Kanaiyalal Jekisondas Gandhi

Masters Theses

"This paper describes the organization and failure analysis of various types of binary address decoders. Logical type faults are considered and all possible faulty output patterns, resulting from these faults, are derived. A basic theory is developed, showing that these failure patterns are independent of the decoder size and organization. Digital simulation programs were used as an aid in the development of this theory. Results of the simulation are provided in the appendix"--Abstract, page ii.

Fault Diagnosis Of Sequential Circuits, Virgil Willis Hughes

Masters Theses

"Compared to the problem of combinational network (CN) diagnosis, that of sequential network (SN) diagnosis has been an extremely difficult one. Present techniques of SN diagnosis are difficult to apply, and generally lead to lengthy test schedules or additional logic. This paper presents a new approach to the SN diagnostic problem which results in a substantially simpler technique than those found in the literature. The approach is to modify the SN so that it can be diagnosed from a combinatoric point of view. This is accomplished by the addition of outputs for testing purposes to certain lines in the circuit--no …

A Theoretical Study On The Interpretation Of Resistivity Sounding Data Measured By The Wenner Electrode System, Siew Hung Chan

Doctoral Dissertations

"This thesis deals with a theoretical study on the interpretation of resistivity sounding data measured by the Wenner electrode system. The objectives of this investigation are twofold: (i) to derive from the apparent resistivity data some suitable functions from which the resistivity and thickness of each member of the sequence of layers composing the earth may be determined, and (ii) to devise suitable methods for analyzing the resulting functions. In this investigation it is shown that the solution of the boundary value problem associated with an n-layered earth model leads to an integral equation for the Wenner electrode system. This …

Numerical Simulation Of Pressures In A Radical System, Vijender Nath Gopal

Masters Theses

"The time-space location of an advancing front has been described in such a manner as to permit the calculation of frontal pressures when a heterogeneous (in permeability) radial system is subjected to water encroachment. A finite difference application has been developed to calculate these pressures at specified radial distances from the injection or production wellbore. These pressure have been further utilized to predict the pressures at the advancing front for different time intervals"--Abstract, page iii.