Digital Commons Network^™

Operational Characteristics Of Lane Drops, Don L. Cornette

Kentucky Transportation Center Research Report

A lane drop is defined as a location on a highway where the number of lanes provided for through traffic decreases. For purposes of this study, the broad category of lane drops has been further subdivided into three specific classes: lane exits, lane splits, and lane terminations. These subdivisions are illustrated schematically in Figure 1. A lane exit refers to a location where the number of through lanes decreases at an interchange on a multilane roadway. A designation of lane split denotes a major fork of a multilane highway where the level of traffic service provided at the terminus of …

The Oxidation Of Carbon Monoxide By Magnesium Aluminate, James A. Whelan

Dissertations

In this research the catalytic oxidation of carbon monoxide was investigated on magnesium aluminate catalysts, MgO:xAl₂O₃, with five different compositions, x, ranging from 1.0 to 3.0. The reaction was run at temperatures ranging from 500 to 600 °C. with radioactive carbon monoxide as the tracer. An experimental technique has been devised for the analysis of unreacted CO which takes into account a correction for the solubility of CO in CO₂.

Four mathematical models were postulated to explain the mechanism of reaction. The models were examined against experimental data by means of non-linear least squares …

A Time Domain Deconvulution Technique For The Correction Of Transient Measurements., Larry Wayne Bickle

Mechanical Engineering ETDs

Techniques for correcting transient measurements can be considered as "deconvolving" or solving the convolution integral equation

R(t)=F(0) * C(t) + ∫t_0 C(t- Τ) [dF(T)/dT] dT

for the input, F(t), given the response, R(t), and response of the measurement system to a step input of unit magnitude, C(t). Because the deconvolution process is mathematically ill conditioned, it is usually necessary to place additional constraints on the functions F(t), C(t) and/or R(t).

In this paper, a numerical time domain deconvolution

(TDD) technique that provides physical insight into the problems of correcting transient measurements is presented and compared to techniques that have previously …

Analysis Of Water Reuse Alternatives In An Integrated Urban And Agricultural Area, A. Bruce Bishop, David W. Hendricks

Reports

Intoduction

The growing demands on our existing water supplies and the current problems of water shortage emphasize the need for a comprehensive approach to analysis and planning of water reuse. The primary focus, heretofore, has been on the treatment technology for achieving water reuse.

The concept of reuse, however, should be broadened to consider a totally integrated urban and agricultural system. This necessitates a systems analysis where water reuse, together with all other water dispositions, is considered in the context of its contribution to the total water resources pool of a region.

The components of the water resource system are …

The Analysis And Behavior Of Thin-Steel Hyperbolic Paraboloid Shells, Peter Gergely, P. V. Banavalkar, J. E. Parker

CCFSS Library (1939 - present)

An extensive experimental and analytical investigation of thin-steel hyperbolic paraboloid (hypar) structures was carried out to provide design information. As a result of this work, empirical data is provided regarding the behavior of such structures and computer programs are presented for the analysis of thin steel hypar structures. Hyperbolic paraboloid structures possess a unique combination of structural and architectural properties; some of them are the following: 1) Due to the double curvature of the surface the internal stresses in the deck are generally low and the deflections are small. 2) Since a hypar surface can be generated by straight lines, …

Agitation Of Dilatant Fluids, Vijay Jang Datta

Theses

No abstract provided.

Combined Thermal Weakening And Mechanical Disintegration Of Hard Rock, George Bromley Clark, T. F. Lehnhoff, Gary F. Fenton, M. R. Patel, Jaw K. Wang, Vernon Dale Allen

Mining Engineering Faculty Research & Creative Works

This investigation of the combined effects of thermal weakening and mechanical disintegration (thermomechanical fragmentation) was initiated with a view toward better understanding of the processes required for more rapidly and economically fragmenting or excavating hard rock. Boring machines for utility tunnels, transportation tunnels or mining operations may be able to utilize the advantages of processes such as thermomechanical fragmentation. Secondary fragmentation or rock crushing processes also can conceivably employ the data obtained from this study.

Cold-Formed Folded Plate Structures, Wilbur C. Schoeller, Richard H. J. Pian, Harry R. Lundgren

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

A Review Of The Effective Width Formula, N. C. Lind, M. K. Ravindra, J. Power

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Impact Loading Of Thin-Walled Columns, Nishikant R. Vaidya, Charles G. Culver

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Shock Loading Of Thin Compression Elements, Charles G. Culver, Richard Van Tassel

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Response Of Thin-Walled Beams To Impact Loading, Charles G. Culver, Edward A. Zononi, Arthur H. Osgood

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Impact Loading Of Thin-Walled Beams, Edward A. Zanoni, Charles G. Culver

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Strength And Stiffness Of Steel Deck Shear Diaphragms, Duane S. Ellifritt, Larry D. Luttrell

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Behavior Of Channel And Z-Section Beams Braced By Diaphragms, N. Celebi, T. Pekoz, G. Winter

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Shear Diaphragms With Lightweight Concrete Fill, Larry D. Luttrell

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Preface, Introduction And Keynote Address, George Winter

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

13th Annual Rocky Mountain Spectroscopy Conference

Rocky Mountain Conference on Magnetic Resonance

Program and abstracts from the 13th annual meeting of the Rocky Mountain Spectroscopy Conference, hosted by the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Denver, Colorado, August 9-10, 1971.

Mechanical Testing Of Small, Clear Timber, Paul V. Mcclannahan

Graduate Research Papers

The purposes of the research project were:

1. To investigate the technological methods employed in mechanical testing of small clear timber.

2. To discover the uses, importance, and need for mechanical testing within the wood industry.

3. To experiment with the construction and development of various types of testing equipment similar to that being used by industry.

4. To explore the possibility of adapting mechanical testing of wood samples to the junior or senior high industrial arts wood laboratory

Mechanical Lettering Devices For Drafting, Wilson G. Forbes

Graduate Research Papers

Having taught mechanical drawing in high school, grades nine through twelve for nearly six years this writer has stressed the importance of lettering to students many times. However, freehand lettering is a very short unit, with limited experience using a Leroy Lettering Guide. The desire to discover other means of lettering drawings prompted the selection of this topic.

Production Of A Video Tape Recorded Supplement For Use In Teaching Electrical Tuned Circuit Theory, William A. Carlson

All Master's Theses

This paper presents a sample of the proceedures utilized to produce a video tape recorded suppliment for use in teaching electrical tuned circuit theory. It is designed so that it could be used as a ready reference for anyone desiring to make a video tape recorded teaching aid. A recomendation is that, with the advent of the simplified video tape recorder, every teacher should become as practiced in its operation and utilization as he now is with the film projector.

Influence Of Recreational Areas On The Functional Service Of Highways, Jerry G. Pigman

Kentucky Transportation Center Research Report

Development of outdoor recreational facilities in Kentucky has generally been in predominately rural areas. Access to these areas from the primary highway network is often provided by existing low-standard local roads. The recreational travel demand often exceeds the design volumes of these local roads or the volumes that can be accommodated at reasonable levels of service. Such travel demand also constitutes a significant portion of the total demand on the rural primary network, particularly during the peak weekend periods.

Many large reservoirs in Kentucky have generated extensive developments of recreational facilities in the surrounding areas. Highways which have been displaced …

A Study Of Dr. Donald Maley's Theory -- "Research And Experimentation In Industrial Arts", John Edward Ferree

Graduate Research Papers

The problem of this study is to make a thorough examination of Dr. Donald Maley's theory -- "Research and Experimentation in Industrial Arts in the Junior or Senior High School."

Perhaps now in 1968, more than ever, concern for what is in store for industrial arts is, or should be, considered more "grave" than expressed in the above quote of Dr. Maley in 1959. Certainly now it could generally be agreed that all theories concerning the future path of industrial arts, of which Dr. Maley's Research and Experimentation theory is one, deserve a full measure of study and evaluation by …

Centering In Parallel Channel Systems, Allen Katz

Dissertations

Several types of signal processing systems in which the signal flows along parallel channels in a fashion similar to the auditory system have been investigated. The effect of excitation with signals containing both single and multiple spectral peaks (formants) was considered. In particular, the effect of nonlinear interaction between channels, referred to as centering, in the presence of noise was studied.

These systems were investigated for their value, both as information processing networks and as models of the auditory system.

The analysis indicates that parallel channel systems, in general, exhibit excellent performance in the presence of noise, and that a …

A Simulation Model Capable Of Performing The Calculations Involved In Defining A Crude Preheat Train, Robert G. Parker

Theses

A simulation model has been developed for a system of ex changers to preheat the feed to a crude distillation unit. In conjunction, a Fortran program for the performance of the model calculations by digital computer was written. Two types of preheat system were simulated, a single train system and a split (or parallel) train system. A number of features were included in the program for flexibility and versatility. A particular effort was made to have the model represent as economical a preheat system as possible.

The model program was used to obtain computer-calculated results for both single-train and split-train …

Computer Model For Reactor Design Of An Ethane Cracking Unit, Derek J. Lough

Theses

The purpose of this thesis is to develop a Fortran [sic] Computer Program to model the radiation section of a pyrolysis tube reactor designed for cracking 100 percent ethane feed. The model calculates the length of the tubular reactor required to obtain a specified ethane conversion or the ethane conversion for a specified reactor length. The resulting solution yields a conversion profile, a temperature profile, and the reactor residence time as a function of tube length. From this data it can be determined if the design is adequate and lies within the reactor model's constraints.

Umr Journal: Alaska -- Its Mineral Potentials And Environmental Challenges, University Of Missouri--Rolla

UMR Journal -- V. H. McNutt Colloquium Series

No abstract provided.

Arctic Ecology: A Decade Of Experience, John F. Schindler

UMR Journal -- V. H. McNutt Colloquium Series

A quick glance at the title of this presentation and the reader braces himself for another antipollution or “save-the-sod” type of discourse that has become so popular these days. I do not wish to detract from the importance or the need for such efforts but I would like to address myself to the the broader meaning of the term.

Ecology--the word comes from the Greek root “oikos” which means house or household. What I’d like to do is to tell you about this “house” I’ve been living in for the past 10 years.

The Environmental Challenges Facing Taps, A. V. Cardin

UMR Journal -- V. H. McNutt Colloquium Series

Before the potential benefits of the recent oil discoveries on the North Slope of Alaska can be realized, the oil must be transported to refining and marketing areas. The Alyeska Pipeline Service Company has the responsibility for the first step in this transportation—to design and construct the Trans Alaska Pipeline System. We will pipe the oil from the discovery areas near Prudhoe Bay to an ice-free, deep-sea tanker loading terminal at Valdez of the South Coast of Alaska. From Valdez the oil will be transported to the West Coast by tankers. This is the most feasible system of a number …

The Environmental Challenges Of Alaskan Mineral Development, Earl T. Hayes

UMR Journal -- V. H. McNutt Colloquium Series

To meet the challenges and to develop Alaska as a source of mineral and fuel resources that are essential to all of us, we must conduct the research and planning necessary to see that the environment is not abused. We cannot allow ourselves the luxury of thinking that we alone know what is best for Alaska. We must strive for cooperation -- cooperation between government and industry; between Federal and State governments; between the doer and the dreamer; and between the engineer and the ecologist. Remember, the quality of what we do today will determine the quality of Alaska in …