Digital Commons Network^™

Environmental Engineers Develop Solutions To Problems Of Planetary Health: The Legacy Of Professor P. Aarne Vesilind, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The principal ethical obligation of the engineering profession, to "hold paramount the health, safety, and welfare of the public," has been challenged for decades. Professor P. Aarne Vesilind identified two primary deficiencies: an anthropocentric bias that values nature only instrumentally and the use of non-mandatory, aspirational language for environmental protection, which resulted in the exclusion of enforceable environmental canons. This paper argues that two recent developments provide a comprehensive response to Vesilind's recommendations for engineering ethics. First, the United States Bureau of Labor Statistics has redefined environmental engineering as "developing solutions to problems of planetary health." Second, Oerther proposed a …

Proactive Safety Reasoning In Human-Robot Collaboration In Disassembly Through Llm-Augmented Stpa And Fmea, Morteza Jalali Alenjareghi, Fardin Ghorbani, Samira Keivanpour, Yuvin Adnarain Chinniah, Sabrina Jocelyn

Études primaires

Disassembly tasks in human–robot collaboration (HRC) environments present safety challenges due to hazardous materials, control system variability, and physically demanding operator tasks. To address these challenges, we propose an AI-augmented risk assessment framework integrating System-Theoretic Process Analysis (STPA) and Failure Mode and Effects Analysis (FMEA). This framework is implemented in four configurations: Term Frequency– Inverse Document Frequency (TF-IDF), Fine-tuned Large Language Models (LLMs), Retrieval-Augmented Generation (RAG), and RAG with a structured Knowledge Graph (KG) built from safety standards. The system supports real-time, standards-compliant safety reasoning by generating interpretable, context-specific recommendations. We evaluate these configurations across GPT-3.5 TURBO, GPT-4o, GPT-4.1, and …

Workshop Outcomes Report: 2nd International Workshop On Seismic Resilience Of Arctic Infrastructure And Social Systems, Majid Ghayoomi, Daniela Morganti

Faculty Publications

The report provides an overview of the second international workshop on Seismic Resilience of Arctic Infrastructure and Social Systems. The report discusses agenda, workshop activities, interdisciplinary working groups, and results. It ends with several strategic questions and investigation plans that were developed as part of the workshop activities.

Development And Validation Of A Multi-Output Neural Network-Based Virtual Temperature Sensor For Electric Vehicle Thermal Management, Dalton Michael Wiggins

Graduate Theses, Dissertations, and Problem Reports (ETD)

Battery electric vehicles (BEVs) rely on accurate thermal management to ensure component performance, efficiency, safety, and long-term durability. Critical propulsion system components, including electric motors and high-voltage battery packs, are commonly monitored using physical temperature sensors. However, these sensors increase system cost, introduce additional hardware complexity, and may be impractical for directly measuring temperatures at critical internal locations. Virtual temperature sensors (VTSs) provide a software-based alternative by estimating component temperatures using readily available vehicle operating data.

This research presents the development and validation of a long short-term memory (LSTM) neural network-based virtual temperature sensor capable of simultaneously estimating the motor …

Multiphysics Modeling Of Microwave-Assisted Calcination Of Soec Perovskite Precursors, Hongwei Liu

Graduate Theses, Dissertations, and Problem Reports (ETD)

The calcination of precursor powders is a critical step in the synthesis of solid oxide electrolysis cells (SOECs), where phase purity and microstructural control directly influence electrochemical performance. Conventional calcination methods are energy-intensive and time-consuming, often requiring prolonged high-temperature processing. In this thesis, microwave-assisted calcination is investigated as an alternative approach to enable rapid, energy-efficient processing of SOEC per- ovskite precursor powders. Microwave heating offers distinct advantages, including volumetric and selective heating, reduced processing times, and improved energy utilization compared to con- ventional thermal methods. A multiphysics modeling framework is developed, which integrates electromagnetic wave propagation, governed by Maxwell’s equations, …

Plant-Wide Process Modeling, Techno-Economic Optimization, And Bayesian Uncertainty Quantification For Manufacturing Value-Added Products From Lignocellulosic Biomass, Poulomi Das

Graduate Theses, Dissertations, and Problem Reports (ETD)

For decades, many chemicals have been produced from fossil resources, contributing to resource depletion, pollution from extraction and refining, and hazardous byproducts. Growing environmental concerns and declining fossil reserves have intensified the search for sustainable sources of fuels, energy, and chemicals. Lignocellulosic biomass, the only abundant renewable carbon source, is therefore being explored as a feedstock for second-generation biofuels and high-value chemicals.

Currently, global wood-panel industry heavily depends on petroleum-derived commercial adhesives like phenol-formaldehyde, urea-formaldehyde, etc. These formaldehyde-based chemicals cause hazards to both human health and environment through emission of toxic volatile organic compounds. Typically, lignin is considered as one …

Semantic-Weighted Lidar–Camera Slam For Robust Mapping In Vegetation-Rich Environments, David Aigbovboise Akhihiero

Graduate Theses, Dissertations, and Problem Reports (ETD)

Many LiDAR odometry and SLAM methods are lightweight and effective, but they assume that all LiDAR point returns are equally reliable. In practice, this assumption is often violated in vegetation rich or semi transparent environments, where in a single beam footprint, LiDAR beams may intersect multiple scattering surfaces like leaves, branches or glass. These ambiguities in returns produces probabilistic or biased range measurements that violate the assumptions of most geometric registration frameworks and can lead to drift and inconsistency.

To address this challenge, this dissertation proposes a semantic-weighted LiDAR-camera SLAM framework that integrates class dependent weights into a front-end LiDAR …

Multi-Timescale Monitoring And Modeling For Resilient Smart Grids: Pmu Anomaly Detection And Battery Digital Twins, Muhammad Imran Hossain

Graduate Theses, Dissertations, and Problem Reports (ETD)

Modern power systems face failures at very different timescales. Cyber-physical disturbances may emerge within seconds, while battery degradation develops over hundreds of operating cycles. Both monitoring problems share the same underlying difficulty: power systems produce measurement data in abundance, but reliably labeled examples of abnormal or degraded operation are scarce. Rare grid events are difficult to label, and battery degradation data are heterogeneous across cells, cycling protocols, and chemistries. This thesis addresses these challenges through two complementary domain-informed learning frameworks that constrain representation learning using information specific to each physical problem.

First, at the system level, T-BiGAN, a Transformer-augmented bidirectional …

Cell-To-Pack Modeling Of Lithium-Ion Batteries: From Bayesian Parameterization To Pack-Level Optimization, Derek Slack

Graduate Theses, Dissertations, and Problem Reports (ETD)

One of the major hurdles for electric or hybrid aviation is the comparative energy density between lithium-ion batteries and jet fuel. To help obtain maximal power-to-weight ratio in electric or hybrid powertrains the battery pack design should be optimized to be as light as possible while meeting thermal safety and power requirements. The proposed solution is an optimization routine beginning with a cell-level parameter estimation of lithium-ion battery cells, where data driven Bayesian Gaussian Processes replace empirically or analytically derived parameters in a first principles electrochemical model in PyBaMM, as functions of the transient state of the cell. The resulting …

Dataless Neural Networks For Boolean Satisfiability And Network Optimization, Andrew Evan Gautier

Graduate Theses, Dissertations, and Problem Reports (ETD)

Combinatorial optimization problems (COPs) require searching over a finite solution space subject to constraints, with the goal of satisfying an objective function. They arise in operations research, scheduling, resource allocation, circuit design, and many other fields. Many problems in combinatorial optimization (including satisfiability and network design) are NP-hard. Traditionally, researchers have built approximate solvers that return near- optimal solutions efficiently by developing increasingly sophisticated heuristics and meta- heuristics. Deep learning has provided new opportunities for improving combinatorial solvers by leveraging neural guidance to prune the search space. Traditional neural networks have distinct drawbacks in this context: separate training and …

Data Augmentation And The Reliability Of Conformal Prediction For Uncertainty Quantification In Medical Imaging, Rizwan Ahamed

Graduate Theses, Dissertations, and Problem Reports (ETD)

The safe clinical deployment of deep learning models for high-stakes medical imaging tasks requires more than high average accuracy; it requires demonstrable, per-case reliability. Uncertainty quantification (UQ) provides the missing signal that tells a clinician when a model prediction can be trusted and when a case should be escalated for expert review. Among UQ approaches, conformal prediction (CP) is especially attractive because it produces prediction sets that are guaranteed, under the assumption of exchangeability, to contain the true label with a user chosen probability, and it does so without assumptions about the model or the data distribution. This report first …

Dielectrophoretic Biomarkers For Cancer Detection And Cell Analysis: Integrating Microfluidics And Ai, Raphael Olumide Oladokun

Graduate Theses, Dissertations, and Problem Reports (ETD)

Pancreatic ductal adenocarcinoma (PDAC) carries a five-year survival rate of 13%, driven largely by late-stage diagnosis and the absence of sensitive noninvasive screening tools. Current diagnostic methods lack the sensitivity to detect disease-associated systemic changes at early and precancerous stages, representing a critical clinical gap. This dissertation addresses the central hypothesis that PDAC and its pathological subtypes induce measurable, disease-associated electrophysiological changes in circulating PBMCs that can serve as correlative liquid-biopsy biomarkers. To test this hypothesis, this work asks: can dielectrophoresis (DEP), impedance and zeta potential analysis with AI-assisted classification distinguish benign pancreatic conditions (non-malignant control), precancerous lesions (primarily IPMNs), …

Process Modeling, Operability Analysis, And Techno-Economic Optimization Of Soecs For Sustainable H2 Production, Krishna Murthy Busam

Graduate Theses, Dissertations, and Problem Reports (ETD)

The global imperative to decarbonize energy systems has intensified research into sustainable hydrogen production pathways, as hydrogen emerges as a critical energy carrier for sectors difficult to electrify directly. Among water electrolysis technologies, solid oxide electrolyzer cells operating at elevated temperatures offer the highest theoretical efficiency by utilizing thermal energy to reduce electrical energy requirements, yet comprehensive frameworks integrating electrochemical modeling with process operability analysis and techno-economic optimization remain scarce in the literature. This dissertation develops a process systems framework for proton-conducting solid oxide electrolyzer cells that bridges the gap between fundamental electrochemical phenomena and industrial-scale process economics. At the …

A Multiobjective Framework For Joint Coverage And Motion Planning In Uav Inspection Tasks, Luis Fernando Escobar Carvajal

Graduate Theses, Dissertations, and Problem Reports (ETD)

Unmanned Aerial Vehicles (UAVs) have become essential for data acquisition in complex 3D environments. However, traditional Coverage Path Planning (CPP) methodologies often rely on a sequential pipeline that isolates viewpoint generation from flight path routing. This decoupling fails to account for the interdependence between viewpoint distribution and minimum flight paths, effectively restricting the search space and preventing the identification of a global optimum. This dissertation proposes a unified multi-objective framework for joint coverage and motion planning. The primary contribution of this work is the transition from isolated, sequential steps to a simultaneous optimization of the number and position of viewpoints …

Machine Learning-Based Prediction Of Heavy-Duty Diesel Engine Emissions And Comparative Analysis Against Statistical Models, Abdullah Ahmad Khan

Graduate Theses, Dissertations, and Problem Reports (ETD)

The increasing stringency of emissions regulations for heavy-duty (HD) diesel engines necessitates the development of accurate, efficient, and general predictive models for engine-out emissions under steady-state operating conditions. Traditional statistical approaches, while computationally efficient, often fail to capture the inherent nonlinear relationships between the engine operating parameters and emissions formation. In contrast, machine learning (ML) techniques offer a promising alternative by learning the complex patterns directly from experimental data. The present thesis summarizes a comprehensive study on the prediction of steady-state, HD diesel engine emissions using ML models, along with a comparative analysis against conventional statistical modeling approaches.

A high-quality …

A Digital Calibration Source For 21 Cm Cosmology Telescopes, Kalyani Balkrishna Bhopi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Precise calibration of radio telescope beams and gains is a central requirement for 21 cm intensity mapping experiments, which aim to measure large scale cosmological structure through the redshifted emission line of neutral hydrogen. Bright astrophysical foregrounds dominate the sky at these frequencies, and separating them from the cosmological signal demands precise control over instrumental systematics, particularly the telescope beam and its frequency-dependent response. Existing aerial calibration sources are incoherent broadband emitters, detectable only as total power. They provide no direct phase information and suffer from poor sensitivity in low signal-to-noise regimes.

We present the Precision Emitter for 21cm Array …

Simulation Optimization Of Intermodal Freight Transportation Under Disruptions, Israt Humayra

Graduate Theses, Dissertations, and Problem Reports (ETD)

Rapid growth in freight transportation in modern supply chains has led to increased operational costs, congestion, and severe environmental impacts, especially greenhouse gas emissions. Combining different modes, such as highway, railway, and waterway, intermodal transportation could thus offer considerable benefit to improve efficiency, sustainability, and resilience. However, most existing planning approaches rely on simplified assumptions, fixed schedules, and average cost estimates, making them less relevant to dealing with real-world uncertainties and disruptions. This study develops a simulation-optimization framework for intermodal freight transportation under disruption. We develop a mixed-integer programming model to represent an intermodal logistics planning framework on a multi-layered …

Swarm Of One: Self-Organization In Multicellular Robots, Trevor Riley Smith

Graduate Theses, Dissertations, and Problem Reports (ETD)

Designing robots traditionally relies on centralized, top-down methods that constrain adaptability and resiliency, producing systems optimized for specific tasks. However, such systems often fail in complex environments, such as extraterrestrial, disaster, or natural settings, where designers cannot foresee every scenario a robot may encounter. Achieving autonomy in these contexts requires robots that are resilient and capable of adapting to the unknown. Multicellular organisms exhibit this adaptability through self-organization, where complex structures and behaviors emerge from local interactions among their cells. Such organisms can be viewed simultaneously as a single entity and a swarm of cooperating cells, i.e., a Swarm-of-One.

This …

Optimization Of The Cmc Algorithm, Christopher Joseph Moner

Graduate Theses, Dissertations, and Problem Reports (ETD)

Cartridge cases recovered from discharged firearms contain tool marks produced by the internal mechanisms of said firearm. Firearm and tool mark examiners com pare these marks to determine whether two cartridge cases originated from the same firearm. Traditional comparison methods have been criticized for their subjective nature and reliance on examiner interpretation rather than objective decision thresholds. The Congruent Matching Cells (CMC) algorithm was developed as a quantitative, objective method for tool mark comparison. CMC is a surface topography correlation algorithm that partitions a tool mark into small regions, or cells, and evaluates their similarity using the areal cross-correlation function …

A Rapid, Accessible Active Learning Framework For Stem At Wvu Tech, Somenath Chakraborty, Zahmeeth Sayed Sakkaff

2026 Scholarly Teaching Conference: Poster Session Papers

Many undergraduates find it difficult to move from listening to doing—especially in STEM courses that require sustained practice, timely feedback, and confidence. This poster describes a rapid, low-cost active-learning routine that can be added to existing lectures at WVU Tech with minimal redesign. Instructors insert brief engagement micro-cycles every 10–15 minutes: a concept question or mini-problem, a one-minute individual attempt, a short pair discussion, and a concise explanation that targets common misconceptions.

Towards Increasing The Retention Of Freshman Engineering Students: Implementing A New Course, Ee 101 Introduction To Electrical And Computer Engineering, Omer Lateef, Mingyu Lu, Waseem Alaqqad, Charan Litchfield, Kenan Hatipoglu

2026 Scholarly Teaching Conference: Poster Session Papers

To assist with improving student retention in the undergraduate electrical and computer engineering program, a course was developed and implemented at the freshman level in the Spring of 2021.  This course was named EE 101: Introduction to Electrical and Computer Engineering and served to give freshman students an opportunity to meet the professors of the ECE department and experience live sessions dedicated to presenting “upcoming” topics and research endeavors of their expertise.  Students typically will not be attending the electrical or computer engineering subjects until their sophomore year and this course, set in second semester for a freshman, attempts to …

Strain-Induced Nonvolatile Domain Switching And Tunable Elastic Modulus In Ba1-Xsrxtio3 Membrane By Phase-Field Simulation., Laveeza Ahmad

Material Science and Engineering Dissertations

Ferroelectrics underpin a broad spectrum of technological applications due to its switchable ferroelectric polarization and the associated electro-mechanical responses under electrical, optical, thermal, and mechanical stimuli. Recent advancement in membrane technology offers new opportunities to tune ferroelectric polarizations via mechanical strains at relatively large magnitude and scale. However, its influence on the tunability of mechanical responses of the membrane remains underexplored. Herein, we developed a phase-field model for free-standing Ba_1-xSr_xTiO₃ ferroelectric membranes with stress-free boundary conditions on top/bottom surfaces and achieved strain-induced nonvolatile ferroelectric domain switching in the membrane. It is discovered that a …

Advancing Edge Intelligence: Strategies For Improving Machine Learning On Embedded Devices, Prakash Dhungana

Theses and Dissertations--Electrical and Computer Engineering

Artificial intelligence (AI) has demonstrated tremendous success in handling complex tasks across multiple domains, a leap largely attributed to complex deep neural network (DNN) architectures. However, the increasing demand for real-time processing, low latency, limited connectivity, and enhanced privacy necessitates edge intelligence, where computation is performed directly on resource-constrained embedded devices rather than relying on cloud infrastructures. While optimized TinyML techniques such as pruning, quantization, and neural architecture search (NAS) have made edge deployment feasible by significantly reducing computation and memory demands, achievable performance remains severely limited by hardware constraints. Furthermore, models deployed in highly dynamic real-world environments suffer from …

Evaluating Species At Risk In Data-Limited Fisheries: A Productivity-Susceptibility Analysis For Marine Aquarium Fish, Gabrielle A. Baillargeon, Alice A. Wynn, Jemelyn Grace P. Baldisimo, Michael F. Tlusty, Andrew L. Rhyne

Biological Sciences Faculty Publications

The marine aquarium trade (MAT) is a significant global industry harvesting millions of wild-caught, live coral reef fishes for public and private aquaria markets in the United States and Europe annually, while supporting fisher livelihoods in the Indo-Pacific. This diverse and species-rich trade is considered data-limited, creating barriers to quantifying the current and future socio-ecological sustainability of the fishery. We present a revised and expanded productivity–susceptibility analysis (PSA) that serves as a holistic risk assessment to estimate the vulnerability of marine aquarium fish to overfishing. Our global analysis includes 306 species that are actively in trade. Improvements to the PSA …

De Novo Protein Binding To Zinc Oxide Through Biomineralization Pathways, Jean-Mark A. Francis

Theses and Dissertations

De novo proteins are structurally distinct from proteins found in nature and thus capable of having their amino acid sequence modified to accomplish tasks such as increasing protein-nanoparticle binding without unfolding or decomposing. Zinc Oxide nanoparticles are functionally distinct from their bulk counterparts and are widely used as semiconductors in a variety of fields such as medicine and agriculture. With demand for these nanoparticles increasing, environmentally sustainable methods of Zinc Oxide nanoparticle synthesis are being investigated as an eco-friendly alternative to currently utilized but environmentally hazardous chemical and physical techniques. This research investigates the binding characteristics between Zinc Oxide nanoparticles …

Fused Filament Fabrication Additive Manufacturing Of 17-4 Ph Stainless Steel: Process–Structure–Property Relationships In Magnetic Materials, Maanav Patel

Theses and Dissertations

Additive manufacturing (AM) enables the fabrication of complex metallic components through layer-by-layer processing directly from digital models. Among AM techniques, material extrusion–based processes such as fused filament fabrication (FFF) provide an accessible method for producing metal parts using filament feedstocks composed of metal powders and polymer binders. When applied to precipitation-hardening stainless steels such as 17-4 PH, the processing route and heat treatments can influence the resulting microstructure and functional properties. This work investigates the magnetic behavior of 17-4 PH stainless steel fabricated using FFF and evaluates how heat treatment conditions influence measured magnetic properties. Samples were produced and analyzed …

Nanomagnet Based Straintronic Devices For Unconventional Computing: Simulation And Performance Analysis, Rahnuma Rahman

Theses and Dissertations

Nanomagnetic devices are of great interest in digital hardware because of their non-volatility and dynamic ability to change magnetization but suffer from high switching error rates and temperature sensitivity. Magnetostrictive nanomagnets that utilize strain to switch between stable magnetization states encoding bit information are of interest since they are extremely energy efficient as piezoelectric layers can be used to rotate magnetization that have switching energies in the range of attojoules. Their stochasticity can also be useful in probabilistic, analog, neuromorphic, and collective computing systems, where occasional switching errors are not devastating. The dissertation extends spintronics beyond conventional computing schemes by …

A Quantitative Analysis Of Burrowing And Subterranean Locomotion In The Sand Lance Using A Transparent Sediment, Issei Fujita, Makoto Tomiyasu, Jun Yamamoto, Yasuzumi Fujimori

Journal of Marine Science and Technology–Taiwan

Sand lances (Ammodytes spp.) rely on rapid burrowing into sediment for predator avoidance. Although their sediment grain-size preferences are well documented, the biomechanics underlying burrowing success remain unclear because natural substrates are opaque. Using a transparent-sediment system, we directly visualized and quantified burrowing kinematics to: (1) test the effect of body size (total length, TL) on burrowing success; (2) examine entry mechanisms (e.g., swimming speed, entry angle); and (3) describe locomotion within sediment. Logistic regression on the full dataset (N = 28 fish) identified TL as the primary determinant of success, with larger individuals exhibiting significantly higher success …

Cruise Network Design Under Sequential Duopolistic Entry, Ta-Hui Yang, Ching-Hui Tang, Wan-Tien O

Journal of Marine Science and Technology–Taiwan

This study addresses the network design for international cruise services in a duopolistic market, where carriers enter and make decisions sequentially. The leader, who makes the first move, makes decisions as there is no competitor in the market. The follower, who makes decisions later, has to design their network considering the existing leader’s network. The leader’s model is a mixed integer linear problem while the follower’s model is a mixed integer nonlinear problem. Therefore, a heuristic is proposed to solve the problem. The commercially available general algebraic modeling system is used in conjunction with its different solvers to solve the …

Effect Of Heat Treatment On The Corrosion And Wear Behavior Of 17-4 Ph Stainless Steel For Marine Applications, Syuan Tai, I-Kon Lee, Ming-Yuan Lin, Kang-Yu Liao, Chin-Chun Chang, Hung-Bin Lee

Journal of Marine Science and Technology–Taiwan

This study explores the tribocorrosion behavior of conventionally cast 17-4 PH stainless steel under real seawater conditions, focusing on the effects of three heat treatments (Solution, H900, H1100). Electrochemical tests, tribocorrosion experiments, SEM, XPS, and quantitative analysis were used to establish a three-stage tribocorrosion mechanism. Results show that H900 exhibits superior corrosion and wear resistance, while H1100 suffers increased material loss and surface cracking at high potentials. Elemental analysis revealed NbC migration forming third-body particles, which, although briefly reducing friction, induced local stress concentration and crack initiation. The findings highlight the critical influence of microstructure, passive film stability, and third-body …