Digital Commons Network^™

Intelligent Formation Control Using Orfbls And Adaptive Backstepping Sliding-Mode Control To Address Uncertain Tilting In Multi-Quadrotors During Wind Gusts, Ching-Chih Tsai, Chun-Fu Mao, Kumail Hussain

Journal of Marine Science and Technology–Taiwan

In terms of aerial robotics, stable and precise formation control is a significant challenge for tilting multi-quadrotors during disturbances. This paper proposes a fixed-time formation control strategy for tilting multi-quadrotors to address the effect of external wind gusts. The observer accurately predicts environmental disturbances and an adaptive backstepping sliding-mode control (ABSMC) method with an output recurrent fuzzy broad learning system (ORFBLS) addresses these disturbances within a finite time. ORFBLS dynamically adjusts its structure through a growing ORFBLS structure to allow nodes to be added as needed. The method's stability is validated using Lyapunov stability theory and ensures the convergence of …

Visually Guided Landing System On Ship Deck For Multicopter, Dong-Lin Li, Shih-Kai Lee, Tzu-Hsiang Chou

Journal of Marine Science and Technology–Taiwan

Traditionally, high-value fish have been located at sea using helicopters. However, with advancements in technology, maritime drones have become increasingly important in recent years. Compared to traditional helicopter-based methods, drones offer significantly lower operational costs, making them cost-effective. However, the challenging sea conditions, including strong winds and the swaying motion of vessels, pose significant challenges for drone landings.

This paper proposes a stable approach for multicopter landing on ships at sea, incorporating improved marker detection, enhanced wind resistance control, and more accurate deck motion prediction. In the marker detection phase, we introduce a method to improve the accuracy of ArUco …

Autonomous Uav Mission Planning Under Threat Using Model Predictive Control With Proportional-Navigation Pursuers, Mehmet B. Ozcelik

Mechanical and Aerospace Engineering Theses

Autonomous unmanned aerial vehicles (UAVs) operating in contested environments must

complete mission objectives while avoiding restricted regions, radar exposure, and pos-

sible interception. This thesis develops a MATLAB-based simulation framework for

two-dimensional UAV mission planning under threat using model predictive control and

proportional-navigation chasers. The mission requires the UAV to travel from a start

location to a goal while visiting required checkpoints and avoiding no-fly zones and radar

regions. A chaser attempts to intercept the UAV using either a basic pure-pursuit-style

law or a proportional-navigation guidance law.

The framework integrates environment generation, augmented visibility-graph rout-

ing, waypoint management, UAV kinematic …

Llm-Driven Closed-Loop Uav Control With Obstacle-Aware Model Predictive Control, Halimcan Yasar

Mechanical and Aerospace Engineering Theses

This thesis presents a closed-loop control architecture for uncrewed aerial vehicles (UAVs) in which a large language model (LLM) serves as a high-level decision module operating over a persistent, metric 3D world model.

Rather than generating low-level commands or open-loop plans, the LLM selects one parameterized maneuver per decision step from a small, verified library of flight primitives conditioned on a structured representation of the drone state, tracked object positions, and mission specification.

Translational motion is executed by a planar model predictive controller (MPC) with soft obstacle avoidance, using obstacle hypotheses provided by the LLM, so that safety-critical constraint handling …

Deep Learning Approaches For Voltammetric Analysis Of Coffee, Ryan Koes

Honors Theses

This thesis investigates deep learning approaches for voltammetric analysis of brewed coffee using a low-cost electrochemical system and screen-printed electrodes (SPEs). Traditional analytical methods, such as high-performance liquid chromatography (HPLC) and gas chromatography-mass spectrometry (GC-MS), provide precise quantification of key compounds but require expensive instrumentation and specialized expertise, limiting accessibility. While SPEs offer a more accessible alternative, they yielded poor results with traditional processing; however, when combined with a neural network, the system proved more effective. In experiments with 132 coffee samples, mean errors for caffeine, CGA, and TDS predictions were 52.98 ppm, 70.48 ppm, and 0.08%, respectively. These findings …

A Web-Based Wizard-Of-Oz Platform For Collaborative And Reproducible Human-Robot Interaction Research, Sean O'Connor

Honors Theses

The Wizard-of-Oz (WoZ) technique is widely used in Human-Robot Interaction (HRI) research, but two persistent problems limit its effectiveness: existing tools impose technical barriers that exclude non-engineering domain experts (the Accessibility Problem), and the fragmented landscape of robot-specific implementations makes interaction scripts difficult to port across platforms (the Reproducibility Problem- concerning execution consistency and portability, not third-party replication). Through a literature review, I identified three design principles to address both: a hierarchical specification model, an event-driven execution model, and a plugin architecture that decouples experiment logic from robot-specific implementations. I realized these principles in HRIStudio, an open-source, web-based platform providing …

Combining Haptic Feedback With Electromyography To Study Knee Injury In Stationary Cycling, Christopher Kirby

Honors Theses

Patellofemoral Pain Syndrome (PFPS) is the most prevalent overuse injury in cycling, often linked to altered neuromuscular activation patterns of the quadriceps and hamstrings. While sensory feedback has successfully modified cyclists posture, there is a critical lack of evidence-based interventions targeting the underlying muscle activation imbalances associated with chronic knee pain. This study aimed to develop and validate a novel, real-time biofeedback system that utilizes electromyography (EMG) to trigger vibrotactile cues, aiming to shift muscle onset timing earlier in the pedal stroke to mitigate PFPS-related imbalances. A closed-loop system was engineered by integrating a Delsys EMG system with a SageMotion …

Buckling Analysis Of Auxetic Composite Laminates And Optimal Design Using Lamination Parameters And Machine Learning, Hans Bendon Maria Tamil Selvan

Mechanical and Aerospace Engineering Theses

Composite materials are widely used as structural panels in aerospace, automotive, and civil engineering applications, where buckling is often a critical failure mode. This thesis focuses on the analysis and design of composite laminates that maximize buckling performance under prescribed stiffness and thickness constraints.

The first part of the study investigates the buckling behavior of auxetic laminates, which exhibit a negative Poisson's ratio. While previous studies suggest that auxetic laminates can achieve higher critical buckling loads than non-auxetic laminates under simply supported boundary conditions with lateral restraint, the influence of other boundary conditions and plate aspect ratios has not been …

Sainik Vol 1 Issue 2, Sastra Deemed To Be University

SAINIK

No abstract provided.

Powering The Machine, Draining The Planet: Whether U.S. Environmental Law Is Equipped To Regulate The Energy And Water Demands Of Ai Data Centers, Michael Marcu

Journal of Earth and Life Science

Artificial intelligence (AI) data centers have become one of the United States' fastest-growing and least-regulated sources of environmental stress. In 2024 alone, U.S. data centers consumed 183 terawatt-hours (TWh) of electricity more than the entire nation of Pakistan and consumed an estimated 17 billion gallons of water (IEA, 2025; Berkeley Lab, 2024). By 2030, electricity demand from these facilities is projected to reach 426 TWh, a 133% increase in six years (Pew Research Center, 2025). This paper examines whether the existing U.S. environmental regulatory framework put by the National Environmental Policy Act (NEPA), the Clean Water Act (CWA), and the …

Typology And Spatiotemporal Patterns Of Illegal Fishing Activities In The Philippines: Implications For Fisheries Management, Marlowe O. Acevedo, Tzu-Yun Ching, Chih-Shin Chen

Journal of Marine Science and Technology–Taiwan

Illegal, unreported, and unregulated (IUU) fishing activity is a global threat and continues to undermine the effectiveness of fisheries regulations and management measures. However, the extent of illegal fishing in Philippine waters remains unclear. This study aims to identify the types of illegal fishing in Philippine waters and analyzed their temporal and spatial patterns. Data were obtained from the records of the Philippine Coast Guards (PCG) and Maritime Law Enforcement Agencies from 2015 to 2020. A total of 602 apprehensions were recorded, resulting in 813 violations, of which 630 cases were fishery violations. Most of the watercrafts involved in the …

Machine-Learning- And Iot-Based Approach For Predicting Water Quality Using Data Classification And Explainable Ai Technique, M. Samir Abou El-Seoud, Omar H. Karam 2, Hosam El-Sofany 3

Computer Science

Maintaining water quality is crucial for both public health and environmental sustainability. This study proposes a machine-learning- (ML-) and Internet-of-Things- (IoT-) based approach to water quality prediction that utilizes explainable artificial intelligence (XAI) and data classification techniques. The proposed approach integrates IoT devices to enhance real-time data collection, facilitating continuous monitoring and early anomaly detection. Ten different ML classifiers—Decision Trees, K-Nearest Neighbors, XGBoost, Naïve Bayes, Logistic Regression, AdaBoost, Random Forests, Support Vector Machines, Voting, and Multi-Layer Perceptron—were evaluated to find out which one works best for predicting water quality. We used three distinct approaches for feature selection: analysis of variance …

A Hybrid Cnn-Lstm Surrogate Model For Hyper-Resolution Spatiotemporal Flood Forecasting In Norfolk, Virginia, Yidi Wang, Jonathan L. Goodall, Chetan Kumar, Diana Mcspadden, Sergio A. Barbosa, Binata Roy, Ali Shahabi, Navid Tahvildari

Data Science Faculty Publications

Study region

Norfolk, Virginia, United States

Study focus

Accurate and timely flood forecasting is essential for enhancing resilience in coastal urban areas in the context of increasing frequency and intensity of rainfall, sea level rise and urbanization. This study presents a hybrid deep learning-based surrogate model that integrates Convolutional Neural Networks (CNN) and Long Short-Term Memory (LSTM) networks to enable real-time spatiotemporal flood forecasting. The model leverages CNN to capture spatial features from inputs such as elevation and Topographic Wetness Index (TWI), while LSTM processes time-series inputs of rainfall and tide data to capture temporal features.

New hydrologic insights for …

Ai-Based Smart Proxy Models For Flow Assurance, Integrating Oil Rate Prediction, Pipeline Monitoring, And Leak Detection, Ali Sajedian

Graduate Theses, Dissertations, and Problem Reports (ETD)

Oil and gas pipeline networks operate under complex multiphase flow conditions and dynamic transient regimes that present significant challenges for traditional monitoring, anomaly detection, and operational decision-making methodologies. Many existing monitoring approaches rely on high-fidelity physics-based transient flow simulations to accurately represent system behavior. However, these models are computationally intensive and therefore difficult to implement in real-time operational environments.

This dissertation presents a physics-guided artificial intelligence framework for intelligent pipeline monitoring and integrity management based on the concept of Smart Proxy Modeling. By integrating first principles engineering knowledge with machine learning techniques, the proposed framework develops computationally efficient surrogate models …

Smartbot V3: A Scalable Educational And Research Robotics Platform And Decentralized Construction Framework, Robert Tyler Cook

Graduate Theses, Dissertations, and Problem Reports (ETD)

Autonomous robotic systems are increasingly used in both engineering education and robotics research, creating a need for systems capable of supporting both within a common platform. This thesis presents SMARTbot V3, a scalable robotics platform developed to support undergraduate robotics education and multi-robot research.

SMARTbot V3 is a differential-drive mobile manipulator incorporating a 3-degree-of-freedom manipulator, LiDAR, RGB cameras, onboard computation, and Robot Operating System 2 (ROS2) software. The platform was designed to support scalable deployment through standardized hardware, modular construction, and common software. A fleet of twenty robots was manufactured and deployed for both educational and research activities. Educational validation …

Bridging Physics-Based Modeling And Machine Learning To Predict Material Behavior: Applications In Fatigue Crack Growth And Dielectric Property Characterization, Ansan Pokharel

Graduate Theses, Dissertations, and Problem Reports (ETD)

This dissertation integrates physics-based modeling with machine learning (ML) to predict how materials behave under complex thermal and mechanical conditions. A key innovation of this work is the use of finite element analysis (FEA) to supplement experimental data. This approach creates more diverse and representative synthetic datasets, helping to reduce the limitations and biases that arise when training ML models solely on experimental measurements. The research focuses on two applications: improving the prediction of fatigue properties in superalloys and estimating temperature-dependent, high-frequency dielectric properties relevant to microwave-based chemical processing.

In the first study, low-cycle fatigue experiments were performed on the …

A 1d Symmetric Interior Penalty Discontinuous Galerkin Solver In Rust, William Aey

Williams Honors College, Honors Research Projects

This honors project will build a 1D Symmetric Interior Discontinuous Galerkin (SIPDG) solver in Rust for Stum-Liouville type problems such as the Poisson equation, with Robin, Dirichlet, and Neumann boundary conditions. The work will cover the full pipeline: starting from the strong form of the PDE, deriving the DG weak form, implementing element and interface operators, and assembling or apply the discrete operator. Rust's safety and concurrency (e.g, via Rayon) will be used to explore serial and parallel performance. A test-driven development approach will be used to maintain a strong suite of tests. The project will result in a documented …

Printer For Music Box, Chad Lewis, Caleb Murawski, Zion Smith, Bryan Tibbs

Williams Honors College, Honors Research Projects

The traditional method of creating music box sheet music involves manually punching holes into a paper strip using a hand-operated hole punch. This process involves precise knowledge of each note’s location and the ability to achieve perfect accuracy for hours.

The goal of this system is to automate this process, significantly reducing the time required while greatly improving the accuracy of the resulting music box playback. The user simply uploads a MIDI file of their choice into a user-friendly application. Here, the file is modified based on the user’s needs and sent to an automated hole-punching system to punch the …

Analyzing Network Traffic And Data Exfiltration Via Smb In Post-Vm Escape Scenarios, Noah M. Disanza

Williams Honors College, Honors Research Projects

Virtual machines (VMs) play a crucial role in modern IT infrastructure environments by providing isolation and enhanced security, among other things, for both personal and corporate systems. VMs are heavily rely upon to safely test malware, manage infrastructure, and reduce risk to host systems. This reliance is so substantial that the idea of reducing risk to the host system is believed to be erasing risk entirely. However, this mindset has shown to be challenged time and time again by the emergence of exploits known as virtual machine escapes. These exploits allow malicious actors to break out of the virtualized environment …

Proceedings Of The Eleventh Annual Indiana Stem Education Conference: Stem Journeys, William S. Walker Iii, S. Selcen Guzey

Indiana STEM Education Conference

The Proceedings of the Eleventh Annual Indiana STEM Education Conference are edited by the Center for Advancing the Teaching and Learning of STEM (CATALYST, https://www.education.purdue.edu/catalyst/) at Purdue University. The theme for the 2026 conference is STEM Journeys, celebrating the multiple pathways and experiences that advance student learning in STEM education.

Renewable Energy Innovation: A Mathematics-Driven Integrated Stem Approach For K-12 Classrooms, Humphrey Chinenye Ochulor, Dayat Hidayat

Indiana STEM Education Conference

This research brief presents Renewable Energy Innovation (REI) as a mathematics-driven Integrated STEM (iSTEM) approach for engaging upper elementary and middle school students to design, analyze, test, and refine solar cars and wind turbines through mathematical modeling (MM) and problem solving (PS). Research suggests that renewable energy activities support students’ abilities to design systems, quantify variables, construct multiple representations, and refine mathematical models to clarify relationships between energy output and design features. Positioning mathematics as the driver in REI iSTEM engineering design contexts aligns with the Common Core State Standards for Mathematics and foregrounds mathematics as a primary organizing discipline …

Stem Integration Through Environmental Data Analysis For Real-World Problem Solving, Abigail Erskine

Indiana STEM Education Conference

Integrating authentic, environmental-based data can make STEM instruction more meaningful. As part of a broader high school STEM curriculum, I designed a lesson that connects mathematical and statistical concepts, technology, and environmental data through environmental data analysis to develop real-world problem solving. Using local deer mortality data, I examined how descriptive statistics and data interpretation could reveal population and ecological patterns. Designing with real data highlighted how mathematics can serve as a lens for understanding environmental issues and promote connections across STEM disciplines. This research brief focuses on the instructional design and reflection as the lesson designer.

Large Telescope Mount For Long Exposure Photos, Payne M. Landis, Anna J. Gray

Williams Honors College, Honors Research Projects

When viewing the stars through a telescope, it is common that the object you are viewing drifts out of view. Many amateur astronomers seek to capture long exposure images of the stars, planets, and galaxies with commercially available sky tracking telescope mounts. The complication is that these telescope mounts are both incredibly expensive and have low weight limits. These issues limit accessibility to these products based on the telescope. For each person, telescope parameters determine the amount of light and magnification that can be viewed, which then determines exposures time for adequate photo results. The options on the market for …

Optimization Of Post-Processing Methods For Additively Manufactured Metals, Julia R. Carano

Williams Honors College, Honors Research Projects

Ultrasonic Nanocrystal Surface Modification (UNSM) is a process used to change the surface hardness of flat-faced materials. It is a machining process using a high-powered laser and a blunt-tipped tool at high speeds which aims to improve the uniformity of the surface on most metals. By heating and pressing the surface of the workpiece, the grains of the material become less rounded and more cohesive on a microscopic level. This, ideally, results in a workpiece with improved material properties. The changes were previously observed through hardness testing.

Thermal Radiation Effects On Particles From Plasma Arc Radiation, Reece Davis, Joseph Mcgee

Williams Honors College, Honors Research Projects

Understanding the radiation heating and transport of both microparticles and nanoparticles is a phenomenon that is critical for both space and Earth sciences. In space, these particles are heated by plasma arcs within ionized space clouds or solar flares and can be present the path of deep space missions and orbital satellites. While on Earth, processes such as forest fires, nuclear fusion, and microchip manufacturing include the plasma arc heating of particles. These particles lay within the Mie Scattering Regime and Rayleigh Scattering Regime and emit radiation differently based on their diameter. New mathematical and computational modeling has been conducted …

Development Of A Signature Model For Predicting Normal Boiling Point Using Machine Learning, Mackenzie Karabin

Williams Honors College, Honors Research Projects

The goal of this project was to utilize the Signature molecular descriptor to construct a predictive model for computing the normal boiling point using a 4856-compound dataset. The final model intends to be applied to screening compounds whose experimental normal boiling point values are not readily available. Compounds were deconstructed into their height-1 atomic Signatures, resulting in 225 unique descriptors for the dataset, which were used as independent variables for creating the model. Machine learning (ML) techniques were employed to evaluate the applicability and accuracy of different ML models for predicting normal boiling point using the Regression Learner App in …

C. Difficile Detection Method For First Responder Glove Application, Alli N. Senedak

Williams Honors College, Honors Research Projects

Clostridioides Difficile (C. diff) is a Anaerobic Gram-positive bacillus that is capable of spore formation, making it difficult to control its spread and duration in clinical environments. This phenomenon can provide danger to first responders, healthcare workers, and patients. The goal of this project is to create a biosensor capable of detecting C. diff in a clinical setting that can be applied to a glove apparatus. The project will involve the use of C. diff aptamers activated on the surface of an electrode. Once surface activation has been verified via surface analysis, the electrodes will be exposed to C. diff …

Predictive Structural Modeling In Ansys And Destructive Testing For Composite Structures, Dylan Matthews, Grant Abraham, Andrew Raineri

Williams Honors College, Honors Research Projects

Composite structures are central to the performance and reliability of Zips Racing’s Formula SAE vehicles, yet the team currently relies on historical data and partially unvalidated assumptions when selecting carbon fiber layups. This project aims to establish a quantitative, experimentally validated framework for designing composite components through the integration of simulation modeling, physical fabrication, and destructive mechanical testing. Analytical laminate theory models developed in MATLAB and laminate simulations created in Ansys ACP will be used to predict stiffness, strength, and failure characteristics for a range of candidate layups. These predictions will be validated through controlled testing of fabricated composite coupons …

Green Energy Innovation As A Theme For Integrated Stem Curriculum In K-8 Out-Of-School Learning, Humphrey Chinenye Ochulor, Paul Asunda, Swagata Sarkar, Comfort Temitope Aje, Deepanshu Gupta

Indiana STEM Education Conference

In this project, we developed a theme of Green Energy Innovation (GEI) for K-8 integrated STEM (iSTEM) out-of-school learning that includes scientific concepts, engineering design, mathematical measurement, and data collection. Anchored in engineering design (English, 2016), the researchers designed a curricular unit that included simple and complex solar car models. The researcher-designed solar car prototypes serve as STEM kits that support students’ iSTEM-based engineering design activities.

Indiana Bridges: Inclusive Stem Learning For Students With Down Syndrome, Elizabeth N. Christian, Jeffrey A. Nowak

Indiana STEM Education Conference

This research brief explores how materials and the engineering design process may be used to support inclusive STEM learning for students with Down syndrome. Conducted as a series of five consecutive workshops over a summer break, the Indiana Bridges project introduced engineering concepts through bridge-themed sessions created to be accessible for all ages and abilities. Students ages 11-20 with Down syndrome and two teacher education faculty participated in five workshops. Family members and center support staff frequently participated. Bridges from across the state of Indiana and classroom materials familiar to the participants provided entry points while new materials extended their …