Digital Commons Network^™

Self-Heating Of Wood Fiber, Kenneth Norman Smith

Theses

An investigation was made to determine what portion of wood is responsible for the self-heating of wood fiber, where self-heating is defined as the increase in temperature of a material above the temperature of its surroundings due to an exothermic reaction occurring within the material. The phenomenon of self-heating of wood fiberboard has long been known, but very little has been done to discover the particular part of the wood which generates the heat.

Wood fiberboard was tested for self-heating by placing a. cubical sample in a specially constructed furnace and heating it to a uniform temperature of 325?F. As …

The Design And Construction Of A High-Temperature X-Ray Sample Holder For Use With The Norelco Diffractometer, Jerry F. Koon

Bachelors Theses and Reports, 1928 - 1970

The purpose of this paper is to describe the design and construction of a sample-holder for high-temperature x-ray diffraction work. This sample-holder will be used in conjunction with a Norelco Diffractometer. Design of this attachment is such that it will meet certain limitations, which will be presented in detail, offered by the diffractometer.

The Use Of Perlite As An Adsorbent, John Herrick Eigler

Theses

The adsorptive properties of perlite, an expanded volcanic glass, have been studied. Several activating treatments were investigated, air oxidation it 400 degrees Centigrade appears to be the best, The adsorption of the basic dye emethylene blue yields a saturation valve of 50 milligrams per gram of perlite. The acid dye cotton blue showed no measurable adsorption. A maximum adsorption of 15 millimoles of acetic acid and one milligram of iodine were found in aqueous solution. A high value of 1.33 milligrams of iodine per gram of perlite were found in methyl alcohol solutions. The surface area of perlite appears to …

Aryl Sulfonation In Presence Of Phosphrous Trichloride, William Calvert Tanner

Theses

With sulfuric acid as the sulfonating agent, phosphorus trichloride is demonstrated as being effective in facilitating the sulfonation of some aromatic compounds. Optimum conditions are a molar ratio of 0.5 mole of sulfuric acid: 1.0 mole of aromatic compound with 4 - 5% more phosphorus trichloride than is required to react with the available water in the system, and reaction temperatures between 50°C. and 60°C.

The aromatic compounds studied were benzene, chlorobenzene, bromobenzene, and nitrobenzene.

The Vacuum Desulphurization Of Copper Mattes, Robert L. Trevison

Bachelors Theses and Reports, 1928 - 1970

The first application of vacuum techniques to the metallurgical industry was made in the early part of this century by Rohn, a German, who developed vacuum technology to a production status in the specialty metals business. Although extensive use of vacuum processing technology was made in the lamp and electrical industries, the methods used were considered to be impractical up to about ten years ago even though remarkable improvements were made during World War II. Wartime demands for magnesium and for uranium which necessitated the use of a high vacuum in their production led to the perfection of mechanical pumps, …

Shaft Mucking Investigation Part 2, Jorge R. Delzo

Bachelors Theses and Reports, 1928 - 1970

By use of several digging principles, such devices as scrapers, clamshells, power shovel loaders, etc., have been perfected. The net results have been an almost complete elimination of hand mucking, an increase of loading speed, and a reduction of sinking costs. Moreover, the elimination of hand mucking has had a favorable psychological effect on the crew, as well as saving physical effort for the other phases of the shaft-sinking cycle.

Diamond Drilling Equipment, William R. Cox

Bachelors Theses and Reports, 1928 - 1970

Diamond drilling is based on the extreme hardness of the diamond enabling it to cut or abade rocks, minerals or other materials found in the earth's crust, or that may be manufactured by man.

Open Pit Mining Operations, James A. Simon

Bachelors Theses and Reports, 1928 - 1970

This report on open pit mining operations will discuss: the history of open pit mining, factors important in the selection of open pit mining and in the development of an open pit, and the various mining and operational methods used in this type of an operation. Stripping coal mining operations will be discussed but the majority of the report will be on open pit metal mines.

An Investigation Into Salt-Bath Heat Treatment For Titanium, Robert Fred Bechtold

Bachelors Theses and Reports, 1928 - 1970

Titanium, although possessing excellent corrosion resistance in some media, is severely attacked by molten inorganic salts such as those employed in heat-treating baths. Since titanium undergoes allotropic changes, many of its alloys are amendable to heat treatment. The purpose of this study was to discover a salt (or other suitable medium) in which titanium alloys can be successfully heat treated without fear of corrosion.

Temperature Forecasting At Logan, Utah, For The Snowmelt-Runoff Season, Clifton Johnson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this thesis is to investigate the practicability of forecasting temperatures for the spring and summer snowmelt-runoff season. A successful temperature forecast for Logan, Utah, would be useful in studies of Logan River streamflow, as well as other related applications.

Logan, Utah, is situated in a region where the snow accumulates during the winter and early spring at high altitudes and remains until the proper sequence of meteorological events provides the thermodynamic conditions essential for melting. Snow surveys provide an index to the water available on a watershed. Temperature conditions during the melt period largely determine the available …

Initial Bibliography Of Soviet Military Medicine, 1917-1950, Medical Information And Intelligence Agency, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

This is a author list of more than 1000 articles about Soviet military medicine with a subject index.

This compilation is an initial listing of Soviet military articles, less specialized naval and aviation topics, from the time of the Bolshevik Revolution to the outbreak of the Korean conflict as they appeared in the Quarterly Cumulative Index, Volumes 1-11 and the Quarterly Cumulative Index Medicus, Volumes 1 - 55.

The subject headings searched are listed below and constituted 20,167 entries for this thirty three year period. 887 of these entries were of Soviet origin and comprised the publications of the 1,025 …

Shaft Mucking Investigation Part 1, Jorge R. Delzo

Bachelors Theses and Reports, 1928 - 1970

This paper represents an attempt to explain the operation of inclined-shaft mucking, and the machines developed for this purpose. It also covers some research done for the design of a continuous shaft mucking device, which could in the future prove to be the answer to this important problem. In many small or intermediate mining operations, where this problem has been a prime headache, the added costs of shaft mucking, because of lack of speed, and versatility, might very well mean the difference between profit and collapse.

Creep Characteristics Of Thin Prestressed Concrete Slabs, Wayne F. Alch

Masters Theses

"Prestressed concrete as a structural material is finding wider usage in the United States today. Until recently, economic factors have precluded the use of prestressed concrete in this country, while Europe became the leader in discovering new uses and applications in construction for the material. As new methods are developed in this country, more engineers and contractors are discovering that prestressed concrete is, in many ways, far superior to plain or reinforced concrete. In line with this awakening the Missouri Highway Department is carrying on research to determine the feasibility of prestressed concrete for highway slabs. This study is a …

A Determination Of The Sonic Modulus Of Early Age Concrete, William Dale Nelson

Masters Theses

"The problem which the writer is analyzing in this thesis was suggested by Professor E. W. Carlton of the Civil Engineering Department. It is a determination, by use of sonic testing equipment, of the growth in the sonic modulus of early age concrete.

Since 1938 when T. C. Powers published his paper, "Measuring Young's Modulus of Elasticity by Means of Sonic Vibrations", in the proceedings of the American Society of Testing Materials, Vol. 38, Part II, a great deal of work has been done on the applications of sonic testing of concrete. It began a new era in concrete testing, …

Considerations Of Equipment, Methods And Standards Of Accuracy Applicable To Aerial Surveys For Different Purposes : Technical Paper, Robert Douglas Miles

JTRP Technical Reports

No abstract provided.

Highway Highlights Of 1956 And The Challenge Ahead : Technical Paper, Arthur K. Branham

JTRP Technical Reports

No abstract provided.

Selection And Retention Of Civil Engineer Employees : Technical Paper, Arthur K. Branham

JTRP Technical Reports

No abstract provided.

The Estimated Effects Of Four Proposed Shopping Centers On Metropolitan Lafayette, Mart Kask

JTRP Technical Reports

No abstract provided.

Lane Use Control On Urban Thoroughfares, Kevin A. Macnaughton

JTRP Technical Reports

No abstract provided.

A Review Of Research On Deleterious Substances In Concrete Aggregates : Technical Paper, Robert Lee Schuster

JTRP Technical Reports

No abstract provided.

A Thermodynamic Study Of The Titanium Sulfides, Reinhard Paul Abendroth

Doctoral Dissertations

"The determination of the thermodynamic properties of chemical compounds is in essence an experimental one. The purpose of this investigation was (1) to make an experimental determination of the thermodynamic properties of the titanium sulfides (2) to determine what sulfide phases are present in the titanium-sulfur system (3) to show the relationships between the various phases present"--The Problem, Statement of the Problem, page 3.

The Correlation Of Kelly Ball Penetration Readings With Standard Slump Cone Readings For Concrete Made From Missouri Aggregates, James Claude Rives

Masters Theses

"The ASTM standard slump test as set forth in ASTM Designation: C143-52, has been used for many years in concrete construction tor measuring the consistency of plastic concrete. Slump tests taken in the laboratory are considered reasonably accurate; however, there are numerous disadvantages in performing these tests in the field; the most serious being the time required to make a test on pavement work. The standard slump cone method is also subject to personal differences in sampling, rigidity and smoothness of base, dampening the apparatus, filling the cone, rodding, raising the cone, freedom from jarring and selection of point to …

Separation Of Iron-Tin Alloys Using Gas-Solid Reactions, Carl Richard Bieling

Masters Theses

"For years it has been a problem to the tin smelting, plating, and detinning industries to be able to separate iron from tin once they were associated together as described above. Due to the lack of a tin smelter in the United States in the past, and the abundance of tin scrap available, which had little value either for the iron content or the tin content in their untreated state, most interest was concentrated on seeking methods of separating this tin scrap into its two useful components, iron and tin, rather than deal with the problems of smelting tin from …

A Study Of The Variation Of The Fluoride Content Of Certain Waters In The Vicinity Of Albuquerque, E. Metz Beahm

Chemical and Biological Engineering ETDs

In the first part of 1935, the City of Albuquerque was investigating the possibility of obtaining an additional water supply from the Jemez Mountains, which are about fifty miles to the north of the City. Black and Veatch, consulting engineers for the City, were asked to make a complete study of the problem. The question of fluorides in the water came up because it was known that the fluorides would cause mottled enamel in human teeth when the water was used during childhood, if the content was above 0.9 parts per million by accepted fluorine analysis methods. The question arose …

Filter Materials For Emergency Use In Diatomite Type Water Filters, Robert Wassell Mcleane

Masters Theses

"A completely different type of filter, using diatomaceous earth as the filter media, had been in use for many years for filtration of industrial liquids, however, the use of diatomaceous earth for water filtration purposes had been discouraged due to the rapid clogging of the filter material. "As late as 1930 it was reported that the very excellence of filtration with diatomite prevented its extensive use in water filtration except where complete elimination of bacteria and suspended matter is essential.”

Diatomaceous earth, however, seemed to exhibit the general properties the research groups were seeking; in the refined state it exhibited …

Analysis Of Pavement Riding Quality: A Triaxial Evaluation Of Pavement Roughness, William S. Foy

Kentucky Transportation Center Research Report

For the last twenty-five years considerable research has been directed toward developing reliable equipment for evaluating pavement roughness. Since roughness inhibits passenger riding comfort and safety, as well as inducing vehicle deterioration, the determination of the features that cause roughness would indicate possible improvements in pavement design, materials, construction practices and equipment. For example, certain types of base design might be found to produce smoother surfaces than others; and a construction practice such as a blade-spread leveling course might result in more uniform pavements. Then too, evaluation of pavement roughness would permit relative comparison of pavements as one of several …

Liquid-Gas Flow In Venturi Meter And Sharp Edged Orifice, Frank John Chwalek

Theses

The results of a study of pressure drops across a 5/32 inch throat venturi meter and a 5/32 inch thin plate sharp-edged orifice for the horizontal cocurrent, flow of the air-water two-phase two-fluid system in a 3/4 inch pipe under essentially isothermal conditions, are presented. This is the first critical study of two phase flow in a Venturi meter and. in a 5/32" orifice.

Flows of water of 0.1 to 1.7 gallons per minute with air rates in range of 0.00022 lbs/sec. to 0.0092 lbs/sec. of air mixed in were studied. All flows were turbulent when judged with the conventional …

Hydrolysis Of Sodium Silicofluoride, Frank Arthur Graf

Theses

The kinetics of an apparent solubility decrease of commercial sodium fluoride encountered in a piece of equipment designed to produce saturated sodium fluoride solution was Investigated, in order to understand why a consistently saturated solution was not possible to achieve with plain tap water as solvent.

The main impurity, about 1 percent sodium silicofluoride, coats the sodium fluoride crystals, resulting in an equilibrium shift during dissolution of the salt in water; and under certain conditions results in the formation of a protective gel. Therefore, in order to produce a constant strength sodium fluoride solution, this coated impurity must be decomposed …

The Three Phase System N-Hexane - Aniline - Water, Charles S. Potosnak

Theses

This is a study of the three phase system - n-Hexane Aniline - Water at 50° Centigrade. The data obtained, coupled with data previously established at 36° Centigrade is used to predict a means of recovering aniline from 3-5% aqueous solutions by scrubbing with n-hexane.

Ammonia Catalized Phenol Formaldehyde Resins, Murlin Charles Ehrgott

Theses

The literature on ammonia-catalyzed phenol-formaldehyde resins is reviewed and critical comparisons are made of the manner in which the ammonia-catalyzed resins differ from both the alkali- and acid-catalyzed resins.

Intermediate products formea during the initial stapes of the ammonia-catalyzed phenol-formaldehyde reactions, as reported in the literature, are tabulated and % N contents are calculated.

Experimental determinations of N content of resins with molar ratios of 1:1.25 phenol to formaldehyde with ammonia at 0.2, 0.5, and 1.0 moles per mole of phenol, show that at the 0.2 molar ratio of ammonia, all the N enters into the resin and remains during …