Digital Commons Network^™

Portable Food Pasteurization Using Pulsed Electric Fields (Pef), Thomas E. Mcmillan Iii

Electrical Engineering

Foodborne illnesses remain a significant public health concern, motivating continued development of alternative food pasteurization technologies. Pulsed electric field (PEF) treatment is a non-thermal pasteurization method that inactivates microorganisms through electroporation while minimizing thermal degradation of food products. The long-term objective of this project was development of a portable PEF food pasteurization system.

An iterative design approach was used to investigate generation of the high-voltage pulses required for PEF treatment. Multiple pulse forming network topologies were evaluated through simulation, leading to selection of a solid-state Marx generator architecture. A low-voltage five-stage prototype was designed, constructed, and tested to validate the …

A Broadband, Dual Polarized Antenna For The Radio Neutrino Observatory In Greenland, Laken Baker

Electrical Engineering

Neutrinos contain information necessary to determine the origins of the universe and cosmic events because they can travel long distances with minimal interaction, preserving information about their cosmic origins. Since neutrinos interact with ice sheets resulting in RF radiation, antennas have been developed to detect RF transmissions.

A compact 'vane structure' (see Fig. 1a) dual-polarized broadband antenna model has been developed, constructed, and characterized according to input reflection coefficient, and co and cross-pol E and H plane radiation patterns using HFSS and Cal Poly San Luis Obispo’s anechoic chamber for the Radio Neutrino Observatory in Greenland (RNO-G) [1]. Its design …

Wireless Communication In Autonomous Vehicles, Kaylie Bao, Nicholas Andrews, Mark Negus

Electrical Engineering

This project focuses on developing and testing a vehicle-to-everything (V2X) communication system using Dedicated Short Range Communications (DSRC) based on the IEEE 802.11p standard. The system uses the NXP i.MX 8XLite V2X Evaluation Kit, which includes the SAF5400 modem for wireless communication in the 5.9 GHz band.

The main goal of this project was to establish reliable communication between two V2X evaluation boards and to verify that custom, user-defined data could be transmitted between them. Through iterative testing, we were able to successfully send and receive custom 802.11 frames using the provided command-line tools and achieve consistent communication between nodes. …

Vlsi Spike Encoder For Spiking Neural Networks With 4-Bit Sar Adc, Jack Marshall, Wyatt Tack, Cameron Young, Ryken Thompson

Electrical Engineering

A spike encoder forms the interface between sampled data, such as image data or a sensor signal, and a spiking neural network by converting numerical input samples into discrete spike events. Unlike conventional artificial neural networks, spiking neural networks use spare, even-driven computation instead of continuous-valued activations. This makes them attractive for low-power embedded systems, biomedical electronics, and other edge applications where energy consumption, physical area, and thermal limits are important design constraints.

This project develops a modular spike encoder architecture for spiking neural networks with selectable support for temporal, rate, multi-spike, and delta encoding. Prior work has shown that …

Cal Poly Mars Rover Battery Management System, Lawrence Nichols, Caleb Michael King, Thomas Anh Khoa To, Angel Soto

Electrical Engineering

The exploration of space has consistently been one of the most expensive endeavors humanities has undertaken in its journey to expand ever further. The PolyRover project aims to not only cheapen that expense through student-based research but also provide a better bang for buck as more unmanned ground vehicles (UGVs) can be utilized on planets in concert. In order to do so, the rovers need a robust, yet compact battery management system that can fit within the wheel well. Our system will consist of six commercially-available 18650 batteries in series, organized in a hexagonal fashion around the motor. The BMS …

A Near-Field Communication (Nfc) Multi-Sensor Node With Optimized Read Range And Adaptive Power Management For Remote Monitoring, Rishin Patra, Hilary Scott Nkimbeng Cho, Jin W. Choi

Michigan Tech Publications

This paper presents the design of a batteryless near-field communication (NFC) multi-sensor node with an integrated adaptive power-management system for sensing applications. The work focuses on harvesting energy from a 13.56 MHz NFC field to power an ultra-low power sensing platform. The design consists of the TI RF430FRL152H, an integrated NFC transponder with an embedded MSP430 microcontroller core and ferroelectric random-access memory (FRAM) non-volatile memory. The system combines an ISO/IEC 15693 NFC front end, a tuned loop antenna for optimized power harvesting, and multiple analog and digital sensor interfaces, and a firmware architecture for intermittent harvested energy operation. The aforementioned …

Operation Bite Block, Jennifer Aline Robles, Laura Marie Strobbe, William Pearce Graham, Annabelle Katherine Thalken

Mechanical Engineering

Current dental bite blocks, or mouth props, are typically manufactured in fixed sizes, and often result in patient discomfort, reduced procedural efficiency, and the need for dental offices to maintain multiple product sizes. This project sought to design, prototype, and validate an adjustable dental bite block capable of accommodating a wide range of patient mouth openings while maintaining comfort, structural integrity, sterilizability, and operator usability. Working in collaboration with Dr. Alan Latta, a practicing dentist in San Luis Obispo, the design process incorporated stakeholder feedback, patent and market research, engineering analysis, and iterative prototyping to develop a solution that addresses …

An Exploratory Latent Segmentation Approach To Account For Temporally Shifting Parameters In Driver Injury-Severity Models, Tanmoy Bhowmik, Shahrior Pervaz, Fred Mannering, Naveen Eluru

Civil and Environmental Engineering Faculty Publications and Presentations

Temporally shifting parameters in crash severity modeling is a well-documented phenomenon, with growing evidence suggesting that the influence of explanatory variables changes over time due to shifts in driver behavior, vehicle technology, and roadway conditions. Many studies have examined this issue by comparing the temporal stability of adjacent-year data using a variety of modeling frameworks that have often assumed a homogenous effect of explanatory variables across the entire crash population. The current research effort departs from past work in two ways. First, it compares data separated by multiple years (instead of comparing adjacent years), and second, it tests the homogeneous …

Exploiting Underground Mine Topology For Resilient Concurrent Lora Mesh Emergency Communications: Architecture, Protocol Design, And Performance Analysis, Hilary Kelechi Anabi, Samuel Frimpong, Muhammad Azeem Raza

Mining Engineering Faculty Research & Creative Works

Underground mine emergencies compromise fixed communication infrastructure exactly when situational awareness is most critical for effective rescue operations. Existing LoRa mesh protocols fail in underground mines because they ignore the structured topology of tunnel networks, specifically the waveguide effect along straight galleries, severe signal discontinuity at junctions, and the dead-end geometry of working faces. This paper presents the Topology-Aware Concurrent LoRa (TACL) mesh protocol, in which each node autonomously infers its structural role from local RF observations and packet header information, without GPS, pre-loaded mine maps, or central coordination. Role classification resolves the contender estimation problem (Formula presented.) left open …

Mechanism-Based Assessment Of Respirable Dust Exposure In Miners: Integrating Cfd-Dpm Simulation With Personalized Monitoring For Occupational Health Risk, Jiajun An, Fan Geng, Yuqing Feng, Changgeng Gui, Shihang Li, Xinjian He, Guang Xu, Zheng Zhang, Yibao Wang

Mining Engineering Faculty Research & Creative Works

Respirable dust in confined mine environments represents a significant environmental and occupational health challenge, requiring advanced monitoring and risk assessment methodologies. Current area-level monitoring overlooks the heterogeneity of personal exposure fields and the critical influence of human-ventilation interactions on local contaminant dispersion. This study develops an integrated monitoring-simulation method to quantify multi-worker dust exposure, assessing how worker position and orientation modulate risk under forced ventilation in narrow roadways. Occupational-specific dust sampling provided validation data for a three-dimensional Computational Fluid Dynamics-Discrete Phase Model (CFD-DPM) incorporating human-ventilation interactions. The model integrates a MATLAB-developed breathing function to dynamically couple respiratory cycles with particle …

Deep Learning For Affect Recognition: A Comparative Study Of Physiological Sensor-Based And Facial Image-Based Approaches, Ravi Panchal, Ravi Panchal

Master's Theses

This thesis investigates deep learning approaches for affect recognition using wearable physiological signals and facial image data. The sensor-based component evaluates stress and affect recognition on the WESAD dataset using wrist-based physiological windows and examines multiple temporal modeling strategies, including convolutional, recurrent, hybrid CNN-LSTM, attention-based, ensemble, and time-frequency approaches.

The image-based component evaluates hard-label facial expression recognition on AffectNet+ using pre-trained ResNet-50, EfficientNet-B3, and ConvNeXt-Tiny architectures across Easy, Challenging, and Difficult subsets representing different levels of expression ambiguity.

Experimental results show that the proposed Multi-Branch Attention CNN-BiLSTM (MBA-CNN-BiLSTM) model achieves the strongest wearable stress- and affect-recognition performance among the evaluated …

Reproducing And Evaluating Charger Surfing: Robustness Of Smartphone Charging-Line Side-Channels, Colby M. Watts

Master's Theses

Smartphones are frequently connected to external, untrusted charging hardware, creating opportunities for side-channel attacks that do not require malware or direct access to device data. Charger Surfing, a recently proposed charging-line power analysis side-channel attack, reported high accuracy in inferring touchscreen input from voltage measurements collected from a smartphone’s charging cable; however, the reproducibility and robustness of these results under different conditions remain unclear. This thesis presents an independent replication and evaluation of Charger Surfing, including the development of an end-to-end data collection pipeline consisting of a modified charging cable, oscilloscope-based recordings, custom Android app, automated trace processing, and convolutional …

Research And Assessment Of Needs For Sign And Signal Maintenance, Megan White, Eric Green

Kentucky Transportation Center Research Report

Kentucky Transportation Cabinet (KYTC) sign and signal crews have expressed multiple concerns related to compensation, expertise, and having the financial and personnel resources needed to help the agency comply with Manual on Uniform Traffic Control Devices (MUTCD) guidelines while continuing to perform routine job duties. Internal reorganizations and personnel changes have reduced staffing and budgets available to underwrite the activities of sign and signal crews even as workloads have remained steady or increased. To document the challenges facing sign and signal crews and associated engineering staff, Kentucky Transportation Center (KTC) researchers administered a statewide survey. Respondents gave their perspectives on …

Building And Facility Asset Inventory Assessment And Maintenance, Catherine Keathley, Bethany Paris, Jon Wilcoxson

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC) manages approximately 1,500 buildings statewide, including facilities such as office buildings, maintenance and equipment garages, and storage sheds. Because managing buildings and properties requires considerable effort, agency decision makers need reliable monitoring and management tools that generate and organize data which can be used to determine the best course of action for facility maintenance and replacement. In addition to assessing the Cabinet’s building inventory, this report advances recommendations to improve the collection, management, and reporting of facility-related data. Assessment of the inventory managed by KYTC included geolocation of all properties and the buildings therein. Once …

Rehab Mechanics, Sierra Spierling, Nicole Garcia, Joel Gonzalez, Diana Garcia-Becerra, Mia Kwan

Mechanical Engineering Senior Theses

Stroke survivors often struggle to regain grip strength and hand mobility due to limited access to physical therapy, lack of progress tracking during independent rehabilitation sessions, and reduced motivation from slow or unmeasured progress. There is a need for more effective rehabilitation approaches, as current at-home strengthening tools do not provide quantitative feedback or adjustable resistance, and clinical devices are expensive. This makes it challenging for patients and their physical therapists to guide recovery and monitor improvement effectively. To address these obstacles, we developed a low-cost, customizable grip-strengthening device that tracks patient progress and assists in regaining strength and mobility …

Bowl-O-Matic, Nathan Lin, Luis Torres, Jill Worthington, Aiden Foote

Mechanical Engineering

Adaptive physical education presents the unique challenge of accommodating individuals with diverse physical and cognitive abilities. Instructors and program designers must often integrate specialized equipment, fixtures, or features to ensure activities remain safe, inclusive, and user-friendly. Beyond accessibility, adaptive physical education highlights the importance of empowerment— enabling every participant to experience personal growth, confidence, and connection through movement. Friday Club, a local San Luis Obispo program supported by Cal Poly’s Kinesiology Department, embodies these values by providing adaptive physical activities that promote health and well-being for individuals with varying abilities. One of the most popular and regularly held activities is …

Low-Cost Path-Loss Characterization For Underground Mine Tunnels Using Lora Transceivers At 915 Mhz, Hilary Kelechi Anabi, Samuel Frimpong, Muhammad Azeem Raza

Mining Engineering Faculty Research & Creative Works

Accurate path-loss models are essential for planning reliable wireless networks in underground mines, yet existing characterization studies rely on specialized channel sounders and vector network analyzers costing tens of thousands of dollars, placing them beyond the reach of most mine operators. This paper demonstrates that LoRa transceivers costing approximately US $15 per node can serve as a self-contained path-loss measurement instrument, logging the received signal strength indicator (RSSI) and signal-to-noise ratio (SNR) directly to a CSV file over a standard USB serial connection. A measurement campaign conducted at the Missouri S&T Experimental Mine on 31 March 2026 collected 4801 packets …

Effect Of Allocation And Allocation Avoidance Methods On Life-Cycle Impact Results For Tellurium Production From Copper Anode Slimes, Ioanna Paschalidou, Kwame Awuah-Offei, Michael Moats

Mining Engineering Faculty Research & Creative Works

The global transition toward green energy has increased demand for metals and intensified the need for sustainable supply sources. Tellurium (Te), an essential metal for photovoltaics technology, is produced primarily as a by-product of copper refinery slimes treatment. This study conducts a life-cycle assessment (LCA) study of Te production to investigate the effect of environmental impact allocation choices on LCA results in multi-product metal systems. A cradle-to-gate LCA model of the Te product system was developed in SimaPro v9.5.0.1 software by combining industrial data, Ecoinvent v3.7.1 datasets, and literature information. Environmental impacts were quantified using the ReCiPe v1.04 Midpoint method …

Western Kentucky University Stormwater Utility Survey 2026, Warren Campbell

SEAS Faculty Publications

In the U.S., more than 2200 stormwater utilities have been enacted. This year, we have expanded the survey to include stormwater utilities in other countries. Many of these stormwater assessments are called taxes, but if the assessment is recurring, is not an ad valorem tax, and is dedicated to stormwater purposes, we call it a stormwater utility. With the help of ChatGPT we have been able to identify 25 stormwater fees in Australia. We were also able to identify 3 in New Zealand, and some in Europe as well.

Leveraging Ict Adoption And Electricity Access For Sustainable Agricultural Productivity Among Nigerian Households, Menghan Huang, Qin Chen, Oluwayemisi Kadijat Adeleke, Mamdouh Abdulaziz Saleh Al-Faryan

The Philippine Agricultural Scientist

This study investigated ICT adoption (mobile phone and internet usage), access to electricity, and their impact on household agricultural productivity in Nigeria, Africa’s largest economy. Utilizing Wave 4 (2018 to 2019) Living Standards Measurement Study–Integrated Survey on Agriculture (LSMS–ISA) data covering 4,980 household heads, this study applied logit regression and Propensity Score Matching (PSM) for estimation, alongside a Cobb-Douglas production function to analyze input contributions to agricultural output. The findings revealed that the age, residential location, educational level, and access to electricity of household heads significantly determine technology adoption among farming households. Furthermore, ICT adoption exhibits a significant, positive relationship …

Matlab Shake Table Control And Data Acquisition System, Abigail Austin

Architectural Engineering

The College of Architecture and Environmental Design’s (CAED) seismic laboratory shake table is used for earthquake engineering education and experimental testing. However, the existing control system is outdated and difficult for students unfamiliar with the system to operate. The objective of this project was to develop a MATLAB-based control and data acquisition application to simplify shake table operation and improve accessibility, of both operation and output, for student users.

The developed application imports earthquake acceleration records, scales the input motions to the operational limits of the shake table, and executes the desires motion through the existing hardware system. Experimental data …

Electrically Evoked Emg Decomposition Using The Perturbative Generalized Series Expansion, William R. Walker

Master's Theses

Electrically evoked electromyography records the muscle's response to nerve stimulation and has been used for clinical assessment of neuromuscular function, as well as treatments such as functional electrical stimulation or stroke rehabilitation. In every muscular contraction, an electrical signal is generated. These signals come from the summation of simultaneously recruited motor units, enabling decomposition techniques to reveal information about motor unit recruitment.  By improving the ability to decompose and analyze these signals, clinical treatments involving neuromuscular electrical stimulation can be optimized and better understood. Much of the research on EMG analysis focuses on voluntary EMG, leaving a gap in the …

Vision-Guided Motion Planning For Autonomous Catch With A Robotic Arm, Kayla Go-Oco, Ashik K. Islam, Raegan Gritzmacher

Electrical Engineering

Modern robotic systems are often evaluated using static and highly controlled tasks, such as pick-and-place demonstrations, which do not fully represent the uncertainty and adaptability required in real-world environments. A major challenge in robotics research is enabling robotic systems to perceive, track, and respond to dynamic objects in real time while maintaining accurate and reliable motion control. This project addresses these challenges by developing an autonomous robotic platform in which an OpenMANIPULATOR-Y robotic arm detects, tracks, and attempts to catch a moving tennis ball using a vision-guided control system. The system integrates YOLO-based object detection with an Intel RealSense D455 …

Teaching Learning Newsletter Vol 6 Issue 1, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Emerging Biomaterials For Next-Generation Wound Healing: From Infection Control To Tissue Regeneration, Unqa Mustafa, Aiman Kaleem, Syeda Zunaira Bukhari, Hamna Riaz, Maryam Iftikhar, Muhammad Usman Munir, Xianghao Xiao, Mingwu Shen, Xiangyang Shi, Mostafa Yazdi, Ayesha Ihsan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Wound healing is a multifactorial biological process that regenerates damaged tissues through a series of molecular and cellular events in a coordinated manner. An interruption in this cascade can lead to impaired healing, especially in diabetic complications, where effective treatment is crucial for controlling infections and promoting tissue regeneration. Recent advances in bioengineering and digital health have catalyzed the development of next-generation wound therapies capable of actively modulating the wound microenvironment, promoting regeneration, and enabling real-time clinical assessment. This review summarizes the fundamentals of physiological wound healing and highlights the significant developments in biomaterial dressings and scaffolds, 3D bioprinting, as …

Evaluation Of The Effect Of Vibration On Signal Reflection In Coaxial Cable Connectors For Vibration Sensing In Aircraft Structures And Systems, Saidanvar Esanjonovich Valiev, Anthony C. Okafor, Jeremiah J. Rittenhouse, Daniel S. Stutts, Jie Huang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper investigates the effects of vibration on signal reflection (S11) in aerospace data transmission line (ADTL) and commercial data transmission line (DTL) connectors for their alternative use as vibration sensors. The impact of vibration on the S11 signal was investigated on five ADTL and four DTL connectors at six vibration frequencies (20 Hz, 40 Hz, 80 Hz, 160 Hz, 320 Hz, and 640 Hz) and four vibration accelerations (0.5G, 1 G, 2 G, and 4G). The experiment was conducted using a split-plot design with a cable type assigned as the main-plot factor, with vibration frequency and acceleration as subplot …

Eliminating Barriers For The Implementation Of Automation In The Mining Industry, Sefiu O. Adewuyi, Kray Luxbacher, Kanagy David, Miller Ben, Miller Hugh, Michael Moats, Savit Mark

Materials Science and Engineering Faculty Research & Creative Works

The integration of new technologies into U.S. mining operations is necessary for achieving continuous improvement in worker health and safety, as well as improving operational efficiency, but many have questioned why uptake of autonomy in the U.S. mining industry has been slow compared to other nations. Despite extensive research on mining automation, there remains a critical gap in understanding and systematically identifying the barriers to its adoption within the U.S. mining industry and globally. To quantify these barriers, a workshop model of data collection was employed. A total of 708 invitations were extended to professionals to participate in nine different …

Robotic-Assisted Pedicle Screw Placement Achieves High Accuracy And Narrows The Experience Gap: A Preclinical Evaluation, Anna T. Reza, Matthias Walper, Mitchell K. Ng, Paul G. Mastrokostas, Andrew S. Lee, Rafael G. Rafael, Kornelis A. Poelstra, Ratliff K. John, Rajiv K. Sethi, Michael A. Mont

Rothman Institute Papers

To assess a robotic-assisted system versus open manual techniques to: (1) compare pedicle screw accuracy between fellows and attendings with and without robotic assistance, and (2) evaluate executed versus planned trajectory fidelity relative to prior reports. Robotic-assisted spine systems aim to improve the accuracy, reproducibility, and safety of pedicle screw placement. Limited evidence compares outcomes across differing surgeon experience levels. A total of 255 thoracolumbar pedicle screws were placed in synthetic torsos simulating adult degenerative anatomy. Four surgeons (two fellows, two attendings) each placed half their screws using open fluoroscopy-guided techniques and half using a minimally invasive percutaneous approach with …

Project Strata, Hobbs Hegedus, Antony Chen, Adrian Scancich, Peter Constantine Psefteas, Ryan Kreis Roth, Jack Douglas Mitchell

Mechanical Engineering

Project STRATA is a lunar sample acquisition and storage system developed in support of NASA’s Artemis mission objectives and the 2026 NASA RASC-AL competition. The overall mission concept utilizes a dual-rover architecture consisting of HARVEST, a sample collection rover, and SILO, a storage rover designed to preserve and organize lunar ice-regolith core samples collected from permanently shadowed regions (PSRs) near the lunar south pole. These regions contain scientifically valuable volatile-rich materials but present significant challenges due to extreme cryogenic temperatures, abrasive lunar regolith, and the absence of solar energy.

This report is a collection of all major work from the …

Peltier-Based Hydration Accumulation Terminal (P.H.A.T.), Jenner Mucher, Ethan Pace, Renee Robolledo, Sabrina Luo, Taehoon Lee, Tarsem Pal

Mechanical Engineering

The objective of this project is to design an innovative potable water dispenser capable of safely delivering hot, ambient, and chilled water on demand for human lander missions. The system will support astronauts’ hydration and food rehydration needs while minimizing mass, power, maintenance, and contamination risks in microgravity and partial-gravity environments. Current spacecraft dispensers, such as the International Space Station (ISS) system, provide only heated water and have limited temperature control, cleaning accessibility, and microbial resilience. Building on NASA heritage designs and lessons learned from the ISS Potable Water Dispenser, this project advances a lighter, simpler, and more energy-efficient concept …