Digital Commons Network^™

Compiler Assisted Cache Prefetch Using Procedure Call Hierarchy, Sheela A. Doshi

LSU Master's Theses

Microprocessor performance has been increasing at an exponential rate while memory system performance improved at a linear rate. This widening difference in performances is increasingly rendering advances in computer architecture less useful as more instructions spend more time waiting for data to be fetched from the memory after a cache miss. Data prefetching is a technique that avoids some cache misses by bringing data into the cache before it is actually needed. Different approaches to data prefetching have been developed, however existing prefetch schemes do not eliminate all cache misses and even with smaller cache miss ratio, miss latency remains …

Electronic Data Discovery: Integrating Due Process Into Cyber Forensic Practice, John W. Bagby, John C. Ruhnka

Journal of Digital Forensics, Security and Law

Most organizations and government agencies regularly become engaged in litigation with suppliers, customers, clients, employees, competitors, shareholders, prosecutors or regulatory agencies that nearly assures the need to organize, retain, find and produce business records and correspondence, emails, accounting records or other data relevant to disputed issues. This article discusses some high visibility cases that constrain how metadata and content is routinely made available to opposing parties in civil litigation, to prosecutors in criminal prosecutions and to agency staff in regulatory enforcement litigation. Public policy, as implemented in the rules of evidence and pretrial discovery, restrict electronic data discovery (EDD) as …

A Fast Parallelized Computational Approach Based On Sparse Lu Factorization For Predictions Of Spatial And Time-Dependent Currents And Voltages In Full-Body Biomodels, Ashutosh Mishra, Ravindra P. Joshi, Karl H. Schoenbach, C. D. Clark Iii

Electrical & Computer Engineering Faculty Publications

Realistic and accurate numerical simulations of electrostimulation of tissues and full-body biomodels have been developed and implemented. Typically, whole-body systems are very complex and consist of a multitude of tissues, organs, and subcomponents with diverse properties. From an electrical standpoint, these can be characterized in terms of separate conductivities and permittivities. Accuracy demands good spatial resolution; thus, the overall tissue/animal models need to be discretized into a fine-grained mesh. This can lead to a large number of grid points (especially for a three-dimensional entity) and can place prohibitive requirements of memory storage and execution times on computing machines. Here, the …

Wavelet Analysis In Virtual Colonoscopy, Sharon Greenblum, Jiang Li, Adam Huang, Ronald M. Summers, Armando Manduca (Ed.), Amir A. Amini (Ed.)

Electrical & Computer Engineering Faculty Publications

The computed tomographic colonography (CTC) computer aided detection (CAD) program is a new method in development to detect colon polyps in virtual colonoscopy. While high sensitivity is consistently achieved, additional features are desired to increase specificity. In this paper, a wavelet analysis was applied to CTCCAD outputs in an attempt to filter out false positive detections. 52 CTCCAD detection images were obtained using a screen capture application. 26 of these images were real polyps, confirmed by optical colonoscopy and 26 were false positive detections. A discrete wavelet transform of each image was computed with the MATLAB wavelet toolbox using the …

Hybrid Committee Classifier For A Computerized Colonic Polyp Detection System, Jiang Li, Jianhua Yao, Nicholas Petrick, Ronald M. Summers, Amy K. Hara, Joseph M. Reinhardt (Ed.), Josien P.W. Pluim (Ed.)

Electrical & Computer Engineering Faculty Publications

We present a hybrid committee classifier for computer-aided detection (CAD) of colonic polyps in CT colonography (CTC). The classifier involved an ensemble of support vector machines (SVM) and neural networks (NN) for classification, a progressive search algorithm for selecting a set of features used by the SVMs and a floating search algorithm for selecting features used by the NNs. A total of 102 quantitative features were calculated for each polyp candidate found by a prototype CAD system. 3 features were selected for each of 7 SVM classifiers which were then combined to form a committee of SVMs classifier. Similarly, features …

Use Of Polyhydroxyalkanoates For Denitrification In Recirculating Aquaculture Systems, Maria Teresa Gutierrez-Wing

LSU Doctoral Dissertations

Increasing demand of aquacultural products is driving the industry toward more intensive culture practices. Aquacultural operations are constrained by limitations on the availability high quality waters and regulatory pressures on the discharges. Recirculating systems can address these issues by reducing the amount of water required in the operation. Closed systems are especially suited where biosecurity is important. In closed systems, nitrate accumulates, limiting the time the water can be reused. In marine inland systems, water reuse reduces the cost of salt for make up water. To increase the water reuse time, some form of nitrate removal process must be incorporated …

Design And Test Of A Displacement Workspace Mapping Station For Articular Joints, Michael Daly Guillet

LSU Master's Theses

In 2003, 267,000 Americans received total knee replacements prohibiting high impact athletics for the remainder of a patient’s life. A better understanding of the movement and constraint of the knee is necessary to provide more realistic motion of or possibly eliminate the need for joint prosthetics. Fixed Orientation Displacement Workspaces (FODW) can be applied to study the relationship of the passive constraint system and six (6) degree of freedom (DOF) movement of the human knee. A FODW consists of the volume of possible positions the tibia/fibula can occupy relative to a fixed femur without changing the relative orientation of the …

Reproducing Published Results From In Silico Computer Models Of The Acute Inflammatory Response To Severe Sepsis, Wayne W. Wakeland, Joe Fusion, Brahm Goldstein

Complex Systems Faculty Publications and Presentations

Recent studies describe computer simulation models of the acute or systemic inflammatory response (AIR or SIR) to severe sepsis, a condition that can lead to multiple organ failure and death. One study used an agent-based model, while the other used differential equations (DEs) to simulate a randomized clinical trial. Both studies obtained results similar to the actual results from a successful clinical drug trial of severe sepsis, suggesting that in silico (simulated) randomized clinical trials may be used to design more effective in vivo clinical trials.

Joint Optimization In Capacity Design Of Networks With P-Cycle Using The Fundamental Cycle Set, Hoang Nguyen, Daryoush Habibi, Viet Q Phung, Stefan Lachowicz, Kungmang Lo, Byung Kang

Research outputs pre 2011

We propose a joint optimization model for capacity design of networks with p-cycles. The model is based on a modified definition of network fundamental cycles and the available straddling links. Concepts about visible and hidden straddling links, which are essential components of our model are also introduced. This is the first ILP model for joint optimization of p-cycle network that can be solved without enumerating p-cycle candidates, and has the ability to achieve optimum solutions. In addition, the complexity of our proposed model is much smaller than any conventional models, particularly when applying to a planar network. This model is …

A Hybrid P-Cycle Search Algorithm For Protection In Wdm Mesh Networks, Kungmang Lo, Daryoush Habibi, Alexander Rassau, Quoc Viet Phung, Hoang Nguyen, Byung Kang

Research outputs pre 2011

p-Cycle is a type of shared link protection for survivable wavelength-division multiplexing (WDM) mesh networks. p-Cycle not only retains ring-like restoration speeds, but also achieves capacity efficiency in mesh networks. However, finding the optimal set of p-cycles to protect all traffic demands within a reasonable response time is difficult. This is particularity true with dense meshes or large networks, because the number of candidates is huge. Generally, p-cycles are determined by using either Integer Linear Programming (ILP) or specifically designed heuristic algorithms. However, both methods need a set of efficient candidate cycles to tradeoff between the computational time and the …

Efficient P-Cycle Design By Heuristic P-Cycle Selection And Refinement For Servivable Wdm Mesh Networks, Kungmang Lo, Daryoush Habibi, Quoc Viet Phung, Alexander Rassau, Hoang N. Nguyen

Research outputs pre 2011

Using p-Cycles to protect against single span failures in Wavelength-Division Multiplexing (WDM) networks has been widely studied. p-Cycle retains not only the speed of ring-like restoration, but also achieves the capacity efficiency over mesh networks. However, in selecting an optimal set of p-cycles to achieve the minimum spare capacity and fast computational time is an NP-hard problem. To address this issue, we propose a heuristic approach to iteratively select and refine a set of p-cycles, which contains two algorithms: the Heuristic p-Cycle Selection (HPS) algorithm, and the Refine Selected Cycles (RSC) algorithm. Our simulation results show that the proposed approach …

A Segmentation Method For Shared Protection In Wdm Networks, Quoc Viet Phung, Daryoush Habibi, Hoang Nguyen, Kungmeng Lo

Research outputs pre 2011

Shared link and shared path protections have been recognized as preferred schemes to protect traffic flows against network failures. In recent years, another method referred to as Shared Segment Protection has been studied as an alternative solution for protection. This method is more flexible and efficient in terms of capacity utilization and restoration time. However, to our best knowledge, this method has mostly been studied in dynamic provisioning scenarios in which searching for restoration paths is dynamically performed after a failure has occurred. In this paper, based on the path segmentation idea, we propose a method to generate good candidate …

High-Speed (2.5 Gbps) Reconfigurable Inter-Chip Optical Interconnects Using Opto-Vlsi Processors, Muhsen Aljada, Kamal Alameh, Yong Lee, Il-Sug Chung

Research outputs pre 2011

Reconfigurablele optical interconnects enable flexible and high-performance communication in multi-chip architectures to be arbitrarily adapted, leading to efficient parallel signal processing. The use of Opto-VLSI processors as beam steerers and multicasters for reconfigurable inter-chip optical interconnection is discussed. We demonstrate, as proof-of-concept, 2.5 Gbps reconfigurable optical interconnects between an 850nm vertical cavity surface emitting lasers (VCSEL) array and a photodiode (PD) array integrated onto a PCB by driving two Opto-VLSI processors with steering and multicasting digital phase holograms. The architecture is experimentally demonstrated through three scenarios showing its flexibility to perform single, multicasting, and parallel reconfigurable optical interconnects. To our …

Opto-Vlsi-Based Correlator Architecture For Multiwavelength Optical Header Recognition, Muhsen Aljada, Kamal E. Alameh, Khalid Al-Begain

Research outputs pre 2011

A novel optical correlator employing an opto-very-large-scale-integration (VLSI) processor to construct the routing lookup table, in conjunction with an array of fiber Bragg gratings (FBGs) for multiwavelength optical header recognition is demonstrated. The FBG array provides wavelength-dependent time delays, whereas the opto-VLSI processor generates wavelength intensity profiles that match arbitrary bit patterns. The recognition of 4-b optical patterns is experimentally demonstrated at 2.2 Gb/s by showing that the correlator produces an autocorrelation waveform of high peak whenever the input bit pattern matches the wavelength intensity profile.

Catastrophic And Parametric Fault Modelling For Photonic Systems, Muhsen Aljada, Adam Osseiran, Kamal Alameh

Research outputs pre 2011

In this paper, we investigate the impact of the most common catastrophic and parametric faults in photonic systems. We demonstrate, using the example of a photonic correlator, the effectiveness of testing techniques for fault detection in photonic systems. To the best of our knowledge, this constitutes the first attempt to define a fault model and to develop a test methodology for photonic systems.

Distributed Wireless Optical Communications For Humanitarian Assistance In Disasters, Muhsen Aljada, Kamal Alameh, Khalid Al-Begain

Research outputs pre 2011

We propose an optical wireless communication network architecture employing an all-optical central communication unit and optical transceiver units. The network can easily be installed when communication network facilities are partially damaged by a disaster. The network performance is simulated at 1Gbit/s, over 1km under different weather conditions.

Performance Analysis Of Gb/S Wdm Fddi Network, Muhsen Aljada, Kamal Alameh, Khalid Al-Begain

Research outputs pre 2011

In this paper, we propose a time-token multi-Gb/s Wavelength Division Multiplexing Fibre Distributed Data Interface (WDM/FDDI) architecture and examine its throughput efficiency and delay under heavy load for different network configuration using discrete event simulator.

Dynamic Optical Comb Filter Using Opto-Vlsi Processing, Zhenglin Wang, Kamal Alameh, Rong Zheng, Chung Poh

Research outputs pre 2011

Reconfigurable multi-channel optical filters are presented in this paper. The operation principle of the reconfigurable filter is based on the dynamic beam steering capacity of Opto-VLSI processor in conjunction with a high dispersion free space grating. The dispersion grating separates the input signal spectrum while the Opto-VLSI processor is driven by optimised phase holograms to dynamically select the wavelengths to be coupled into the output port. Experimental results show that up to 8 bands can be synthesised, with a wavelength tuning span of 10 nm and a 3dB bandwidth less than 0.5nm.

Reconfigurable Photonic Rf Filter Based On Opto-Vlsi Processing, Rong Zheng, Kamal Alameh, Zhenglin Wang

Research outputs pre 2011

In this paper, a novel reconfigurable 5-tap photonic RF filter based on Opto-VLSI processor is proposed where an Opto-VLSI processor is used in conjunction with a 5-fibre Bragg grating (FBG) array to slice the spectrum of a broad band light source, thus achieving commensurate true-time delays and variable tap weights. The proposed photonic RF filterstructure is experimentally demonstrated by means of several examples which show the capability of the Opto-VLSI processor to synthesise transversal RF filter responses with adaptive weights.

Magnetic Photonic Crystals: 1-D Optimization And Applications For The Integrated Optics Devices, Mikhail Vasiliev, Kamal E. Alameh, Vladimir I. Belotelov, Vyacheslav A. Kotov, Anotoly K. Zvezdin

Research outputs pre 2011

The optimization of multilayer one-dimensional (1-D) magnetophotonic crystals (MPCs) with multiple phase shifts, enabling their design to be tailored to practical photonics applications, is reported. The properties of sample optimized structures suitable for application in infrared intensity modulators are discussed. A novel scheme of high-resolution magnetic field sensing using MPCs is proposed. The effect of material absorption on spectral properties is shown.

Demonstration Of Tunable Optical Notch Filter Using 1-D Opto-Vlsi Processor, Chung Kiak Poh, Kamal Alameh, Zhenglin Wang

Research outputs pre 2011

An opto-very-large-scale-integrated (opto-VLSI)-based tunable optical filter structure is demonstrated. Filter tunability is achieved by reconfiguring the holographic diffraction grating of an opto-VLSI processor, allowing virtually any type of filter response to be synthesized. A proof-of-concept tunable notch filter with wavelength span of 7 nm is experimentally verified

Improving The Steering Efficiency Of 1x4096 Opto-Vlsi Processor Using Direct Power Measurement Method, Chung Poh, Kamal Alameh

Research outputs pre 2011

We report optimization of the steering efficiency of the 1-D Opto-VLSI processor using direct power measurement method for wavelengths in the near-IR and 632 nm. Highest improvement observed for the signal and interport isolation is 8 dB and 12 dB respectively. This improved performance of the processor is crucial to the realization of low crosstalk reconfigurable optical add/drop multiplexers (ROADM) using Opto-VLSI processors.

Effect Of Oblique Light Incidence On Magnetooptical Properties Of One-Dimensional Photonic Crystals, Mikhail Vasiliev, Vladimir I. Belotelov, Andrey N. Kalish, Vyacheslav A. Kotov, Anotoly K. Zvezdin, Kamal Alameh

Research outputs pre 2011

We have investigated the magnetooptical properties of one-dimensional magnetic photonic crystals for the case of oblique light incidence. We developed a theoretical model based on the transfer matrix approach. We found several new effects such as transmittance resonance peak shift versus external magnetic field and the Faraday effect dependence on the incidence angle.We discuss several possible one-dimensional magnetic photonic crystals applications for the optical devices.

Locating 1-D Bar Codes In Dct-Domain, Alexander Tropf, Douglas Chai

Research outputs pre 2011

Today's digital cameras and camera phones allow users to capture bar codes, which are used to uniquely identify consumer product. In this paper a fast algorithm is proposed that locates a 1-D bar code in the DCT-domain of a bar code image taken by a digital camera. The algorithm uses the DCT-transform properties to distinguish bar code from other texture, morphological operations to smooth the detected bar code area and the features of the extracted area lo detect position and orientation of a bar code in the image

The Girl Scout Climbing Wall Multidisciplinary Service-Learning Project, Margaret Pinnell, Corinne M. Daprano, Gabrielle Williamson

Mechanical and Aerospace Engineering Faculty Publications

The Girl Scout Wall (GS Wall) project was implemented in two classes at the University of Dayton (UD): a Mechanical and Aerospace Engineering (MAE) course, and a Health and Sports Science (HSS) course, and Sport Facility Management. The MAE course, Introduction to Materials, is a three-credit, third-year required course where students learn about the basic structure and properties of materials as well as the principles of material selection. The Sport Facility Management course is a three-semester hour, required HSS course where students are introduced to the processes of planning, constructing, equipping, maintaining, and managing sport facilities.

Comparison Of Combustion Sources And Measurement Techniques For Particulates Emitted From Engines And A Power Plant, Matthew F. Chandler

Masters Theses

"Sub-micron particulates emitted from various combustion sources have serious negative impacts on human health and the environment. It is essential to accurately characterize the physical properties of these particulates including size, shape, structure, and chemical composition in order to monitor, regulate, and model the various transport, toxic, optical, chemical, and deposition properties which dictate their harmful effects. This study consists of two related investigations involving the application of diagnostics methods to characterization and comparison of combustion generated particulate emissions from various sources. The first investigation includes the measurement of particulates emitted from a compression-ignition (diesel) engine using two independent measurement …

Database Anonymization Services, Chad B. Meador

Graduate Theses, Dissertations, and Problem Reports (ETD)

The progress of technology and the development of powerful databases have made it possible to store and easily access continually increasing amounts of sensitive data about people. Since personal information is becoming common in many different databases, it is vital that this data be hidden to ensure privacy of the individuals whose records are stored in these repositories. Database anonymization is the key to securing these databases by ensuring that database users will be unable to reveal sensitive personal information by intelligently structuring their queries.

We analyzed the structure of the BiomData database which contains images and sound recordings of …

Shear Band Evolution In Zr/Hf-Based Bulk Metallic Glasses Under Static And Dynamic Indentations, Hongwen Zhang

Dissertations, Master's Theses and Master's Reports - Open

Bulk metallic glasses (BMGs) exhibit superior mechanical properties as compared with other conventional materials and have been proposed for numerous engineering and technological applications. Zr/Hf-based BMGs or tungsten reinforced BMG composites are considered as a potential replacement for depleted uranium armor-piercing projectiles because of their ability to form localized shear bands during impact, which has been known to be the dominant plastic deformation mechanism in BMGs. However, in conventional tensile, compressive and bending tests, limited ductility has been observed because of fracture initiation immediately following the shear band formation. To fully investigate shear band characteristics, indentation tests that can confine …

Postharvest Treatment To Control Codling Moth In Fresh Apples Using Water Assisted Radio Frequency Heating, Shaojin Wang, Sohan Birla, J. D. Hansen

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Apples destined for export to Japan and South Korea are currently disinfested for codling moth, Cydia pomonella L. (Lepidoptera: Tortricidae), using methyl bromide fumigation. Restrictions and limitations imposed on the uses of methyl bromide have increased interest in developing alternative non-chemical quarantine treatments. It is imperative that the treatment is effective against codling moth yet maintains the quality of treated apples. The present study explored the application of radio frequency (RF) energy in conjunction with conventional hot water treatment to develop feasible heat treatments. Treatment parameters were selected based on minimum time–temperature conditions required for 100% mortality of fifth-instar codling …

Feasibility Study For Bicycle Safety: Data Assessment And Network Evaluation, Michael Seth Klobucar, Jon D. Fricker

JTRP Technical Reports

Bicycles offer a promising transportation alternative to private motor vehicles, especially in areas with congestion, poor air quality, and high fuel prices. This study sought rational methods for evaluating the benefits of incorporating bicycle-friendly features into highway project designs. Data on recent bicyclist fatalities and other collisions involving bicyclists in Indiana were analyzed to determine factors that could help to explain the incidents and offer insights into countermeasures or remedies. Human error – on the part of the bicyclist or the motorist – was found to be the most common factor. Poor lighting and noncompliance with sidewalk ordinances also were …