Digital Commons Network^™

Statistical Hypothesis Testing Under Interval Uncertainty: An Overview, Vladik Kreinovich, Hung T. Nguyen, Sa-Aat Niwitpong

Departmental Technical Reports (CS)

An important part of statistical data analysis is hypothesis testing. For example, we know the probability distribution of the characteristics corresponding to a certain disease, we have the values of the characteristics describing a patient, and we must make a conclusion whether this patient has this disease. Traditional hypothesis testing techniques are based on the assumption that we know the exact values of the characteristic(s) x describing a patient. In practice, the value X comes from measurements and is, thus, only known with uncertainty: X =/= x. In many practical situations, we only know the upper bound D on the …

2007 Scholars And Artists Bibliography, Michael Schwartz Library, Cleveland State University, Friends Of The Michael Schwartz Library, Joanne E. Goodell Ph.D.

Scholars and Artists Bibliographies

This bibliography was created for the annual Friends of the Michael Schwartz Library Scholars and Artists Reception, recognizing scholarly and creative achievements of Cleveland State University faculty, staff and emeriti. Dr. Joanne Goodell was the guest speaker.

The Effect Of Tibiofemoral Loading On Proximal Tibiofibular Joint Motion, Jacob Scott, Ho Lee, Wael Barsoum, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

The human proximal tibiofibular joint (PTFJ) and its relationship to overall knee joint mechanics have been largely unexplored. This study describes force/displacement data from experiments done on four human cadaveric knee specimens and general conclusions obtained with the help of a statistical modeling technique. Specimens were rigidly affixed at the tibia to a force plate and the femur was attached to a custom made device allowing for manual load application. Motion of the fibular head was tracked relative to the tibial plateau by means of reflective markers and a high speed digital camera synchronized with the force plate data stream. …

Bs News

Building Services Engineering

No abstract provided.

Wireless Power Transmission To A Buried Sensor In Concrete, Khan M.Z. Shams, Mohammod Ali

Faculty Publications

The feasibility of sending wireless power to a buried sensor antenna within concrete was studied. a receive patch rectenna with 75.8% conversion efficiency was designed for operation at 5.7 GHz. The received DC power at the rectenna was measured within dry and wet concrete samples with various cover thicknesses and air-gaps. For the rectenna buried within 30 mm of the concrete, the received DC power was 10.37 mW, which was, about 70% of the received DC power in free-space.

Prediction Of Traditional Chinese Medicine Diagnosis From Psychosocial Questionnaires, Scott David Mist

Dissertations and Theses

Astonishingly, most Traditional Chinese Medicine (CM) research in the West proceeds without CM diagnoses, perhaps because CM diagnosis is time consuming or not considered relevant. One way to improve the feasibility of incorporating CM diagnosis would be to prescreen participants using questionnaires. This would allow cost savings in recruitment, and balancing of treatments by CM diagnosis. Consequently, the hypothesis of this research was that pre-treatment questionnaires can predict CM diagnosis.

Baseline questionnaires from 195 participants with temporomandibular joint disorder (TMD) were examined to test the hypothesis. Two methods, logistic regression (LR) and reconstructability analysis (RA), were used in conjunction to …

High Performance Quality Management Systems And Work-Related Outcomes: Exploring The Role Of Audit Readiness And Documented Procedures Effectiveness, Sean P. Goffnett

Master's Theses and Doctoral Dissertations

This study investigates a comprehensive quality management system (QMS) and its influence on multiple work-related outcomes. It examines certified quality systems used in the automotive industry to test whether QMS audit readiness mediates the relationship between quality factors and outcomes. A survey instrument, encompassing quality award criteria and system certification precepts, helped identify factors associated with high-performance. Regression results showed several factors, including leadership and process management, as being critically important in predicting work outcomes. Human resources emerged as being critical to most outcomes. Audit readiness did not emerge as a mediating variable, but rather as a significant process outcome. …

Usability Inspection Methods After 15 Years Of Research And Practice, David G. Novick, Tasha Hollingsed

Departmental Papers (CS)

Usability inspection methods, such as heuristic evaluation, the cognitive walkthrough, formal usability inspections, and the pluralistic usability walkthrough, were introduced fifteen years ago. Since then, these methods, analyses of their comparative effectiveness, and their use have evolved in different ways. In this paper, we track the fortunes of the methods and analyses, looking at which led to use and to further research, and which led to relative methodological dead ends. Heuristic evaluation and the cognitive walkthrough appear to be the most actively used and researched techniques. The pluralistic walkthrough remains a recognized technique, although not the subject of significant further …

Airway Strain During Mechanical Ventilation In An Intact Animal Model, Scott W. Sinclair, Robert C. Molthen, Steven Thomas Haworth, Christopher A. Dawson, Christopher M. Waters

Biomedical Engineering Faculty Research and Publications

Rationale: Mechanical ventilation with large tidal volumes causes ventilator-induced lung injury in animal models. Little direct evidence exists regarding the deformation of airways in vivo during mechanical ventilation, or in the presence of positive end-expiratory pressure (PEEP).

Objectives: To measure airway strain and to estimate airway wall tension during mechanical ventilation in an intact animal model.

Methods: Sprague-Dawley rats were anesthetized and mechanically ventilated with tidal volumes of 6, 12, and 25 cm³/kg with and without 10–cm H₂O PEEP. Real-time tantalum bronchograms were obtained for each condition, using microfocal X-ray imaging. Images were …

Global Positioning System Systems Engineering Case Study, Air Force Center For Systems Engineering, Patrick J. O'Brien, John M. Griffin

AFIT Documents

No abstract provided.

Non-Ossicular Signal Transmission In Human Middle Ears: Experimental Assessment Of The "Acoustic Route" With Perforated Tympanic Membranes, Susan E. Voss, John J. Rosowski, Saumil N. Merchant, William T. Peake

Engineering: Faculty Publications

Direct acoustic stimulation of the cochlea by the sound-pressure difference between the oval and round windows (called the "acoustic route") has been thought to contribute to hearing in some pathological conditions, along with the normally dominant "ossicular route." To determine the efficacy of this acoustic route and its constituent mechanisms in human ears, sound pressures were measured at three locations in cadaveric temporal bones [with intact and perforated tympanic membranes (TMs)]: (1) in the external ear canal lateral to the TM, PTM; (2) in the tympanic cavity lateral to the oval window, POW; and (3) near the round window, PRW. …

Santa Clara Magazine, Volume 49 Number 2, Fall 2007, Santa Clara University

Santa Clara Magazine

14 - A DAY IN THE LIFE OF THE PRESIDENT By Ron Hansen. Set your alarm clock early-then get up and follow Paul Locatelli, S.J., through a day of leading the University and serving as pastor, professor, mayor, and CEO.

22 - BUILT BY IMMIGRANTS By Gerald McKevitt, S.J. How Italian Jesuits helped shape the American West, from religious devotions to curriculum to pasta.

28 - YOU ARE HERE By Sarah Stanek. SCU students and faculty collaborate on a groundbreaking project documenting early life at Mission Santa Clara-and the result is a book that's the first of its kind for …

Long-Term Trends From Ecosystem Research At The Hubbard Brook Experimental Forest, John L. Campbell, Charles T. Driscoll, Christopher Eagar, Gene E. Likens, Thomas G. Siccama, Chris E. Johnson, Timothy J. Fahey, Steven P. Hamburg, Richard T. Holmes, Amey S. Bailey, Donald C. Buso

Civil and Environmental Engineering - All Scholarship

The Hubbard Brook Experimental Forest was established by the U.S. Forest Service in 1955 as a major center for hydrologic research in the Northeast. The Hubbard Brook Ecosystem Study originated 8 years later with the idea of using the small watershed approach to study element flux and cycling and the response of forest ecosystems to disturbance. Since that time, the research program at Hubbard Brook has expanded to include various physical, chemical and biological measurements collected by researchers from a number of cooperating institutions. Collaborative, long-term data are the keystone of the Hubbard Brook Ecosystem Study and have provided invaluable …

Semester Project For Engineering Management, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

This is the semester-project for my IMSE 405/805 course on Engineering Management at the University of Nebraska-Lincoln. This team-based project required students to develop an operational plan (facility layout, required staffing, company operating policies, company benefits program) for a specified product.

Ribosome Kinetics And Aa-Trna Competition Determine Rate And Fidelity Of Peptide Synthesis, Aaron Fluitt, Elsje Pienaar, Hendrik J. Viljoen

Hendrik J. Viljoen Publications

It is generally accepted that the translation rate depends on the availability of cognate aa-tRNAs. In this study it is shown that the key factor that determines translation rate is the competition between near-cognate and cognate aa-tRNAs. The transport mechanism in the cytoplasm is diffusion, thus the competition between cognate, near-cognate and non-cognate aa-tRNAs to bind to the ribosome is a stochastic process. Two competition measures are introduced; C (i) and R (i) (i = 1, 64) are quotients of the arrival frequencies of near-cognates vs. cognates and noncognates vs. cognates, respectively. Furthermore, the reaction …

Quality And Inspection Of Machining Operations: Review Of Condition Monitoring And Cmm Inspection Techniques 2000 To Present, John T. Roth, Laine Mears, Dragan Djurdjanovic, Xiaping Yang, Thomas Kurfess

Publications

In order to consistently produce quality parts, many aspects of the manufacturing process must be carefully monitored, controlled, and measured. The methods and techniques by which to accomplish these tasks has been the focus of numerous studies in recent years. With the rapid advances in computing technology, the complexity and overhead that can be feasibly incorporated in any developed technique has dramatically improved. Thus, techniques that would have been impractical for implementation just a few years ago can now be realistically applied.

This rapid growth has resulted in a wealth of new capabilities for improving part and process quality and …

Case Study: Applying A Regional Cge Model For Estimation Of Indirect Economic Losses Due To Damaged Highway Bridges, Chakkaphan Tirasirichai, David Lee Enke

Engineering Management and Systems Engineering Faculty Research & Creative Works

Destruction from natural and man-made disasters can result in extensive damage to the affected area's infrastructure. While the destruction results in costs that are necessary to restore the physical destruction and repair of existing infrastructure, a wider economic impact is often indirectly measured and felt. Policymakers generally focus only on losses that are directly caused by the destruction, such as the replacement of roads and bridges, yet tend to overlook the consequences from indirect economic losses. This study proposes a framework to estimate the indirect economic loss due to damaged bridges within the highway system of a major metropolitan area. …

Gold Nanorods Mediate Tumor Cell Death By Compromising Membrane Integrity, Ling Tong, Yan Zhao, Terry B. Huff, Matthew N. Hansen, Alexander Wei, Ji-Xin Cheng

Other Nanotechnology Publications

Folate-conjugated gold nanorods targeted to tumor cell surfaces produced severe membrane damage upon near-infrared irradiation. Photoinduced injury to the plasma membrane resulted in a rapid increase in intracellular calcium (shown in green) with subsequent disruption of the actin network, featured prominently by the formation of membrane blebs.

Hydrological Monitoring With Hybrid Sensor Networks, Thomas V. Freiberger, Sahra Sedigh, Estella A. Atekwana

Electrical and Computer Engineering Faculty Research & Creative Works

Existing hydrological monitoring systems suffer from short- comings in accuracy, resolution, and scalability. Their fragility, high power consumption, and lack of autonomy necessitate frequent site visits. Cabling requirements and large size limit their scalability and make them prohibitively expensive. The research described in this paper proposes to alleviate these problems by pairing high-resolution in situ measure- ment with remote data collection and software maintenance. A hybrid sensor network composed of wired and wireless connections autonomously measures various attributes of the soil, including moisture, temperature, and resistivity. The mea- surements are communicated to a processing server over the existing GSM cellular …

Cs 415: Social Implications Of Computing, Leo Finkelstein

Computer Science & Engineering Syllabi

CS 415 is a communication skills course using as its subject matter current salient issues associated with the social implications of computing. In addition to the course text, you will need to use certain reading materials in the library and elsewhere, and you will be responsible for using concepts and theories provided in class lectures and discussions.

Cs 790-01: Semantic Web-Course, Amit P. Sheth

Computer Science & Engineering Syllabi

No abstract provided.

Bactericidal Effects Of Cold Plasma Technology On Geobacillus Stearothermophilus And Bacillus Cereus Microorganisms, Angela D. Morris, Gayle B. Mccombs, Susan L. Tolle, Mounir Laroussi, Wayne L. Hynes

Dental Hygiene Faculty Publications

Cold plasma is a state of matter that contains a large number of particles that are electrically charged. Plasmas generate chemically reactive species and ultraviolet radiation making them useful in decontamination applications (Kong & Laroussi, 2003). Research regarding the inactivation of gram-positive bacteria by cold plasma has been studied by Laroussi et al (2003); however, there is limited research regarding the germicidal effectiveness of cold plasma on Geobacillus stearothermophilus and Bacillus cereus microorganisms. The purpose of this study was to determine if cold plasma technology inactivates Geobacillus stearothermophilus and Bacillus cereus vegetative cells and spores. This study consisted of 981 …

Bs News

Building Services Engineering

No abstract provided.

Perceptions Of Age Discrimination, Organizational Justice, And Employee Attitudes On Intentions To Leave In The Engineering Industry, Courtney L. Bibby

Graduate Student Dissertations, Theses, Capstones, and Portfolios

The U.S. Department of Labor, Bureau of Labor Statistics (2006) reported that the annual turnover rate for employees of U.S. firms rose to 41% in 2005. Employee intentions to leave among young adults are a concern in many industries where the demand for skilled employees begins to exceed the supply. This is especially true in the engineering industry, because talented and knowledgeable employees are difficult to replace.

Employee turnover represents a practical dilemma for many businesses due to the loss of qualified personnel and additional recruitment and training costs. Although little is known about employee turnover intention within the engineering …

Microfabrication Of An Optical Chamber For Exposing Living Cells To Pulsed Electric Fields, Saleh Sheikh

Electrical & Computer Engineering Theses & Dissertations

I have fabricated a chamber which enables the application of Nanosecond Pulsed Electric Fields (nsPEFs) to living cells while monitoring their real time fluorescence with an inverted microscope. The No. I thickness (150µm nominal) coverslip glass substrate used for fabrication allows the use of high numerical aperture oil immersion objectives for imaging intracellular organelles. Electrodes are fabricated by first evaporating a chromium adhesion layer, followed by a nickel seed layer. Subsequently, an ultra-thick positive photoresist is applied and patterned to create a 30µm thick electroplating mold. The electrodes are then electrodeposited into the mold from a nickel sulfamate plating bath. …

Distributed Cluster-Based Outlier Detection In Wireless Sensor Networks, Swetha Gali

Electrical & Computer Engineering Theses & Dissertations

Wireless sensor networks find several potential applications in a variety of fields, such as environmental monitoring and control, battlefields, surveillance, smart buildings, human health monitoring, etc. These sensor networks consist of a large number of very tiny, inexpensive, and low power sensor nodes, which are deployed in a variety of harsh environments that may result in the sensor data getting corrupted. It is thus critical to detect and report these abnormal values in the sensor data, in order to have a better understanding of the monitored environment. Detection of the abnormal values is of special interest for the sensor network …

Radical Impact Of Change In Actions And Confidence Index On Reverse Decision Making An Application Based Study, Swatee Trimbak Paithankar

Engineering Management & Systems Engineering Theses & Dissertations

While making decisions under uncertainty, people are often unaware of the logical approach to form the decision process. It is assumed that collecting details, analyzing and evaluating data is enough to make 'proper' decisions. However, past research in the decision making arena has significantly validated that there exists a class of decision problems which is complex, ill-structured and not defined to the level where decision makers can draw logical conclusions based on existing traditional decision approaches. RDM (reverse decision making), one of the novel approaches of decision making under conditions of uncertainty, has shown potential towards addressing some of these …

Simulation To Augment Standardized Patients In Obstetric Ultrasound Training, Scott Richard Guirlinger

Computational Modeling & Simulation Engineering Theses & Dissertations

Standardized patients are actors used in medical training to teach and eval11atc clinical skills of students prior to their using these skills on an actual patient. Augmented Reality is a relatively new technology that can be used to augment standardized patients with abnonnalitie8 and pathologies that they cannot portray themselves as normal healthy human beings. In our project, we sought to augment standardized patients with a 12-week- old fetus in order to train and possibly evaluate medical students and professionals in performing obstetric ultrasound procedures and interpreting the corresponding ultrasound image results.

The software library ARToolkit provided the framework for …

Integrating Game Technology And Discrete Event Simulation To Analyze Mass Casualty Scenarios, Jason Loveland

Computational Modeling & Simulation Engineering Theses & Dissertations

In the last 10 years, video games have become complex simulation environments with high resolution 3D graphics enabled by powerhouse rendering engines, multi-player client server networks, user friendly displays and graphical user interface , while remaining relatively inexpensive. There is a critical need for systems engineering analysis and rapid trade studies due to changes in operations caused by current events such as terrorist attacks, asymmetric threats, natural disasters, etc. Modem games provide a unique way to visualize and interact with these complex environments, scenarios, missions, and operations. A discrete event simulator (DES) provides an environment to model system architecture behavior, …

Training Module In Regional And Municipal Governance Of Public Private Partnerships, Louis Gunnigan

Conference papers

This module concentrates on the issues important to those who will be setting up PPPs and who are involved in government at a regional or municipal level.

The module is centred on five tasks, namely:

• How to identify PPP opportunities and to find the best private sector partners for a PPP;
• How to organize a PPP programme within a government by enhancing cooperation amongst the relevant departments and ministries, local, regional and national authorities;
• How to be an effective manager and leader in a dynamic PPP unit;
• How to engage public support for PPPs;
• How to use international instruments to …