Digital Commons Network^™

A Study Of Electricians' Preferences Of Pvc And Alternative Conduit Materials In The State Of Utah, Robert Andrus

Theses and Dissertations

Polyvinyl Chloride, commonly known as PVC is a common and effective construction material. PVC is also one of the most common types of plastic. In 2008, global production and consumption of PVC was approximately 34.5 million tons. The construction industry is responsible for about 70% of the world's consumption of PVC. The largest construction use of PVC is for pipe and conduit. Modern construction, especially structures built for data services depend heavily upon PVC conduit for underground pathways to distribute electricity and data. PVC is also at the center of a fierce effort by environmental groups who would like to …

Total Storm Management Manual, Indiana Department Of Transportation

JTRP Other Publications and Reports

No abstract provided.

Structural Damage Localization With Tolerance To Large Time Synchronization Errors In Wsns, Guirong Yan, Shirley J. Dyke, Wei Song, Gregory Hackmann, Chenyang Lu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

With Recent Technological Advances in Smart Sensor Platforms, Structural Condition Monitoring Implementations based on Wireless Sensor Networks (WSNs) Have Received Considerable Attention. Modal Identification is an Integral Step in Many Structural Condition Monitoring Systems. However, Accurate Time Synchronization is Not Always Possible, Leading to Incorrect Identification of the Mode Shapes. Although Strict Time Synchronization of the Wireless Sensors Has Been Viewed as Crucial for the Identification of Mode Shapes, a New Perspective is Taken Herein. the Distortion in the Identified Mode Shapes is Characterized and Accommodated. Then the Resulting Mode Shapes Are Used with a Flexibility-Based Damage Detection Approach to …

Unraveling The Intricacies Of Spatial Organization Of The Erbb Receptors And Downstream Signaling Pathways, Michelle Costa

Chemical and Biological Engineering ETDs

Faced with the complexity of diseases such as cancer which has 1012 mutations, altering gene expression, and disrupting regulatory networks, there has been a paradigm shift in the biological sciences and what has emerged is a much more quantitative field of biology. Mathematical modeling can aid in biological discovery with the development of predictive models that provide future direction for experimentalist. In this work, I have contributed to the development of novel computational approaches which explore mechanisms of receptor aggregation and predict the effects of downstream signaling. The coupled spatial non-spatial simulation algorithm, CSNSA is a tool that I took …

Pegylation Of Niosomes, John A. Elliott

USF Tampa Graduate Theses and Dissertations

The research presented in this dissertation describes the creation and characterization of a novel antibody-vesicle conjugate modified with polyethylene glycol (PEG) that possesses enhanced binding to and uptake by inflammation-activated endothelial cells with improved storage stability and longer shelf-life and potential reduction in immunogenic potential compared to previous designs.

Targeted drug delivery provides an effective means of delivering therapeutic concentrations of a drug to the site or organ of action. The drug is delivered using a niosome, a vesicle with an aqueous core and a bilayer membrane composed of non-ionic surfactants and cholesterol. Antibodies that recognize specific cell antigens are …

Intermittent Behaviour Of A Cracked Rotor In The Resonance Region, Grzegorz Litak, Jerzy T. Sawicki

Mechanical Engineering Faculty Publications

Vibrations of the Jeffcott rotor are modelled by a three degree of freedom system including coupling between lateral and torsional modes. The crack in a rotating shaft of the rotor is introduced via time dependent stiffness with off-diagonal couplings. Applying the external torque to the system allows to observe the effect of crack “breathing” and gain insight into the system. It is manifested in the complex dynamic behaviour of the rotor in the region of internal resonance, showing a quasi-periodic motion or even non-periodic behaviour. In the present paper report, we show the system response to the external torque excitation …

Dilute Sulfuric Acid Pretreatment Of Switchgrass In Microwave Reactor For Biofuel Conversion: An Investigation Of Yields, Kinetics,, Oscar Martin

Theses and Dissertations

Lignocellulosic materials provide a raw material source for biofuel conversion and offer several advantages over fossil fuels- usage of a renewable resource, reduced greenhouse emissions, a decreased dependence on foreign oil, and stimulation of the agricultural sector. However, a primary technological challenge in converting lignocellulosic biomass into fuel is overcoming the recalcitrance of its matrix to enzymatic hydrolysis. To overcome these problems for chemical processing, naturally occurring cellulose biomass must be pretreated before it can be further processed using enzymatic hydrolysis or bioconversion. The goal of this work was to develop a model that predicts the glucose yield (pretreatment and …

2009 Scholars And Artists Bibliography, Michael Schwartz Library, Cleveland State University, Friends Of The Michael Schwartz Library, Michael Schwartz Ph.D.

Scholars and Artists Bibliographies

This bibliography was created for the annual Friends of the Michael Schwartz Library Scholars and Artists Reception, recognizing scholarly and creative achievements of Cleveland State University faculty, staff and emeriti. Dr. Michael Schwartz was the honored guest.

Computer-Aided Assessment Of Diagnostic Images For Epidemiological Research, Alison G. Abraham, Donald D. Duncan, Stephen J. Gange, Sheila West

Electrical and Computer Engineering Faculty Publications and Presentations

Background: Diagnostic images are often assessed for clinical outcomes using subjective methods, which are limited by the skill of the reviewer. Computer-aided diagnosis (CAD) algorithms that assist reviewers in their decisions concerning outcomes have been developed to increase sensitivity and specificity in the clinical setting. However, these systems have not been well utilized in research settings to improve the measurement of clinical endpoints. Reductions in bias through their use could have important implications for etiologic research. Methods: Using the example of cortical cataract detection, we developed an algorithm for assisting a reviewer in evaluating digital images for the presence and …

Development Of Rapid Die Wear Test Method For Assessment Of Die Life And Performance In Stamping Of Advanced/Ultra High Strength Steel (A/Uhss) Sheet Materials, Omer Necati Cora

Theses and Dissertations

Automotive companies are actively pursuing to increase the use of high-strength-lightweight alloys such as aluminum, magnesium, and advanced/ultra high-strength steels (A/UHSS) in body panel and structural part applications to achieve fuel efficiency while satisfying several environmental and safety concerns. A/UHSS sheet materials with higher strength and crashworthiness capabilities, in comparison to mild steel alloys, are considered as a near-term (i.e., ~5 years) choice of material for body and structural components due to their relatively low cost when compared with other lightweight materials such as aluminum and magnesium. However, A/UHSS materials present an increased level of die wear and springback in …

Mechanical Properties Of Ramie Fiber Reinforced Epoxy Lamina Composite For Socket Prosthesis, Tresna P. Soemardi, Widjajalaksmi Kusumaningsih, Agustinus Purna Irawan

Makara Journal of Technology

Mechanical properties of ramie fiber reinforced epoxy lamina composite for socket prosthesis. This paper presents an investigation into the application of natural fiber composite especially ramie fiber reinforced epoxy lamina composite for socket prosthesis. The research focuses on the tensile and shear strength from ramie fiber reinforced epoxy lamina composite which will be applied as alternative material for socket prosthesis. The research based on American Society for Testing Material (ASTM) standard D 3039/D 3039M for tensile strength and ASTM D 4255/D 4255M-83 for shear strength. The ramie fiber applied is a fiber continue 100 % Ne14'S with Epoxy Resin Bakelite …

Acuta Enews November 2009, Vol. 38, No. 11

ACUTA Newsletters

ln This Issue

From ACUTA Headquarters: Announcing ACUTA Connections ............Jeri Semer, CAE, Exec. Dir

Audio Seminar: "Cutting the Telecom Power Bill"

Deadline Approaching for Institutional Excellence Awards

Tech Talk: Forecast: Cloudy, with a Slight Chance of Lost Data? .............Kevin Tanzillo, Dux PR 3

UNC to Place Wind Turbines along the Outer Banks......................... From Campus technology News Update

DC Update ..........Dave Ostrom, Washington State University (retired)

lnfo Links................. Randy Hayes, Univ. of Northern lowa

Washington Update Newsletter for ACUTA Members

Bring Fall Seminar to Your Desktop 6 Remember: Nominate Now for 2010-2011 Board of Directors

Send Payments Direct to ACUTA

Addressing …

A Broad Prospective On Fuzzy Transforms: From Gauging Accuracy Of Quantity Estimates To Gauging Accuracy And Resolution Of Measuring Physical Fields, Vladik Kreinovich, Irina Perfilieva

Departmental Technical Reports (CS)

Fuzzy transform is a new type of function transforms that has been successfully used in different application. In this paper, we provide a broad prospective on fuzzy transform. Specifically, we show that fuzzy transform naturally appears when, in addition to measurement uncertainty, we also encounter another type of localization uncertainty: that the measured value may come not only from the desired location x, but also from the nearby locations.

From Gauging Accuracy Of Quantity Estimates To Gauging Accuracy And Resolution Of Measuring Physical Fields, Vladik Kreinovich, Irina Perfilieva

Departmental Technical Reports (CS)

For a numerical physical quantity v, because of the measurement imprecision, the measurement result V is, in general, different from the actual value v of this quantity. Depending on what we know about the measurement uncertainty d = V - v, we can use different techniques for dealing with this imprecision: probabilistic, interval, etc.

When we measure the values v(x) of physical fields at different locations x (and/or different moments of time), then, in addition to the same measurement uncertainty, we also encounter another type of localization uncertainty: that the measured value may come not only from the desired location …

Model Fusion Under Probabilistic And Interval Uncertainty, With Application To Earth Sciences, Omar Ochoa, Aaron A. Velasco, Christian Servin, Vladik Kreinovich

Departmental Technical Reports (CS)

One of the most important studies of the earth sciences is that of the Earth's interior structure. There are many sources of data for Earth tomography models: first-arrival passive seismic data (from the actual earthquakes), first-arrival active seismic data (from the seismic experiments), gravity data, and surface waves. Currently, each of these datasets is processed separately, resulting in several different Earth models that have specific coverage areas, different spatial resolutions and varying degrees of accuracy. These models often provide complimentary geophysical information on earth structure (P and S wave velocity structure).

Combining the information derived from each requires a joint …

Algae Grown On Dairy And Municipal Wastewater For Simultaneous Nutrient Removal And Lipid Production For Biofuel Feedstock, Ian Woertz, A. Feffer, Tryg Lundquist, Yarrow Nelson

Civil and Environmental Engineering

Algae grown on wastewater media are a potential source of low-cost lipids for production of liquid biofuels. This study investigated lipid productivity and nutrient removal by green algae grown during treatment of dairy farm and municipal wastewaters supplemented with CO₂. Dairy wastewater was treated outdoors in bench-scale batch cultures. The lipid content of the volatile solids peaked at Day 6, during exponential growth, and declined thereafter. Peak lipid content ranged from 14–29%, depending on wastewater concentration. Maximum lipid productivity also peaked at Day 6 of batch growth, with a volumetric productivity of 17 mg/day/L of reactor and an …

Wood Chip Heating For Commercial Buildings In Ireland: An Analysis Of Supply Methods And Financial Viability, Ciaran Berkeley

Masters

Ireland has three central issues regarding the supply and use of fuel and energy: import dependency; competitiveness; and greenhouse gases emissions. Ireland is ranked as one of the most import dependent states in the EU, with over 90% of its fuel sourced fiom abroad [IAEA, 20051. Combined with rapidly fluctuating oil and gas wsts and uncertainty with future supply, it is essential that Ireland find a more secure and sustainable alternative to fossil hels. Wood chip represents one such alternative energy source since it is locally produced and considered to be carbon-neutral. The main objective of this research is to …

Next Generation Biofuels And Advanced Engines For Tomorrow’S Transportation Needs, Sandia National Laboratories, Doe Combustion Research Facility, Doe Joint Bioenergy Institute

United States Department of Energy: Publications

In November 2009, Sandia National Laboratories hosted the Next Generation Biofuels and Advanced Engines for Tomorrow’s Transportation Needs Workshop. The event focused on the combined opportunities in biofuels and engines in the transportation sector. The workshop brought together the DOE Combustion Research Facility and the DOE Joint BioEnergy Institute along with oil companies, biofuel developers, engine manufacturers, suppliers, and experts from the university, regulatory, finance, and national laboratory communities. The intersection of biofuels and engines, if properly scaled, can meet a triad of national goals:

• Reduced climate impact

• Economic development

• Energy security through energy diversity

The workshop …

Long-Term Changes In Aluminum Fractions Of Drainage Waters In Two Forest Catchments With Contrasting Lithology, Pavel Krám, Jakub Hruška, Charles T. Driscoll, Chris E. Johnson, Filip Oulehle

Civil and Environmental Engineering - All Scholarship

Aluminum (Al) chemistry was studied in soils and waters of two catchments covered by spruce (Picea abies) monocultures in the Czech Republic that represent geochemical end-members of terrestrial and aquatic sensitivity to acidic deposition. The acid-sensitive Lysina catchment, underlain by granite, was compared to the acid-resistant Pluhův Bor catchment on serpentine. Organically-bound Al was the largest pool of reactive soil Al at both sites. Very high median total Al (Alt) concentrations (40 μmol L⁻¹) and inorganic monomeric Al (Ali) concentrations (27 μmol L⁻¹) were observed in acidic (pH 4.0) stream water at Lysina in …

Nutrient And Bacterial Transport In Runoff From Soil And Pond Ash Amended Feedlot Surfaces, John E. Gilley, Jason R. Vogel, Elaine D. Berry, Roger Eigenberg, David B. Marx, Brian L. Woodbury

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The addition of pond ash (fly ash that has been placed in evaporative ponds and subsequently dewatered) to feedlot surfaces provides a healthier environment for livestock and economic advantages for the feedlot operator. However, the water quality effects of pond ash amended surfaces are not well understood. The objectives of this field investigation were to: (1) compare feedlot soil properties, and nutrient and bacterial transport in runoff, from pond ash amended surfaces and soil surfaces; (2) compare the effects of unconsolidated surface materials (USM) (loose manure pack) and consolidated subsurface materials (CSM) (compacted manure and underlying layers) on nutrient and …

A Rapid Prototyping Method For Constructing A Complex Three-Dimensional Substrate, Kathryn Jacoba Hart

Master's Theses

Cell culturing on three-dimensional structures has increased the possibilities in tissue engineering and bioreactor research. These structures enable cells to differentiate, proliferate, mobilize, and function in a conformation that more accurately mimics in vivo conditions. Computer generated models aid in development and rapid alteration of three-dimensional cell substrates, defining their internal structure as well as their external morphology. The rapid transition from substrate design to a viable culture is imperative to quickly advance research in biomedical and tissue engineering applications.

The aim of this thesis is to investigate the feasibility of a rapid prototyping process by selectively cross-linking and assembling …

Mechanics-Based Analysis Of Selected Features Of The Exoskeletal Microstructure Of Popillia Japonica, Liang Cheng, Liyun Wang, Anette M. Karlsson

Mechanical Engineering Faculty Publications

We explore key mechanical responses of the layered microstructure found in selected parts of the exoskeletons (pronotum, leg and elytron) of Popillia japonica (Japanese beetle). Image analyses of exoskeleton cross-sections reveal four distinct layered regions. The load-bearing inner three regions (exocuticle, mesocuticle, and endocuticle) consist of multiple chitin-protein layers, in which chitin fibers align in parallel. The exocuticle and mesocuticle have a helicoidal structure, where the stacking sequence is characterized by a gradual rotation of the fiber orientation. The endocuticle has a pseudo-orthogonal structure, where two orthogonal layers are joined by a thin helicoidal region. The mechanics-based analyses suggest that, …

Comparison Of Cumulative Planimetry Versus Manual Dissection To Assess Experimental Infarct Size In Isolated Hearts, Matthias L. Riess, Samhita S. Rhodes, David F. Stowe, Mohammed Aldakkak, Amadou K.S. Camara

Biomedical Engineering Faculty Research and Publications

Introduction

Infarct size (IS) is an important variable to estimate cardiac ischemia/reperfusion injury in animal models. Triphenyltetrazolium chloride (TTC) stains viable cells red while leaving infarcted cells unstained. To quantify IS, infarcted and non-infarcted tissue is often manually dissected and weighed (IS-DW). An alternative is to measure infarcted areas by cumulative planimetry (IS-CP).

Methods

We prospectively compared these two methods in 141 Langendorff-prepared guinea pig hearts (1.44 ± 0.02 g) that were part of different studies on mechanisms of cardioprotection. Hearts were perfused with Krebs–Ringer's and subjected to 30 min global ischemia after various cardioprotective treatments. Two hours after reperfusion …

Analysis Of Globule Types In Malignant Melanoma, Jin Xu, Kapil Kumar Gupta, William V. Stoecker, Yamini Krishnamurthy, Harold S. Rabinovitz, Austin Bangert, David A. Calcara, Margaret C. Oliviero, Joseph M. Malters, Rhett J. Drugge, R. Joe Stanley, Randy Hays Moss, Mehmed Emre Celebi

Chemistry Faculty Research & Creative Works

Objective: To identify and analyze subtypes of globules based on size, shape, network connectedness, pigmentation, and distribution to determine which globule types and globule distributions are most frequently associated with a diagnosis of malignant melanoma. Design: Retrospective case series of dermoscopy images with globules. Setting: Private dermatology practices. Participants: Patients in dermatology practices. Intervention: Observation only. Main Outcome Measure: Association of globule types with malignant melanoma. Results: The presence of large globules (odds ratio [OR], 5.25) and globules varying in size (4.72) or shape (5.37) had the highest ORs for malignant melanoma among all globule types and combinations studied. Classical …

A Model For Sustainable Humanitarian Engineering Projects, Evan A. Thomas, Bernard Amadei, Robyn Sandekian

Mechanical and Materials Engineering Faculty Publications and Presentations

The engineering profession should embrace a new mission statement?to contribute to the building of a more sustainable, stable, and equitable world. Recently, engineering students and professionals in the United States have shown strong interest in directly addressing the needs of developing communities worldwide. That interest has taken the form of short-and medium-term international trips through Engineers Without Borders?USA and similar organizations. There are also several instances where this kind of outreach work has been integrated into engineering education at various US institutions such as the University of Colorado at Boulder. This paper addresses the challenges and opportunities associated with balancing …

Coaxial Cable Sensors And Sensing Instrument For Crack Detection In Bridge Structures -- Phase I: Field Qualification/Validation Planning, Genda Chen, Fujian Tang, Zhi Zhou

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The objectives of this study are to pre-test analyze a decommissioned RC bridge that is selected in consultation with New York State Department of Transportation (NYSDOT), and design and plan the field tests of the bridge for the performance qualification and validation of distributed crack sensors and a fast Electrical Time Domain Reflectometry (ETDR) instrument to their full potential. The scope of work includes: (a) Selection of a decommissioned bridge, (b) Pre-test analysis of the select bridge structure to evaluate its progressive damage and determine the locations for sensor deployment, (c) Design and planning of field tests of the select …

Agenda: World Energy Justice Conference And Appropriate Technology Arcade, University Of Colorado Boulder. Center For Energy & Environmental Security, University Of Colorado Boulder. School Of Law

World Energy Justice Conference (October 23-24)

The 2009 CEES Energy Justice Conference took place at the University of Colorado Law School on October 23rd and 24th, 2009. It featured 11 sessions, more than 40 speakers, and attracted over 200 attendees. The Conference brought together leading international and U.S. decision-makers in politics, engineering, public health, law, business, economics, and innovators in the sciences to explore how best to address the critical needs of the energy-oppressed poor (EOP) through long-term interdisciplinary action, information sharing, and deployment of appropriate sustainable energy technologies (ASETs).

The Colorado Journal of International Environmental Law & Policy (CJIELP) at the University of Colorado Law …

Agenda: Best Practices For Community And Environmental Protection, University Of Colorado Boulder. Natural Resources Law Center. Intermountain Oil And Gas Bmp Project, Colorado. Oil And Gas Conservation Commission

Best Practices for Community and Environmental Protection (October 14)

The first Intermountain BMP Project workshop, sponsored by the Natural Resources Law Center and the Colorado Oil and Gas Conservation Commission, was held in Rifle, Colorado on October 14, 2009 at the Garfield County Fairground for over 170 participants.

Speakers from Federal, state and local governments, the community, industry and environmental consultants, and conservation groups focused presentations and discussion on a greater understanding of what Best Management Practices (BMPs) are appropriate to the western slope of Colorado and how they are integrated into developments.

Slides: Best Management Practices: Planning, Leasing, Permitting, Jamie Connell

Best Practices for Community and Environmental Protection (October 14)

Presenter: Jamie Connell, Northwest Colorado District Manager, U.S. Bureau of Land Management (BLM) Colorado

23 slides

Slides: Disappearing Roads--An Efd Project: An Exploration Into Low Impact And Efficient Gas Field Drilling, Charles Dolan

Best Practices for Community and Environmental Protection (October 14)

Presenter: Rich Haut, Houston Advanced Research Center (HARC), for Dr. Charles Dolan, University of Wyoming, Environmentally Friendly Drilling Program

25 slides