Digital Commons Network^™

Determination Of Sorption Coefficients For Neptunium, Plutonium, Iodine, And Technetium In Engineered And Natural Systems Under Oxidizing And Reducing Conditions, Michael Lilley

All Theses

Plutonium, neptunium, technetium, and iodine present appreciable risks at nuclear waste disposal sites around the world due to their potential mobility. Sorption of each of these radionuclides is profoundly influenced by oxidation/ reduction reactions. Therefore, the mobility of each radionuclide may be greatly influenced by redox conditions of the natural or engineered system. The primary focus of this study was to determine distribution coefficients (K_d) for each radionuclide for engineered concrete and saltstone systems with varying amounts of reducing slag (a cement additive to create a reducing environment), and for iodide/iodate in natural sediments. Saltstones are a mixture …

Identifying Barriers To Address During The Delivery Of Sustainable Building Renovation Projects, Corey Cattano

All Theses

Architects, engineers, and contractors are continuously searching for tools and methods to reduce the unique risks associated with the delivery of construction projects. Since national policies to reduce carbon emissions and energy consumption will require drastic improvements to the existing building stock, one specific area in need of such tools is the sustainable renovation of existing buildings. The purpose of this research is to identify the barriers to address during the delivery of sustainable renovation projects and offer solutions that overcome these barriers. For example, typical renovation projects do not coordinate energy retrofits with building system renovations, resulting in poor …

Pulse Echo Ultrasonic Testing Of Adhesive Bonded Joints For Automotive Applications, Arun Ganapathi

All Theses

The growing prominence of adhesive bonding technology in automotive manufacture has necessitated the development of reliable and robust quality assurance techniques. Of the different Nondestructive testing technologies available, Ultrasonic testing has shown itself to be the most promising technique to satisfy the requirements in automobile production. The current work attempts to apply two variations of the Ultrasonic Pulse Echo technique namely Contact and Immersion testing for inspecting typical hem bonded automotive joints. The joints have been tested for disbond at the various metal-adhesive interfaces by using an ultrasonic scan comparison method which compares the acquired signals against a reference scan …

Flight Physician - December, 2010, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A sixteen page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

The Quadricycle Hand And Foot Cycle, Marissa Chin, Parker Drennan, Spencer Nelson, Kevin Reidy

Mechanical Engineering

This report documents the design process from concept generation to manufacturing for a hand and foot powered cycle named the Quadricycle.  The Quadricycle project is a joint effort at California Polytechnic State University in San Luis Obispo between the Mechanical Engineering and Kinesiology Departments.  The project objectives are to design a portable cycle that can be powered by hands and feet simultaneously in order to provide recreation and rehabilitation for a person with a disability.  This project is funded under a grant by the National Science Foundation (NSF).

Toward Automated Detection And Diagnosis Of Mammographic Microcalcifications, Imad Mohammad Zyout

Dissertations

Mammographie diagnosis is the most effective technique to detect breast cancer in its infancy when it is most responsive to treatment. An early and a significant indicator of breast cancer is the presence of clustered microcalcifications (MCs). Mammographie MCs greatly vary in their appearance and shape, and become indistinguishable when surrounded by dense breast tissue. This makes radiologist's interpretation of mammograms a tedious and an error prone task.

Although computer aided diagnosis (CAD) methods are being developed to aid radiologist in detecting and analyzing the malignancy of MCs, existing systems have not achieved a satisfactory performance. The specificity of existing …

Pharmaceuticals And Personal Care Products In Ground Water From Municipal Lagoon Treatment, Teresa Nicholas

Boise State University Theses and Dissertations

Pharmaceuticals and personal care products (PPCPs) are biologically active, organic chemicals that are introduced into the environment through wastewater streams. These chemicals are being found in the environment in trace concentrations and are of concern due to their unknown potential for harm to the health and welfare of the environment. The hypothesis is that during the course of wastewater treatment in a municipal lagoon system from a small community, PPCPs are seeping into ground water resulting in chronic low exposure in the environment. The objective of this work was to study a specific wastewater lagoon treatment system in Mountain Home, …

Characterization And Evaluation Of A Novel Tissue Engineered Aortic Heart Valve Construct, Mary Tedder

All Dissertations

Tissue engineering holds great promise for treatment of valvular diseases. Scaffolds for engineered heart valves must function immediately after implantation, but must also permit repopulation with autologous host cells and facilitate gradual remodeling.
Native aortic heart valves are composed of three layers, i.e. two strong external fibrous layers (ventricularis and fibrosa) separated by a central, highly hydrated spongiosa. The fibrous layers provide strength and resilience while the spongiosa layer facilitates shearing of the external layers. Our working hypothesis is that partially cross-linked collagen scaffolds that closely mimic the layered histo-architecture of the native valve would fulfill these requirements. To test …

New To Ols For Monitoring Gamma Camera Uniformity, Brad K. Lofton

Dissertations and Theses (Open Access)

Detector uniformity is a fundamental performance characteristic of all modern gamma camera systems, and ensuring a stable, uniform detector response is critical for maintaining clinical images that are free of artifact. For these reasons, the assessment of detector uniformity is one of the most common activities associated with a successful clinical quality assurance program in gamma camera imaging. The evaluation of this parameter, however, is often unclear because it is highly dependent upon acquisition conditions, reviewer expertise, and the application of somewhat arbitrary limits that do not characterize the spatial location of the non-uniformities. Furthermore, as the goal of any …

Singular Value Decomposition Metrics Show Limitations Of Detector Design In Diffuse Fluorescence Tomography, Frederic Leblond, Kenneth M. Tichauer, Brian W. Pogue

Dartmouth Scholarship

The spatial resolution and recovered contrast of images reconstructed from diffuse fluorescence tomography data are limited by the high scattering properties of light propagation in biological tissue. As a result, the image reconstruction process can be exceedingly vulnerable to inaccurate prior knowledge of tissue optical properties and stochastic noise. In light of these limitations, the optimal source-detector geometry for a fluorescence tomography system is non-trivial, requiring analytical methods to guide design. Analysis of the singular value decomposition of the matrix to be inverted for image reconstruction is one potential approach, providing key quantitative metrics, such as singular image mode spatial …

Polymer (Su-8) Optofluidic Device With Embedded Hydrogel Oxygen Sensing Elements, Zhan Gao, David B. Henthorn, Chang-Soo Kim

Chemical and Biochemical Engineering Faculty Research & Creative Works

The SU-8 photopolymer is an excellent alternative for traditional materials used in fluidic devices such as glass- or silicon-Based inorganic materials. We describe a new chemically anchored, lithographically patterned hydrogel sensing element embedded in a completed SU-8 fluidic channel structure after the channel bonding process. Polyethylene glycol (PEG) hydrogel films incorporating oxygen-responsive ruthenium-complex fluorophores are grafted and patterned by photopolymerization of solution-phase precursors on the modified SU-8 channel surface. the optofluidic sensing platform with this embedded sensing elements exhibited excellent performance in measuring dissolved oxygen content. a unique advantage of this method is the selective growth of various functional films …

Assessment Of Morphology And Hemodynamics In Normal And Remodeled Microvasculature With Parameter Sensitivity Analysis, Shilpi Ghosh

Master's Theses

The goal of this study was to compare the morphological and hemodynamic characteristics of normal and remodeled vascular networks in the mouse gracilis muscle. To this end, previously developed models to assess flows and vascular branching were used to assess the normal and remodeled microcirculatory networks. The analysis revealed that the average individual vessel flow rates for vessels of similar caliber and total volumetric flow rates in the networks do not change for vessels of the same caliber after remodeling. Connectivity changes and average diameters primarily change in the larger arterioles after remodeling. A few correlations could be made between …

Novel Vascular Grafts Based On Polyphenol-Stabilized Acellular Tissue Scaffolds, Ting-Hsien Chuang

All Dissertations

The Cardiovascular diseases (CVDs) continue to be the leading cause of morbidity and mortality worldwide. The most common form of CVDs is occlusion of blood flow thus limiting blood supply to specific tissues or organs. Atherosclerosis is a leading cause of coronary heart disease and stroke, which were responsible for more than 25% of deaths in 2004.
The demand for vascular graft is huge. In United States alone, approximately 500,000 coronary artery bypass graft surgeries are performed annually. Synthetic polymers such as Dacron and ePTFE have been successfully applied in large diameter blood vessel prosthesis; however, for small diameter (inner …

Evaluation Of Factors That Modulate Cellular Adipogenesis For Breast Tissue Engineering Strategies, Cheryl Gomillion

All Dissertations

It is estimated that this year more than 200,000 women in the United States will be diagnosed with breast cancer. Treatment for most occurrences of breast cancer will often include surgical removal of the tumorigenic tissue, resulting in a soft tissue defect within the subcutaneous tissue of the skin. Post-surgical reconstruction methods are often sought by patients to restore the aesthetic function of the breast via cellular or non-cellular methods; however, because of complications associated with currently used methods for breast reconstruction, researchers are investigating tissue engineering methods to produce viable autologous adipose tissue for breast reconstruction.
Previous research in …

A Review Of The Benefits And Applications Of The Thorium Fuel Cycle, Vincent Hall

Chemical Engineering Undergraduate Honors Theses

This paper aims to inform the reader of the benefits that can be achieved by using thorium as a fuel for nuclear power. Stages of the thorium cycle are directly compared against the current uranium based nuclear fuel cycle. These include mining, milling, fuel fabrication, use of various reactor designs, reprocessing, and disposal. Thorium power promises several key advantages over traditional nuclear power methods, namely a dramatic decrease in long lived radioactive waste, increased fuel efficiency, greater chemical stability during disposal, and higher adaptability for differing reactor designs across a wider range of the thermal neutron spectrum. Obstacles that face …

Integration Of Ultrasonic Consolidation And Direct-Write To Fabricate An Embedded Electrical System Within A Metallic Enclosure, Ludwing A. Hernandez

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A research project was undertaken to integrate Ultrasonic Consolitation (UC) and Direct-Write (DW) technologies into a single apparatus to fabricate embedded electrical systems within an ultrasonically consolidated metallic enclosure. Process and design guidelines were developed after performing fundamental research on the operational capabilities of the implemented system. In order to develop such guidelines, numerous tests were performed on both UC and DW. The results from those tests, as well as the design and process guidelines for the fabrication of an embedded touch switch, can be used as a base for future research and experimentation on the UC-DW apparatus. The successful …

Retrieval Of Aerosol Mass Concentration From Elastic Lidar Data, Christian C. Marchant

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Agricultural aerosol sources can contribute significantly to air pollution in many regions of the country. Characterization of the aerosol emissions of agricultural operations is required to establish a scientific basis for crafting regulations concerning agricultural aerosols. A new lidar instrument for measuring aerosol emissions is described, as well as two new algorithms for converting lidar measurements into aerosol concentration data. The average daily aerosol emission rate is estimated from a dairy using lidar.

The Aglite Lidar is a portable scanning lidar for mapping the concentration of particulate matter from agricultural and other sources. The instrument is described and performance and …

Destructive Testing Of Composite Precast Concrete Deck Panels And Built-Up Steel Plate Girders, Wesley J. Cook

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Utah Department of Transportation (UDOT) has implemented the use of precast concrete panels for bridge deck construction. A bridge utilizing these panels as a reconstruction method was decommissioned three years after the new deck installation, due to unrelated matters. Two sections of this bridge were salvaged and sent to Utah State University (USU) for destructive testing.

Each bridge section consisted of two built-up steel plate girders intact with the precast concrete deck panels. The precast panels were designed and constructed to achieve full composite action between the deck and built-up steel plate girders through the use of Nelson shear …

Characterization And Analysis Techniques Of A Dynamic In Vitro Blood-Brain Barrier Model, Ryan Everett Woodhouse

Biomedical Engineering

The blood-brain barrier (BBB) is responsible for maintaining the sensitive environment required by the brain. Although the BBB is necessary for proper functioning of the brain, it acts as an obstacle for doctors attempting to treat neurological disease. For a drug to act upon the brain, it must first pass through the discriminating BBB. For this reason, much research has been performed in recent years in order to create an in vitro model of the BBB on which drugs targeted for the central nervous system may be tested. The main goal of this project is to create an in vitro …

Characterization Of Anti-Proteolytic And Anti-Proliferative Activities Of Pentagalloylglucose; Its Potential Application As A Therapeutic Agent In Vascular Diseases, Chaitra Cheluvaraju

All Dissertations

Cardiovascular diseases are the leading causes of mortality in the United States and will cost around $500 billion this year alone. Elevated proteolytic activity, increased proliferation and migration of vascular smooth muscle cells are hallmarks of atherosclerosis, stenosis and aortic aneurysms. These diseases often manifest the transdifferentiation of vascular smooth muscle cells into osteoblast-like cells followed by deposition of hydroxyapatite–like mineral in the arterial walls.
Currently, there are no standard treatments available for vascular calcification or aneurysms. Atherosclerosis treatment options are limited to statins while balloon angioplasty and stenting – surgical procedures for stenosis, often end in restenosis. Therefore, we …

Development Of Near Real-Time Assessment System For Cancer Cells., Nahrizul Adib Kadri

Student Works (2010-2019)

Dielectrophoresis (DEP) is an electrical phenomenon that occurs when a polarisable particle is placed in non-uniform electrical fields, generating DEP force (FDEP) that is dependent upon the electrophysiological make-up of the particle in use. In cell cytometry studies, DEP offers the advantage of conducting various cell manipulations in vitro without the need of specific surface markers. Its drawbacks, namely the time-consuming processes involved and the inability to conduct large batch cell assays, had limited its usage. This thesis presents the work that offered solution to the said obstacles, by developing a system capable of conducting DEP experiments within a very …

Development Of Software To Estimate Pressures On The Residual Limbs Of Amputees By Means Of A Pylon Mounted Transducer, Malli K. Yalamanchili

UNLV Theses, Dissertations, Professional Papers, and Capstones

The alignment of prosthesis has been recognized as one of the main factors that determine successful prosthetic outcomes for trans-tibial amputees. Alignment is defined as the relative position and orientation of the prosthetic components. Misalignment can result in changes in the position and orientation of the joints of the leg and moments experienced by them during gait, increases in energy use, and discomfort or even tissue breakdown at the socket/stump interface. Hence it is very important to align the prosthesis in correct manner. Gait analysis can be used to examine the effects of incorrect alignment of the prosthesis during gait. …

Tidal Current Energy Resource Assessment In Ireland: Current Status And Future Update, Fergal O'Rourke, Fergal Boyle, Anthony Reynolds

Articles

Interest in renewable energy in Ireland has increased continually over the past decade. This interest is due primarily to security of supply issues and the effects of climate change. Ireland imports over 90% of its primary energy consumption, mostly in the form of fossil fuels. The exploitation of Ireland’s vast indigenous renewable energy resources is required in order to reduce this over dependence on fossil fuel imports to meet energy demand. Various targets have been set by the Irish government to incorporate renewable energy technologies into Ireland’s energy market. As a result of these targets, the development in wind energy …

The Effectiveness Of Silica Sand In Semi-Aerobic Stabilized Landfill Leachate Treatment, Ezlina Othman, Mohd Suffian Yusoff, Hamidi Abdul Aziz, Mohd Nordin Adlan, Mohammed J.K. Bashir, Yung Tse Hung

Civil and Environmental Engineering Faculty Publications

© 2010 by the authors. This study examines the suitability of natural silica sand as a low-cost adsorbent for the removal of ammoniacal nitrogen and heavy metals, particularly iron and zinc, from semi-aerobic stabilized landfill leachate. Leachate samples were collected from the Pulau Burung landfill site (PBLS) in Penang, Malaysia. The above-mentioned contaminants are highlighted in this study because of their unsafe concentrations at PBLS. The effects of shaking time, settling time, and silica sand dosage on the study parameter removal efficiencies were investigated to predict the performance of the process. The adsorptions of ammoniacal nitrogen, iron, and zinc were …

Experimental Evaluation Of Select Servers And Firewalls Under Denial Of Service Security Attacks, Raja Sekhar Reddy Gade

Theses and Dissertations - UTB/UTPA

Internet security requires newer prevention mechanisms to be implemented on web-servers and routers. Firewall/Intrusion Prevention mechanisms (IPS) can be deployed on host servers or routers as an added line of defense against Internet attacks. In this thesis, we evaluate performance of security mechanisms provided by these devices against Distributed Denial of Service (DDoS) attacks. The host based firewalls on Windows servers-2003 and 2008 were evaluated. In this thesis, we also evaluated Juniper Networks Netscreen-5GT firewall/IPS, and Cisco ASA-5510/IPS that are used in protecting web-servers against DDoS attacks. It was found that the host based firewalls and protection mechanisms on the …

Evaluation Of Periodontal Scaling Task And Development Of Force–Endurance Models For Simulated Scaling Task, Vettrivel Gnaneswaran

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Force exertion is critical in grasping and holding activities at sub-maximal levels. Exertion misjudgments lead to musculoskeletal disorders (MSDs) impairing performance and productivity. Published literatures on grasping have addressed the force balance and endurance issues for non-prehensile movements of hand. However, little information is available on the force exerted in precision gripping employed in health care. Professionals, especially dental hygienists, when treating patients adopt awkward postures for extended period leading to cumulative trauma. Literatures on cumulative trauma have identified force exertion to be an important risk factor. Lack of information on fatigue with precision gripping motivated this research to establish …

Robust Neural Network Rise Observer Based Fault Diagnostics And Prediction, James W. Fonda, S. (Sarangapani) Jagannathan, Steve Eugene Watkins

Electrical and Computer Engineering Faculty Research & Creative Works

A novel fault diagnostics and prediction scheme in continuous time is introduced for a class of nonlinear systems. The proposed method uses a novel neural network (NN) based robust integral sign of the error (RISE) observer, or estimator, allowing for semi-global asymptotic stability in the presence of NN approximation errors, disturbances and unmodeled dynamics. This is in comparison to typical results presented in the literature that show only boundedness in the presence of uncertainties. The output of the observer/estimator is compared with that of the nonlinear system and a residual is used for declaring the presence of a fault when …

Bi-Material Attachment Through A Soft Tissue Interfacial System, Y. X. Liu, S. Thomopoulos, Victor Birman, J. S. Li, G. M. Genin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Sustainable Practices And Related Performance Measures At State Highway Agencies, Lenahan O’Connell

Kentucky Transportation Center Research Report

This report identifies seven ways in which an SHA can harm the environment: (1) excessive consumption of virgin materials; (2) unnecessary levels or amounts of storm water runoff; (3) release of environmental contaminants by SHA employees and contractors; (4) inadequate environmental training of employees and contractors; (5) wasteful use of energy by SHA employees and contractors; (6) the promotion of excessive driving by the public and concomitant release of green house gases; and (7) inadequate oversight mechanisms and procedures to prevent unsustainable practices. The report then identifies the sustainable practices and related performance measures SHAs can use to prevent or …

Barriers And Best Practices For Material Management In The Healthcare Sector, Carlos Callender, Scott Erwin Grasman

Engineering Management and Systems Engineering Faculty Research & Creative Works

The primary focus of the healthcare sector has been to provide patients with the best quality of care. Recently, the escalating cost of supplies and the severe competition among healthcare providers has significantly increased the pressure on material managers to operate more cost-efficiently without compromising high patient care standards. While other sectors have experienced success through the deployment of supply chain management practices, the healthcare sector has not seen major improvements in this area; however, in spite of the uniqueness and complexity of the healthcare supply chain, opportunities for improvements are plentiful. This article provides an assessment of material management …