Digital Commons Network^™

Computational Analyses Of The Uptake And Distribution Of Carbon Monoxide (Co) In Human Subjects, Kinnera Chada

University of Kentucky Doctoral Dissertations

Carbon monoxide (CO) is an odorless, colorless, tasteless gas that binds to hemoglobin with high affinity. This property underlies the use of low doses of CO to determine hemoglobin mass (M_Hb) in the fields of clinical and sports medicine. However, hemoglobin bound to CO is unable to transport oxygen and exposure to high CO concentrations is a significant environmental and occupational health concern. These contrasting aspects of CO—clinically useful in low doses but potentially lethal in higher doses—mandates a need for a quantitative understanding of the temporal profiles of the uptake and distribution of CO …

Proving Sustainability: The International Development Monitoring Initiative, Evan A. Thomas, Zdenek Zumr

Mechanical and Materials Engineering Faculty Publications and Presentations

Nearly a billion people in the world lack access to safe drinking water, two billion have inadequate sanitation facilities, three billion use biomass for their daily energy needs and nearly half the world's population live in rural isolation, lacking access to the most basic human services. Combined, these limitations are a leading cause of the perpetuating cycle of poverty and political insecurity. Meanwhile, the majority of international development agencies are responsible for self-reporting project outcomes. At best, expert spot-checks are conducted in the field occasionally. These results tend to show individual project success, while meta- surveys indicate on-going challenges in …

Development Of Risk Uncertainty Factors From Historical Nasa Projects, Tahani R. Amer

EMSE Doctoral Projects

NASA is a good investment of federal funds and strives to provide the best value to the nation. NASA has consistently budgeted to unrealistic cost estimates, which are evident in the cost growth in many of its programs. In this investigation, NASA has been using available uncertainty factors from the Aerospace Corporation, Air Force, and Booz Allen Hamilton to develop projects' risk posture. NASA has no insight into the developmental of these factors and, as demonstrated here, this can lead to unrealistic risks in many NASA Programs and projects (P/p). The primary contribution of this project is the development of …

Separation Of Humic Matter From Groundwater Via Anion Exchange Resin: Comparison Of Bead And Powder Form, Sandra June Everett

Open Access Theses & Dissertations

This work describes a comparison of a bead and powder form of anion exchange resin for removing humic matter from groundwater. The materials and procedures described herein involve a manufactured dry humic matter and two forms of the same anion exchange resin. Spectroscopy was the chosen procedure for analysis of organics.

Preliminary experiments were required to gain a better understanding of the materials and to prepare the best conditions for actual experimental research. Five concentrations of humic acid were used for experimental purposes at 0.5, 1, 5, 10 and 20 mg/L. Three concentrations of resin were used: 500, 750 and …

Enterprise Transformation Through A Zachman-Bayesian Framework To Improve Efficiency & Productivity, Ramakanth Gona

Open Access Theses & Dissertations

Although organizations are aware of the benefits of enterprise architectures models, organizations have difficulties determining deficiencies in their business architecture. Organizational assessment tools often do not achieve expectations as sold to management. Performance measures often fail to properly represent necessary holistic measurements. Methods for capturing deficiencies in current business models and deterring improvements to optimize business processes are rare. This thesis develops a new experimental architecture modeling approach for enterprise transformations. The approach is efficient in capturing deficiencies and finding correlations which can become targeted goals for improvements. The Zachman enterprise architecture framework provides a holistic view of organizational models …

Evaluation Methods For Health Monitoring Of Aerospace Structure Rotary Joints, Sergio Armando Navarro

Open Access Theses & Dissertations

In September 2007, the excessive vibrations played a significant role in the station operation since one of the rotary joints, which provides the station electrical energy, presented an anomaly. The replacement of its bearing components and re-lubrication were necessary to reduce the problem. To avoid a new anomaly, the inspection of the rotary joints performance continues by using the accelerometers data. This thesis presents three new approaches to monitor the vibrations at the International Space Station based on Root-Mean-Square, kurtosis, and Approximate Entropy (ApEn). MATLAB functions and codes were necessary to implement the three monitoring techniques results from the provided …

Development Of A Gis Fiber Optics Assetmanagement System For The City Of El Paso, Luis Fernando Quintana

Open Access Theses & Dissertations

The GIS Fiber Optics Asset Management System (GFOAMS) was developed for the City of El Paso, to manage the public fiber optics infrastructure. Using a map-driven interface, the GFOAMS is composed of three modules: inventory, documents, and images. Its interactive multilayer data structure contains information for Junction Boxes, Conduit Runs, and Cables for twelve fiber optic systems across the city. The fiber optics network stored in the GFOAMS connects city buildings and facilities such as police departments, fire departments, municipal courts, health administration building, public transportation facilities/Sun Metro, libraries and others. Applications of the GFOAMS include tools to easy access …

Microstructural Architecture Developed In The Fabrication Of Solid And Open-Cellular Copper Components By Additive Manufacturing Using Electron Beam Melting, Diana Alejandra Ramirez

Open Access Theses & Dissertations

The fabrication of Cu components were first built by additive manufacturing using electron beam melting (EBM) from low-purity, atomized Cu powder containing a high density of Cu2O precipitates leading to a novel example of precipitate-dislocation architecture. These microstructures exhibit cell-like arrays (1-3µm) in the horizontal reference plane perpendicular to the build direction with columnar-like arrays extending from ~12 to >60 µm in length and corresponding spatial dimensions of 1-3 µm. These observations were observed by the use of optical metallography, and scanning and transmission electron microscopy. The hardness measurements were taken both on the atomized powder and the Cu components. …

Modeling Impulse Oscillometry Data: Using Augmented-Ric And Extended-Ric Respiratory Impedance Model Paramaters To Track Pulmonary Health And Disease, Carlos Domingo Ramos Rocha

Open Access Theses & Dissertations

Respiratory diseases are a great health concern. Early detection of disease could greatly improve quality of life and yet the most common pulmonary function test can be an unreliable diagnostic method, especially in the case of children. A reliable method of detecting and assessing small airway impairment could greatly help with timely diagnosis. This research approaches this problem by taking Impulse Oscillometry (IOS) data and its model-derived parameters and assessing their utility in tracking respiratory function and more specifically, small airway function.

This research first describes the use of electric circuits as models to describe lung properties at distinct regions …

Indentifying And Understanding User Preferences In Generic Planning Tools, Grisel Ventura

Open Access Theses & Dissertations

Planning is an important cognitive work activity. To support this complex task, the development of planning tools is important to support people during decision-making and problem-solving tasks. Nowadays, a large number of manual and electronic tools support this complex activity; manual and electronic planning tools aid people in creating strategies for effective work performance. However, there is limited information on the design of generic planning tools people use for their activities, and why people choose to use the planning tool they do. Some examples of generic tools for planning are calendars, checklists, agendas, etc.

To answer this question, this research …

Novel Photovoltaic Device For Targeted Drug Delivery, Sunny S. Ambure

Open Access Theses & Dissertations

Despite decades of research, progress in targeted drug delivery is relatively slow, hampered, in part, by the lack of appropriate mechanisms to deliver anticancer drugs selectively to tumor tissues. Systemic or oral administration can cause severe toxicity, which limits the therapeutic potential of anticancer drugs [1]. Therefore, the most important goal of drug delivery is to minimize the exposure of normal tissues to these drugs while maintaining their therapeutic concentration in tumors.

A photovoltaic cell (PV) is a system that converts lights into electricity as well as induces charge transfer by photovoltaic effect. Motivated by such unique property, we have …

Collaborative And Distributed Algorithms For Localization In Wireless Sensor Networks Based On The Solution Of Spatially Constrained Local And Sub-Local Problems, Juan De Dios Cota

Open Access Theses & Dissertations

In this research we present algorithms for the distributed and collaborative localization of nodes for applications in wireless sensor networks. The algorithms are distributed in the sense that each node can estimate its own position using only range information and position estimates from neighboring nodes. The algorithms aim at achieving good accuracy with low computational complexity and low energy consumption. We consider the full localization process consisting of an initialization stage followed by a refinement stage.

For initialization, we propose a \emph{bilateration} algorithm where each node uses a set of anchors and their respective ranges to solve a set of …

Analysis Of Endocrine Disrupting Compounds In Wastewater Treatment Plants: A Perspective Of Trans-Boundary Waterborne Pollution, Roberto De La Torre

Open Access Theses & Dissertations

Recent decades have brought an increasing concern of potential adverse human and ecological health effects resulting from Endocrine Disruptor Compounds (EDCs). In particular from new emerging compounds such as natural estrogens (e.g., 17©¬-estradiol, estrone), synthetic estrogens (e.g., 17Â¥á-ethynylestradiol), bisphenol A (BPA), nonylphenol ethoxylates (NPEOS), and nonylphenol (NP). These chemicals which are also known as organic wastewater contaminants are released directly to the environment after passing through wastewater treatment plants (WWTPs), which often are not designed to remove them from the effluent. The occurrence of the aforementioned compounds in surface water is becoming of increasing concern worldwide, and has led to …

Assessment Of Intra-Urban Traffic-Related Air Pollution On Asthmatic Children's Exposure At Schools In The Paso Del Norte Region, Amit Ugamraj Raysoni

Open Access Theses & Dissertations

Traffic-related air pollution can be a major public health concern in any urban area. This problem is compounded in the Paso del Norte region that has experienced rapid economic growth, and a substantial number of people living in close vicinity of major roadways. The desert surroundings, arid weather, frequent temperature inversions, heavy border traffic at the international ports of entry between El Paso and Ciudad Juárez, and poorly maintained vehicle fleet further exacerbates this problem. A growing body of air quality and epidemiologic research has discerned the linkage between traffic emissions and respiratory disorders.

Initial health investigations in the Paso …

Stability Analysis Of Anchored Rock Slopes Against Plane Failure Subjected To Surcharge And Seismic Loads, Md M. Hossain

Theses: Doctorates and Masters

The stability analysis of rock slopes has been a challenging task for engineers

because the rock mass constituting the slope often has discontinuities in various

forms, resulting in different types of slope failures. The plane failure is one of the

rock slope failures observed in field situations when the discontinuity is in the form

of joint planes. There are several parameters including surcharge and seismic loads

that govern the stability of the rock slope against plane failure in field projects. The

limit equilibrium approach for the estimation of the factor of safety of the rock slope

against plane failure has …

Vibration Diagnosis Of Elastic Shafts With A Transverse Crack, Cai Zhongyi

Theses: Doctorates and Masters

Detection of the shaft crack in a rotating machine is one of the most challenging problems in equipment predictive maintenance. In the available literature, various crack detection methods have been applied to study the dynamic behaviour of a cracked shaft. This study sought to attempt a vibration-based method. Elastic shafts with three different types of transverse cracks, including experimentally-induced fatigue crack, welded shaft crack, and wire-cut crack, were fabricated, and used to analyse the bending stiffness and frequency response in the vertical direction. The results from the cracked shafts were compared with that of an intact shaft. Bending stiffness of …

Neurorehabilitation Of The Hand Using The Cybergrasp[Tm] And Mirror Image, Amy Frances Boos

Theses

In recent years, researchers have explored the use of a mirror image as a means of rehabilitation for individuals suffering from hemiparesis. Through neuroimaging and functional testing, neurological improvement has been demonstrated in those that engage in mirror therapy. Bilateral training, or simultaneous movement of both sides of the body, has also been studied as a treatment method to improve function after cerebral vascular accident. The development of robotic systems to assist movement of the human body has played a major role in the fabrication of bilateral training devices.

In this experiment, the CyberGrasp™ robotic exoskeleton was used to assist …

Load-Bearing Capacity Of The Footing Resting On A Reinforced Fly Ash Slope, K S. Gill, J N. Choudhary, J N. Jha, Sanjay K. Shukla

Research outputs 2011

In several parts of the world, disposal of waste materials such as fly ash is a great problem. Application of waste materials as structural fills in foundations is one of the best solutions to disposal problems, because wastes can be used in large volumes in such applications. There may be difficulty due to poor load-bearing capacity of fly ash, especially when footing rests on the top of the fly ash fill slope. Inclusion of polymeric reinforcements as horizontal sheets within the fill may be one of the most viable solutions to improving the load-bearing capacity of reinforced fly ash slope, …

Adaptive Noise Canceller For Magnetocardiography, Valentina Tiporlini, Ngiah Nguyen, Kamal Alameh

Research outputs 2011

This paper discusses the use of adaptive noise cancellation in magnetocardiography system within unshielded environment using three algorithms: Least-Mean Squared (LMS) algorithm; normalized LMS (nLMS) algorithm and Genetic Algorithms (GA). Simulation results show that for low signal-to-noise ratio (SNR) values, the GA algorithm outperforms the other algorithms, displaying an improvement in SNR of 51.155 dB and completely suppressing the noise sources at 60 Hz and at low frequencies. However, the convergence time of the GA algorithm is longer due to the high computational complexity.

Optical Fibre Communications And Sensing System Experiments For Undergraduate Photonics Laboratories, Graham Wild, Geoffrey Swan

Research outputs 2011

Experiments in photonics tend to be reserved for postgraduate laboratories, where suitable equipment and resources are available. Simple optical fibre experiments may be included in some undergraduate programs, possibly utilising polymer optical fibres with LEDs and phototransistors, or with the use of bulk optical components and glass optical fibre elements. However, real optical fibre communication systems and optical fibre sensing systems utilise more complex devices, such as optical fibre Bragg gratings. With the availability of optical components in the 850nm wavelength range, a variety of practical systems can be realised using industry standard components. We show how to mitigate a …

Interpolation Of The Gnss Wet Troposphere Delay, Johnny Lo, Ahmed El-Mowafy

Research outputs 2011

Troposphere delay is one of the main distance-dependent errors in Global Navigation Satellite Systems (GNSS) observations. Precise estimation of the troposphere wet delay is necessary to aid ambiguity resolution and for positioning in network Real-Time Kinematic (RTK) and Precise Point Positioning. Wet tropospheric estimates can also serve as a source of atmospheric information to facilitate weather forecasting. Interpolation of the troposphere wet delay is thus required when its estimation is interrupted for short periods or when data are processed at higher intervals from that of available data. The objective of this research is to compare the performance of several interpolation …

Upgrade A Medium Size Enterprise Power System With Wind And Solar Sources: Design, Financial And Environmental Perspectives, Thair Mahmoud, Daryoush Habibi, Octavian Bass

Research outputs 2011

Efficient generation and distribution are crucial for economic power production. In this paper we discuss the planning and design of upgrading a medium size enterprise power system by installing Distributed Energy Resources (DERs), with particular emphasis on economic viability and environmental benefits. The planning for this project considers both conventional grid and SmartGrid connections. Project planning, installation challenges and governmental support of renewable energy projects in Australia are discussed. It is found that upgrading a medium size enterprise power system with DERs can yield reasonable levels of energy cost savings and greenhouse gas mitigation with both conventional grid and SmartGrid …

Load-Bearing Capacity Of Footing Resting On Multilayer Reinforced Fly Ash Slope, K S. Gill, A K. Choudhary, J N. Jha, S K. Shukla

Research outputs 2011

In several parts of the world, disposal of waste materials like fly ash is a great problem. Applications of some waste materials as structural fills in foundations is one of the best solutions to disposal problems, because wastes can be used in large volumes. There may be difficulty due to poor load-bearing capacity of fly ash, especially when footings are rested on the top of the fly ash fill slope; but inclusion of polymeric reinforcements as horizontal sheets within the fill may be one of the most viable solutions to improving the load-bearing capacity of reinforced fly ash slope. The …

Metal-Semiconductor-Metal (Msm) Photodetectors With Plasmonic Nanogratings, Narottam K. Das, Ayman Karar, C L Tan, Mikhail Vasiliev, Kamal Alameh, Yong Tak Lee

Research outputs 2011

We discuss the light absorption enhancement factor dependence on the design of nanogratings inscribed into metal-semiconductor-metal photodetector (MSM-PD) structures. These devices are optimized geometrically, leading to light absorption improvement through plasmon-assisted effects. Finite-difference time-domain (FDTD) simulation results show ~50 times light absorption enhancement for 850 nm light due to improved optical signal propagation through the nanogratings. Also, we show that the light absorption enhancement is strongly dependent on the nanograting shapes in MSM-PDs.

Design Of Modular Fixtures Using A 3d-Modelling Approach, U Farhan, M Tolouei-Rad

Research outputs 2011

The need for improved productivity and reduced time to market has been increased significantly in manufacturing processes in recent decades. There are many factors that play a role in providing manufacturing processes with more productivity. One is the use of modular fixtures (MFs). MFs have brought many benefits to manufacturing industries including reduced costs and times of production. An MF can be defined as a complete system that consist different elements for effectively and securely holding the workpiece in place for performing various machining operations. Generally an MF is made by assembling a number of fixture elements in a feasible …

Fuzzy Controlled Hydraulic Excavator With Model Parameter Uncertainty, Ganesh Kothapalli, Mohammed Hassan

Research outputs 2011

The hydraulic actuated excavator, being a non-linear mobile machine, encounters many uncertainties. There are uncertainties in the hydraulic system in addition to the uncertain nature of the load. The simulation results obtained in this study show that there is a need for intelligent control of such machines and in particular interval type-2 fuzzy controller is most suitable for minimizing the position error of a typical excavator’s bucket under load variations. We consider the model parameter uncertainties such as hydraulic fluid leakage and friction. These are uncertainties which also depend up on the temperature and alter bulk modulus and viscosity of …

Corrosion Behaviour Of Nanocomposite Tisin Coatings On Steel Substrates, Mohammad Ahmed, Paul Munroe, Zhong-Tao Jiang, Xiaoli Zhao, William Rickard, Zhi-Feng Zhou, Lawrence Li, Zonghan Xie

Research outputs 2011

Nanocomposite TiSiN coatings were deposited on tool steels. Detailed mechanisms that govern the corrosion of these coated steels were revealed, following immersion tests in a 70% nitric acid solution. Pitting originated preferentially from coating defect sites and expanded with increasing immersion time. Both Young’s modulus and hardness measured by nanoindentation decreased as the corrosion damage intensified. A thin oxide layer formed from the thermal annealing of the as-deposited samples at 900 °C was found to be effective against corrosive attack. In addition, compressive residual stress was noted to suppress the propagation of corrosion-induced cracks. The role of residual stress in …

Structure-Property-Performance Ofnnanocomposite Cr-Si-N Films Synthesized By A Duplex Surface Treatment Technique, Daohui Lai, Jiang Xu, Zong-Han Xie, Paul R. Munroe

Research outputs 2011

Nanocomposite Cr–Si–N films were prepared on to Ti–6Al–4V substrates by a novel duplex surface treatment technique. Coatings consisting of a Cr3Si surface layer were deposited using a double cathode glow plasma and subsequent surface plasma nitriding. The surface topography, chemical composition, and microstructure of these treated alloys were analyzed by a variety of surface characterization techniques. The resulting Cr–Si–N films consisted of nanocrystallite CrN grains embedded in amorphous SiNx phase. Nanoindentation tests showed that with increasing nitrogen partial pressure the hardness of the Cr–Si–N films increased and the elastic modulus decreased. Wear experiments showed that the Cr–Si–N films produced at …

High-Responsivity Plasmonics-Based Gaas Metal-Semiconductor-Metal Photodetectors, Ayman Karar, Narottam Das, Chee Leongtan, Kamal Alameh, Yong Tak Lee, Fouad Karouta

Research outputs 2011

We report the experimental characterization of high-responsivity plasmonics-based GaAs metal-semiconductor-metal photodetector (MSM-PD) employing metal nano-gratings. Both the geometry and light absorption near the designed wavelength are theoretically and experimentally investigated. The measured photocurrent enhancement is 4-times in comparison with a conventional single-slit MSM-PD. We observe reduction in the responsivity as the bias voltage increases and the input light polarization varies. Our experimental results demonstrate the feasibility of developing a high-responsivity, low bias-voltage high-speed MSM-PD.

An Optimal Current Control Strategy For A Three-Phase Grid-Connected Photovoltaic System Using Particle Swarm Optimization, Waleed Al-Saedi, Stefan W. Lachowicz, Daryoush Habibi

Research outputs 2011

A robust current control strategy for PV (photovoltaic) grid-connected systems is required for reliable use of solar energy as an abundant and clean renewable energy. This paper presents real time optimization parameters of the current control strategy for a 3-phase photovoltaic grid-connected Voltage Source Inverter (VSI) system. The proposed controller scheme is implemented based on a synchronous reference frame; the Phase-Locked Loop (PLL) is used as grid phase detector. Particle Swarm Optimization (PSO) algorithm is an intelligent searching algorithm that is used to implement the real time self-tuning method for the current control parameters. Two conventional PI controllers are used …