Improving Cal Poly Space Systems Infrastructure, Tyler Richier

Industrial and Manufacturing Engineering

The goal of this project was to increase the usable space for the club Cal Poly Space Systems to work on its projects, improve the safety for its members, and reduce the time it takes to manufacture its products. The project demonstrated the effectiveness of 5S in improving a workspace. Club members were measurably more comfortable in the work environment and spent less time looking for tools. Current rooms were made more professional by ridding the workplace of non-valued items and finding sensible locations for high-traffic items. Additional rooms were added and they should indisputably support club projects the upcoming …

Cardiac Staging Facility Workflow Redesign, Ryan Chang

Industrial and Manufacturing Engineering

This study analyzes and proposes Cardiac Staging nurse workflow improvements along with a new Cardiac Staging facility design at French Hospital. Currently, patients spend an expected 125 minutes in Cardiac Staging. It was found that 60% of the time in Cardiac Staging was spent waiting to be transferred into the Cath Lab. The following Industrial Engineering methods were utilized to eliminate waste in staging and design a new staging area:

 Use of Lean and Six-Sigma tools to recommend new patient arrival time

 Manufacturing product scheduling to reduce patient wait time

 Use of facility redesign techniques to improve …

A Review Of Zero Discharge Wastewater Treatment Systems Using Reed Willow Bed Combinations In Ireland, Sean O'Hogain, Liam Mccarton, Anna Reid, John Turner

Articles

The concept of a reed willow bed combination has the potential to achieve a zero discharge wastewater treatment system. This paper will present results from a two year study to monitor the performance of a reed willow bed facility at Lynches Lane, Co. Dublin, Ireland. Outline design specifications for the facility will be presented. Monitoring results for a two year period including influent and effluent parameters, rainfall, potential evapotranspiration, and soil classification will be presented and discussed. During the two year monitoring period the system achieved a zero discharge. This paper will discuss the potential widespread application of similar systems …

Mr. Robot: A Roborodentia Contestant, Stephen Berry, Jamie Nease

Computer Engineering

Roborodentia is an annual robotics competition held during Open House at California Polytechnic State University, San Luis Obispo. Each year, students construct autonomous robots which compete head-to-head to score the most points. This report will give an overview of the competition and the details of our robot.

An Investigation Into Ultrasonic Communication For Near-Body Networks, Eric Joshua Escudero Jr., Gursewak Singh Rai

Electrical Engineering

The following report presents a study of body-area, free-space ultrasonic communication system. Two analog communication systems are investigated. The initial communications system setup relies upon the amplitude modulation (AM) techniques to transmit the signal. Such a system is prone to noise since the amplitude of the signal is directly affected by distance and the signal strength will deteriorate. The secondary communication system involves utilizing frequency modulation (FM). This method avoids the issue of losing information due to amplitude deterioration, but encounters delay issues. The main hardware components used in the approach outlined include ultrasonic transducers (UTs) used for both transmitting …

Solar Powered Electric Clothes Dryer, Roger Mai, Alan Swe

Electrical Engineering

Appliances that consume the most energy in a household usually involve heating, and an electric clothes dryer is one such appliance, consuming up to 4KW of power. The most environmentally friendly way is to hang clothes outside to dry, a natural solar and wind powered method, but unfortunately most people are unable to do so as some neighborhood communities do not allow the hanging of laundry outside as it is regarded as “unsightly”, for example. This project aims to provide an alternate solution to the wall-powered electric clothes dryer by designing one which operates entirely off the grid.

Automated Adaptive Feeding Device, John Dolcini, Stephanie Smith, Pavel Yakovlev

Mechanical Engineering

No abstract provided.

Cal Poly Human Powered Helicopter, Josiah Auer, Eric Behne, Dave Berry, Rebecca Hennings, James Koch, Ian Marquardt, Josiah Mayfield, Sean Miller

Mechanical Engineering

The following report encompasses the Cal Poly Human Powered Helicopter team’s efforts during the 2010-2011 academic year. The intention of this project is to further the knowledge of human powered helicopter design and to validate an ideal configuration through experimental tests and analysis. 

A. Background

The Sikorsky Prize offered by the American Helicopter Society has been the catalyst for many attempts at Human Powered Helicopter (HPH) flight. The requirement to win the prize is a continuous, human powered flight of more than 60 seconds that stays within a 10 meter square box and reaches an altitude greater than 3 meters …

Portable Solar Desalination System, Genaro Sanchez, Alan Galarza, Erick Del Real

Electrical Engineering

Clean water and reliable energy can be difficult to obtain in remote locations such as desert villages, secluded islands, and other places where no fresh water can be found. The primary goal for this project is address these problems by implementing a portable desalinization plant system that is to be powered by solar energy PV system as the main energy source.

Terrain Classification For Autonomous Rmax Helicopter Search And Rescue, Erin West

Electrical Engineering

No abstract provided.

60 Watt Embedded Solar Cell Umbrella, Matthew Devoss

Electrical Engineering

No abstract provided.

Solar Instrumentation Lab, Rene Canedo Iii, Rong Gui Chen

Electrical Engineering

This project is a mobile platform that will allow experiments on different solar panels to be done easily while keeping the cost of the lab to a minimum. California Polytechnic State University’s motto is ‘learn by doing’ and this lab structure will allow students to get practical experience with photovoltaic cells and the instruments that are required to take measurements. The solar instrumentation lab is a potential hardware lab for the electrical engineering department’s Sustainable Electric Energy Conversion class EE 420 and Solar-Photovoltaic Systems Design EE 520. This group took the current solar structure as a base for the lab’s …

Cal Poly Power System Design & Analysis, Minesh D. Patel

Electrical Engineering

The scope of this project encompasses the design and analysis of the Cal Poly Power System at the distribution level using the SKM software environment. The purpose is to accurately model the power system in software so theoretical calculations and analysis can be executed. This requires sufficient preliminary research to obtain data for the main buildings on campus, sound interpretation of one line diagrams, designing the system within the software using realistic values and then performing analysis to model real world situations.  The data collected is under maximum load conditions for a specified time period using medium voltage parameters. The …

Exercise Bicycle Dc-Dc Converter For The Energy Harvesting From Exercise Machines Project, Ryan Rickard, Logan Stowe

Electrical Engineering

Project is a continuation of previous projects that seek an efficient DC to DC converter for the existing exercise bicycle system created by Mechanical and Electrical Engineering students. This DC-DC converter is to integrate with the wide range of DC voltages produced by the bicycle in order to produce a constant optimal voltage for charging a car battery. This converter will boost voltages when the bicycle outputs below the optimal voltage and buck voltages when above. The converter will take EHFEM one step closer to its overall and final goal of harvesting energy from the exercise machines in Cal Poly’s …

Programmable Solid State 12ax7 Triode Gain Stage, Ian Campbell

Electrical Engineering

This project demonstrates the viability of vacuum tube replacements made from solid state technology and programmable logic. A collection of operational amplifiers, digital converters and a field programmable gate array (FPGA) achieve this goal. The project emulates a 12AX7 vacuum tube triode as it would operate in a Fender Champ guitar amplifier. While the prototype works specifically with the Fender Champ, minor modifications could provide the versatility for operation in different amplifiers, including high end vintage hi-fi equipment. The addition of a micro controller into these amplifiers allows for the use of digital filtering and effects while not requiring modifications …

Rfid Techniques For Passive Electronics, Ryan Behr, David Cobos

Electrical Engineering

No abstract provided.

Design And Simulation Of V2g Bidirectional Inverter And Dc-Dc Converter, Allan Agatep, Mason Ung

Electrical Engineering

As plug-in hybrid electric vehicles (PHEV) become more popular, the utility companies are forced to feed the grid more electricity. However, these PHEVs are capable of providing power to the grid when they are parked serving as ancillary systems for grid regulation (V2G). Using a system based on photovoltaic (PV) technology, a design for a bidirectional inverter with LCL filter, and a bidirectional dc-dc with a constant current controller, was constructed using LTspice. Various papers were researched and analyzed to determine applicable designs for components. Simulations show the designs are capable of bidirectional power transfer. ETAP simulations show that delivering …

Development Of Wind Tunnel For Laboratory Wind Turbine Testing, Danny Alexander Zepeda

Electrical Engineering

A wind tunnel with a 0.5 HP motor was purchased by Cal Poly Electrical Engineering Department from Hampden for $16,000. It can only simulate winds of up to 10 MPH. The tunnel has a manual dial that controls the wind speed. It also measures the voltage and current output with an analog measure display. This wind tunnel was expensive and unfortunately cannot achieve very high wind speeds. For this reason, a similar wind tunnel with more potential and with a smaller budget was proposed to be built for use in the Sustainable Energy Lab. The new wind tunnel that was …

Streaming Client And Server Model, Austin Alan Diec

Computer Engineering

A few years ago, several Cal Poly undergraduates started the Autonomous Robot Platform (ARP). Interest in a revision of the ARP requires a new layer of communication. This paper describes the design and partial implementation of the communication layer to be used with the revised ARP. The communication layer would allow the autonomous robot platform to connect with a client over the wireless local area network (WLAN) for instructions and commands. It is important to note that currently, the assumed revision of the ARP is nonexistent, so many of the design decisions are based solely on the assumptions of ARP …

Resizable, Scalable, Concurrent Hash Tables, Josh Triplett, Paul E. Mckenney, Jonathan Walpole

Computer Science Faculty Publications and Presentations

We present algorithms for shrinking and expanding a hash table while allowing concurrent, wait-free, linearly scalable lookups. These resize algorithms allow the hash table to maintain constant-time performance as the number of entries grows, and reclaim memory as the number of entries decreases, without delaying or disrupting readers.

We implemented our algorithms in the Linux kernel, to test their performance and scalability. Benchmarks show lookup scalability improved 125x over readerwriter locking, and 56% over the current state-of-the-art for Linux, with no performance degradation for lookups during a resize.

To achieve this performance, this hash table implementation uses a new concurrent …

Design Optimization Of Gaas Betavoltaic Batteries, Haiyanag Chen, Lan Jiang, Xuyuan Chen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

GaAs junctions are designed and fabricated for beta voltaic batteries. the design is optimized according to the characteristics of GaAs interface states and the diffusion length in the depletion region of GaAs carriers. under an illumination of 10 mCi cm-263Ni, the open circuit voltage of the optimized batteries is about ∼0.3 V. It is found that the GaAs interface states induce depletion layers on P-type GaAs surfaces. the depletion layer along the P+PN+ junction edge isolates the perimeter surface from the bulk junction, which tends to significantly reduce the battery dark current and leads to a high open circuit voltage. …

Effectiveness Study On Temporary Pavement Marking Removals Methods, Yong Cho, Jae-Ho Pyeon

Nebraska Department of Transportation: Research Reports

This study was conducted to identify effective temporary marking removal methods and procedures on concrete and asphalt pavements. Pavement markings provide guidance to road travelers and can lead to accidents when not properly removed. Current state guidelines on removal do not provide clear and objective methods of measurement. After testing the most common removal methods, this research concluded that removing markings by chemical was not only cost and results-oriented effective compared to other methods, but it was also safe to the environment and road users. Finally, a baseline of measurements was developed by the research team for this project, along …

Non-Nuclear Method For Density Measurements, Yong-Rak Kim, Yong Cho

Nebraska Department of Transportation: Research Reports

Quality control (QC) and quality assurance (QA) are necessary to ensure fulfillment and compliance to specifications, guidelines, manuals, and programs which outline methods and requirements during construction. Density, an important part of quality control, can be used to evaluate the quality of Hot Mix Asphalt (HMA) and soil compaction. This study investigated new technologies used for QC and QA by comparing the Pavement Quality Indicator (PQI) model 301 with a nuclear gauge and core sample measurements for HMA. For soil QC and QA, non-nuclear technologies—the Electrical Density Gauge (EDG), the Moisture Density Indicator (MDI), and the Light Weight Deflectometer (LWD)—were …

Characterization Of A Pdms Microfluidic Reactor For Synthesizing Quantum Dots, Brian Harley

Materials Engineering

A PDMS microfluidic reactor was made in Cal Poly’s class 1000 clean room for the purpose of synthesizing quantum dots.  The device master mold was made from a silicon substrate and SU-8 features 50μm tall.  The PDMS reactor was cast from that mold.  The flow rates of fluid through the channels, heating of the reactor and pressure in the reactor were measured in order to characterize the potential for synthesizing quantum dots.  Flow rates of 20 mL/hr through 4 mL/hr were tested to characterize the consistency of amount of time the fluid remains in the reactor at a constant flow …

Design, Construction And Evaluation Of An Automotive Bridge Jack, Thomas Gomes Jr.

BioResource and Agricultural Engineering

This Senior Project discusses the design, construction and evaluation of an automotive lift. This lift will be hydraulically powered with a 6000 lb lifting capacity. The lift constructed in this project will be installed within a current 4 post drive on vehicle lift and allows the user to lift one axle of a vehicle a few inches off the ramp of the drive on lift in order to remove the tires.

Active Pen Input And The Android Input Framework, Andrew S. Hughes

Master's Theses

User input has taken many forms since the conception of computers. In the past ten years, Tablet PCs have provided a natural writing experience for users with the advent of active pen input. Unfortunately, pen based input has yet to be adopted as an input method by any modern mobile operating system. This thesis investigates the addition of active pen based input to the Android mobile operating system.

The Android input framework was evaluated and modified to allow for active pen input events. Since active pens allow for their position to be detected without making contact with the screen, an …

Poroelastic Finite Element Analysis Of A Heterogeneous Articular Cartilage Explant Under Dynamic Compression In Abaqus, Kelsey Kiyo Kam

Master's Theses

A poroelastic finite element model of a heterogeneous articular cartilage disc was

created to examine the tissue response to low amplitude (± 2% strain), low

frequency (0.1 Hz) dynamic unconfined compression (UCC). A strong correlation

has been made between the relative fluid velocity and stimulation of

glycosaminoglycan synthesis. A contour plot of the model shows the relative fluid

velocity during compression exceeds a trigger value of 0.25 μm/s at the radial

periphery. Dynamic UCC biochemical results have also reported a higher

glycosaminoglycan content in this region versus that of day 0 specimens. Fluid

velocity was also found not to be …

A Pmma Conductivity Pretreatment Microfluidics Device For The Optimization Of Electrokinetic Manipulations, Cameron Paul Purcell

Master's Theses

This project encompasses the design and development of a pretreatment microfluidic device for samples of physiological conductivity, namely a saline solution. The conductivity was reduced through the combination of dilution and ion removal using electric fields to enable downstream electro kinetic manipulations. The two major parts of this project include (1) designing a pretreatment protocol to reduce the conductivity of the sample solution to an acceptable level and (2) designing /fabricating a microchip that will effectively allow aim (1) to be performed on chip.

This project is one of the first to observe the effects of an electric field, used …

Value Landscape Engineering: Identifying Costs, Water Use, Labor, And Impacts To Support Landscape Choice., Kelly Kopp, Larry Rupp, Paul G. Johnson, Roger K. Kjelgren, David E. Rosenberg, Heidi Kratsch

CWEL Publications

We present a spreadsheet model that identifies the costs, water, labor, fertilizer, pesticides, fuel, energy, carbon emissions, and particulates required of and generated by a user-specified residential or commercial landscape over its economic life. This life includes site preparation, materials purchase, installation, annual maintenance and replacing landscape features that wear out or die. Users provide a variety of site-descriptive information and the model queries an extensive database of landscape data to calculate costs, required inputs, and impacts. We verified model results against observations of water, labor, fertilizer, and fuel use over eight years at three landscapes in the Salt Lake …

Development Of An In-Vitro Hyperglycemic Tissue Engineered Blood Vessel Mimic, Brian C. Wong

Biomedical Engineering

No abstract provided.