Digital Commons Network^™

Multi-Sensor Fusion For Manual Wheelchair State Estimation, Kathylee Pinnock Branford

Graduate Theses, Dissertations, and Problem Reports (ETD)

Kathylee Pinnock Branford Manual wheelchairs are essential to mobility and independence, yet accurately characterizing wheelchair motion in real-world environments remains challenging. Inertial measurement units (IMUs) provide a practical means of estimating wheelchair kinematics, but existing trajectory-reconstruction studies have largely been limited to short, controlled trials. This report developed and evaluated a four-IMU framework comprising one sensor on each rear wheel and two sensors on the wheelchair frame. Three orientation algorithms (VQF, Mahony AHRS, and Madgwick AHRS), two accelerometer ranges (±2 g and ± 4 g), and calibrated and uncalibrated sensor data were evaluated during indoor motion-capture trials and a outdoor …

Assessing Mobility And Upper Extremity Function Beyond Laboratory Settings In Manual Wheelchair Users With Spinal Cord Injury Using Inertial Measurement Units, Kathylee Pinnock Branford

Graduate Theses, Dissertations, and Problem Reports (ETD)

Manual wheelchair users with spinal cord injury (SCI) face chronic, repetitive shoulder demands that far exceed those of able-bodied daily life, placing them at high risk for rotator cuff pathology and long-term upper extremity dysfunction. Despite this burden, existing research has relied predominantly on brief laboratory assessments that capture only a narrow part of real-world mechanical demands, leaving critical gaps in the identification of true injury risk factors. This dissertation developed and applied inertial measurement unit (IMU)-based methods and novel algorithms to characterize arm use, mobility, and environmental context during a full week of free living behavior in 25 manual …

Sustainable Nutrient Management Opportunities For Small Communities In The U.S. With Lagoon Wastewater Treatment Systems, Denis Sigei Ruto

Graduate Theses, Dissertations, and Problem Reports (ETD)

Lagoon wastewater treatment systems are among the most widely used secondary treatment technologies serving small and rural communities in the United States due to their low capital and operating costs, minimal energy requirements, and operational simplicity. While effective for removal of organic matter and suspended solids, most lagoon systems were not designed to achieve advanced nutrient removal. As regulatory priorities increasingly emphasize control of total nitrogen and total phosphorus to protect receiving waters and public health, lagoon-dependent communities face growing compliance challenges. These challenges are exacerbated by aging infrastructure, limited technical capacity, financial constraints, and insufficient infrastructure data, highlighting the …

Engineering Plga Nanoparticle Size To Modulate Immune Responses After Spinal Cord Injury, Daniel J. Kolpek

University of Kentucky Doctoral Dissertations

Spinal cord injury is a severe and debilitating condition that often results in lifelong complications, including paralysis. Many of these chronic outcomes are driven by a sustained inflammatory response at the injury site, which limits tissue regeneration and functional recovery. As a result, therapeutic strategies that modulate this immune response have gained significant interest. Polymer based nanoparticle therapies have emerged as a promising approach due to their ability to interact with and influence immune cell behavior. Importantly, the physicochemical properties of nanoparticles can be precisely tuned to optimize these effects. Among these properties, size has been shown to influence key …

Utilising Video Recordings To Assess Student Pilot Performance: An Exploratory Study During A Simulated Training Flight, Bradley Moncion, Shi Cao, Allison Lynch, Suzanne K. Kearns, Elizabeth Irving, Ewa Niechwiej-Szwedo

Journal of Aviation/Aerospace Education & Research

In ab initio flight training, the quality of the feedback a flight instructor provides their student is essential to their success. While other high-performance and safety-critical industries have incorporated the use of video recordings into training and assessments, the aviation industry generally has not. There are some studies addressing the potential benefits of video recordings in training professional pilots, but there is a lack of research at the ab initio level. In this study, five flight instructors assessed the performance of student pilots conducting a simulated training flight using a 4-point marking scale. The flights instructors were then tasked with …

Architecting A Complex Adaptive System Model For Selecting Policies To Reduce Kidney Discard, Lirim Ashiku

Doctoral Dissertations

"The kidney allocation system is a complex, evolving system involving multiple heterogeneous agents. Each agent exhibits emergent behavior that may not fully align with the complex system goals. Therefore, there is a need for a transdisciplinary systems approach to visualize the interdependency among agents and understand the dominant patterns that shape the kidney allocation system.

First, this research presented an incremental hierarchical system engineering approach in identifying the agents’ needs and behaviors toward the complex systems’ goal of maximizing deceased donor kidney utilization and reducing kidney discard. The hierarchical systems approach linked with model-based system engineering aided in eliciting agents’ …

Probability Of Detection For Corrosion-Induced Mass Loss And Yield Strain In Metal Structures Using Fe-C Coated Long Period Fiber Gratings Sensors And Electroresistive Strain Gauges, Ying Zhuo

Doctoral Dissertations

"Graphene-based, Fe-C coated long-period fiber grating (LPFG) sensors individually reveal a causal relation between LPFG wavelength change and Fe-C mass loss. Their correlation parameters vary significantly between the sensors mainly because hydrophobic multilayer graphene and graphene oxide make sensor fabrication inconsistent. This study explores MXene-based, Fe-C coated LPFG sensors due to MXene’s inherent hydrophilic property in the presence of surface functional groups such as hydroxyl and oxygen and the probability of detection (POD) for mass loss from Fe-C coated LPFG sensors when deployed at a fixed location. A novel fabrication process incorporating Piranha solution pretreatment is proposed to ensure uniform …

Accelerating Circular Economy Transition For A Sustainable Built Environment: A Systems-Based Framework, Radwa Walid Yassin Eissa

Doctoral Dissertations

"The Circular Economy (CE) has gained momentum as a transformative framework for steering the construction value chain towards greater sustainability. However, this transition requires shifts in production and consumption patterns, adoption of circular business models, and the replacement of linear practices. Despite growing interest, CE adoption in construction faces persistent challenges, including sectoral fragmentation, lack of integrated governance frameworks, and limited coordination among stakeholders. This dissertation aims to accelerate the CE transition in the built environment through a multi-scale, interdisciplinary approach spanning five modules: (1) Module 1 develops a construction value chain-structured portfolio of CE strategies and assesses their implementation; …

Analytical And Empirical Data-Driven Risk-Governance Design Across The Different Phases: Creating Informed Policy Adjustments For The Transportation Project Lifecycle, Mariam A. Elazhary

Doctoral Dissertations

"Transportation infrastructure is a critical foundation for economic productivity, yet agencies still face challenges in translating the expanding transportation datasets into defensible, phase-specific risk-governance tools. This dissertation addresses this gap by developing analytical and empirical, data-driven approaches to support risk governance across the transportation project lifecycle. Module 1 uses a panel model with bid-letting data to examine how out-of-state contractor participation affects pre-award competition and to derive entry-governance rules. Module 2 analyzes nonfatal injury data through iterative multiple linear regression and fatality data through association-rule change mining to identify multi-factor safety-risk configurations and develop adaptive safety-governance provisions. Module 3 develops …

Lidar-Based Point-Cloud Human Modeling: Pose Estimation, Body-Parts Segmentation, 6g Localization, And Applications, Omar Rinchi

Doctoral Dissertations

"The human body represents a rich source of physiological and behavioral information, where precise analysis of anatomy, body parts, 3D pose, and motion enables cross-disciplinary precision applications. This dissertation formulates this challenge as a human modeling problem, where proposed algorithms convert the human body into a three-dimensional digital twin capturing anatomical structure and pose. These representations are further analyzed using additional algorithms to enable precision applications. To realize this vision, LiDAR sensing is adopted due to its privacy-preserving nature, robustness to lighting conditions, color-blind sensing characteristics, and decreasing cost.

Human modeling using LiDAR is challenging due to sparse, irregular, and …

Quantifying, Forecasting, And Mitigating Construction Labor And Material Challenges In A Dynamic Global Economy Using Econometrics And Deep Learning, Ahmed Gamal Elsayed Mohamed Shiha

Doctoral Dissertations

"The construction industry contributes to the global economy, yet its cost management practices remain constrained by labor shortages and material price volatility. These challenges are intensified by economic disruptions, geopolitical tensions, and trade policy shifts. Despite a growing body of literature, five knowledge gaps remain unaddressed: (1) the absence of dynamic, and localized measures of construction labor shortages; (2) limited empirical investigation of macroeconomic leading indicators of labor shortages; (3) underutilization of deep learning (DL) algorithms in forecasting local construction labor earnings; (4) the limited treatment of structural breaks in existing construction material price forecasting models; and (5) the lack …

Senescent Fibroblasts In Aging And Pulmonary Fibrosis, Sara B. Palega, Aiwei Y. Borengasser, Yan Y. Sanders

Department of Biomedical and Translational Sciences Faculty Publications

Aging is a major risk factor for many chronic lung diseases, including Idiopathic Pulmonary Fibrosis (IPF), a fatal and incurable disease characterized by progressive fibrotic remodeling. Age-associated structural alterations, impaired regenerative capacity, and dysregulated cellular signaling collectively create a pro-fibrotic microenvironment. A central driver of this pathological shift is the accumulation of senescent cells, which undergo irreversible growth arrest and develop a robust pro-inflammatory senescence-associated secretory phenotype (SASP). Emerging evidence identifies senescent lung fibroblasts as critical mediators of IPF pathogenesis. These cells promote excessive extracellular matrix deposition, myofibroblast differentiation, and tissue stiffening, while simultaneously impairing epithelial regeneration. Together, these effects …

Harnessing Activated Sludge For The Treatment Of Hydrothermal Liquefaction Wastewater: A Proof-Of-Concept Study, Cyrus Li, Jiefu Wang, Meicen Liu, Yi Zheng, Sandeep Kumar, Isamu Umeda, Chandan Mahata, John Norton

Civil & Environmental Engineering Faculty Publications

Although hydrothermal liquefaction (HTL) is the leading technology in converting wet biomass into bioenergy, the treatment of its toxic-laden aqueous phase wastewater presents a major challenge on its path toward commercial viability. This study presents the first-ever assessment of sewage sludge-fed HTL wastewater (SS-HTLWW) treatment and toxic compound removal using municipal activated sludge (AS) by optimizing its cultivation condition. It was found that AS with optimized pretreatment can remove up to 91.2% of the soluble chemical oxygen demand (sCOD) in SS-HTLWW, of which up to 82% can be attributed to biological mineralization and adsorption of sCOD by AS. Conventional bioprocess …

Nature-Based Solutions For Urban Resilience And Environmental Justice In Underserved Coastal Communities: A Case Study On Oakleaf Forest In Norfolk, Va, Farzaneh Soflaei, Mujde Erten-Unal, Carol L. Considine, Faeghe Borhani

Civil & Environmental Engineering Faculty Publications

Climate change and sea-level change (SLC) are intensifying flooding in U.S. coastal communities, with disproportionate impacts on Black and minority neighborhoods that face displacement, economic hardship, and heightened health risks. In Norfolk, Virginia, sea levels are projected to rise by at least 0.91 m (3 ft) by 2100, placing underserved neighborhoods such as Oakleaf Forest at particular risk. This study investigates the compounded impacts of flooding at both the building and urban scales, situating the work within the framework of the UN Sustainable Development Goals (UN SDGs). A mixed-method, community-based approach was employed, integrating literature review, field observations, and community …

Modeling Hepa Filter Media Performance And Evaluation Of Filtration Leak Test Success, Daniel M. Abraham, Steven J. Eckels, Shahin N. Amiri

Civil & Environmental Engineering Faculty Publications

This research presents a cost-effective microscale modeling analysis of high-efficiency particulate air (HEPA) filter media. We analyzed leak-free and leaking media with known leak sizes. A three-dimensional fibrous model with non-homogeneous fiber diameters (0.2–2 µm) and a packing density of 7.5% was developed to replicate a HEPA filter sheet (H14) microstructure. The objective was to simulate and analyze the pressure drop and collection efficiency of nanofibrous media for aerosol particles with a diameter of d_p ≤ 0.5 µm. The results were compared to prior experimental and theoretical models, exhibiting a high level of agreement with pressure drop and efficiency …

Resilient Built Environment: An Overview On Design Strategies For Coastal Adaptation To Sea Level Rise, Farzaneh Soflaei, Gelareh Abdolzadeh, Navid Ziaee, Mohammad Amin Jafari, Faeghe Borhani

Civil & Environmental Engineering Faculty Publications

This paper delves into the escalating risks faced by urban coastal communities due to tidal and storm flooding, exacerbated by climate change-induced Sea Level Rise (SLR). Projections indicate a potential increase in sea levels by at least 3 feet by 2100, with historical data revealing an average annual rise of 1.2-1.7 mm since the 1900s. With over 300 million individuals inhabiting coastal areas, low-lying regions emerge as particularly vulnerable to the impacts of SLR. This accelerated rise amplifies the significant challenge of nuisance flooding, a local-scale issue aggravated by high tide and winds, leading to inundation, road closures, infrastructure deterioration, …

Revisiting The Life Cycle Of Margalefidinium Polykrikoides Group Iii, Eduardo Pérez-Vega, Kenneth N. Mertens, Pjotr Meyvisch, Margaret R. Mulholland

OES Faculty Publications

Dinoflagellates produce cysts as a strategy to withstand environmental stressors, with nutrient depletion generally considered a key trigger for cyst production. Resting cysts are thick-walled, typically composed of one to several layers, and characterized by a prolonged dormancy period. In contrast, pellicle cysts possess a thin, single wall and exhibit no dormancy or a markedly shorter dormancy than resting cysts of the same species. Margalefidinium polykrikoides produces pellicle and resting cysts, whereas its congener, M. fulvescens, has been shown to produce pumpkin-like structures. Using phase-contrast microscopy, time-lapse microscopy, FlowCam, and attenuated total reflection Fourier transform infrared microspectroscopy (ATR μ-FTIR), …

Formalizing Asymmetric Control-Telemetry Separation In Distributed Industrial Control Systems, Andrew Manison

College of Graduate Studies: Theses & Dissertations

Distributed industrial control systems often place control and telemetry traffic on the same communication substrate even though the two workloads impose different requirements. Control paths need bounded request-response latency and predictable acknowledgement semantics, whereas telemetry paths benefit from scalable publish-subscribe fanout and tolerance for consumer-side delay. This thesis argues that, for the tested class of mixed workloads on shared commodity infrastructure, these communication roles should be separated architecturally rather than forced through a single protocol. To evaluate that claim, the thesis formalizes an asymmetric control- telemetry pattern and instantiates it in the Asymtra framework using gRPC for synchronous control and …

Effect Of Wall Movement On Porosity Formation In Ductile Iron Castings Under Varying Processing Parameters, Shamsul Alam

College of Graduate Studies: Theses & Dissertations

Shrinkage porosity is a major defect that significantly impairs the mechanical properties and overall performance of ductile iron castings. Although graphite formation during solidification induces volumetric expansion, this expansion alone is insufficient to fully compensate for the shrinkage occurring throughout solidification. During the solidification and cooling of ductile iron, multiple phase transformations occur, resulting in dynamic volume changes that exert pressure on mold walls and internal cavities. These pressures can deform mold walls and casting surfaces, leading to defects such as swell and porosity, while also influencing shrinkage formation. This study aims to analyze the mechanisms of porosity formation and …

A Novel Superaug Adaptive Data Augmentation Strategy For Metabolic Syndrome Prediction: The First Egyptian National Cohort Study With Multi-National Comparison, Nihal Elsonny, Ashraf Elsharkawy, Abeer Tawakol, Amira Y. Haikal

Mansoura Engineering Journal

Metabolic Syndrome (MetS) is a multifactorial disorder associated with an increased risk of cardiovascular disease, type 2 diabetes, and obesity-related complications. Early and accurate prediction of MetS remains challenging due to heterogeneous data sources, class imbalance, limited sample sizes in regional studies, and poor generalization across populations.

This study introduces a comprehensive machine learning framework for predicting MetS and its prognostic factors using two heterogeneous datasets: a newly collected Egyptian clinical cohort and the U.S.-based (NHANES) [CDC, 2023] dataset. For each dataset, multiple experimental pipelines are developed, integrating preprocessing, feature selection, data augmentation, hyperparameter tuning, and ensemble modeling. …

Warm Mix Asphalt: Key Issues, Performance Challenges, And Modeling Advances, Mahmoud Owais, Marwa Awad

Mansoura Engineering Journal

Warm Mix Asphalt (WMA) has emerged as a sustainable alternative to conventional Hot Mix Asphalt by enabling asphalt production and compaction at reduced temperatures, thereby lowering energy consumption, emissions, and worker exposure to heat and fumes. Despite these advantages, the field performance of WMA remains influenced by technology-specific mechanisms, additive–binder compatibility, aggregate characteristics, moisture susceptibility, compaction quality, recycled material content, and climatic conditions. This review provides a critical synthesis of major WMA technologies, including foamed systems, chemical additives, organic waxes, hybrid additives, bio-based modifiers, and WMA mixtures incorporating reclaimed asphalt pavement. Particular attention is given to how these technologies affect …

A Hybrid Geospatial And Remote Sensing Methodology For Drought Vulnerability Assessment In Semi-Arid Ecosystems, Kaifi Fakhir Chomani

Mansoura Engineering Journal

The Kurdistan Region of Iraq (KRI) faced significant drought challenges due to global and environmental changes, necessitating drought assessments. Advanced techniques of remote sensing, Geographic Information Systems (GIS), and Analytic Hierarchy Process (AHP) were combined in this research to perform drought vulnerability zonation for KRI. Average annual rainfall, Average number of rainy days, Average annual temperature, slope, elevation, normalised difference water index (NDWI), normalised difference vegetation index (NDVI), land surface temperature (LST), and temperature condition index (TCI) were selected as contributing parameters for drought vulnerability assessments. The considered parameters were weighted using pairwise comparison, and thematic maps were created to …

Psychological Impact Of Cultural Heritage Vr Experience Using Well-Mind Framework. (Case Study: Mahmoud Sami Palace In Mansoura)., Sara Ahmed El-Bayoumi, Hager Ahmed El-Sayed El-Ayouti, Mohamed Mohamed Shawki Abo Leila

Mansoura Engineering Journal

This study examines the psychological effects of immersive virtual reality (VR) experiences designed to preserve and disseminate intangible cultural heritage. It addresses the growing challenge of declining cultural engagement and the need for innovative tools that support psychological well-being, emotional engagement, and cultural connection. A VR-based reconstruction was developed within the historic Mahmoud Sami Al-Baroudi Palace in Mansoura, Egypt, focusing on traditional Egyptian practices and oral storytelling. The evaluation employed the WELL-MIND framework alongside participant feedback to assess both structured well-being indicators and subjective user experiences. The WELL-MIND-based assessment indicated improvements in cognitive stimulation, emotional engagement, and environmental perception. In …

The Multiwalled Carbon Nanotube-Incorporated Cfrp Laminates Interlaminar Fracture Toughness, Nikhil Janardan Rathod, Markala Karthik, Harshvardhan P. Ghongade, Javed Sikandar Shaikh, Rahul Soma Deshmukh

Mansoura Engineering Journal

The structural integrity of carbon fibre reinforced polymers (CFRPs) suffers from damage caused by interlaminar cracking and delamination which diminishes their performance capabilities. This study provides an experimental analysis of the impact of carboxyl-functionalized multi-walled carbon nanotubes (MWCNTs) on the Mode I interlaminar fracture toughness of CFRP laminates. The researchers created composite specimens by using epoxy systems which included MWCNT loadings of 0.1 wt% 0.2 wt% and 0.3 wt% together with an unmodified control. The researchers conducted Double Cantilever Beam (DCB) testing according to ASTM standards to ascertain the rate of critical strain energy release (G_IC) of the material. The …

Preserving The Identity Of Historic Coptic Orthodox Monasteries In Egypt Under Contemporary Pressures: Case Studies Of St. Bishoy And St. Anthony Monasteries, George Medhat Adeeb, Mohamed Khairy Amin, Mohamed Ahmed Al-Sherbiny

Mansoura Engineering Journal

Historic Coptic Orthodox monasteries in Egypt (HCOMEs) represent an important component of Christian heritage, integrating architectural value with enduring spiritual traditions that reflect both tangible and intangible dimensions. However, contemporary development and changing functional demands are generating transformations that may affect their identity if not carefully managed. Despite extensive scholarship, limited research has systematically examined these transformations through a structured evaluative approach. This study addresses this gap by developing and applying an analytical and evaluation framework to examine how contemporary pressures influence the historical, architectural-spatial, and spiritual identity of HCOMEs, and to assess the effectiveness of monastic responses. The framework …

Self-Lubricating Nano-Coatings For Tribological Applications: Materials, Mechanisms, And Ai-Driven Design Approaches, Viral Panara, Vikas Panchal, Satayu Travadi, Harmish Bhatt, Madhav Oza

Mansoura Engineering Journal

Self-lubricating coatings with nanostructured structures are becoming crucial in order to decrease friction and wear in critical tribological systems like precision tools, biomedical implants, aerospace actuators, and engines. In this review, the most representative nano-engineered solid lubricants such as transition metal dichalcogenides, diamond-like carbon, hexagonal boron nitride, graphene, MXenes and hybrid multilayer architectures are discussed. The focus of the discussion is on the most important tribological mechanisms like lamellar sliding, oxidative adaptation, tribofilm formation, transfer-film development, and nano-asperity contact evolution. It also summarizes the most significant deposition techniques, such as cathodic arc physical vapor deposition, chemical vapor deposition, plasma-based deposition, …

A Comparative Analysis Of Explainable Ai (Xai) Techniques For Transparent And Reliable Image Classification, Sovon Chakraborty, Shakib Mahmud Dipto, Kevin R. Pilkiewicz, Michael L. Mayo, Pratip Rana

Computer Science Faculty Publications

Evaluating the trustworthiness of black-box machine learning models remains a significant methodological challenge. Their lack of transparency and interpretability limits applicability, because stakeholders often seek transparency before trusting the results of black-box machine learning models. Explainable AI (XAI) methods provide for human-understandable justifications and informed decision-making of these black-box architectures. Therefore, it is imperative to select the proper XAI model tailored to specific tasks. In this research, we focus on examining four XAI techniques: PEEK, LRP, GRAD-CAM, and LIME to understand how they perform against each other for image classification tasks. We evaluate the performance, robustness, generalizability, noise stability, and …

Harnessing Mono-2-(Methacryloyloxy) Ethyl Succinate Grafting For Robust Micro/Nanoplastic-Resistant Ultrafiltration Membranes, Mohadeseh Najafi, Javad Farahbakhsh, Mitra Golgoli, Michael Johns, Masoumeh Zargar

Research outputs 2022 to 2026

The growing presence of microplastics (MPs) and nanoplastics (NPs) in water systems poses a serious threat to conventional treatment processes, particularly membrane filtration. This study focuses on a surface modification strategy for commercial ultrafiltration (UF) membranes via plasma-induced grafting of mono-2-(methacryloyloxy) ethyl succinate (MMES) to enhance resistance against MP/NPs fouling. The membranes were characterised using advanced analytical techniques, including high-resolution scanning electron microscopy (HRSEM), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM), confirming successful grafting, increased hydrophilicity, and a more negative surface charge. At optimal conditions of grafting (2 min pretreatment, 0.5 M monomer concentration, and 3 h grafting …

Photocatalytic Degradation Of Cephalexin, Amoxicillin, And Phenol Red Using A Green-Synthesized Folic Acid–Zno–Bi2o3 Nanoporous System, M. Sarani, Haghighi, P. Tamaddon, A. Najafidoust, P. Faghani-Eskandarkolaei, N. Sattarahmady

Research outputs 2022 to 2026

The persistent presence of pharmaceutical pollutants like amoxicillin (AMX) and cephalexin (CPX), and industrial dyes such as phenol red (PR) in wastewater poses serious ecological and public health risks, including antibiotic resistance. It necessitates efficient and low-cost remediation technologies. Photocatalysts employing innovative and engineered nanomaterials such as bismuth oxide (Bi2O3) and zinc oxide (ZnO) nanostructures exhibit considerable potential for eliminating pollutants. This study focused on the photodegradation of AMX, CPX, and PR utilizing green-synthesized folic acid–ZnO–Bi2O3 nanoparticles (F-Zn-Bi NPs) under visible light irradiation. Characterization of the synthesized photocatalyst was conducted using various techniques of powder x-ray diffraction (PXRD), field emission …

Fracture Energy Of Ambient-Cured Fly Ash-Based Geopolymer Concrete, Alireza Mohyeddin, Trijon Karmokar, Mohammad Fardipour

Research outputs 2022 to 2026

Fracture energy is a key parameter in current prediction models for capacity of structural anchors. During broader research on behaviour of structural anchors in ambient-cured fly ash-based geopolymer concrete, it was realised that despite extensive literature on Ordinary Portland Cement (OPC) and other types of geopolymer concrete, there is a lack of literature on fracture energy of such geopolymer concretes. The purpose of the current research is to measure this property for this specific type of concrete using Wedge Splitting Test (WST) method. This method was selected due to its stable crack propagation and suitability for small-sized specimens. The influence …