Digital Commons Network^™

Mycelium-Based Composites Using Minimally Processed Industrial Hemp Biomass: Impact Of Species And Feedstock Ratio On Mechanical Performance Compared To Polystyrene Packaging, Radika Bhaskar, Tanisha Rutledge, Kevin Trangone, Oneal Latimore

School of Design and Engineering Papers

Mycelium-based composites (MBCs\) are formed from lignocellulosic substrates and biopolymer matrices derived from fungal mycelium. Due to their low fossil energy demand and biodegradability, MBCs represent a versatile and sustainable material suitable for a range of applications, with increasing interest focused on packaging. Hemp fibers are an example of natural fibers with great promise as a substrate to improve the mechanical properties of MBCs. However, the separation of bast and hurd fiber requires processing and commercial-scale facilities that are logistically challenging and may be cost-prohibitive. Here, the potential for minimally processed hemp, with no separation of fibers, is evaluated for …

Neuromodulation In Olfactory Networks: Inferring Circuit Motifs And Predicting Behavioral Outcomes From Neural Response Changes, Yelyzaveta Bessonova

McKelvey School of Engineering Graduate Student Theses & Dissertations

Many organisms rely on olfaction to navigate their environment in response to surrounding chemical cues. Within the olfactory system, first, external signals are transduced into neural activity patterns that drive a diverse array of behavioral responses. However, sensory processing alone does not fully account for this variability. Fluctuations in neuromodulator levels are equally critical in shaping how olfactory information is encoded and translated into behavior. The goal of this dissertation is to investigate how changes in the neurochemistry within the olfactory circuit influence neural signaling and, ultimately, behavioral responses. To achieve this, I investigated how three neuromodulators: serotonin, dopamine, and …

Construction Project Performance Research: A Bibliometric, Scientometric, And Qualitative Review (1989–2023), Abdelnaser Abdelhameed, Mohamed S. Yamany, Ahmed Abdelaty, Emad Elbeltagi

Faculty Publications

Despite the significant increase in publications on construction project performance (CPP), there is a deficiency of research that rigorously assesses and synthesizes previous studies to delineate the field’s development, themes, and research gaps. This article employs quantitative and qualitative methodologies to critically evaluate studies on CPP published over the last three decades and indexed in the Scopus database. The quantitative approach includes bibliometric searches and scientometric analyses to assess the extent of research interest and achievements. The qualitative methodology aims to conduct thorough content analysis to classify existing material based on prevalent themes. The results demonstrate an exponential growth of …

Data For "Unified Vapor Pressure Correlations For Lanthanide And Actinide Chlorides: An In-Depth Statistical And Thermodynamic Approach", J. Marvin Torrie, Nicolas Marvin Christensen, Kyle Duke, Carlos Mejia, Larry Baxter, Devin Rappleye

ScholarsArchive Data

This submission contains machine readable data (.csv) for all data from the publication "Unified Vapor Pressure Correlations for Lanthanide and Actinide Chlorides: An In-depth Statistical and Thermodynamic Approach". It contains the data contained in all figures in the paper and its supplementary material except for the water vapor pressure data in Figures 1 and 2. In addition, this submission contains all the original vapor pressure measurements (241 sets) from the sources reviewed in the paper.  Sufficient information is provided that readers can identify the original sources of these data sets if needed.

Biologically-Inspired Multiscale Neuromorphic Architecture, Christian O'Reilly, Ramtin Zand

Publications

This white paper proposes a biologically-inspired multiscale neuromorphic architecture that bridges key gaps between artificial neural networks (ANNs), spiking neural networks (SNNs), and biological neural networks (BNNs). While SNNs offer promising energy efficiency, their broader adoption remains limited by suboptimal performance and the need for novel learning paradigms. To address these challenges, the proposed framework integrates structural and functional principles observed in the brain, including hierarchical organization, sparse and modular connectivity, predictive coding, and diverse neuronal dynamics.

The architecture operates across micro-, meso-, and macro-scales, incorporating neuron-level diversity (e.g., excitatory/inhibitory and principal/support cells), canonical microcircuits (CMCs), and large-scale hierarchical organization. …

Use Of Gamma-Ray Spectroscopy In Thickness Gauging Of A Complex-Shaped Lead Shield, Joseph T. Graham, Brian Durtschi, Ashish Avachat, Seth Kilby

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

Methods for measuring the thickness of lead shielding based on ⁶⁰Co gamma-ray spectroscopy are presented. In applications where a shield's thickness is multiple mean free paths and the shield has a complex shape (i.e. cannot be approximated as a simple solid such as a slab, sphere, semi-infinite medium, etc.), the necessary buildup factors are not available. Thus, determination of shield thickness by means of the Beer–Lambert law requires separating the counts from uncollided photons from the scattered photon contribution. It is demonstrated how the 1332 keV gamma ray of ⁶⁰Co can be used to precisely quantify lead thicknesses …

Modeling And Characterizing The Electron Backscatter In A Cylindrical Anode-Based Distributed X-Ray Source, Jordan Fox, Seth Kilby, Hyoung Koo Lee, Ayodeji Alajo, Ashish Avachat

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

Upcoming advancements in computed tomography architectures warrants the investigation of new X-ray source designs and the impacts that electron backscatter can have on these designs. One such design being investigated is a distributed, cylindrical anode-based X-ray source. For such a distributed X-ray source, we developed a modeling pipeline for simulating electron optics and transport to characterize the quality of the primary X-ray beam and the electron backscatter behavior. We report our results on the energy distributions of the bremsstrahlung spectra; electron backscatter ratio; and spatial, temporal, and energy distributions of backscattered electrons that return to the anode.

Nondestructive Burnup Evaluation And Gamma Spectroscopy Analysis Of Spent Fuel Elements In The Itu Triga Mark Ii Research Reactor, A. Kaya, O. Erbay, Z. Boduroglu, I. A. Reyhancan, M. S. Kiziltas, T. Akyurek

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

This study presents a comprehensive burnup analysis of all fuel elements in the ITU TRIGA Mark II research reactor core using non-destructive assay (NDA) techniques based on gamma spectroscopy. Two distinct fuel inspection systems were employed to measure the gamma activity, with¹³⁷Cs used as the primary burnup indicator due to its strong correlation with fuel depletion. The results show a clear burnup pattern, with higher values in the inner core rings that gradually decreases toward the outer rings. This asymmetric burnup distribution underscores the need for reactor core reconfiguration, for which an optimized layout is proposed. Additionally, gamma …

Hybrid Data-Driven Cement-Stabilized Soil Design: An Integration Of Machine Learning, Multi-Objective Optimization, And Life Cycle Assessment, Chikezie Chimere Onyekwena, Yunli Li, Ikenna J. Okeke, Ubani Obinna Uzodimma, Monday Uchenna Okoronkwo, Wenping Wu

Chemical and Biochemical Engineering Faculty Research & Creative Works

Soil stabilization is crucial in geotechnical engineering, yet conventional methods are often time-consuming, resource-intensive, and environmentally unsustainable. Despite growing interest in Machine Learning (ML) and optimization tools for mix design, few studies integrate these methods with decision-making techniques and environmental assessment to support practical implementation. This study proposes a hybrid data-driven framework for predicting strength, optimizing mix compositions, and evaluating environmental impacts via life cycle assessment of cement-stabilized soft soils. Six ML models were evaluated, and the top-performing eXtreme Gradient Boosting (XGB) model was further improved using the Grey Wolf Optimizer (GWO). The optimized XGB-GWO model, integrated with a polynomial …

Advances And Challenges In Nano-Modified Cementitious Composites: Mechanisms, Dispersion Strategies, And Impact On Mechanical Properties, Fatemeh Mohammadi Ghahsareh, Pengwei Guo, Nusrath Jaha, Yi Bao, Kamal H. Khayat, Weina Meng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Nanomaterials are increasingly utilized to enhance the mechanical properties, durability, and functionality of concrete materials but face challenges such as agglomeration and uneven dispersion in cementitious systems, which can offset the intended improvements. This paper reviews the advances and challenges associated with nano-modified cementitious composites, elucidating fundamental mechanisms and highlighting strategies for overcoming the challenges through experimental and computing techniques. The reviewed contents include (1) the classification of nanomaterials commonly used in cementitious systems and the mechanisms through which they enhance the mechanical properties of cementitious composites; (2) challenges of nanomaterials such as agglomeration in water, re-agglomeration in cementitious systems, …

Zirconium And Hafnium Interdiffusion Study In Zrb2–Hfb2 System, Yue Zhou, Ana C. Feltrin, William G. Fahrenholtz, Gregory E. Hilmas

Materials Science and Engineering Faculty Research & Creative Works

Interdiffusion of Zr and Hf in the diboride system was investigated. High-purity zirconium diboride (ZrB₂) and hafnium diboride (HfB₂) were prepared by a combination of boro-/carbothermal reduction synthesis and densification by spark plasma sintering. The bulk ceramics had relative densities of 99.3% for ZrB₂ and 99.7% for HfB₂, and both ceramics were phase-pure by x-ray diffraction analysis. Diffusion couples of ZrB₂ and HfB₂ were annealed at temperatures ranging from 2000°C to 2200°C for times from 4 to 12 h. Zr and Hf elemental concentration profiles were measured using energy dispersive spectroscopy …

Hold Paramount The Health, Safety, And Welfare Of The Public And The Planet, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Tip Penetration Test For Rapid In-Line Assessment Of Static Yield Stress During 3d Concrete Printing Process, Ali Fasihi, Nicolas A. Libre

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The static yield stress of printable cementitious materials is a critical parameter governing the shape stability and buildability of 3D printed concrete structures. Among various testing techniques, the penetration test has emerged as a promising method for in-situ measurement of static yield stress during printing process. However, the applicability of the penetration test for in-line monitoring of static yield stress remains limited due to the necessity for substantial material thickness. To address this challenge, this study proposes a novel tip penetration test, which enables static yield stress determination without the requirement for full cone submergence, thereby facilitating assessment of thin …

Rheological And Micro Properties Of High-Viscosity Binder-Incorporated Polyphosphoric Acid And Rock Asphalt, Feng Ma, Xinye Jiang, Zhen Fu, Chongxin Zhu, Jenny Liu, Ke Shi, Yalu Wen, Yao Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

To enhance the performance of high-viscosity modified asphalt (HVMA), polyphosphoric acid (PPA) and North American rock asphalt (NA-RA) were incorporated into styrene-butadiene-styrene (SBS)/crumb rubber (CR) composite modified asphalt, resulting in two distinct types of HVMA. The two HVMA types were evaluated at various dosages using a dynamic shear rheometer (DSR), bending beam rheometer (BBR), fluorescence microscope (FM), and Fourier infrared spectroscopy (FT-IR) tests. These tests provided both macroscopic and microscopic insights into their properties. The findings indicated that both PPA and NA-RA modify the asphalt's internal structure, enhancing its temperature resistance. PPA primarily improved high-Temperature performance, while NA-RA enhanced low-Temperature …

A Rapid Field Moisture Measurement Unit For Compaction Acceptance Of Unbound Materials, Chuanjun Liu, Xiong Zhang, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The moisture content (MC) was a critical parameter that needed to be monitored in geomaterial compaction. Nuclear density gauges (NDGs) had been the practice in MC and density measurement for decades but had become less desirable due to cost, regulatory, and safety concerns. Meanwhile, lightweight deflectometers (LWDs), proposed as an alternative to NDGs, did not have a function of MC measurement. This study aimed to identify a rapid field moisture analyzer to work with LWDs for evaluating the compaction acceptance of unbound materials in situ. The study started with evaluating the effectiveness and practicability of two existing moisture analyzers recommended …

Influence Of Wicking Geotextile Installation On Moisture Migration In Silt Under Rainfall Infiltration, Yipeng Guo, Dahao Zou, Min Hu, Xiong Zhang, Fang Xu, Yongjie Zhang, Jiejing Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Silt is widely used in subgrade construction in the middle and lower reaches of the Yellow River in China due to limited availability of high-quality fill. However, its high moisture sensitivity and low strength often lead to pumping, settlement, and deformation. This study investigates the hydraulic performance of a wicking geotextile in silt under simulated rainfall infiltration using one-dimensional soil column experiments. Three installation configurations were evaluated: (i) a control sample (CS) without geotextile, (ii) an embedded sample (ES) with the geotextile fully installed as a capillary barrier, and (iii) a surface-exposed sample (SES) with the geotextile extended to the …

Coe Annual Technical Review 2025, Jianshun Zhang, Bing Dong

SyracuseCoE

No abstract provided.

Influence Of Superhydrophobic Surface Microstructure On Transient Jet Impingement Cooling, D. Jacob Butterfield, Brian D. Iverson, Daniel Maynes, Julie Crockett

Faculty Publications

Water jet impingement is an effective method of rapidly cooling a surface, but heat transfer from the surface is highly dependent on the surface condition and properties. Here, the impact of a superhydrophobic (SH) surface on heat transfer to an impinging, axisymmetric, room-temperature water jet with Re=6 x 10³to 18 x 103 is explored. SH surfaces are created by etching thin silicon wafers to form different micropatterns (posts or holes). Surfaces are heated to between 200 and 320°C, and the local surface temperature is measured with a thermal camera. The time resolved heat transfer from the surface and …

Thermodynamic Analysis Of Metal Segregation In Two Metal Boride-Carbide Ceramics Containing V With Cr, Hf, Ti, Or Zr, Ana C. Feltrin, Simon Divilov, Gregory E. Hilmas, Stefano Curtarolo, William G. Fahrenholtz

Materials Science and Engineering Faculty Research & Creative Works

Dual-phase carbide-boride ceramics in different vanadium-Me (Me = Cr, Hf, Ti, and Zr) binary systems were synthesized by boro/carbothermal reduction under stoichiometric and carbon-deficient conditions and densified by spark plasma sintering. Thermodynamic analysis was used to evaluate the influence of composition on the phase stability and metal segregation between phases, along with the resulting effects on microstructure and hardness. Pairing vanadium with Group IV elements (Hf, Ti, and Zr) consistently formed one boride and one carbide phase, while the Cr-V system formed a monoboride phase and a carbon-deficient carbide. Metal segregation trends depended on composition. Vanadium preferentially segregated to the …

The Role Of Spatial Abilities In Stem Learning And The Influence Of Individual Differences, Styliani Malkogeorgou

Masters

Students’ decisions to pursue education and careers in Science, Technology, Engineering, and Mathematics (STEM) are shaped by an interplay of cognitive, social, and motivational factors. Spatial ability is among the most reliable predictors of STEM success, yet less is known about how it relates to students’ STEM attitudes and aspirations, and whether visuospatial working memory (VSWM) explains this relationship. This study tested the hypotheses that (a) stronger spatial abilities and VSWM would be associated with more positive STEM attitudes and stronger STEM aspirations, and (b) VSWM would mediate the relationship between spatial abilities and STEM attitudes/aspirations, while examining the influence …

Artificial Neural Network Model For Predicting Fatigue Endurance Limit Of Hot Mix Asphalt Using Uniaxial Tension–Compression Tests, Prashanta Kumar Acharjee, Mayzan Isied, Mena I. Souliman, Sameer Jung Karkl, Tanvir Ahmed, Gokhan Saygili

Civil Engineering Faculty Publications and Presentations

Fatigue is one of the major distresses occurring in asphalt concrete pavement. Repeated traffic loading causes escalated structural damage which results in the formation of cracks. There is a strain level below which the Hot Mix Asphalt goes under fatigue failure, and it is called endurance limit. In this study, a predictive model is developed to predict endurance limit strain values by using artificial neural network. Uniaxial tension-compression fatigue test results conducted under NCHRP Project 9–44 A were utilized in the model development process. An equation is also extracted from the model along which gives the exact values as the …

Rapid Flood Inundation Mapping For Dam Failure And Operations, Shivakumar Balachandran, Parvaneh Nikrou, Ayman Mokhtar Nemnem, Reza Saleh Alipour, Sagy Cohen, Xingong Li, Erfan Goharian, Jasim Imran

Faculty Publications

Dam failure often causes catastrophic flooding. Although conventional hydrodynamic models are available for generating flood inundation maps, there is a need for low-complexity models that can provide rapid inundation estimates during emergency situations. Operational releases of large volumes may also lead to downstream flooding. This study utilizes two DEM-based models, OWP HAND-FIM and FLDPLN, to produce flood inundation maps for near-real-time operational applications. Three dam-related scenarios, including failures and controlled operations, are examined using these simplified models for the Fall River Dam in Kansas. Breach flows are estimated using empirical relationships, and discharge attenuation is calculated using an analytical approach. …

A Runtime-Adaptive Transformer Neural Network Accelerator On Fpgas, Ehsan Kabir, Jason D. Bakos, David Andrews, Miaoqing Huang

Electrical Engineering and Computer Science Faculty Publications and Presentations

Transformer neural networks (TNN) excel in natural language processing (NLP), machine translation, and computer vision (CV) without relying on recurrent or convolutional layers. However, they have high computational and memory demands, particularly on resource constrained devices like FPGAs. Moreover, transformer models vary in processing time across applications, requiring custom models with specific parameters. Designing custom accelerators for each model is complex and time-intensive. Some custom accelerators exist with no runtime adaptability, and they often rely on sparse matrices to reduce latency. However, hardware designs become more challenging due to the need for application-specific sparsity patterns. This paper introduces ADAPTOR, a …

Integrated Computational And Experimental Investigation Of Groups V And Vi Metals In (M,Hf,Ti,Zr)B2-(M,Hf,Ti,Zr)C Ceramics, Ana C. Feltrin, Simon Divilov, Gregory E. Hilmas, Stefano Curtarolo, William G. Fahrenholtz

Materials Science and Engineering Faculty Research & Creative Works

Dual-phase compositionally complex ultra-high temperature ceramics were formulated by incorporating different Groups V and VI metals such as V, Nb, Ta, Cr, Mo, or W into a base composition containing the Group IV elements, Hf, Ti, and Zr. Metal distribution was predicted using first-principles-based thermodynamics simulations and compared with experimental results. Moreover, phase stability, microstructure, and mechanical properties were evaluated for all of the ceramics. Compositions containing Cr, V, Nb, or Ta formed dual-phase ceramics containing only one boride and one carbide phase, while compositions containing Mo or W developed an additional third phase. The experimental metal distribution trends generally …

Efficiency Evaluation Of Different Methods For Nitrogen Removal In Municipal Wastewater Treatment Plants: An Integrative Review, Cristiane G. Ferrarezzi, Juliana Canto Duarte

The School of Sustainability Engineering and Environmental Engineering (SEE) Graduate Student Publications

Domestic wastewaters present high nitrogen levels due to the urea and ammonia, which are excreted into urine. Municipal wastewater treatment plants (WWTP) normally face some challenges in keeping their treated wastewater at a low total nitrogen concentration, since the majority of their wastewater is domestic. Low nitrogen levels in the treated wastewater are important to avoid increasing eutrophication of the receptor body, which receives the treated wastewater. This work presents an integrative review considering studies related to denitrification in domestic WWTPs published from January 1st, 2018, to April 30th, 2023. This review aims to identify the most effective methods for …

Light Cone Cancellation For Variational Quantum Eigensolver In Solving Noisy Max-Cut, Xinwei Lee, Xinjian Yan, Ningyi Xie, Yoshiyuki Saito, Leo Kurosawa, Nobuyoshi Asai, Dongsheng Cai, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

Variational Quantum Eigensolver (VQE) is a quantum-classical hybrid algorithm used to estimate the ground energy of a given Hamiltonian. It consists of a parameterized quantum circuit, which the parameters are optimized using a classical optimizer. With the increasing need in solving large-scale problems in real-world applications, solving those large problems with fewer qubits and fewer gates becomes essential, so that we reduce the simulation difficulty and mitigate the effect of noise in real quantum hardware. In this study, we applied the Light Cone Cancellation (LCC) method to reduce the number of qubits and gates required in a two-local ansatz. LCC …

Performance And Mechanistic Insights Into Cement Systems Modified With Wastewater-Recovered Struvite, Ugochukwu Ewuzie, Rupack R. Halder, Abdulkareem O. Yusuf, Abiodun A. Saka, Godwin I. Ogbuehi, Titus C. Egbosiuba, Damilola A. Daramola, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Struvite, the stable hydration product and primary strength phase in magnesium ammonium phosphate cement (MAPC), derived from wastewater treatment, has recently been utilized as a sustainable additive to Portland cement (PC). However, its impacts on cement hydration kinetics, pore refinement, rheology, and the mechanisms underlying these processes have not been comprehensively studied. This study developed Portland cement-struvite (PCS) systems by replacing PC with 3–20 % struvite (ST wt.%: PCS3–PCS20) and evaluated these processes using isothermal calorimetry, 3D micro-computed tomography (μXCT), time-dependent rheometry, X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR), and the Krstulović-Dabić (K-D) model. The FTIR/XRD confirmed the coexistence …

Nanocatalytic Enhancement Of Local Heat Transfer In Continuous-Flow Thermal Reactors, Nasser Zouli, Nujud Maslamani, Ayman Yousef, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

An experimental investigation was conducted to evaluate the thermal conductivity (TC) and local heat-transfer coefficients (LHTCs) of nanofluids containing alumina (Al₂O₃), hematite (Fe₂O₃), and copper oxide (CuO) nanoparticles dispersed in deionized water. A newly developed non-invasive LHTC probe was integrated into the inner wall of the test section to enable direct quantification of interfacial heat-transfer performance. The measurements were conducted under laminar and turbulent flow conditons across Reynolds numbers ranging from 1000 to 10,000. The selected nanoparticles were chosen based on their high intrinsic thermal conductivity, cost effectiveness, and, in the case …

Figure Data For "Evaluating Platinum, Gold, Glassy Carbon, And Graphite Anodes For Chlorine Evolution In Molten Calcium Chloride Salt", Cameron Vann, Shelssie Klavceck, Carlos Mejia, Devin Rappleye

ScholarsArchive Data

This Data Set provides machine readable .csv files for the figures in:

Vann, C., Klvacek, S., Mejia, C., & Rappleye, D. (2025). Evaluating Platinum, Gold, Glassy Carbon, and Graphite Anodes for Chlorine Evolution in Molten Calcium Chloride Salt. ECS Advances, 4(4), 040501.

The file names of each .csv file correspond to the figure number in the article.

A Dynamic Inspection And Replacement Policy For Systems Subject To Degradation And Periodic Shocks, Jiawen Hu, Qiuzhuang Sun

Research Collection College of Integrative Studies

Inspection is widely adopted to improve the maintenance efficiency. Most works predetermine a periodic inspection scheme and focus on optimizing the replacement threshold. However, it is reasonable to inspect less frequently when the degradation level of the system is low and to perform inspections more frequently as the degradation level increases. This work investigates a dynamic inspection and replacement policy for systems subject to regular degradation and periodic shocks. The regular degradation of the system is modeled as a Wiener process. Meanwhile, a periodic arrived shock will incur a random amount increment to the degradation, which is assumed to satisfy …