Digital Commons Network^™

Solid Solution In The Series Sodium Tungsten Bronze, Lithium Tungsten Bronze And Tungstic Oxide, Godrej F. Doctor

Masters Theses

"The tungsten bronzes are a series of anionic substitutional solid solutions of alkali metal metatungstates and tungstic oxide. They are neither alloys nor intermetallic compounds, the term tungsten bronzes was adopted because of their remarkable metallic properties, e.g. luster, specific gravity and especially high electrical conductivity, which resembles to that of graphite. Due to its chemical inactivity and beautiful shades of color, it is used as a coating, especially in the plastic industry and for other ornamental products. The properties and the structure of these bronzes have not been investigated entirely satisfactory; within the last twenty years, only a few …

A Survey To Determine The Most Economic Design For Concrete Runways Of A Class 4 Airport, Yani Triandafilidis

Masters Theses

"This study is for the purpose of determining the most economical design for the runways of the Yesilkoy airport in Istanbul, Turkey. The discussion will include different design methods for the runways and the longitudinal and transverse joints that will be used in each case to provide crack control in the runway surfacing.

The city of Istanbul has a population of about one million. It is a growing city, being the industrial center of Turkey, and it also serves as a terminal for transcontinental airway systems. For these reasons it was decided to construct a class 4 airport for the …

Construction And Operation Of A Vacuum Retort Pilot-Plant For Distillation Of Alloys, Robert Frederick Doelling

Masters Theses

"The widespread appearance of large scale vacuum systems operating commercially in the micron range of pressures has initiated a new field of industrial endeavor, vacuum engineering. The ever increasing number of applications of vacuo in commercial processes and laboratory research has stimulated the design and improvement of vacuum equipment, and at the present time equipment may be obtained to meet practically any need. In turn, the variety of available tools has directed the engineers attention to improving old processes and developing new ones through the utilization of vacuum techniques ... The possibility of producing a relatively high purity silver in …

The Freezing Temperatures Of The System Aniline-Ortho Toluidine, Ray W. Fahien

Masters Theses

"The purpose of this investigation was to determine the freezing temperatures of the system aniline-ortho toluidine and to speculate on the theoretical significance of these results. The properties of this system are of considerable practical engineering interest since the system falls in a class of low-freezing organic mixtures which may have value as fuels for jet propulsion devices required to operate at extreme altitudes or in Arctic regions. Since nitric acid has been found to be a very effective and convenient oxidizer, the search for a suitable fuel to be used in combination led to aniline as having the most …

Grouting And Freezing Unconsolidated And Water-Bearing Strata, Robert Walter Heins

Masters Theses

"The process of grouting has undergone many changes in recent years. A definition must, therefore, be inclusive. "Grouting" is the process of injecting, under pressure, into soil and rock through boreholes or other openings, any solution or suspension containing materials that harden, stiffen, or swell in void spaces to produce a solid or semi-solid impermeable mass. Various cements, chemicals, asphalts and clays are the materials used in the grouting process. The use of tailings is also considered a type of grouting, since some hardening or stiffening takes place. Cement grout relies on chemical reaction to bring about setting or hardening …

Calibration Of Weirs By Means Of Critical Flow And Specific Energy, Robert A. Rapp

Masters Theses

"For many years man has been relying more each day upon metering devices to measure the flow of fluids in industry. The orifice, orifice meter, venturi meter, pitot tube, nozzle, flume and the weir have been employed, each having its own particular advantage.

In this parade of metering progress, the contracted weir has long been the forgotten brother of the suppressed weir. In almost every textbook on hydraulics or fluid mechanics, the following words appear, "end contractions are to be avoided where the weir cannot be calibrated". This skepticism and the length or absurdity of some contracted weir formulas led …

A Study Of The Thermal Conductivity Of Pumice, Joseph Mack Ralls

Mechanical Engineering ETDs

For the past several years, the use of pumice as a light weight aggregate building material has been increasing. At first, it was used only in the construction of building blocks. Recently, however, monolithic pumice concrete homes has been constructed in several New Mexico housing projects. One of the larger of these has been completed at Sandia Base in Albuquerque while still another is contemplated for Los Alamos, New Mexico.

The Design And Construction Of An Air Conditioning Unit For Instructional Use, George Joseph Hildebrandt

Mechanical Engineering ETDs

The purpose of this paper is to present an air conditioning unit which was designed and constructed for instructional purposes. The unit, which has two parallel cooling coils so that both the methods of vapor and cold water refrigeration can be demonstrated either individually or simultaneously, consists of filters, cooling coils, humidifier or spray chamber, reheat coil, and fan.

Pulse Ratings And Thermal Characteristics Of Power Transistors, Christopher Jako

Electrical and Computer Engineering ETDs

Power transistors are used in switching circuits of various types. Their operation in these circuits can be considered as an essentially on-off operation. Designers working with these circuits found that the ratio of the on-time to the off-time is a critical factor in determining the average power that the transistor can dissipate without exceeding its inherent temperature limits.

Waterfront Construction In New York Harbor, Carman William Garrison

Theses

The following chapters are devoted to the various phases of that branch of construction which is followed from the offshore side of the waterfront. This branch, in the parlance of the building trades, is known as dockbuilding. Years ago all waterfront structures in New York Harbor were constructed almost entirely of timber and experience taught that the most economical approach for building docks and wharves was made by utilizing floating piledrivers and derricks. Thus it happened that dockbuilders became skilled both in the use of wood framing tools and in handling marine equipment. Modern dockbuilders must have, in addition to …

Chromizing Of Steels, Edward Buchanan

Bachelors Theses and Reports, 1928 - 1970

In recent years, considerable thought and study have been given to the use of chromized articles in place of chromium stainless steel articles. The present extensive application of chromizing, indeed, helps greatly to conserve this valuable metal.

Magma 1949, Associated Students Of The Montana State School Of Mines.

Magma 1948-1997

No abstract provided.

Specifications And Specification Writing, Dwight Tenney

Kentucky's Annual Forum on Transportation

No abstract provided.

Welcoming Address [1949], H. L. Donovan

Kentucky's Annual Forum on Transportation

No abstract provided.

A Report On The Reduction Of Sphalerite Under Reduced Pressure, John H. Fuqua, William H. Magruder

Missouri School of Mines and Metallurgy Reports

During the last war, with the increased demand for magnesium metal and the general disregard for costs, a number of plants were constructed for the production of magnesium by vacuum metallurgical methods. (Both the Carbothermic Process and the Pidgeon Ferrosilicon Process employ vacuum systems for the production of metallic Mg.)

At the close of the war several of the government built plants were forced to suspend operations because of the economic impossibility of producing magnesium in competition with the Dow Chemical Company. It was with the availability of these plants in mind that experimentation with the possibilities of producing metallic …

Light Gage Steel Design Manual, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Study Of Oil Well Squeeze Cementing Operations, Arthur Wellesley Walker

Professional Degree Theses

"A study of the literature and field operations indicates conclusively that squeeze cementing operations are performed almost exclusively as corrective measures in completing or working-over wells. The most common use is to correct for faulty cement operations during original well completions. Careful study of field operations indicate that in most cases formations are broken-down at pressures far less than that required to lift the overburden, and that large quantities of drilling mud and cement may be pumped into the well (and formations) at pressures less than that of the overburden. Analyses of the forces indicate that the formations will be …

Recommended Procedure For The Computation Of Rights Of Way, Leon Hershkowitz

Professional Degree Theses

"This thesis sets forth a recommended procedure for the computation of areas included in "rights of way," using the principle of double meridian distances.

For a considerable number of years, it has been the opinion of the author that steps should be taken to arrive at some form of standardization in the procedures necessary in the computation of areas involving right of way and to more or less standardize legal descriptions pertaining thereto.

One need only examine the records of the various County Recorders in one particular state or in different states and he would be entirely convinced that such …

Research Investigation Of Seepage Control For Dams And Levees, Robert Raymond Brookshire

Professional Degree Theses

"The problems of a century old levee system have provided excellent research for the Corp of Engineers and others in the design and construction of earth dams for flood control, navigation and multi-purpose projects. A special problem on which valuable knowledge has been gained is that of seepage control. The experiences obtained in recent years have been supplemented by theoretical developments in the field of soil mechanics, but it is believed that considerable information will be gained on seepage control from further investigation and experience.

The safety factor to prevent failure from seepage is believed to be the most critical …

Caving Procedure At The Crestmore Limestone Mine Of The Riverside Cement Company, Riverside County, Calif., Randall Helt Wightman

Professional Degree Theses

"The following paper describes current mining practices of the Riverside Cement Company at its Crestmore Mine, Riverside, California. For a number of years the Riverside Cement Company obtained its raw materials by surface quarry operations, but after these deposits were exhausted for equipment available at that time, the Company started underground mining. Mine workings were begun in 1927 to 1930 for the recovery of limestone by block-caving methods"--Introduction, page 1.

Simplified Multicomponent Fractionation Calculations., Raymond Victor Bailey

LSU Historical Dissertations and Theses

No abstract provided.

Terpinol Hydrate And Terpineol From Sulfate Turpentine., Paul Arthur Mckim

LSU Historical Dissertations and Theses

No abstract provided.

A Study Of The Gelation Of Air-Setting Refractory Mortars, James Irving Mueller

Doctoral Dissertations

"Three basic mortar formulae were used in this investigation, each mix having some different materials present and each having its own gelling characteristics. The study was directed along the theory that the dry materials used play an important part in the hardening. Certain admixtures were tested and several were found to improve the workability after storage. The presence of additional sodium ions in the mortar was found to be helpful in overcoming the gelation but these tended to lower the refractoriness of the mortar.

A study was made of the base exchange capacities of the dry materials and the material …

Effect Of Titanium Dioxide As A Mineralizer In Silica Brick, Henry Clay Brassfield

Masters Theses

"The magnitude of the thermal expansion of silica brick and its inability to withstand rapid temperature changes gives rise to problems of considerable importance in the manufacture of silica brick. In firing the silica brick, mineralogical changes occur in the quartzite from which the brick is made, in which minerals of lower specific gravity are formed. This results in a permanent expansion of the brick. These mineralogical changes have been thoroughly studied and considerable information is known on the different forms of silica produced at the higher temperatures. If the conditions of firing are such that these changes have progressed …

Design And Construction Of An Electronic Gain-Phase Meter, Gabriel G. Skitek

Masters Theses

"There are many communication and electronic circuits, such as filters, phase-shifting networks, matching networks, voltage amplifiers with and without feedback, whose proper usage with associated equipment depends upon the knowledge of the variation with frequency of the voltage ratio and phase angle between the output and input sinusoidal voltages or currents...It is the purpose of this thesis to design and build an electronic instrument that will measure the voltage gain and phase angle between two sinusoidal voltages or current of communication circuits, in such a manner as to aid the student in visualizing how these quantities vary with frequency, and …

Analysis Of Cascade Of Four-Terminal Networks, Ernest Randolph Roehl

Masters Theses

"The object of this thesis is to find analytic expressions for the voltage and current variations along a structure composed of a cascade of identical dissymmetrical four-terminal networks driven harmonically at the sending end and working into an impedance at the receiving end and an impedance that can be placed at any of the junctions along the cascade. The method of analysis that is applied is analogous to that used in solving the long-line problem. A transmission system usually consists of the line or cable itself plus numerous other links whose purpose it is to correct defects in the line …

The Investigation Of Color Modification As A Result Of Solid Solution, Bobby Lee Mornin

Masters Theses

"To the ceramic industry, color has long been one of its chief problems, not only in reproducing colors in the many complex silicate structures but in the development of stains that are stable at high temperatures and that are economically feasible for mass production. At the present time a stable high temperature red or yellow would be very desirable. Solid solution has been employed in ceramics to modify and thereby provide ceramic materials of different physical characteristics. The limited data available with respect to such solid solution serves to indicate that perhaps this state may serve as an important means …

Aerodynamic Research For An Improved Rotor Control System On Helicopters, Delmar Wallace Breuer

Masters Theses

"Since the author has always been interested in Aeronautical Engineering, and in particular, rotary-winged-aircraft, the problem of research for aerodynamic improvement of rotary-wing control systems was chosen. This problem was suggested by the Army Aircorps Officials of Wright-Patterson Field of Dayton, Ohio as being a valuable and practical problem for the government. It is also valuable and practical for the author since it follows his general course of undergraduate study and since it fits closely into the field for which he is preparing himself...The requirement with which the author is most concerned is the design system for the producing of …

Analytical Investigation Of Thin And Moderately Thick-Walled Tubing Under Peripheral And Biaxial Loading, Frank Joseph Cizek

Masters Theses

"The problem then, resolves itself into a study of the behavior of thin-walled and moderately thick-walled cylinders under the effects of an external fluid pressure acting alone, or the effects of an external fluid pressure acting simultaneously with an axial loading. In this thesis a theoretical or analytical approach will be used. Some application and reference will be made to oil-well casings in particular, but the solutions will not be restricted to oil-well casing alone. it must be recognized that the tubing problem involves the problem of unstability before the proportional limit of the metal is exceeded and a similar …

An Investigation Of The Production Of Multicarbide Of Tungsten And Titanium From Wo₃ - Tih₂ - C Mixtures, Chi-Mei Hsiao

Masters Theses

"The purpose of this research was to investigate the possibility of producing the multicarbides of tungsten and titanium from a tungsten oxide-titanium hydride-carbon mixture. It appears to be worthwhile to carry out the reduction, carburization, and pre-alloying in one process, i.e. reducing tungsten oxide with the dissociated hydrogen from titanium hydride and the added carbon; then carburizing the reduced tungsten metal and dissociated titanium metal; at last, pre-alloying the mixture of TiC and WC. The replacement of titanium hydride with titanium oxide seems to be more direct, simple, and economical process; but the difficulty in the reduction of titanium oxide …