Digital Commons Network^™

Water Resources Development -- An Analysis Of Economic Justification Practices Of The Corps Of Engineers, Kerwood W. Barrand

Masters Theses

"Presented herein is a brief analysis of the economic justification practices of the Corps of Engineers as commonly implemented in proposals concerning water resources projects. Where applicable, recommended methods are compared to similar methods advocated for, and accepted by, private engineering firms in similar situations.

The major problem exists in the lack of a profit motive in programs undertaken with the use of public funds. However, a profit can be said to have been realized in public works programs if the total benefits of the programs to all the people exceed the costs of these programs and, further, if the …

Stress Distribution In Splined Shafts In Torsion By The Membrane Analogy, Charles L. Edwards

Masters Theses

"The purpose of this investigation is to determine torsional shearing stress distribution in various shapes of shafts. The project will include shafts with circular boundaries. No attempt will be made to show the relation between stress and applied torque"--Preface, page iii.

Some Physical, Chemical, And Thermohydrodynamic Parameters Of Explosive Ammonium Nitrate-Fuel Oil Mixtures, Joseph J. Yancik

Doctoral Dissertations

"The explosive properties of ammonium nitrate-fuel blasting agents were investigated by measuring their detonation velocity and sensitivity. Detonation velocity was measured by a pin oscillograph method with a modified pin technique. Five types of tests were used to evaluate the explosive sensitivity of AN-fuel mixtures under varied environmental conditions. These tests measured the confined and unconfined critical diameter, minimum primer for a three inch diameter iron pipe confined charge, for an unconfined charge at the critical diameter, and minimum primacord primer under special conditions.

Properties of ammonium nitrate-fuel blasting agents were evaluated by considering the effects which each component of …

Some Dynamic Creep Characteristics Of Gypsum, Ikram-Ul-Haq Dar

Masters Theses

"A review of literature concerned with time-dependent deformation of geologic and non-geologic materials is presented. A static loading machine and a four unit dynamic loading unit was designed and assembled to evaluate static and dynamic creep properties of gypsum. The tests were run for various levels of static loads, and superimposed dynamic loads. Investigations were carried out to determine the relationships, if any, between impact energy, impact velocity and momentum, and dynamic strains. Viscoelastic coefficients were determined for the investigations. The conclusion was presented that time-dependent strain in the dynamic creep tests of the particular gypsum rock tested is a …

Investigation Of Economic Design Procedure For A Rigid Frame, Richard S. Groner

Masters Theses

"This work presents an analysis of various arrangements of component parts of a rigid frame. From this analysis a procedure is indicated for a logical choice of member sizes for a first trial selection of a frame for given loading conditions. The first trial solution yields a frame which is in the range of an economical design"--Abstract, page 2.

A Theoretical And Experimental Analysis Of A Hall Generator, David L. Endsley

Electrical and Computer Engineering ETDs

This is a study of the behavior of a "Hall Effect" device by theoretical and experimental methods to determine if its operation may be predicated for various magnetic fields, output resistances, operating temperatures, input resistances, input control currents, and device construction.

This information should prove useful in the design of a circuit where the use of a "Hall Effect" device is contemplated.

An Experimental Method For Three-Dimensional Dynamic Stress Analysis, Larry E. Williams

Mechanical Engineering ETDs

It is the purpose of this thesis to present an evaluation of a method of experimental dynamic stress analysis utilizing electrical resistance strain gauges located internally. If it can be shown that the proposed experimental procedure is valid, then the transient stress phenomena could be continuously recorded from an internal, integral strain gauge placed at any desired location and in any orientation in a suitable model.

A Reactor Transfer Function Analyzer, Earl O. Swickard Jr

Electrical and Computer Engineering ETDs

This thesis describes the design of a device for determining the transfer function of a nuclear reactor. A number of different methods have been successfully employed for this purpose but were, in some cases, tedious or required the use of delicately balanced components. The equipment described computes values which are simply related to the values of the transfer function and is operable over a frequency range of about 1000:1. The time required to obtain data for one frequency point is two minutes or less. No precise adjustment is necessary during operation.

A Study Of The Application Of Digital Computers For Controlling Vehicle Traffic At A Signalized Intersection, John V. Wait

Civil Engineering ETDs

This study outlines a method whereby a small, specialized "on-line" digital computer could be used to control urban vehicle traffic at a signalized intersection. In the basic system proposed, the computer uses as input data a "history" of the instantaneous vehicle flow, in terms of number of cars arriving and arrival time. The data are stored for a period of 240 seconds in a magnetic drum memory. Once each 1/2 second, the computer examines the arrival pattern of cars and compares the delay being imposed on the waiting cars versus the delay which would be imposed on the cars on …

Transient Response Of A Mass Mounted On A Nonlinear, Strain-Rate Sensitive Element, Wiley T. Holmes

Electrical and Computer Engineering ETDs

The object of the present transient movement study was not that of investigation of response of a nonlinear system alone, but was projected to include the effect of a strain-rate sensitive, nonlinear restoring element.

Shear Strength Of Simply Supported Prestressed Concrete Beams Having Web Enforcement, Randolph E. Holt

Civil Engineering ETDs

The problem of shear strength in pre-stressed concrete beams is analogous to that in ordinary reinforced concrete, since there is very little difference between reinforced concrete and pre-stressed concrete beams in the cracked condition. Until very recently, the knowledge of the shear strength of reinforced concrete members and pre-stressed concrete members was wholly statistical. Developments in the last few years have advanced it to the semi-empirical level, ^5,6,7 but our knowledge of the effect that shear has on the ultimate strength of reinforced and pre-stressed concrete members is still far from complete.

The Effect Of Capillary Bleeding On The Compressive Strength Of Concrete, James L. Cramer

Civil Engineering ETDs

The purpose of this study was to determine the effect that bleeding has upon the compressive strength of concrete. Keeping in mind that the compressive strength of a concrete depends highly upon the water, cement ratio, it was reasonable to expect that the changing of the water content of the fresh concrete by bleeding would have a definite effect on the final compressive strength. While tests upon tests and studies upon studies have been made of cement and concrete, few, if any, have been concerned with this problem.

Effect Of Strain Rate And Temperature On The Stress-Strain Characteristics Of Plastics, Walter W. Joseph

Mechanical Engineering ETDs

The stress-strain characteristics of a material are a measure of the energy absorption characteristics of that material. Generally, plastics show permanent deformation at low values of strain but will withstand a large amount of strain before reaching their ultimate strength. Therefore, in effect, plastics are good energy absorbing materials. If the packaging designer could predict the effect of variation in strain rate and temperature on the stress-strain characteristics of a given plastic, his designs would be more reliable.

Transistor Distributed Amplifier, Bill J. Harper

Electrical and Computer Engineering ETDs

For the purpose of this report, it is assumed that the behavior of the transistor can be predicted from the study of a suitable circuit model or equivalent circuit of the transistor. It is further assumed that, except for the intrinsic short-circuit current gain, the circuit parameters of he transistor are independent of frequency and temperature. The primary interest in the study of transistor distributed amplifier here is the amplitude of the voltage gain in the amplification of video frequencies. Somewhat less detailed studies are made of the distributed amplifier in band-pass applications.

Magma 1959, Associated Students Of The Montana State School Of Mines.

Magma 1948-1997

Any year book has as its prime purpose the depiction of a school year in a manner that will recall the maximum of memories in future years. The Magma this year utilizes memories as a theme, but places a slight accent on those of the graduating seniors.

Space Books, Rocket City Astronomical Association, Space Enterprises, Inc.

Space Journal

No abstract provided.

Space Journal Statement Of Policy/Mechta And Operation Score, Rocket City Astronomical Association, Space Enterprises, Inc.

Space Journal

No abstract provided.

Space Journal, Vol. 1, No. 5, March-May 1959, Rocket City Astronomical Association, Space Enterprises, Inc.

Space Journal

No abstract provided.

Summary Of Findings Of First International Skid Prevention Conference, Jack H. Dillard

Kentucky's Annual Forum on Transportation

No abstract provided.

An Amplitude-Stable, Fixed-Frequency Transistorized Power Supply, Bobby O. Allen

Electrical and Computer Engineering ETDs

The subject of this paper is the design of an ultrastable, fixed- frequency power supply capable of maintaining a high degree of amplitude stability over a wide range of resistive load values. The requirement for such a power supply originally arose in connection with the design of a particular piece of test equipment required by Sandia Corporation. No attempt will be made in this paper to justify or explain the necessity for the specified design criteria outlined in the following paragraphs other than to adequately define the design criteria.

An Investigation Of Some Characteristics Of Explosive Ammonium Nitrate-Reducing Fuel Mixtures, Klaus M. Kohler

Masters Theses

"It was the purpose of the investigation described herein to find the answers to some of the questions which arise with the use of an ammonium nitrate--non nitroglycerine--mixture as an explosive, such as

a) the effect of the percentage of fuel oil in the mixture

b) the effect of the loading density of the mixture

c) the effect of the diameter of the charge

d) the effect of the particle size of the ammonium nitrate

e) the effect of different reducing fuels

f) the effect of different primers"--Introduction, pages 5-6.

Graphical Solution Of Concentration At Production Wells Of Injected Radioactive Water Tracers, George E. Vaughn Jr.

Masters Theses

"With the advent of field research in which radioactive isotopes are used as tracers for water injected in secondary-recovery operations, knowledge of the probable transit time between wells of an injected tracer, its concentration at detection points, and the resultant optimum injection concentration has become important. Both detection and, consequently, injection concentrations of radioactive tracers are at least in part functions of the loss of tracer for various reasons, flow characteristics between wells, the rate of decay of radioactive emission, and the sensitivity of the detection apparatus. A method, based on the characteristics of a homogeneous 5-spot system, has been …

Stability Of Rectangular Plates By Arbitrary Deflection Method, James Arthur Jones

Masters Theses

"Many engineering structures use thin rectangular plates as members. These plates may be loaded and supported in numerous ways. The edges may be freely supported, rigidly supported, or supported by elastic members. The load may be applied normal to the plane of the plate, in which case the problem becomes essentially one of bending. If the load is applied in the plane of the plate, placing it in compression, the problem becomes one of stability.

This investigation is concerned with the stability of plates rigidly supported on all edges and having a compressive load applied to two opposite edges of …

Regulation Of River Bank Development Through Flood Plain Zoning, William James O'Neill

Masters Theses

"The triangular pattern of protection, evacuation and flood plain zoning, as the only truly effective and comprehensive approach to proper flood control, is substantiated in practically all technical publications on this subject by economic and engineering leaders. Yet in actual practice, at the present time, flood plain zoning is not being actively applied by any federal flood control agency and by only one of the forty-nine states faced with this common problem. This lack of direct application was probably best described recently by Walter B. Langbein, Water Resources Division Engineer, U. S. Geological Survey when he said, "Flood Plain Zoning, …

Application Of Statistical Methods To Evaluation Of Mineral Deposits, Francis R. Saupé

Masters Theses

"Only in recent years have statistical methods been applied to evaluation of ore reserves. An attempt is made in this study to prepare an outline to be followed throughout the exploration in order that statistical methods can be applied to valuation problems. Particular emphasis is given to the preliminary requirements to a statistical approach. Representative parameters, sampling pattern, and sample size are discussed in separate chapters"--Abstract, page iii.

The Effect Of Heating Chill Cast Eutectics, Robert Lewis Dreshfield

Masters Theses

"This investigation is the result of the author's specific interest in two phase systems. In the past, considerable work has been done investigating the alteration of eutectoid structures; however, eutectic structures have been neglected to a great extent. Tammann did some work on the subject in 1937 as did Brown and Guy in more recent times. In both of the above cases the eutectic structure was altered by cold working and subsequent heating of the alloy.

Tammann also noted that eutectics chill cast in liquid air display a vastly different structure than those cast under equilibrium conditions and that there …

Lattice Constants, Thermal Expansion Coefficients And Perfection Of The Phase Tio, Hsiung Wei Li

Masters Theses

"TiO is one of the intermediate phases in the titanium - oxygen system with a crystal structure of the sodium chloride type. The phase extends from about 22 to 29 weight or about 46 to 55 atomic percent oxygen. A comprehensive survey of the physical properties of the phase has been made in previous investigations (see review of literature), but only impure titanium was available at that time. Therefore, some revision of the measurements had to be made. Also, neither the thermal expansion coefficients nor the temperature at which the lattice constants were measured were reported.

For precision determination of …

A Preliminary Investigation Of Natural Gas Combustion As Applied To Thermal Recovery Of Petroleum, Roger J. Schoeppel

Masters Theses

"Present application of the subsurface combustion processes in the thermal recovery of petroleum afford favorable and opportune methods of providing greater recoveries from petroleum reservoirs. This study attempts to elucidate some of the parameters controlling the complex hydrocarbon oxidation for one such process. The experimental phase consisted of investigating the combustion behavior of eight nonexplosive and one explosive natural gas-air mixtures at low and intermediate pressures. The hydrocarbon was allowed to oxidize by self-ignition under controlled conditions within environments precluding a visible flame type reaction. Progress of the reaction was followed by measuring effluent oxygen content.

Experimental evidence indicate the …

Design And Construction Of An Automatic Antenna Pattern Plotter And Design Of A Microwave Absorbent Material, Norval D. Wallace

Masters Theses

"The following study consisted of two problems. One was the design and construction of an automatic antenna pattern plotter, and the other was the design of a microwave absorbing material for use in a darkroom"--Introduction, page 1.

Steady State Temperature Distribution In A Rotating Disk, George Henry Morgan

Masters Theses

"The purpose of this investigation was to obtain an expression for the steady state temperature distribution of a disk of uniform thickness rotating at a constant speed in ambient air while absorbing heat through the periphery at a constant rate. Engineers encounter such problems in connection with brakes of several varieties. The general solution obtained here could be extended to similar physical problems such as grinding wheels, disk clutches, and so on.

A differential equation was obtained for the temperature in the disk by the application of Fourier's conduction law and Newton’s convection law. A solution of this equation was …