Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 51361 - 51390 of 53023

Full-Text Articles in Entire DC Network

Some Effects Of Impact Of Low Magnitude On The Deformation Of Prestressed Gypsum Cylinders., Arthur Joe Bush Jan 1963

Some Effects Of Impact Of Low Magnitude On The Deformation Of Prestressed Gypsum Cylinders., Arthur Joe Bush

Masters Theses

"A review of the literature pertaining to the subject is presented. Many series or impacts were made on specimens of gypsum which were already under a static load. A special. repetitive impact machine was used to allow a variety or weights to fall from predetermined heights. Tests were conducted inside a roan constructed especially for these tests. Heat gained or lost through the ceiling and walls was kept at a minilI1um by a lining or aluminum-covered, fiber glass insulation. Temperature and humidity conditions were kept nearly constant by a combination air-conditioner and dehumidifier.

Repetitive loading of the prestressed specimen was …


A Study Of Chemical Stabilization Of The Swell Properties Of Putman Soil, Dale E. Dobson Jan 1963

A Study Of Chemical Stabilization Of The Swell Properties Of Putman Soil, Dale E. Dobson

Masters Theses

"The theory of chemical stabilization of a swelling clay was reviewed. The effect of several chemicals on the engineering properties of Putnam soil was investigated using the Atterberg tests. Strength of concentration of chemical additives versus preferred structural orientation of treated Putnam was investigated using sedimentation procedures similar to those used in the hydrometer analysis of fine grained soil sizes. Swell tests were conducted under a static load of 1.25 psi on untreated Putnam, Putnam in combination with sodium carbonate, and Putnam treated with calcium hydroxide. These tests were conducted at varying initial moisture contents and dry densities.

It was …


Effects Of Gamma Radiation On Ion Exchange Membranes., John R. C. Roop Jan 1963

Effects Of Gamma Radiation On Ion Exchange Membranes., John R. C. Roop

Masters Theses

No abstract provided.


Application Of Photoelasticity To The Stability Of Slopes In Open-Pit Mines., Aly Hemedah Gomah Jan 1963

Application Of Photoelasticity To The Stability Of Slopes In Open-Pit Mines., Aly Hemedah Gomah

Masters Theses

"A study of the stability of wall slopes in open pit mines was performed by preparing photoelastic epoxy-resin models representing open pit mines with various slope angles. The models were loaded centrifugally, using the 'locked-in' stress technique. Due to the relatively large sizes of the models, stress distributions could not be recorded with the photographic equipment available. Therefore, fringes and isoclinics were plotted directly on the models themselves. The fringes were used to calculate the shear stress concentrations at arbitrary points in the model from known stresses at control points in the models. The type of slope failure that was …


Digital Computer Design Of Compensation For Linear Control Systems, Larry C. Amsler Jan 1963

Digital Computer Design Of Compensation For Linear Control Systems, Larry C. Amsler

Masters Theses

"If a control system is to be synthesized, it is inferred that a plant or process is present which must be controlled, and the problem of how to design the control system then arises. The first step is to decide on performance specifications to which the complete system must conform. These specifications may involve such things as the system steady state response, transient response, or frequency response. Any of several synthesis methods may then be applied to complete the system design.

In this study a synthesis method is developed for single-loop linear feedback systems. First, the number of compensating poles …


An Electrolytic Polishing And Recrystallization Study Of Zinc And Zinc Alloys., Roy Ashley Smith Jan 1963

An Electrolytic Polishing And Recrystallization Study Of Zinc And Zinc Alloys., Roy Ashley Smith

Masters Theses

"A Unitron hot stage and polarized light were used to enable direct observation of recrystallization in high purity (99.99 per cent) zinc and high zinc content alloys. Electrolytic polishing was investigated in an attempt to prepare unetched surfaces which would show good structural contrast under polarized light and thus permit structural changes occurring during recrystallization to be observed.

Kinetic data obtained from a sequence of photographs during each recrystallization trial showed typical sigmoidal isothermal reaction curves characteristic of a nucleation and growth process. It was determined that rates of nucleation and grain growth are a maximum over the same time …


Permeability Of Organic Protective Coatings And Relation To Film Thickness, Bipin N. Doshi Jan 1963

Permeability Of Organic Protective Coatings And Relation To Film Thickness, Bipin N. Doshi

Masters Theses

“Special types of coating systems are used to protect industrial products and structures against corrosion. Many millions of dollars are spent each year for these coatings. The ability of protective coatings to reduce or inhibit corrosion depends on a variety of factors such as dry film thickness, resistance to permeation of ions and vapors, temperature, pressure, structure of binder, nature of pigment, electrolytic resistance, and many others.

The initial work done by Larry Inglis on the permeability of coatings and it's relation to thickness of coating films showed that the permeability, as determined by under film corrosion, was independent of …


A Study Of The Haeffner Effect In Mercury, James Nicholson Baysden Jan 1963

A Study Of The Haeffner Effect In Mercury, James Nicholson Baysden

Masters Theses

"In 1953, E, Haeffner reported that when he passed a direct electric current through a capillary tube filled with mercury, he obtained a separation in the isotopes of mercury with the heavier isotopes being enriched at the negative terminal and the lighter isotopes at the positive terminal. This effect has since been referred to as the Haeffner Effect, Since the original experiment with mercury, other investigators have observed this effect in many other liquid metal systems.

This investigation of the Haeffner Effect in mercury involves the use of a radioactive isotope of mercury (Hg 203) as a tracer to follow …


Determining Design Freedom Of Linear Feedback Control Systems, Harley D. Brixey Jan 1963

Determining Design Freedom Of Linear Feedback Control Systems, Harley D. Brixey

Masters Theses

“The problem confronted in this thesis is to develop a method or procedure to be used in determining the amount of design freedom that is available in any given linear feedback control system by working with the signal flow-graph representation of the system.

Literature was reviewed that deals with basic signal flow-graph theory and degrees of design freedom. Signal- flow-graph theory that forms a foundation for the development is presented.

The development consists of starting with an essential signal-flow graph of order one. The sensitivity and transmittance functions are written for this essential graph in terms of graph symbols; then …


A Study Of The Dissolution Of Titanium-Oxygen-Nitrogen Alloys In Hydrofluoric Acid, Arliss V. Martin Jan 1963

A Study Of The Dissolution Of Titanium-Oxygen-Nitrogen Alloys In Hydrofluoric Acid, Arliss V. Martin

Doctoral Dissertations

"The purpose of this investigation was to study the effect of oxygen and nitrogen (in the alpha solid solution range) on the kinetics and electrochemistry of titanium dissolution in hydrofluoric acid. Dissolution rates, activation energies, difference effects, and potential measurements were determined with TiOXNY sintered alloys and sheet metal. Values of x ranged from 0.01 to 0.126 and values of x. from 0.001 to 0.230.

Dissolution rates were determined using a gas evolution technique. Temperatures were varied from 5 to 45°C. The hydrogen evolution rates were converted to TiOXNY dissolution rates by means of …


The Design, Construction, And Calibration Of An Apparatus To Determine The Thermal Conductivity Of Solids, Alan Edward Stephenson Jan 1963

The Design, Construction, And Calibration Of An Apparatus To Determine The Thermal Conductivity Of Solids, Alan Edward Stephenson

Masters Theses

"Many pieces of equipment have been designed to determine the thermal conductivity of solids. They all, however, depend on the application of Fourier's equation of heat conduction in solids to determine the thermal conductivity. The apparatus used in this investigation is a modification of the guarded hot plate method used by the American Society for Testing Materials. Operation of the device is given in a step by step procedure both as a guide for others and also to show how it was operated during calibration of the apparatus. Data obtained in the calibration is given in tabular and graphical form …


Preliminary Investigation Of Acid Treatment For The Stabilization Of Doloma, Deward Pan Jan 1963

Preliminary Investigation Of Acid Treatment For The Stabilization Of Doloma, Deward Pan

Masters Theses

"The work presented in this thesis is the result of an investigation to develop an economical and successful means for producing a stable, hydration resistant compound on the surface of doloma particles by an acid treatment, which does not significantly alter the refractoriness of the material. Granite, a commercial doloma, from Valley Dolomite Corporation, was treated with different concentrations of inorganic acid-water solutions and organic acid-alcohol solutions for varying time at atmospheric pressure and temperature. The treated doloma was examined by (l) X-ray diffraction and (2) the hydration test.

It was found that the organic acid acted as a coating …


The Applicability Of Longwall Mining To American Coal Seams, Mehmet Turgut Tezcanli Jan 1963

The Applicability Of Longwall Mining To American Coal Seams, Mehmet Turgut Tezcanli

Masters Theses

"The objective of this thesis is to show that mechanized longwall mining can be applied to thinner American coal seams with greater advantage than the conventional mechanized room-and-pillar methods now being used, provided that the proper equipment is employed in an effective manner."--Objective, page 1.


A Study Of Rotational Critical Speed For A Multi-Mass System, Richard K. Brockmann Jan 1963

A Study Of Rotational Critical Speed For A Multi-Mass System, Richard K. Brockmann

Masters Theses

"The object of this thesis is to demonstrate, by use of an IBM-1620 digital computer, a fast efficient method for locating natural frequencies of multi-mass rotational systems. Stress and deflection characteristics are examined at these frequencies also.

The shafts considered in this thesis are simply supported and symmetrically loaded with five concentrated masses. These five masses are placed at increments of 10 inches on a 60 inch shaft. The variable to be examined is shaft diameter, which is varied from 0.2 inch to 1 inch by increments of 0.2 inch. The effect of shaft weight, which is a function of …


Permeability And Adsorbed Flow Of Carbon Dioxide And Propene Through Porous Silica., Jorgen Lovland Jan 1963

Permeability And Adsorbed Flow Of Carbon Dioxide And Propene Through Porous Silica., Jorgen Lovland

Masters Theses

"It has been known for over a century that gases diffuse through some porous barriers at a rate inversely proportional to the square root of the molecular weight. The difference in diffusion rate can obviously be used to separate gases with different molecular weight. Since other methods for separation like distillation and adsorption usually are simpler and cheaper, separation by gaseous diffusion has found few practical applications. One notable exception is the separation of the gaseous hexafluorides of u238 and u235.

Later investigations on the permeation of gases through porous materials have shown that when gases diffuse …


A Model Investigation Of The Water Coning Phenomenon., Gary L. Downey Jan 1963

A Model Investigation Of The Water Coning Phenomenon., Gary L. Downey

Masters Theses

"Results and procedures are presented covering the design and construction of a dimensionally scaled model of an oil reservoir and its use in investigating the problem of water coning. The theoretical considerations involved in the analytical solution of the water coning problem and the methods used in constructing, designing, and operating the above model are presented.

Four water coning experiments have been completed using the model. Three of the four runs have produced significant results. The information obtained from these experimental results have shown that the laboratory model is well suited for investigating oil reservoir problems such as water coning …


A Study Of The Angular Velocity In A Liquid Induced By A Vortex In An Emptying Container, James Paul Hartman Jan 1963

A Study Of The Angular Velocity In A Liquid Induced By A Vortex In An Emptying Container, James Paul Hartman

Masters Theses

"Previously a limited amount of investigation has been done to describe the rotational motion of fluid in a draining tank. To date tank design has been based on trial and error, since the physical mechanisms of actual draining have not been recognized. This investigation has been made to develop a technique for the measurement of the motion of the fluid during the draining process and to present the results of the observed surface velocity of the liquid as a function of depth of fluid and its distance from the center of the vortex core. Many previous investigators of vortex behavior …


Parameters In Ablation Heat Sheilds, Franklin Chang Liang Lin Jan 1963

Parameters In Ablation Heat Sheilds, Franklin Chang Liang Lin

Masters Theses

"The desired result of this paper is a method of determining temperature distribution and burn off rate in a semi-infinite rod or shield subjected to a large heat flux. The possible methods of determination were investigated, and it was felt that an analytical approach turned out to be the most feasible.

The analytical analysis employed involves the use of the Fourier's general equation for one dimensional heat flow. Transformations from stationary to moving coordinates reduces the problem from unsteady state to steady state boundary conditions. The resulting equations can be applicable to the extent for the heat flow problems involving …


Non-Ferrous Metal Mining And Smelting In Australia, H. R. Hanley Jan 1963

Non-Ferrous Metal Mining And Smelting In Australia, H. R. Hanley

Missouri School of Mines and Metallurgy Bulletins

No abstract provided.


The Monopole Antenna With A Small Number Of Radials, S. H. Durrani Oct 1962

The Monopole Antenna With A Small Number Of Radials, S. H. Durrani

Electrical and Computer Engineering ETDs

This paper reports a study of an antenna system consisting of a vertical monopole and a small number of insulated horizontal radials lying lightly on the ground.

The monopole antenna has long been popular for medium frequency broadcasting because of its inherent simplicity and economy. Although quarter-wavelength resonant structures were used in the early days, it was shown by Ballantine (1924) that for a given power, the strongest field strength at the radio horizon was produced by an antenna about 0.6 wavelength long. This ignored the sky wave and was based on the assumption of a perfectly conducting (and reflecting) …


A Parametric Study Of The Heat Transfer Characteristics Of A Moving Band Heat Exchanger, Larry Hyde Brim Sep 1962

A Parametric Study Of The Heat Transfer Characteristics Of A Moving Band Heat Exchanger, Larry Hyde Brim

Theses and Dissertations

In recent years much attention has been devoted to the development of efficient heat exchangers. The regenerative or moving matrix heat exchanger is one type which has been considered. Most regenerative heat exchangers use one of the conventional types of high area matrices mounted in a drum or disk in such a manner that it can be moved in a continuous cycle from a cold fluid stream to a hot fluid stream and back again. A rather different approach to the design of a regenerative heat exchanger which has been patented in this country is a set of flexible moving …


Hypersonic Plasma Thermionic Generator, Andre R. Leblanc Sep 1962

Hypersonic Plasma Thermionic Generator, Andre R. Leblanc

Electrical and Computer Engineering ETDs

The Langmuir two-probe system is extended to cover the case of electron emission from one of the probes. The contact potential difference between the two probes is also included as part of the equations. One of the probes, known as the emitter, operates at sufficiently high temperatures such that electron emission occurs, while the other probe, known as the collector, operates at low enough temperatures such that its electron emission can be neglected.


Linear Side-Loaded Transmission-Line Antennas, Robert W. Kulterman Aug 1962

Linear Side-Loaded Transmission-Line Antennas, Robert W. Kulterman

Electrical and Computer Engineering ETDs

A need has arisen in recent years for a mobile transmitting antenna capable of radiating large amounts of power as efficiently as possible in the frequency range from 10 to 40 kc. Several mechanical and electrical problems are encountered in building and operating such an antenna.


Stress Analysis Of An Infinite Cylinder With An Irregular Shaped Cavity Using Complex Variable Techniques, Gerald H. Lindsey Aug 1962

Stress Analysis Of An Infinite Cylinder With An Irregular Shaped Cavity Using Complex Variable Techniques, Gerald H. Lindsey

Theses and Dissertations

The advancement of modern technology has brought with It a demand upon the engineer for more thorough analysis techniques. This has been precipitated by the advent of missiles and space-craft that do not permit regular inspections to determine causes of failure, crack propagation, design weaknesses, etc. Thus, a more complete analytical work must be performed to facilitate a foreknowledge of reaction and performance of a particular design to its environment.


An Electronics Course Of Study For The High Schools In The Highline School District, Rual Elmer Tigner Aug 1962

An Electronics Course Of Study For The High Schools In The Highline School District, Rual Elmer Tigner

Graduate Student Research Papers

Electronics is now being taught in the Highline District in one course for one year in each of the four high schools. There are no formal district objectives tor this course, no sequence of instruction, no list of course content. The writer has felt the need for the above and has interviewed all four instructors in the district and the assistant superintendent of instruction. It was agreed that in order to provide a more meaningful, correlated program, it would be necessary to have such a district-wide course of study developed. In view of this, the writer has attempted to develop …


Cutting School Building Costs Through Educational And Architectural Planning, Construction Details, And Contracting, Alan Dale White Aug 1962

Cutting School Building Costs Through Educational And Architectural Planning, Construction Details, And Contracting, Alan Dale White

Graduate Student Research Papers

It was the purpose of this paper to point out the factors pertaining to educational and architectural planning, construction details, and contracting which collectively tend to lower the building expenditures. Specific architectural details such as wall cost comparisons, structural framing, and material recommendations have been purposely deleted. The suggestions presented herein, general in nature, do not seriously restrict architectural imagination, ingenuity, or creativity.


A Literature Review Covering The Effect Of Residual Stresses On Fatigue Strength Of Steel, Clarence A. Calder Aug 1962

A Literature Review Covering The Effect Of Residual Stresses On Fatigue Strength Of Steel, Clarence A. Calder

Theses and Dissertations

Fatigue fracture usually is defined as the failure of a part at a stress below its breaking stress due to repetitive loading conditions. It is now a well known fact that a part, designed for a maximum stress well below the yield point of the material, may be very apt to fail under cyclic loading conditions over a period of time. The metal appears to "wear out" after a time just like humans do and fatigue failure occurs. Metal fatigue may be contrasted to animal fatigue in that l) its detection before the latter stages is normally difficult if not …


The Irish Plumber And Heating Contractor, August 1962 (Complete Issue) Aug 1962

The Irish Plumber And Heating Contractor, August 1962 (Complete Issue)

Building Services Engineering

No abstract provided.


Unm Snail Programming Manual, Paul Edward Presson Jul 1962

Unm Snail Programming Manual, Paul Edward Presson

Electrical and Computer Engineering ETDs

The purpose of this thesis is to provide an introduction at the high school level to the principles of programming digital computers and to serve as a programming manual for the UNM SNAIL. The thesis is self-contained; that is, it may be read without reference material to provide a general background knowledge of computer programming.


Electromagnetic Radiation In Magneto-Ionic Media For Vlf And Vhf Spectra, Kenneth R. Cook Jul 1962

Electromagnetic Radiation In Magneto-Ionic Media For Vlf And Vhf Spectra, Kenneth R. Cook

Electrical and Computer Engineering ETDs

The interaction of electromagnetic fields and magneto-ionic media has received considerable attention in the last few years. In rather general terms, the investigation of these phenomena can be categorized into two basic classes. In one class of investigation the primary interest is the dynamic nature of the plasma when subjected to specialized forms of electromagnetic fields. This branch of science has various nomenclatures such as hydromagnetics, magnetohydrodynamics, plasma physics and numerous others implying the use of high density ionized gases interacting with electromagnetic fields. Controlled fusion processes for transforming energy states is an example of this branch of electromagnetics and …