Digital Commons Network^™

Non-Ferrous Metal Mining And Smelting In Australia

School of Mines and Metallurgy Bulletins

Bulletin was published without an Abstract

Heat Flux Measurement By Miniature Calorimeters, Gary Rex Coffin

Theses and Dissertations

During recent years an increasing number of technical firms and manufacturers have begun to specify heat flux, energy input per unit area per unit time, as a testing and designing criteria. This change in the boundary condition (to heat flux from temperature excess or others) evolved from the idea that each material has a characteristic burning temperature. Therefore, the rate of ablation or burning depends mainly upon the rate of energy input into the specimen, and not its temperature. Thus, the need for a flux measuring device became more acute.

Radiant Flux Distribution From Concave Radiation Sources, Richard K. Duke

Theses and Dissertations

In order to analyse the radiant heat transfer characteristics of a concave source, two vital concepts must be clearly understood. The first is called the apparent emissivity Ea and is a function of both the local total emissivity E and of the geometry of the source. Although the total emissivities of ordinary substances range between zero and one, the two extremeties never occur. Surface emissivities which approach these values in the limit, must be created mechanically from materials in the range 0

The Aerodynamic Drag On Spheres Under Acceleration, Charles Earl Nielson

Theses and Dissertations

The requirement of a greater understanding of the behavior of solids-gas systems has shown itself profoundly with the advancement of science and technology during recent years. The range and variety of processes in which these systems play an important role is exceptionally broad. These processes range from meteorological disturbances such as dust storms, rain and snow, to the use of vacuum cleaning equipment. With the advancement of aircraft and space technology the influence of these systems is again felt in such cases as the motion of rockets, missiles and aircraft in flight, the behavior of liquid droplets or metallic particles …

The Verification And Use Of A Hot-Wire Anemometer In Turbulence Measurements, Charles Young Warner

Theses and Dissertations

One very important part of research is the development of effective, reliable instruments. The measurement of turbulence in flow fields is a complex research problem. It depends heavily upon the hot-wire anemometer. This thesis describes the evaluation and use of a constant- current hot-wire anemometer, and presents the equations governing its use for turbulence measurements. The thesis first enumerates and explains some of the important parameters of turbulent flows, providing the basis for the discussion of their measurement which follows. The cooling of a heated wire in forced convection and a typical anemometer circuit are discussed. Derivations of the instrument …

Design And Fabrication Of An Apparatus To Determine Heat Transfer Coefficients In An Air-Particle Mixture Over A Horizontal Flat Plate At Uniform Temperature, Louis G. Hunter Jr.

Theses and Dissertations

The study of two phase flow, where a finely divided solid is suspended in a fluid medium, has received considerable attention in the last five years due to the increased number of systems in which this phenomena occurs. The two most important areas involving the gas- particle mechanism are nuclear reactor heat exchangers and liquid and solid rockets.

Study Of Aerodynamic Forces On An Unsymmetrical Body As It Is Oscillated In A Air Stream, David Rees Tree

Theses and Dissertations

The object of this work was to design and build equipment to measure the aerodynamic forces which will cause self-induced oscillations of a body having an unsymmetrical cross-section, such as a D-section. This self-induced oscillation has been called "stall flutter" or in electrical transmission lines, "galloping-transmission lines." It is hoped that this equipment will be used to gain basic Information about these aerodynamic forces.

Computation Of The Dipole Moment Of A Coaxial Antenna In Sea Water., Richard B. Reinman

Electrical and Computer Engineering ETDs

The purpose of this paper is to develop a meaningful expression for the dipole moment in dissipative medium. Since the dipole moment is dependent on the current distribution which in turn is a function of system parameters, and might well start with determination of the input impedance. Two of the most popular methods for determining input impedance to a radiator in an air medium are 1) the induced emf method, and 2) a method whereby the power flow across a spherical surface is calculated as the radius of the sphere becomes infinite. Both methods assume a current distribution; only the …

Whole-Field Methods In The Measurement Of Post-Elastic Surface Strains, Siew Poh Chan

Mechanical Engineering ETDs

Several whole-field methods were studied and a new technique was developed for the purpose of measuring post-elastic surface strains in metals. Critical evaluation was given to the following experimental techniques: the moire effect and the birefringent coating.

Wave Propagation Past A Change In Cross-Section, Samuel A. Cone

Electrical and Computer Engineering ETDs

This thesis was undertaken to accomplish the following:

1) To experimentally determine the longitudinal strain distribution in the region of a change in cross-section of a cylindrical bar when a longitudinal wave passes this region.

2) To experimentally determine the longitudinal strain distribution in the incident, reflected and transmitted waves produced by a longitudinal wave in the region of a change in cross-section of a cylindrical bar.

3) To experimentally observe, at a distance of several bar diameters away from the change in cross section, the relation between the magnitudes of an incident longitudinal wave and the reflected and transmitted …

Fortran For The Maniac, Richard C. Lindberg

Electrical and Computer Engineering ETDs

It is not the intent of this thesis to present the rules of FORTRAN; it is assumed that the reader is generally familiar with the principles of FORTRAN programming. Rather, this is an attempt to describe FORTRAN in relation to the compiler program it actually is -- a machine language program which translates FORTRAN statements to machine language instructions, the latter capable of being executed by the same computer. The FORTRAN statements will be interpreted in terms of the compiler program which performs the translation, and algorithms for these statements will be described.

Transient Response Of Linear Undamped And Lightly Damped Lumped Spring-Mass Systems By Graphica Techniques, Richard O. Brooks

Mechanical Engineering ETDs

Responsive motions of linear undamped and lightly damped lumped spring mass systems subjected to transient inputs can be determined by several methods. All these methods require solving of the differential equation in some manner. Practically all techniques for solving the differential equations involve higher mathematics.

The Effects Of An Epoxy (Epocast 546) Upon The Tensile And Compressive Properties Of Portland Cement Concrete, Alvy C. Jackson

Civil Engineering ETDs

Although the behavioral pattern of plain concrete in compression is fairly consistent, its tensile properties leave much to be desired. The laboratory investigation described here was an attempt to increase the tensile property of plain concrete by adding an epoxy resin compound to the mixture. The investigation included tests for both compressive and tensile strengths of the mixtures that were considered. The compressive strength tests were included to determine what effect, if any, the attempt to increase the tensile property had on compressive strength.

An Investigation Of Methods For Analyzing Networks Containing One Nonlinear Element, Dustin J. Wilson

Electrical and Computer Engineering ETDs

The inclusion of a single nonlinear element in a general N-loop network greatly complicates the resulting equations and prohibits a straightforward solution. The object of this investigation is to provide a method for solving such networks. In particular, a reduction of the network coefficient matrix will be considered in order to obtain one nonlinear equation and (N-1) linear equations. It will be shown that the form of the nonlinear equations is always the same, and a procedure for approximating the solution of equations of this type will be given.

Programming Manual For The Maniac Assembly Routine, Robert C. Ashley

Electrical and Computer Engineering ETDs

No abstract provided.

B-147-63, Computation Of Outflow From Breached Dams, June 1963, Defense Intelligence Agency, Production Center, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

This guide contains detailed instructions for computing the outflow from breached dams supplemented by extensive tables and charts. The preface state that the document “contains intelligence which is not readily available through other media required for the accomplishment of the assigned mission of the Production Center and of interest to other agencies.

Transistorized Circuits For Telemetry, Dominick Misciascio Jr.

Physics & Astronomy ETDs

This thesis is concerned with the telemetry of small DC signals from photomultiplier tubes. The circuitry must have a high input impedance so as not to load down the photomultiplier tube and a low output impedance which is capable of controlling the current through a small incandescent bulb. This bulb is used to illuminate a photoresistor. The output of the circuit consists of a variation of the resistance of the photoresistor. This variable resistance is conventionally converted into a variable audio frequency which is transmitted to the receiving station on a radio-frequency carrier. The output resistance must be independent of …

A Unique Analog-To-Digital Voltage Conversion Network, Thomas O. Summers

Electrical and Computer Engineering ETDs

The increasing utilization of digital data acquisition systems has resulted in the design and development of a large number of different analog-to-digital voltage converters. Each of these designs exhibits varying specifications with regard to accuracy, speed, environmental tolerance, reliability, and cost.

These specifications are usually interrelated and the nature of the interrelations are, in turn, related to the design approach.

As an example of these interrelations, one could consider the specifications of a converter designed around an electro-optical approach requiring a cathode ray tube with coding mask. In this approach, the analog input voltage causes the deflection of a swept …

Measurement Of Thin Film Thickness By The Crystal Resonance Method, David G. Adams

Electrical and Computer Engineering ETDs

Recent years have seen a tremendous increase in thin film activity. The electronics industry, in particular, has become increasingly active in the development and production of thin film components and complete micro-electronic circuits laid down as thin films. The principal methods of producing thin films are by chemical and electrolytic processes, and by evaporation and sputtering in vacuum. One of the problems associated with film deposition in vacuum involves the measurement of film thickness, a difficult task because: 1) the thicknesses encountered are typically measured in hundreds of angstroms; 2) the films are not physically flat; and 3) they do …

Characterization Of Synthetic Resins Used In Graphite Extrusion Process, Charles I. Fairchild

Chemical and Biological Engineering ETDs

Six furan resins and one epoxy resin were used in tests to determine coking values and gas evolution characteristics of the resins. The same resins, except the epoxy, were used as binders in extruded graphite rods to determine environmental factors affecting the coked density of the rods.

Coking values of the resins containing three different activators were determined by measuring residue remaining after heat treatment to 850° C. Coking values 54-56% were obtained with 8 phr to toluenesulfonic acid actiator.

Gas evolution curves were obtained by measurement of pressure rise in a constant volume apparatus during heating to 300° C …

A Study Of The Vibration Characteristics Of A Thin Shell Hyperbolic Paraboloid, Farrin W. West

Theses and Dissertations

Recent progress in structural engineering has been marked by the increased use of thin shells as load carrying members. In particular, shells of revolution have been widely utilized in the missile industry whereas shells of arbitrary shape have been incorporated in the architectural design of today's modern buildings. Missile applications have been extensively studied both statically and dynamically. However, architechural applications have generally been limited to the statics problem with little consideration being given to the dynamic behavior of these unique structures.

Properties Of Radar Augmentation For Missile Targets., Warren T. Randall

Electrical and Computer Engineering ETDs

This thesis presents a study made to investigate problems involved in the design of certain radar augmentation devices. The task arose from the requirement to add realistic simulation of radar reflection characteristics to drone targets during an evaluation of the performance capability of the Falcon missile, conducted by Hughes Aircraft Company at Holloman Air Force Base, New Mexico. In addition to performing a mathematical analysis of the problem, the author who asked to design and build equipment which would present a visual demonstration of the reflection activities. The necessary definition of radar properties and a description of the test equipment …

The Performance Of Beams And Columns Continuously Braced With Diaphragms, George Pincus, Gordon P. Fisher

CCFSS Library (1939 - present)

INTRODUCTION In Progress Report No.1, it was reported that the initial conception of the problem was that diaphragms act almost exclusively in shear when called upon to brace compression members, and that it had been decided to test single columns with finite widths of diaphragm attached, with width of the sheet being varied to provide a range of lateral support up to that which permitted full column strength, based on strong axis to be developed. However, the first test of this kind, Test CB-l, clearly indicated that the diaphragm acted essentially in flexure only and thus had the same effect …

An Approach To Correlate Pulsed Radar And Photographic Data, Nasir Ahmed

Electrical and Computer Engineering ETDs

The Jet Propulsion Laboratory Lunar Program, which is supported by the National Aeronautics and Space Administration has two major projects underway. These are Ranger and Surveyor. The Ranger Project is in the flight stage whereas Surveyor is still in hardware development. The equipment of Ranger 3, 4, and 5 spacecrafts includes a radar altimeter to obtain radar reflection data, and a vidicon camera to obtain close-up pictures of the moon's surface. The data obtained in these flights will thus be available for analysis and comparison using the techniques outlined in this thesis.

The Chemical Oxidation Of Alkyl Benzene Sulfonates With Potassium Permanganate., Rameshchandra M. Patel

Masters Theses

"The purpose of this investigation was to study the chemical oxidation of alkyl benzene sulfonates with potassium permanganate. ABS concentrations of 3, 5 and 10 mg/1, and potassium permanganate dosages of 0.5, 1.25, 2.5, 5.0, 10.0, 20.0, 40.0 and 80.0 mg/1 were used. The study was made in deionized water at room temperature and a pH value of 8.5. A 5-hour detention period was provided. The ABS concentration, potassium permanganate concentration, foam volume and foam stability were the main parameters employed.

It was found that potassium permanganate significantly reduced the ABS concentration and foam volume. The rate of the oxidation …

A Time Optimum Bang Bang Control System Under Specified Inputs., John F. Curtin

Masters Theses

"The problem presented is a study, by simulation on an analog computer, of a time optimum "bang bang" control system with a second order plant. Phase plane analysis techniques are used to describe the performance of the second order plant under the action of a maximum effort controller. From this, the system logic is developed for time optimum response to a step reference input. A fast time model of the plant is used to obtain repeated high-speed extrapolations of the plant outputs, at the same time a linear predictor generates future values of the reference. The error functions thus found …

Firebreaks Without Erosion : Hints To Prevent Firebreak Erosion, Department Of Agriculture, Western Australia

Journal of the Department of Agriculture, Western Australia, Series 4

AGRICULTURAL fire risks are now greater than they have been in the past and are steadily increasing with the advance of agriculture in Western Australia.

During the past 20 years the area of cleared arable land and the area under crop have more than doubled.

The area of established pasture is four times as great as it was. Pastures and crops are much more productive —and more liable to carry destructive fires than they were.

Third Annual Performance Survey Of Reinforced Concrete Pipe Culverts, Ronald D. Hughes

Kentucky Transportation Center Research Report

In April, 1957, under Circular Memorandum 22-40, the Bureau of Public Roads issued a rational criterion covering beddings of reinforced concrete pipe, construction methods, and simplified methods for determining the allowable heights of fill over pipe having given D-load strengths. The states were urged to adopt the criterion; and, accordingly, the Kentucky Department of Highways issued Amendments No. 15 and 16 (Feb, 28, 1958) to its 1956 edition of Standard Specifications for Road and Bridge Construction and Standard Drawings Nos. 11.22 and 11.23. These amendments and standard drawings were patterned after the criterion of the Bureau of Public Roads but …

Development Of A Technique For The Determination Of Capillary Pressure Curves Using A Constantly Accelerated Centrifuge, Robert N. Hoffman

Masters Theses

"A new technique for determining capillary pressure curves with a centrifuge has been developed and tested. Capillary pressure curves were determined for six cores by this technique and were compared to the curves for the same cores determined by the semi-permeable barrier technique. The technique differs from previously reported centrifuge techniques in that the centrifuge was slowly accelerated from zero to the maximum desired speed, rather than being held constant at particular, progressively higher speeds. An important advantage of this technique over other methods for determining capillary pressure curves is the short time required to obtain the desired amount of …

An Investigation Of Optimum Journal Bearings., Kulin Purshotam Maskai

Masters Theses

"Not much has been done towards calculating the "Optimum Bearing" from the point of view of maximum load capacity or minimum friction. It has been found that there 1 is not much difference in the "Optimum Bearing" proportions, as calculated, considering either minimum friction or maximum load capacity

Journal bearings are commonly used and they play a very important role in reducing friction and wear. Engineers use past experience in choosing a bearing for the given conditions. A bearing design can be obtained if 'Optium Bearing' proportions are calculated as suggested by Kingsbury (1) in his article on 'Optium Conditions …