Digital Commons Network^™

Optimization Of An Lda System, Robert Smid

Symposia on Turbulence in Liquids

This paper discusses the various considerations leading to the optimization of a laser Doppler anemometer for measurements in the flows of gases, liquids, and solids. The requirements placed on the various parameters of the optics by the experiment are discussed in general for different modes of operation. Expressions determining these optical parameters in certain instances given by various authorities are presented and compared. This includes such topics as: laser power, particle size, measuring volume size, optical variation in transmitting and receiving optics, and photodetector selection.

Phase Separation In Turbulent Two-Phase Flow, Francois J. Resch, Hans J. Leutheusser

Symposia on Turbulence in Liquids

The paper is based on an experimental study of a typical instance of bubbly two-phase flow, viz. the air-entraining roller zone of hydraulic jumps in open channels. The investigation was undertaken with the aid of hot-film anemometry techniques involving instant digitization of analog signals, and delayed electronic processing of the tape-recorded data. Special computer programs were designed to separate the two phases according to a well-defined signal threshold. It is this aspect of the work which is being dealt with in the paper.

Turbulent Characteristics Of Two-Phase, Gas-Liquid Stratified Channel Flow, D. M. Johns, T. G. Theofanous, R. N. Houze

Symposia on Turbulence in Liquids

The turbulence characteristics of the bulk phases were studied in a stratified, two-dimensional, gas- liquid channel flow. Initial results are presented comparing mean velocity and turbulent intensity profiles with those obtained in a prior study at the same bulk phase Reynolds numbers. The results indicate that comparison of two realizations of stratified gas- liquid flow cannot be adequately done on the basis of bulk-phase Reynolds numbers. Comparisons must be based on some more fundamental relationships involving the gas-liquid interactions.

Experimental Measurement Of Particle Dispersion In Turbulent Flow, N. M. Howard, C. C. Meek, B. G. Jones

Symposia on Turbulence in Liquids

The dispersion of particles in turbulent flows, phenomena such as dispersion, diffusion, and sedimentation, and a more fundamental point of view, the description of particle interaction with the turbulent field are recently of increasing interest. A system capable of investigating statistical structure of the motion of particles in a turbulent fluid flow using a turbulent water pipe flow system and particles tagged with C0-60 radioactive pellets has been constructed and tested. The particles were followed in their trajectory by a group of detectors consisting of NaI(Tℓ) crystals mounted on photomultiplier tubes which move with the particles on a movable carriage. …

Conditioned Sampling Techniques, R. E. Kaplan

Symposia on Turbulence in Liquids

The concept of organized, spatially coherent large scale structures has been investigated for a variety of turbulent shear flows by a technique called "Conditional Sampling." It can be shown that these structures are related to physically important activities such as, 1) the entrainment of turbulent boundary layers, and 2) the maintenance of turbulence by a wall, 3) the growth of free shear layers, and 4) the structure and noise production of turbulent jets.

The general technique of conditioned sampling is related to visualizations of the flow, and to problems of synchronization of images in the presence of noise. While there …

A Comparison And Analysis Of Detection Methods For The Measurement Of Production In A Boundary Layer, G. R. Offen, S. J. Kline

Symposia on Turbulence in Liquids

Two hot films and dye visualizations have been employed, simultaneously, in a turbulent boundary layer to explore the relations among visual observations and five kinds of detection methods using conditional sampling. The results show that all methods correlate positively with each other, but not with high enough values of correlation coefficients to indicate true correspondence between any two thus far studied. Moreover, none of the detection methods devised to date indicate a plateau in number of events as a function of trigger threshold.

The results also provide additional information on several other matters: (i) the relationship of outward motions from …

On The Interpretation Of The Output Of Hot-Film Anemometers And A Scheme Of Dynamic Compensation For Water Temperature Variation, J. Tan-Atichat, H. M. Nagib, J. W. Pluister

Symposia on Turbulence in Liquids

Using a special calibration tunnel developed during the course of this study, the static and dynamic response of several kinds of commercially available hot-film probes with single and multiple sensors of the cylindrical-fiber type are examined. The effects of different parameters, including those of the anemometer bridge, on the output and performance of the probes are evaluated. In particular, the consequences of variations in water temperature on the hot-film anemometer output are determined. The results reveal a large effect of the water temperature on the calibration curves (in an extreme case a change in temperature of only 5.5°F can result …

An Experimental And Theoretical Study Of The Viscous Sublayer For Turbulent Tube Flow, Lindon C. Thomas, H. L. Greene

Symposia on Turbulence in Liquids

Flush-mounted anemometer probes have been used to further study characteristics of the viscous sublayer for both Newtonian and drag reducing solutions, with particular emphasis given to low Reynolds number turbulent tube flow. Experimental measurements for the mean frequency of bursting or renewal within the wall region are compared with theoretical predictions obtained on the basis of the surface renewal and penetration model.

Both theory and experiment taken together suggest that the effect of the mean axial pressure gradient on the viscous sublayer becomes important for the deeper molecular penetration associated with low Reynolds number flow. Also, a pronounced lessening of …

Oxidation State Control Of Volatile Species In Sintering, P. D. Ownby

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Polynary Silicon Arsenic Chalcogenide Glasses With High Softening Temperatures, H. E. Anthonis, N. J. Kreidl, W. H. Ratzenboeck

Materials Science and Engineering Faculty Research & Creative Works

The introduction of Ag in SiAsTe glasses permits the incorporation of Se, otherwise volatile and/or degradable as a constituent in Si-containing chalcogenide glasses. SiAsAgTeSe glasses exhibit much higher softening ranges and glass transition temperatures than encountered in known chalgogenide systems. A glass Si35As15Ag10Te20Se20 had the viscosity log ν = 13 at about 500°C, as compared to 370°C for the base glass Si35As25Te40, the viscosity of log ν = 9.8 at about 560°C, as compared to 442°C for the base glass. Phase separation occurs in the system SiAsAgTeSe and becomes manifest in two glass transitions indicated by changes in the slopes …

Legendre Coefficients For Series Solution Of The Orientation Distribution Function For Ellipsoidal Macromolecules In Two-Dimensional Laminar Flow, Myrne R. Riley

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The double refraction and viscosity of a suspension of asymmetrical colloidal particles subject to continuous laminar flow vary with the orientation distribution of the suspended particles produced by the shearing field and Brownian motion. Recursion formulas are developed for the Legendre coefficients of the series solution of the orientation distribution function for a suspension subject to two-dimensional laminar flow, thus, extending the works of Peterlin, Wayland, and Scheraga. © 1973.

Performance Degradation Due To Specular Multipath Intersymbol Interference, G. H. Smith, David R. Cunningham, Rodger E. Ziemer

Electrical and Computer Engineering Faculty Research & Creative Works

Plots of performance degradation are used to compare the effects of fading and intersymbol interference in a two-component specular multipath digital communications channel. Similar plots are then used to compare two practical receivers designed to combat the interference. Degradation plots are shown to allow easy identification of each receiver's range of usefulness, as well as identification of variance bounds demanded of channel parameter estimates which the receivers require. Copyright © 1973 by The Institute of Electrical and Electronics Engineers, Inc.

An Improved Single Flight Technique For Radar Stereo, Gordon E. Carlson

Electrical and Computer Engineering Faculty Research & Creative Works

An improved technique for obtaining stereo radar image pairs is described. The technique uses a unique combination of two different radar beam pattern characteristics. The resulting stereo radar images are illuminated from very nearly the same aircraft position which results in radar shadow and back-scatter characteristics which are very similar and in improved image registration possibilities. The reduction in illumination angle and aircraft position differences is shown to be nearly an order of magnitude or more when compared with a previously proposed single flight technique which used two vertical fan beam patterns at different azimuth angles. As a related sidelight …

Breakdown Of The Laminar Flow Regime In Permeable-Walled Ducts, E. M. Sparrow, G. S. Beavers, T. S. Chen, J. R. Lloyd

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The stability of laminar flow in a parallel-plate channel having one permeable bounding wall is investigated by means of linear theory. The analysis lakes account of the coupling of the disturbance, fields in the channel and in the permeable material and of velocity slip at the surface of the permeable wall. Complementary experiments are performed in which the breakdown of the laminar regime in flat rectangular ducts is identified from pressure-drop measurements and from flow visualization studies. The experiments cover the range of slip velocities from 15-30 percent of the mean velocity and, in addition, the case of zero slip …

Flowware -- A Flow Charting Method To Describe Digital Systems, Wayne Everett Omohundro

Doctoral Dissertations

"FLOWWARE is an interactive, graphical language to aid in the understanding and design of digital networks. The language is based upon the concept of flow charting. The user specifies the register layout of the system and the sequential operation in the form of a diagram on a graphics terminal. FLOWWARE makes full use of a local minicomputer to perform editing and drawing functions, and a remote large computer to perform translation and simulation. This division of labor allows the user to build his description off-line without having the remote computer program active"--Abstract, page ii.

Considerations In The Design Of A Network Of Minicomputers, Hardy J. Pottinger

Doctoral Dissertations

"The advantages of a network consisting of a number of minicomputers coupled to a large time shared computer are described. This type of network is very useful in the areas of data acquisition, real time control of experiments, and front-end processing for computer graphics.

Problems associated with the development of a network of this type, various possible solutions, and the trade-offs involved are presented. These problems are classified into two categories: the interface between the network and the central computing facility, and the interface between the remote sites and the rest of the network.

The design constraints, rationale, and implementation …

Implementation Of Recursive Algorithms For Delay-Time Estimation Using The Fast Walsh Transform, Donald Robert Nelson

Doctoral Dissertations

"Use of the fast Walsh transform to resolve noisy signals into Walsh function series to digitally implement maximum-likelihood parameter estimators for real-time use is investigated. Realization of estimators which seek a null in the derivative of the log-likelihood function, instead of direct maximization, results in feedback algorithms which yield considerable savings in computation time and storage. Performance of these feedback delay-estimation algorithms is characterized in terms of mean-squared error (MSE) and response to a delay step by Monte Carlo simulation. The effect of changing the number of points in the transform on the MSE is also investigated. Hard limiting of …

Diaphragm Braced Thin-Walled Open Sections And Design Of Wall Studs, Amir Simaan, Teoman Peköz

CCFSS Library (1939 - present)

INTRODUCTION Cold-formed steel wall studs generally are I, Z or channel shaped with or without stiffening lips, and with webs perpendicular to the plane of the wall. Because of their configuration and dimensions, these sections are quite unstable by themselves. However, the stability and, hence, load-carrying capacity of such studs are increased substantially once they are connected to the wallboard material. The main function of the wallboard is that of enclosure, but it serves also as a bracing system for the studs. Gypsum board, vegetable fiberboard, tempered board or plywood are commonly used wallboard materials. Such boards are connected to …

Tilt-Table Alignment For Inertial-Platform Maintenance Without A Surveyed Site, Gordon E. Carlson, Max E. Bott

Electrical and Computer Engineering Faculty Research & Creative Works

A method for aligning the rotary tilt table for an inertial-platform maintenance facility without surveying the site is analyzed and evaluated. The method utilizes multiple measurements of the tilt-table azimuth alignment error with different inertial platforms to determine a best estimate of the alignment error. Error analysis indicates that useful facility performance can be obtained with only a small number of measurements. The tilt-table alignment accuracy can be improved as more measurements of the alignment error are made during normal facility operation. © 1973, IEEE. All rights reserved.

Convergence Of Material Balance In Mathematical Simulation Of Petroleum Reservoirs, Abdul Rashid Merchant

Doctoral Dissertations

One criterion for determining the precision of pressures calculated by a simulation model is the accuracy of the material balance. A high degree of precision in the calculated pressures is a necessary condition for elimination of error in prediction of fluid migration in the reservoir. However, this condition is not sufficient to guarantee accuracy of the simulation, since inaccuracies are introduced by truncation errors, machine round-off errors, and by the use of finite difference approximations to represent nonlinear partial differential equations.

A new procedure called Error Matrix Technique has been developed for reduction of material balance errors. This reduction is …

Transient State Analysis Of Separated Flow Around A Sphere, Ching-Liang Lin

Doctoral Dissertations

"Transient state solution of the Navier Stokes equation was obtained for incompressible flow around a sphere accelerating from zero initial velocity to its terminal free falling velocity. By assuming rotational symmetry around the axis in the falling direction, the Navier Stokes equation and the continuity equation were simplified in terms of vorticity and stream function. The instantaneous acceleration of the falling sphere was calculated by considering the difference between the gravitational force and the drag force in a transient state. The governing partial differential equations were non-dimensionalized. A set of implicit finite difference equations was developed. In order to obtain …

Stability Of The Developing Laminar Flow In A Circular Tube, Lung-Mau Huang

Doctoral Dissertations

"An investigation is made of the linear stability of the developing laminar flow of an incompressible fluid in the entrance region of a circular tube. Both axisymmetric and non-axisymmetric small disturbances are considered in the analysis. The stability characteristics of the fully developed flow are also re-examined. The main flow velocity distribution used in the stability analysis is that from the solution of the linearized momentum equation. The governing equations for the disturbances and the boundary conditions constitute an eigenvalue problem which is solved by a direct numerical integration scheme along with an iteration technique. The solution starts with a …

Film Boiling Of Freon 113, Normal Pentane, Cyclopentane, And Benzene From Cylindrical Surfaces At Moderate Pressures, Gary Joseph Capone

Doctoral Dissertations

"An investigation of film boiling heat transfer in saturated pools of liquid Freon 113, Normal Pentane, Cyclopentane, and Benzene was made. The fluids were boiled from copper, cylindrical heat transfer surfaces, 3 inches long, and 0.55, 0.75, and 1.00 inch in diameter. The heat transfer elements were positioned horizontally in an autoclave and tested at moderate pressures of up to a pressure of 242.5 psia for Normal Pentane.

The experimental data are discussed and compared with known film boiling correlations. The known correlations were found to be inadequate in predicting heat transfer coefficients as a function of pressure, temperature difference …

Film Boiling Of Benzene, Freon 113, Freon 11, And Normal Pentane From Horizontal Surfaces At Atmospheric Pressure, Richard Stanley Kistler

Doctoral Dissertations

"A film boiling study was conducted with five different area flat plates at atmospheric pressure for benzene, Freon 113, Freon 11, and n-pentane. The heat transfer surface was horizontal for all tests.

The data were compared to the correlations commonly used for heat transfer. The common correlations were found to be in error for small surface sizes, but adequate for all fluids except benzene for the largest surface, a semi-empirical equation which correlates the available data as a function of surface diameter was derived and discussed"--Abstract, page iii.

Measurement Of Molecular Diffusivities Of Liquid Alkane Systems, James W. Moore

Doctoral Dissertations

"An unsteady-state porous frit method of diffusion coefficient measurement, recently developed in this laboratory, was improved and expanded upon. The experimental technique has been refined and documented. The unsteady-state diffusion of an initially 0.5 N NaCl solution into pure water (effective diffusivity -1.480 x 10^-5 cm²/sec) was employed as the calibration standard. An overall calibration precision of ±4% was obtained. Diffusion times of two hours or less were used for the non-aqueous diffusivity measurements. The validity of this measurement technique was confirmed by the agreement of the measured self-diffusion coefficient of n-heptane (25⁰C) with literature values.

A …

Parameter Identification Applied To Linear Quadratic Differential Games, John D. Corrigan

Doctoral Dissertations

"A two player zero-sum linear quadratic differential game is investigated for the case in which one of the players has incomplete a priori knowledge of the parameters of his opponent's dynamic system. This incomplete system parameter information game is shown to be playable since the ignorant player can make limiting estimates of the unknown parameters from the relative controllability condition for the game. Performance from the ignorant player's point of view is suboptimal.

It is also shown that parameter identification techniques can be applied by the ignorant player in order to directly identify the smart player's closed-loop parameters in the …

The Effects Of High Pressure And Temperature Environments On The Properties Of 6061-T651 Aluminum, Patrick George Davidson

Doctoral Dissertations

"During this experimental testing program the effects of the simultaneous application of high pressure and temperature environments on the mechanical properties of 6061-T651 aluminum were analyzed. From the data obtained at the yield and ultimate points a yield and ultimate model was developed based upon the parameters effective stress, effective strain, and the hydrostatic component of stress. This model was obtained solely from the data acquired from uniaxial tensile specimen tested at various pressures and temperatures. Two other loading paths--biaxial tension and torsion--were then used to verify the accuracy of the model. From the testing program, data were also obtained …

Numerical Simulation Of Heat, Mass, And Momentum Transfer In An Atmospheric Boundary Layer, Darrell W. Pepper

Doctoral Dissertations

"Considerable interest has developed in recent years to understand transport phenomena in thermally stratified boundary layers. More complete knowledge in this field is needed to improve the prediction of the diffusion of air pollutants in the lower atmosphere as well as in forecasting air-water circulation for weather conditions.

The atmospheric boundary layer is modeled using the equations of continuity, momentum, energy, and concentration. Closure of this set of partial differential equations is hindered by the turbulence terms. Using turbulence kinetic energy, the system of equations is closed by internally determining the exchange coefficients of heat, mass, and momentum along with …

Premartensitic Elasticity Of Fe-Ni Invars, Bryce Linn Shriver

Doctoral Dissertations

"The premartensitic temperature dependence of ultrasonic wave propagation in Fe-30 pct Ni polycrystals and Fe-32 pct Ni single crystals was measured by using a continuous wave technique. As the temperature was lowered to within 10°C of the M_s, a nonlinear decrease of the relative shear velocity was observed. This effect is related to dislocation stacking fault instabilities which may trigger the martensitic phase transformation. In addition, the single crystals show a frequency dependence of the shear elastic constant C' well above the M_s. The dispersion is believed to be caused by fluctuations in the anisotropic molecular …

A Thin Film Evaporator Rate Controller, Daniel Robert Kasterlein

Masters Theses

"A circuit is described which is used to control the evaporation rate of material from a resistance heated boat or electron beam evaporator. The rate controller is used in conjunction with a quartz crystal thickness monitor in a vacuum evaporator"--Abstract, page ii.