Digital Commons Network^™

An Analysis Of The (N-1,N) Pad ̌Approximant To The Ideal Delay Operator In Terms Of Bessell Functions., Carl Richard Erdmann

Masters Theses

"A realizable, lowpass, non-minimum phase approximation to the ideal distortion less delay operator e^-st₀ is analyzed in terms of the Bessel functions. The characteristics of the first ten members of the approximation are explicitly considered in this paper. The approximation is demonstrated to be realizable for all orders. Amplitude and phase characteristics are described in relation to the ideal delay operator in compact form and in terms of existing ii tabulated functions. Both amplitude and delay bandwidths are characterized by simple and accurate approximations. The maximally flat properties of both amplitude and delay responses are demonstrated. The transient …

Study Of Techniques For Designing Large Digital Systems Interactively., Harold Dale Puls

Masters Theses

"FLOWWARE [1-4] is an interactive register transfer language based upon the concept of flowcharting. The graphic nature of the language, however, generates a few disadvantages when it is used on a large design. Changes have been made to the basic FLOWWARE package to aid the user in specifying and displaying his design. In addition, responsibility for the design has been shifted to the remote large computer to lessen the size requirement on the local minicomputer"--Abstract, p. ii

On The Extension Of The Output Capabilities Of Flowware, A Graphical Interactive Digital System Simulator., R. Dean Delker

Masters Theses

"A research effort which addresses the problem of providing output from a register transfer level digital simulator which allows the user to better understand how his simulated system functions are described. A review of the output capabilities of existing register transfer level systems indicates that a strictly textual output leaves much to be desired, and for that reason, this work concentrates on developing forms of meaningful graphical output displays. This criterion of "meaningfulness" can be considered as a twofold objective to be reached in that the output must both reflect the functioning of the system and be presented in a …

Amine Flotation Of Feldspar From Magnetite Concentrate., Gary William Hudiburgh Jr.

Masters Theses

"The gangue in some magnetite ore bodies contains feldspar; the alkali content of the feldspar reduces the usefulness of these iron ores. One method of decreasing the feldspar content in magnetite concentrate is froth flotation.

The amine flotation of feldspar from magnetite concentrate was investigated using zeta potential measurements, Hallimond tube flotation tests and laboratory-scale flotation tests. The zeta potential of various feldspars (microcline, albite, anorthite, oligoclase and anorthoclase) were determined as a function of pH; the point of zero charge ranged from pH 1.4 to 2.5. Hallimond tube flotation tests using two amine reagents were conducted on the feldspars. …

A Training Simulation For Rural Electric Cooperative Staff., David F. Larcker

Masters Theses

"The simulation described in this thesis can be applied as a training tool to teach the management personnel of rural electric cooperatives the elements of decision making in a dynamically interreacting business environment. Initially, the major managerial problem areas of a typical rural electric cooperative were identified. These stimulated the development of a training simulation which realistically embodied the alternatives available to management personnel during the various stages of decision making. The final simulation design was a board type of game able to provide the feedback necessary for a learning experience" -- Abstract, p. ii

The Geology And Hydrogeology Of The New Lead Belt, Missouri, Charles Scott Fletcher

Masters Theses

"In order to analyze the effects of pumping groundwater from underground lead mines upon present groundwater resources of the New Lead Belt area, the geology and hydrogeology of that area must first be determined. The primary method of investigation of this analysis was interpretation of ecologic and hydrogeologic data taken from water well logs and mineral exploration well logs, with supplemental information supplied by published and unpublished literature sources. From all these sources of data, structural contour maps of the Precambrian erosional surface; the tops of the Lamotte, Bonneterre, and Davis Formations; isopachous maps of the Davis and the Lamotte/Bonneterre …

Effect Of Sweeping Sinusoidal Excitation On Nonlinear Dynamic Systems., Md. Mosharraf Hossain

Masters Theses

"The response of viscous damped, cubic spring systems to excitations having exponentially varying frequency cannot be written in a closed form. This report summarizes a numerical investigation of hardening and softening cubic systems influenced by these excitations and provides information concerning the effects of varying viscous damping, system nonlinearity, and excitation sweep rate on system behavior near resonance. Results are reported in terms of maximum response attained during sweeping and the frequency at which maximum response occurs.

It has been found that if hardening cubic systems are subjected to sweeping excitations wherein the frequency sweeps down through resonance, the maximum …

Esca Characterization Of Flotation Products From A Lead-Zinc-Copper Concentrator On The New Lead Belt Of Southeast Missouri., Kevin Leroy Purdy

Masters Theses

"Electron spectroscopy for chemical analysis (ESCA) was used to determine the surface characteristics of products from an operating Pb-Zn-Cu concentrator on the New Lead Belt of southeast Missouri and pure galena and sphalerite samples treated with flotation reagents in concentrations similar to those used in the mills. The emphasis was on the action of surface modifiers such as Na₂Cr₂O7, starch, SO₂, CuSO₄ and NaCN in sphalerite flotation and in the galena-chalcopyrite separation. The objective of the investigation was to monitor the relative oxidation states of the mineral and reagent constituents and correlate these …

Two Dimensional Radiant Interchange Between Two Isothermal Semi-Infinite Parallel Strips., Stanley Earl Mckinney

Masters Theses

"Four straight forward solution methods were used to determine the two-dimensional variation of the radiosity on two identical constant temperature, gray, semi-infinite parallel strips. Physical convergence parameters were developed for the one-dimensional case and extended to two dimensions. A study using these parameters was undertaken to identify the preferable method. The solutions obtained with this "best method" agree well with the one-dimensional solutions. The error is estimated to be less than one percent" -- Abstract, p. ii

Effect Of Nodule Count And Cooling Rate On The Matrix Of Nodular Iron., Subrata Sen Gupta

Masters Theses

"The objective of this investigation was to establish the relationship between the nodule count, the matrix structure, and the cooling rate through the eutectoid in nodular iron. The chemical composition of the nodular iron was held constant while various inoculation methods, inoculants, and mold designs, including chills, were used to vary the solidification time and cooling rate through the eutectoid range. This produced variations in both the matrix structure and the nodule count.

The nodule count has a power relationship with the percent pearlite in the matrix at fixed cooling rates: Percent pearlite = K (Nodule count)^-n where the …

Reliability Analysis Of The University Of Missouri--Rolla Reactor, Jimmy Dale Schottel

Masters Theses

"The reliability of Nuclear Installations is becoming an important area of research. In this report an approach to reliability analysis was made. The actual failure data was utilized to predict theoretical failure distributions. These distributions were then used to determine future reliability of components, subsystems and system"--Abstract, p. ii

Noise Power Estimation Based On Data Of Finite Sample Size., John Michael Koly

Masters Theses

"The method of z-transforms is used to derive the error performance of an average noise power estimator that utilizes data of finite sample size. Rectangular and trapezoidal integrators are employed by the estimator. Theoretical performance of each integrator is derived as a function of the number of samples utilized to form the estimate"-- Abstract, p. ii

Two-Dimensional Radiant Interchange In A Non-Isothermal Cavity Formed By Two Semi-Infinite Parallel Plates., Robert David Allen

Masters Theses

"Two-dimensional radiant interchange between non-isothermal, gray diffuse surfaces with non-uniform radiosity have been investigated for a cavity formed by two semi-infinite parallel plates. The problem is solved for two specific emissive power distribution models. Both emissive power distributions decay exponentially with depth into the cavity. The first emissive power distribution varies in a cosine manner across the front of the plates and the second has a step variation across the front of the plates.

For the cosine varying model, separation of variables and Ambarzumian's method are applied to obtain an integro-differential equation for the radiosity inside the cavity, an integral …

Deformation Of A System Of Clamped Thin Circular Plates With Liquid Filled Interspace., Archie Forrest Gatrost

Masters Theses

"In this work the behavior of a system of thin, circular clamped plates with liquid-filled interspace in a variable pressure environment was investigated. Six plates separated by liquid-filled chambers were arranged in alternate layers in a clamping device and a pressure was applied on one side of the six plate system. The deformation of each plate and the pressure distribution from the high pressure to low i i pressure side was measured. The plate deformation was measured by a strain gage attached at the apex of each plate and the chamber pressure by a strain gage pressure transducer.

The results …

Design Of An Auxiliary Indicator For A Fighter Aircraft., Jack L. Kubicek

Masters Theses

"The auxiliary indicator discussed in this thesis is the unit which processes signal information for a radar display indicator. The indicator provides system information to a fighter pilot in an easy to read and uncluttered manner.

The indicator displays symbols, target and advisory information for the pilot. The symbols and target information are displayed on a direct view storage tube (DVST), while pilot advisory information is displayed by means of indicator lights located around the perimeter of the display.

This thesis describes the original steps of development, starting with the original consideration of the problem and possible methods for solving …

Relative Performance Of Two Activated Carbons In Treating Pharmaceutical Waste., K. A. Narasimhan

Masters Theses

"This work examined the feasibility of the carbon adsorption system to treat a high organic strength waste (having a COD of 8,100 mg/£) from a pharmaceutical plant, and also compared the relative treatment efficiencies of two different kinds of carbon~ Calgon Filtrasorb 400 and Darco S-51, both having the same size ranges.

The overall treatment scheme employed consisted of chemical clarification and activated carbon adsorption. Jar tests were conducted to select a proper type of coagulant and determine an optimum dosage. Batch and column adsorption studies were conducted using both carbons.

Alum was found to be a better coagulant than …

Development Of A Four Channel Cloud Nucleus Spectrometer., Larry Allan Brunner

Masters Theses

"A four-channel vertical flow thermal diffusion chamber for use as a cloud nucleus counter is described. The droplets in each channel are photographically counted. The instrument provides about 20 seconds of available growth time, which enables better distinction of active droplets than does ii the conventional horizontal chamber. Droplet growth calculations show that the uncertainty in droplet count due to limited available growth time is negligible for supersaturations above 0.3% but increases rapidly as the supersaturation is lowered below 0.3%. For example, at 0.1% supersaturation, the uncertainty is -27% to +38% in the drop count. The possible error in supersaturation …

Thermal Fragmentation Of Rock - The Influence Of Temperature Dependent Material Properties., James Dale Scheller

Masters Theses

"This investigation is concerned with a thermal rock fragmentation system employing heat to create subsurface thermal inclusions. The effectiveness of this system as applied to three different rock types is studied. The rock types are Dresser basalt, Charcoal gray granite, and Sioux quartzite. Also, the influence of temperature dependent material properties is investigated.

The actual three-dimensional problem of in situ rock fragmentation involves parallel rows of equally spaced holes drilled to a constant depth. A heat source at the bottom of each hole creates a thermal inclusion resulting in a stress field causing fracture.

Axisymmetric models of the fragmentation system …

Post Irradiation Changes Of The Elastic Modulus Of Aluminum, Dale A. Powers

Masters Theses

"Aluminum samples of 99.99% and 99.999% purity were irradiated to neutron fluences of 3·8·10¹⁸ nvt and 1.4·10¹⁹ nvt (E greater than 0.1 Mev) at one-third of the melting temperature. The change in Young's modulus of elasticity after isothermal annealing in the temperature range of 110⁰C to 130⁰C was measured. After 2.5 hours of annealing, the modulus reached a steady state value which was decreased by 0.25% ± 0.17% from the unannealed value. Electron microscopy suggests the hardening mechanisms were dispersion hardening by silicon precipitates and void hardening"--Abstract, page ii.

Combined Forced And Free Convection On A Vertical Cylinder And Flat Plate, Aleksandros Mucoglu

Masters Theses

"In the study of fluid flow over heated surfaces, it is customary to neglect the effects of buoyancy force when the flow is horizontal. However, such a practice is not justified when the forced flow is along an inclined or a vertical surface, because under these conditions the buoyancy force modifies considerably the flow field and hence the heat transfer rate from the surface. Such a flow is termed combined forced and free convective flow.

The present study is concerned with the effects of buoyancy force on forced convection along an isothermal vertical cylinder and a flat plate. This type …

Local Buckling Of Cold-Formed Steel Structural Members Having Initially Curved Compression Elements, William M. Mckinney

Masters Theses

"A comprehensive investigation of the effect of initial deviation from flatness on buckling stress and post-buckling strength of compression elements in structural plate members is presented. The study of stiffened and unstiffened elements expands the scope of elastic stability for initially curved plates. Finite element techniques were utilized for the study of unstiffened elements"--Abstract, page ii.

A Planning Study On The Electrical Load Requirement For The New Town Of Pattonsburg, Javad Yousefian

Masters Theses

"Because of an Army Corps of Engineer proposed new dam on the Grand River 1 the original town of Pattonsburg, Missouri was to be inundated by the resulting lake reservoir formed above the dam. The city planners proposed the relocation of the town site adjacent to the new lake, forming a lake side community attractive to both a residential population and for industrial locations.

The electrical power loads of New Pattonsburg's residential, industrial, commercial, and municipal areas, as well as its street lighting power requirements, were planned for a population of 50,000. Statistical analysis of demographic surveys was employed to …

Investigation Of The Electric Field In The Vicinity Of A Water Drop Adhering To A Conductor, Jamnarn Hokierti

Masters Theses

"Electric field calculations in the vicinity of a conductor above ground are developed with constraints on the distance from the conductor for which the electric field equations can be applied for practical applications. The electric field in the vicinity of a small water drop adhering to the conductor has been calculated. Application of this electric field in the vicinity of the water drop has been used to compute the apparent surface charges and also the forces on the small water drop surface. Methods for the calculation of space charge due to ionization on the water drop has been suggested"--Abstract, page …

Distribution Of Ambient Particulates And Particulate Trace Metals Around The Amax Smelter, Pramod Maneklal Shah

Masters Theses

"The purpose of this investigation was to study the distribution of metallic particulates in the air surrounding the AMAX Lead Company of Missouri smelter in the "New Lead Belt" of southeast Missouri. The study included the evaluation of the temporal and spatial variation of dustfall and deposition rates of settleable particulate lead, zinc, copper, and cadmium, and transport and distribution of total suspended particulates and suspended particulate trace metals.

The study was conducted within a 3 x 3-mile grid around the smelter employing twenty dustfall stations and five HiVolurne samplers. The samples collected were analyzed for lead, zinc, copper and …

Laser Holographic Interferometric Investigation Of Heat Transfer About An Isothermal Vertical Flat Plate, Richard Michael Quinlisk

Masters Theses

"A study of the laser holographic interferometer was conducted to compare heat transfer data obtained with the device to standard free convection boundary layer theory. The system studied was an isothermal vertical flat plate. The interferometer was used to obtain fringe patterns of the boundary layer at the plate surface.

Data from the holographic interferograms were recorded by making conventional two-dimensional photographs of the holographic images.

The optical data are shown to have a good correlation to Von-Karman theory. Values of the boundary layer thickness, temperature distribution, and heat transfer were compared. An attempt was made to probe the boundary …

Electrical Cable Design And Applications, Robert William Buente

Masters Theses

"The materials available for constructing various electrical cables are discussed, along with remarks/ pertaining to the attributes and limitations of each. The installation and maintenance considerations are discussed in detail. Electrical considerations involved with designing a cable system are outlined with references to their specific application. Special cable constructions, their applications, and their typical modes of installation are reviewed. The conclusion explains an overall cable system design approach along with miscellaneous information"--Abstract, page ii.

An Investigation Of The Vertical Distribution Of Sulfur Forms In Surface Mine Spoils, Henry County, Missouri, Walter Carter Von Demfange Jr.

Masters Theses

"Samples of material in the spoil banks left by surface coal mining operations in Henry County Missouri were taken from various depths and preserved to prevent further oxidation of the pyrite in the samples. Quantitative determinations were then made for sulfate and sulfide sulfur. It was shown that near the surface the sulfide sulfur concentrations were much lower than those at greater depth while sulfate concentrations were higher near the surface than at depth. Since this is probably the effect of years of oxidation of the pyrite, it can be used to show at what depth the pyrite is being …

A Systems Approach To Evaluating The Effectiveness Of Training Programs, Jesse Michael Haverstick

Masters Theses

"The evaluation of the effectiveness of training programs has long been recognized as a necessity in determining the allocation of investment. However, much of industry, today, still does not use an easily administered, systematic, and reliable method for determining training program effectiveness for their salaried (managerial) personnel. It is easily seen that determining training program effectiveness is not a one-shot, one-time event, but a continual process, whose aim, ultimately, is increased productivity. For the effectiveness of a training program to be adequately monitored, these four areas should be measured: (1) trainee attitude, (2) learning, (3) behavior change, and (4) productivity …

Calculation Of The Neutron Flux In The Side Regions Of The Prestressed Concrete Reactor Vessel Of A High Temperature Gas Cooled Reactor, Richard Robert Kent Jr.

Masters Theses

"Neutron flux in the side regions of the High Temperature Gas Cooled Reactor's (HTGR) Prestressed Concrete Reactor Vessel (PCRV) was determined using the Monte Carlo method. One quarter of the PCRV was modeled, with all major structures inside it, e.g. steam generator, auxiliary cooling loop, etc. imaged at their exact position and size. Initial neutron energies range from .001 eV to 3 MeV. Three neutron interactions were considered: absorbtion, elastic scattering, and inelastic scattering.

The flux was calculated for two different PCRV temperatures, 155° F and 647° F. The thermal flux showed a minor increase at the higher temperature. In …

Possible Damage Mechanism In Dresden 2 Class Boiling Water Reactor Fuel, Donald Lee Moffett

Masters Theses

"A thermal hydraulic analysis of a typical hot channel of a Dresden 2 class boiling water reactor is studied for possible severe local overheating. The COBRA-II thermal hydraulic analysis code is modified to include critical heat flux calculations for each subchannel. The effects of flow distribution, inlet mass velocity variations, dimensional tolerances, enrichment variations, and input parameters are examined in detail. Bulk channel results are in good agreement with the published data, but the assembly wall side of the corner fuel rod has a minimum critical heat flux ratio of less than unity for a number of the situations examined. …