Digital Commons Network^™

Performance And Economic Evaluation Of Asphalt-Based High Friction Surface Treatment (Hfst) Applications, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High Friction Surface Treatments (HFSTs) are recognized for enhancing friction between tires and road surfaces, with reduced road accidents being a key benefit. Epoxy-based HFSTs, though widely used, come with challenges like compatibility issues with existing pavements, higher installation and removal costs, and reduced durability tied to substrate quality. Recently, state agencies have increasingly focused on developing asphalt-based alternative binders for HFST applications as highlighted in the National Cooperative Highway Research Program (NCHRP) RFP #NCHRP 10-145. This study introduces asphalt-based HFSTs as an alternative to traditional epoxy-based treatments. Various aggregate types were examined for friction performance and the effect of …

Challenges In Numerical Simulation Of Frost Heave, Antai Dong, Xiong Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Frost heave of soil extensively exists in northern regions and poses a significant threat to infrastructure in cold regions. Despite over a century of research, challenges persist in numerically simulating frost heave. This study addresses two key issues: (1) What is the primary driving force for liquid water transfer during the freezing process? (2) How can we correctly represent unfrozen water content? Critical insights are derived from the theoretical analysis of coupled hydrothermal migration during soil freezing processes, followed by a case simulation using COMSOL Multiphysics. It concludes that of the water content gradient, suction gradient, and hydraulic gradient, only …

On High-Speed Breakup Of Water Droplets Behind High Mach Number Shocks, Sydney M. Briggs

Graduate Thesis and Dissertation post-2024

Water droplet breakup in high-speed flow is a relatively popular experimental study to analyze breakup mechanisms. There is a plethora of experiments performed at low Mach number and low Weber number, but studies with higher speed flows and higher Weber numbers are less common. In this study, water droplet breakup is assessed using high-speed shock waves (Mach 2.3-above Mach 5) in a shock tube. Multiple methods are used to introduce droplets, and multiple different water purity levels are considered. An assessment was made into whether cavitation played a role in the breakup process physically, as this has been a budding …

Evaluation Of Heavy Metal Bioaccumulation And Growth In Hemp From Chicken Manure, Vermicompost, And Wastewater Sludge With Biochar And Health Risk Assessment, Chutiphan Sangsoda

Chulalongkorn University Theses and Dissertations (Chula ETD)

Hemp (Cannabis sativa L.) has become an economically valuable crop with a wide range of benefits. To promote more sustainable agricultural systems, the use of recycled substrates has increasingly replaced traditional fertilizers. However, substrates such as dry chicken manure, vermicompost, and wastewater sludge (WWS) combined with biochar often contain heavy metal contaminants, which may pose health risks through exposure to hemp. This study investigated three cultivars Rosella, Superwoman S1, and Red Robin over a 120-day period. The objectives were: (1) to compare the effects of dry chicken manure, vermicompost, and wastewater sludge (with and without biochar) on soil nutrient quality …

Interaction Between Extreme Temperature Events And Air Pollution On Mortality In Thailand : A Nationwide Time Series Study, Phichet Khunthong

Chulalongkorn University Theses and Dissertations (Chula ETD)

Climate change has increased the frequency and intensity of extreme temperature events (ETEs; heat and cold waves), concomitantly affecting PM2.5 fluctuation. However, limited research has investigated the interaction of ETEs and PM2.5 on mortality, particularly in tropical regions where the interaction could influence differently from cold countries. A two-stage time-series using distributed lag non-linear models was employed to estimate region-specific relative risks and 95% confidence intervals (RRs and 95% CIs) of ETEs and PM2.5 on daily cardiovascular and respiratory mortality. The relative excess risk due to interaction (RERI) was examined to quantify additive effects. Cold waves had the greatest effect …

Exploring Research And Tools In Ai Security: A Systematic Mapping Study, Sidhant Narula, Mohammad Ghasemigol, Javier Carnerero-Cano, Amanda Minnich, Emil Lupu, Daniel Takabi

School of Cybersecurity Faculty Publications

With the pervasive integration of artificial intelligence (AI) in various facets of modern technology, the importance of AI security has been thrust into the spotlight. The field is rapidly evolving, with new challenges and solutions emerging at a swift pace. However, the breadth and depth of AI security research have not been comprehensively mapped in recent times, presenting a crucial need for an extensive review and synthesis of existing literature. Given the increasing reliance on AI in critical domains such as healthcare, finance, and national security, ensuring the resilience and trustworthiness of these systems is imperative. This survey fulfills the …

Autonomous Vehicle Supported Mobility Services For Rural Areas, Alvira Ahmed Tasnim

Graduate Theses, Dissertations, and Problem Reports (ETD)

Autonomous Vehicles (AVs) are emerging as a promising mobility solution to address growing transportation demands, particularly unmet traffic demand in rural areas where conventional transit systems often fall short. Rural areas face unique mobility challenges due to dispersed populations, limited infrastructure, and low/no transit coverage. Existing transit services tend to concentrate around dense urban cores, leaving low-demand areas outside underserved. This spatial undercoverage leads to significant mobility gaps for rural residents. This study examines the potential of AV-based ride-sharing services to address these mobility needs by providing flexible, demand-responsive mobility services where fixed-route transit services are either economically or operationally …

Deep Target Recognition: Semi-Supervised Annotation, Sensor Fusion And Super-Resolution, Shoaib Meraj Sami

Graduate Theses, Dissertations, and Problem Reports (ETD)

Despite the recent expansion of machine learning algorithms to cover a wide range of disciplines, several areas of automatic target recognition (ATR) remain underexplored. This dissertation presents tools developed to improve performance in three significant aspects of ATR: semi-supervised annotation, sensor fusion, and image super-resolution. The aim of the semi-supervised methods is to automatically annotate targets in scenarios where labeled data are scarce in the target domain but available in the source domain. Secondly, to address the limitations of individual image sensors and enhance robustness under different environmental conditions and man-made constraints, a sensor fusion algorithm was developed to improve …

Development Of A Model To Estimate Engine Crankcase Methane Vent Emission Rates, Juan Pablo Rincon

Graduate Theses, Dissertations, and Problem Reports (ETD)

The primary focus of this research is the modeling and validation of crankcase methane emissions stemming from natural gas combustion engines commonly deployed in the natural gas compression industry. The models employed rely on equations predicting the flow rate and composition of losses, typically generated within reciprocating piston-cylinder systems. Since crankcase emissions originate in a piston–cylinder arrangement, multiple variables were considered in this study, including displaced volume, pressure, temperature, flow, and viscosity (with corrections applied to account for the thermal and compositional effects on the mixture of fluids). The initial data for this research was collected during three measurement campaigns …

Mathematical Modeling For Interdisciplinary Stem Problem-Solving, Dayat Hidayat, Signe Kastberg

Indiana STEM Education Conference

STEM education supports students’ real-world problem solving by utilizing connections between STEM disciplines. Yet teachers have questions about how to provide such support. Mathematical modeling involves the use of mathematics content and processes to solve problems in integrated STEM contexts. In this research brief we illustrate how mathematical modeling can support students’ integrated STEM problem solving.

A Study Of The Properties Of Fleece Knitted Fabrics Made From Cotton And Different Types Of Regenerated Cellulosic Fibers For Apparel Use, Mohamed Hakam, Alaa Arafa Badr, Ashraf El-Nahrawy

Mansoura Engineering Journal

Yarn material and fabric type affect the quality of knitted fabric. Weather temperature, humidity, and moisture resistance of the garment are the primary factors that determine the evaporation rate of sweat from the body surface. Also, some physical and mechanical properties control the comfort level required by the customer. The present research work was carried out by varying the following parameters: Yarn type with different materials was changed by changing yarn cones through the creel of the knitting machine. Machine Parameters, in this study samples were made on Two- Thread Fleece, and Three- Thread Fleece Machines. These parameters have been …

Intelligent Tutoring Systems In The Age Of Llm-Based Agentic Frameworks - Adapting Small On-Device Language Models For Fact-Checking And Student Compliance Detection, Evan Vahid Naderi

Honors Undergraduate Theses

As large language models (LLMs) demonstrate increasingly sophisticated language understanding capabilities, they offer transformative potential for educational technology, particularly in developing more responsive intelligent tutoring systems (ITS). To develop these systems, a synthesis that balances theoretical frameworks with practical, cutting-edge, and deployable technology would be useful. This thesis aims to advance the field of ITSs theoretically by viewing the modern advancements in natural language processing within the context of the foundational frameworks important to the fields of self-regulated learning, ITSs, and cognitive agents. Then, building on prior research on the ITS MetaTutor \citep{Azevedo2022}, this research focuses on how functions of …

Effects Of Changes In Strouhal And Reynolds Numbers On Beetle Wing Aerodynamics, Keith L. Thiha

Honors Undergraduate Theses

Insect flight has long been a subject of interest across the scientific community, largely due to the exceptional aerodynamic performance insects demonstrate relative to their size. Insects tend to have very high aerodynamic performance characteristics like thrust and lift generation compared to their size. This has many potential applications in improving aircraft performance, however the flow phenomena concerning insect wing aerodynamics is still an area of ongoing research. This study aims to investigate how variations in key nondimensional flow parameters—specifically the Reynolds number and Strouhal number—affect the aerodynamic performance of beetle wings. Strouhal numbers ranging from 0.2 to 0.6 were …

Phase-Field Modeling Of Rapid Solidification Processes, Nima Najafizadeh

Doctoral Dissertations

"Many advanced manufacturing processes such as additive manufacturing utilize rapid solidification of alloys, as it enables the formation of exotic non-equilibrium microstructure and thus improved properties. However, the interrelationship between the processing parameters and the resulting microstructure in rapid solidification is yet to be fully understood. We aim to investigate the microstructure evolutions during the rapid solidifications using phase-field modeling. The phase-field method assumes a diffuse interface, which avoids tracking the moving interface and hence enables efficient numerical simulations for complex microstructure evolution. A phase-field model with coupled solute-thermal diffusion and solute trapping effect is developed to investigate the rapid …

Drone-Based Multimodal Sensing On Vegetations And Data Analytics For Early Detection Of Gas Leakage From Underground Pipelines, Pengfei Ma

Doctoral Dissertations

"This study explored the feasibility of using multimodal remote sensors in the early detection of natural gas leaks from underground pipelines, as vegetation situated above pipelines can discern microbial changes in soil when affected by gas and exhibit physiological stress symptoms on leaves. Three sensors (RBG, thermal, and hyperspectral cameras) were utilized to monitor vegetation stress as an indicator of gas leaks. A laboratory experiment was conducted to evaluate the workability of vegetation for gas leak detection. Regular hyperspectral imagery was collected from test vegetations to identify gas stress and distinguish it from other environmental stressors such as salinity impact, …

Processing And Densification Of Multi-Phase High-Entropy Ceramics, Steven Smith

Doctoral Dissertations

"This work focuses on the processing and densification of multiphase, high-entropy ceramics to promote their use in friction stir welding technologies. Several high-entropy systems including high-entropy borides, carbides, and their composites were produced. Boro/carbothermal and carbothermal synthesis were used to produce high-entropy powders from oxide powder mixtures. Composites of high-entropy borides and high-entropy carbides were produced using a sequential approach to produce both phases. The carbide was first produced using carbothermal reduction, then ZrH2 and B4C were added to the carbide powder to produce the high-entropy boride phase. The resulting powder was densified by spark plasma sintering and pressureless sintering, …

Raft-Based Polymer And Nanoparticle Materials For Traumatic Brain Injury Treatment And Diagnostics, Aaron Priester

Doctoral Dissertations

"Traumatic brain injury (TBI) is a leading cause of death and disability worldwide. Neurodegenerative diseases that develop post-TBI can be, in part, attributed to DNA and cell-damaging reactive oxygen species (ROS) and lipid peroxidation products (LPOx). This thesis focused on overcoming the limits of current TBI material treatment approaches by employing a RAFT (reversible-addition fragmentation chain transfer) polymer approach that incorporated novel therapeutic, diagnostic and peptide-targeting monomers. An improved nanoparticle synthesis approach was also developed. Thiol and thioether-containing monomers neutralize both ROS and LPOx while Gd-containing monomers with enhanced magnetic resonance imaging (MRI) contrast provide diagnostics and material tracking in …

The Evolving Use Of Strategic Planning Tools In The Manufacturing Environment: Implications For Quality 4.0 And Beyond, Richard Lee Wilson

Doctoral Dissertations

"Having a strong strategic plan is critical for success for any business no matter the size of the organization, the product or service they provide, or the industry they serve. There are many methods businesses use to develop their strategic plans. One such method is known as Hoshin Kanri, which has been in use for decades. However, recent years have seen an increase in artificial intelligence, big data, data analytics, and other technology tools to create cyber physical systems on the manufacturing floor. The increase in technology in manufacturing to integrate cyber systems with physical systems spawned a new industrial …

Shock Wave And Vortex Ring Dynamics From Explosively Driven Shock Tunnels, Rachel Louise Bauer

Doctoral Dissertations

"Blast and shock tubes are frequently used to create shock waves to study their effects and impacts on structures, humans, and personal protective equipment. These tubes are also found in other industries including wind tunnels for aerodynamic testing, jet engines for propulsion research, spacecraft reentry simulations, and industrial applications such as material testing and high-velocity impact studies. Despite their widespread use, there is no standard design, with variations in geometry, size, and energy sources. Current research only evaluates the peak pressure of the shock wave produced and does not consider the effects of changing the size or geometry of the …

Transport And Plugging Behavior Of Co2-Resistant Preformed Particle Gels In High Conductive Channels For Conformance Control, Adel Alotibi

Doctoral Dissertations

"Improving oil recovery is essential with rising global oil demand and declining production in mature fields. CO₂ flooding has been widely applied as a major Enhanced Oil Recovery (EOR) method due to its effectiveness in boosting oil recovery while enabling safe carbon storage in the subsurface. However, in fractured and highly heterogeneous reservoirs, CO₂ often flows through paths of least resistance, leading to early breakthrough or quick excessive CO₂ production and leaving substantial oil in unswept zones or areas. Traditional in-situ polymer gels have been applied to control CO₂ flooding conformance, their performance has been varied, …

Development And Testing Of Irradiation-Tolerant High-Entropy Alloys, Matthew John Luebbe

Doctoral Dissertations

"High entropy alloys (HEAs) are a novel class of alloys made of multiple principal elements in near equal proportions. They have been observed to possess an array of useful engineering properties, such as good ductility and fracture toughness, high temperature strength, oxidation and corrosion resistance and irradiation resistance. This makes them promising candidates for harsh environments, especially nuclear reactors. These properties could potentially realize advanced Gen IV nuclear reactor designs. However, most HEA compositions contain Co, which activates under irradiation, generating safety and waste management concerns. This work studies three compositions of Co-free HEAs whose strength and microstructures are evaluated …

Nmr Relaxometry Approach For The Detection Of Asphalt Binder Performance Properties, Rebecca Herndon

Doctoral Dissertations

"Asphalt is a necessary material for transportation infrastructure. Understanding the material properties of asphalt binders is critical for improving infrastructure and enhancing the lifetime of pavements. While the physical properties of asphalt binders are well-defined by standard procedures and parameters, the chemical environment lacks definition. Physical parameters like viscosity and stiffness are traditionally used to differentiate asphalt binders, describe aging, and indicate the impact of additives. However, these tests have limited insight into the material's chemical environment. Therefore, a nondestructive analytical technique, nuclear magnetic resonance (NMR) relaxometry, was employed to investigate the chemical environment of asphalt binders. Although NMR relaxometry …

Advancing Refuge Alternatives In Mine Emergencies Using Advanced Numerical Simulation, Kutay Emre Karadeniz

Doctoral Dissertations

"Incidents and emergencies within underground coal mines can result in severe injuries or even loss of life, particularly due to the hazardous nature of mine explosions. One of the options for the miners to protect themselves from these hazards is to be sheltered in a refuge alternative (RA). However, the literature lacks an analysis of survivability constraints and the structural integrity of RAs when exposed to geomechanical changes and the ability to withstand the impact of coal mine explosions. In this study, based on the utilization and survivability constraints, basic human requirements and the required physical specifications of RAs during …

Vibration Modeling Of Rectangular Plates And Application To Solar Cell Dust Mitigation, Jeremiah John Rittenhouse

Doctoral Dissertations

"Many engineering structures can be modeled as rectangular plates, including solar cells. Carefully controlled plate vibration can be useful to solve an engineering problem, such as lunar dust accumulation on solar cells, which blocks light and reduces power generation. For this application, plate vibration at resonance is studied and used experimentally to eject lunar dust from a solar cell.

Piezoelectric actuator placement on the inactive side of a solar cell to induce vibration dust mitigation from the active side of the cell is presented in this work. Three solar cell prototypes were created and tested for efficacy, resulting in an …

Exploring The Feasibility Of Innovative Integration Of Phase Change Materials For Thermo-Adaptive Asphalt Pavements, Farshad Saberi Kerahroudi

Doctoral Dissertations

"Current research examined the feasibility and efficiency of employing phase change materials (PCMs) in asphalt pavement materials to result in thermo-adaptive asphalt pavement. The PCM was introduced to the asphalt materials in three different scales, including asphalt binder, asphalt mastic, and asphalt mixture. After investigating asphalt at different scales, mix blending method was found as the easiest method without any complexity to mix asphalt binder with PCM. The testing results could reveal an improvement in the high temperature performance of asphalt binder without sacrificing the low temperature performance with the presence of PCM and Gilsonite. Also, introducing PCM to asphalt …

Ceramic Dielectrics For High Temperature Capacitor Applications, Alan Daniel Devoe

Doctoral Dissertations

Technical progress in microelectronics is allowing operation in environments that were previously considered impossible. Building complete electronic circuits for applications above 450 degrees C, such as the planned NASA missions to Venus, require a variety of active and passive components, including multilayer ceramic capacitors (MLCC).

This study explores calcium zirconate CaZrO3 and magnesium oxide MgO based dielectric compositions for MLCC applications that are capable of operating at extreme temperatures between 450 degrees C and 600 degrees C. Both materials were characterized with respect to impurities, dopants, crystal structure and microstructural development. Dielectric properties were measured to determine permittivity, dissipation factor, …

Applying Human System Integration Principles To The Investigation, Design And Validation Of Interventions For Self-Escape In Underground Mines, Eugene Adubofour Gyawu

Doctoral Dissertations

This dissertation investigates the use of human systems integration (HSI) to develop technologies for miners’ self-escape during a mine emergency, addressing barriers that compromise miner safety during emergencies.

Recognizing the inherently hazardous nature of underground mining, this study has three core objectives: (1) assessing miners' perceptions of proposed self-escape interventions, (2) designing interventions based on these insights, and (3) validating their effectiveness using experimental testing. This work evaluates self-escape interventions for both coal and metal/non-metal miners using scenario-based surveys, information design reviews, label designs and experimental testing methods varying across three distinct studies.

Results reveal that miners identified improvements to …

Implication And Applications Of Machine Learning On Biomedical Images, Jason Hagerty

Doctoral Dissertations

Medical imaging ranges in modality including computer tomography imaging, x-ray imaging, digital microscopy, and macro-focus dermoscopy images. The latter two modalities are the focus of the presented work.

To perform a diagnostic evaluation on the captured dermoscopy image, it begins with what is usually a labor-intensive operation that requires an expert to perform the initial segmentation for localizing a region of interest (ROI). Once that ROI is obtained, a physician with years of training and experience will observe biological markers that can be used to visually differentiate whether a lesion is benign or malignant. A similar process is used for …

Metal-Organic Thin Film Coated On Optical Fiber, Nahideh Salehifar

Doctoral Dissertations

This dissertation explores the development of metal-organic framework (MOF)-based optical fiber sensors for detecting volatile organic compounds (VOCs) at low concentrations (parts-per-billion to parts-per-million). In the first part of the study, theoretical calculations were performed using effective medium approximation (EMA) models, including Lorentz–Lorentz, Maxwell–Garnett, and Bruggeman equations, to predict the refractive index changes of MOFs upon gas adsorption. These models were applied to MOFs such as ZIF-7, ZIF-8, ZIF-90, MIL-101(Cr), and HKUST-1 to evaluate their potential for gas sensing.

In the second part of the dissertation, experimental work was conducted to validate the theoretical predictions. MOF-coated optical fibers were fabricated …

Systematic Esd Analysis And Modeling For Electronic Device, Zhekun Peng

Doctoral Dissertations

Systematic ESD analysis provides good pre-compliance to ESD robustness evaluation on the electronic device from device level to component/system level to on-chip level. The whole process involves corona discharge on display, system level ESD analysis on PCB for race condition and transient response and 3D IC package impact to on-die ESD.

ESD to the display cover glass can damage touchscreen traces by sparkless corona discharges on the glass surface. A non-linear time dependent transmission-line model is proposed to model corona streamer propagation in terms of the coupling current and propagation speed. Results are highly promising to model the corona discharge …