Digital Commons Network^™

From Industrial Automation To Intelligent Automation: The Impact Of Iiot On Process Control - A Review?, Ali S. Allahloh, Mohammad Sarfraz, Duraid Y. Mohammed, Nadeen Khaleel Ibrahim, Hayder Hussein Thary

Iraqi Journal for Computer Science and Mathematics

The Industrial Internet of Things (IIoT) is reshaping process control, turning torrents of plant data into near-instant insight. Field evidence already shows unplanned-downtime cuts of 55%, maintenance-budget savings of 40%, and gains in overall-equipment-effectiveness of roughly 15%; nevertheless, fewer than 30% of facilities have pushed beyond pilot scale to full, always-on predictive maintenance. To clarify why, this review screens 312 Scopus records published between 2010 and 2023, then subjects 62 peer-reviewed studies and a broad set of industry reports to deep content analysis, bibliometric mapping, and thematic clustering.The results reveal four tightly connected research fronts—IIoT/Industry 4.0 core technologies, classical process-control …

Internet Of Things For Sustainable Transportation Systems, Ayodeji Akinsoji Okubanjo, Ignatius Kema Okakwu, Oluyinka Esther Olaifa, Matthew Babatunde Olajide, Olufemi Peter Alao, Olayiwola Abisola

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

This paper highlights the opportunities for the Internet of Things in the transportation industry. The need for the Internet of Things and its architecture to address various complex challenges in the transportation sector are discussed. Various smart applications of the Internet of Things and its noticeable benefits over the existing technology are well articulated. In addition, the role of new and emerging technology such as artificial intelligence, machine learning, big data, cloud, data storage, and analysis for future sustainable transportation are highlighted with specific cases. Furthermore, smart areas of the Internet of Things in transportation are pictorially discussed. In addition, …

Utilization Of Ftir-Atr For Material Characterization And Forensic Analysis, Helmut Leodarta, Ahmed S. El-Ashwah, Punyaslok Rath, Magdy Abdelrahman, William G. Buttlar

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The growing use of chemical modifiers and additives in asphalt mixtures necessitates a reliable system for their identification and quantification, crucial for quality control, assurance, and forensic investigations. Fourier Transform Infrared (FTIR) spectroscopy offers a cost-effective method by analyzing the interaction of infrared light with chemical groups, producing distinct spectral fingerprints. This study evaluates 44 materials, including binders, warm mix additives (WMAs), rejuvenators, release agents, and concrete admixtures. It also assesses the ability of FTIR testing to identify and quantify chemical changes and aging in asphalt binders with rejuvenator addition. An Attenuated Total Reflectance (ATR) accessory was employed for practical …

Studying Effect Of Temperature On Photovoltaic Characteristics Of Photovoltaic Modules Based On Cigs Solar Cells, Farrux Anvar O‘G‘Li Akbarov, Anvar Akbarovich Alimov

Technical science and innovation

The article presents the experimental results of the temperature dependence of the load current-voltage characteristics of a solar photovoltaic (PV) module based on a polycrystalline semiconductor binary compound Cu(In,Ga)Se₂ under normal sunlight P_rad=800±5 W/m², in a temperature range of (32÷60) ^оС. It was found that the temperature dependence of the photocurrent has two slopes, which is explained by a change in the generation-recombination mechanism. An increase in the short-circuit current with an increase in the temperature of the photovoltaic module is explained by an increase in the drift length of minority charge carriers, due …

Chromatography In Analysis And Quality Control Of Oil And Gas Products: Modern Approaches And Prospects, Muborak Akramovna Mirshomilova, Natalia Evgenievna Sheina, Lala Bekirova

Technical science and innovation

Chromatography plays a key role in the analysis and quality control of oil and gas products. Modern chromatographic methods, including gas and liquid chromatography, provide high accuracy, sensitivity and speed of analysis. They allow you to identify impurities, control the composition and compliance of products with standards. The article considers innovative approaches, such as multidimensional chromatography and the use of automated systems. Development prospects are discussed, including integration with AI and digital technologies, which opens up new opportunities to improve the efficiency of quality control in the oil and gas industry. This article considers the role of chromatographic methods in …

Research Of Hereditarily Deformable Structures Under Seismic Impacts, Abdali Abdukarimov, Kazbek Nuratdinov

Technical science and innovation

This article examines the responses of a structure to both single-component and multi-component seismic impacts if they are generally described by three linear displacements and three rotations of the foundation relative to three orthogonal axes.

A mathematical apparatus has been created that allows developing statistical theories of seismic resistance for studying hereditarily deformable structures under random seismic impacts. Using impulse transition functions, having established the explicit form of the reaction of hereditarily deformable structures to an arbitrary form of random disturbance, it is possible to determine: the mathematical expectation and moments of the outgoing process; correlation functions; spectral densities, i.e. …

Mechanical And Deformation Behavior Of Silt Reinforced With Wicking Geotextile: An Experimental Study, Yipeng Guo, Yiyong Xue, Yongjie Zhang, Wei Ruan, Yafeng Li, Xiong Zhang, Zhili Han

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Silt is widely utilized as a filling material in transportation construction, However, it frequently suffers from problems, such as excess pore water pressure buildup, settlement, and mud pumping. Wicking geotextiles have emerged as a sustainable solution by improving both drainage and reinforcement capacities, yet their optimal design parameters remain unclear. To address this gap, a series of tests were performed to investigate the effects of compaction degree, reinforcement configuration (number, spacing, position), and specimen geometry on the mechanical and consolidation of silt reinforced with wicking geotextiles. The results reveal that the failure mechanism of reinforced silt progresses through four distinct …

Research On Geological Complications Occurring During Drilling Operations At Uzbekneftegaz Jsc Wells, Otabek Rajabovich Eshmurodov, Komilxodja Anvarxodjayevich Raximov, Shaxnoza Hikmatullayevna Mirsaatova, Tolib Olimovich Komilov, Sherali Halloqovich Umedov

Technical science and innovation

This article presents an analysis of maintaining wellbore stability, preventing pack-off formation, stuck pipe incidents, and drilling fluid losses. A technology aimed at ensuring successful and high-quality trouble-free well drilling is analyzed and recommended. Based on data obtained from the Surkhandarya Basin fields, many wells were not drilled to the designed depth. Geophysical data from studied fields indicate that pore pressure retained in clay formations causes wellbore instability. These data also help to identify zones prone to collapse; however, the direct measurement of pore pressure in such formations remains impossible. This research was primarily conducted in the Ustyurt region, one …

Algorithms For Combined Regular Synthesis Of Controller Parameters In Control Systems For Dynamic Objects, Khusan Zakirovich Igamberdiev, Latafat Abbas Gizi Gardashova, Yulduz Mukhtarkhodjayevna Abdurakhmanova, Uktam Farkhodovich Mamirov

Technical science and innovation

Nonlinear control system that includes m-dimensional input control signal and extended (n+s) - dimensional state vector, the last s components of which form a vector of unknown parameters θ satisfying a general difference equation is being considered. The quality criterion is determined by the loss function. The optimal control must satisfy the Bellman equation with respect to the optimal loss function. To be defined an approximate solution that preserves an active use of information. For this purpose, the system is linearized in accordance to the nominal trajectory. This problem is seen as incorrectly stated. The values of the preliminary data …

Technological Schemes For Recycling Used Mineral Oils Carbon-Based Adsorbents Derived From Petroleum Coke, Jaloliddin Sharafiddinovich Bakhtiyorov, Vais Narzullaevich Juraev, Mirzhalol Nuriddinovich Norpulatov

Technical science and innovation

Currently, the demand for mineral oils used in engine vehicles and transformers is increasing year by year worldwide. Additionally, a significant portion of used oils is burned as fuel. At present, the contact method is widely used for oil regeneration with the help of adsorbents such as aluminosilicates, zeolites, silica gels, bleaching clays, and others. The existing industrial reprocessing technologies are of great importance in the recycling of used engine and transformer oils. Furthermore, scientists worldwide are conducting research to create long-lasting carbon-based adsorbents for the regeneration of used engine and transformer mineral oils. In this regard, special attention is …

Improving The Methodology Of Complex Organization Of Rural Areas Based On Gis Technologies, Anvarjon Pardaboyev

Technical science and innovation

In the world, scientific research is being conducted aimed at improving the efficiency of complex organization of rural areas by utilizing modern geographic information systems (GIS) and remote sensing data. These studies focus on shaping the land allocated to these areas, organizing their activities, and forming the basis of cartographic information. Additionally, the use of modern GIS and remote sensing data has become widespread in the complex organization of rural areas in many countries. This method stands out for its effectiveness in organizing regions today.

In our republic, comprehensive measures are being implemented to consistently develop production through structural, institutional, …

Training Stages And Algorithms Of Multilayer Neural Networks For The Control System, Abdishukurov Maqsudovich Shavkat, Xuecheng Li

Technical science and innovation

The application of neural network technologies in control systems consists of several stages. In technological object control systems, each layer of the multilayer perceptron neural networks is represented using separate transfer functions. The result of synthesizing neural network technology into control systems allows for the rapid solution of many problems. Using neural network technology, it is possible to perform many calculations. Chain rules of neural networks are added this paper. Lots of training algorithms are compared to choose better to train network. Backpropagation neural networks is seen deeply in the last page. Problems of interpolation and extrapolation are solved. Algorithms …

Research Into Technological Features In The Curring Process Of Multilayer Polymer Composite Parts, Umidbek Dilshod Ugli Kosimov, Jonibek Kobilovich Tokhirov, Andrey Dmitrievich Novikov

Technical science and innovation

This paper examines the main technologies and mechanisms used in the curing process of multilayer thick-walled parts of unmanned aerial vehicles (UAVs) made of polymer composite materials (PCM) based on epoxy resin. The study provides a detailed analysis of the technological features of the curing process, its kinetics, and the influence of heat transfer mechanisms on the final quality of molded components. It is emphasized that due to the low thermal conductivity of PCM, temperature inhomogeneity may occur during curing, leading to defects, internal stresses, and deterioration of the mechanical properties of the product. Therefore, ensuring uniform temperature distribution throughout …

Comparative Analysis Of Gas And Mechanical Emissions From Electric Cars And Internal Combustion Engine Vehicles, Bakhtiyor Akhmatjonovich Kosimov

Technical science and innovation

This article analyzes the environmental impact of modern cars, in particular the amount of harmful substances emitted into the environment by electric cars and internal combustion engine cars, and provides scientific information on the substances that are released from cars in the form of not only gaseous emissions, but also dust particles generated by the mechanical wear of the brake system and tires. At the same time, this article also takes a scientific approach to the wear rates of brake pads and tires, their impact on environmental safety, and the level of dispersion of the microdust generated. Comparative tables have …

Development Of An Experimental Stand For The Study Of The Directions Of Movement And Velocity Of Air Flows In The Pneumatic Channel Of The Final Aspiration Of The Muz-16 Air Sieve Separator, Alexey Igorevich Ermakov, Alexey Alexandrovich Yazenkov, Sergey Anatolyevich Zelenko, Zulfiya Kakhramonovna Ergasheva

Technical science and innovation

The article describes the principle of operation of the MUZ-16 air-sieve separator produced by CJSC Borisov Plant Metalist, intended for preliminary, primary and secondary purification of grain and seeds of cereals, legumes, cereal crops and rapeseed. The results of a study of the directions of air flow in the MUZ-16 aspiration system and the efficiency of purifying buckwheat from impurities that differ in aerodynamic properties are presented. It has been established that the part of the MUZ-16 aspiration system, responsible for preliminary aspiration, works effectively, while the part of the system responsible for the final aspiration of the grain mixture …

Intelligent Control Of Reducing Energy Consumption And Water Loss In Smart Home Systems, Hakimjon Nasriddinovich Zaynidinov, Damira Farxodovna Hodjaeva, Dhananjay Singh

Technical science and innovation

The article presents an innovative approach to developing an intelligent control system for managing temperature and water level in smart home systems. The proposed method integrates an adaptive PID controller with fuzzy logic algorithms, enabling dynamic adjustment of the PID controller coefficients in real time. The mathematical model of the system incorporates heat balance equations, differential heat transfer relations, and nonlinear models of fluid loss. The adaptive control algorithms developed within the study allow the system to effectively respond to changes in input data.

A comprehensive analysis of the membership functions is conducted, along with adaptive tuning of the PID …

Technical And Economic Justification Of The New Design Of A Hydro-Accumulation Syste, Kurbon Salikhdjanovich Dzhuraev, Abdurasul Sayfutdinov, Elyor Doniyorovich Ismoilov

Technical science and innovation

The effective utilization of renewable energy sources such as solar and wind requires reliable and efficient energy storage systems due to their irregular and intermittent supply. This paper presents a novel hydro-accumulation system that significantly reduces energy consumption by integrating hydraulic ram pumps instead of traditional electrically powered pumps. The proposed system operates in cascade mode, where the kinetic energy of water is used multiple times through a sequence of hydraulic rams to pump water from a lower reservoir back to the upper one. Each stage of the system reuses the outflow water of the previous ram, achieving up to …

An Approach To The Mesostructure Sealing In Coal By Mine Water Clathrate, Haiyang Yi, Ze Li, Tao Yang, Zhuang Zhuo, Tingxiang Chu, Xianfeng Shi, Guang Xu

Mining Engineering Faculty Research & Creative Works

The sealing performance of coal mass is of significant importance for converting abandoned mines into geological repository. This study presents a novel approach to enhancing the sealing of the pore structure in coal seams, such a technique utilizes mined water as the primary substance and additive solution based crystalline. Sequent tests are implemented, including saturation test, ion chromatography test, permeability test and scanning electronic microscope observations. It was suggested that the produced crystalline decrease the porosity and permeability of the coal, with different crystal morphologies due to various ions of additive solutions. The produced rod-shaped crystals have the most remarkable …

Leveraging Oxygen Mobility With Zirconia In Low-Temperature Plasma For Enhanced Methane Reforming To Syngas, Fnu Gorky, Levy Pile, Grace Jones, Apolo Nambo, Mourad Benamara, Maria L. Carreon

Chemical Engineering Faculty Publications and Presentations

Despite extensive efforts to optimize the single-step production of syngas, hydrocarbons, and oxygenates via plasma catalysis, several challenges remain unresolved. In particular, understanding the various reaction pathways is hindered by the complexity of the reactions and the diverse range of chemical products formed. In this study, our main objective is to evaluate and compare the influence of zirconia on reaction pathways, methane (CH4) and carbon dioxide (CO2) conversions (%), and syngas selectivity (%) relative to the plasma-only route. Experiments were conducted at a low radio-frequency plasma power of 50 Watts without external heating. The results demonstrated significantly enhanced conversions of …

Investigating Vacuum Insulator Flashover Resistance Of Rexolite And Acrylic Before And After Applying Novel Insulator Cleaning Techniques, Ritin Joseph

Electrical and Computer Engineering ETDs

Pulsed power involves accumulating large amounts of electrical energy and releasing it instantaneously. Large pulsed power accelerators use a vacuum insulator stack to facilitate power transfer from the liquid to vacuum section. Limiting the probability of surface flashover in this setting to acceptable levels improves machine longevity and prevents energy loss. Post-shot debris deposition requires a refurbishment process to prevent deterioration of dielectric performance, though the current technique of hand-sanding is long, labor-intensive, and pose serious health hazards. I have collected flashover data on frustrum-shaped Acrylic and C-Lec Rexolite® (cross-linked polystyrene) samples using a 500-kV, 20-ns risetime pulsed power test …

A Comprehensive Review Of Software Requirements Dependencies Analysis Techniques, Nahla Mohamed, Sherif Mazen, Waleed Helmy

Iraqi Journal for Computer Science and Mathematics

The software Requirements Prioritization (RP) process is essential for producing a successful software project. Requirements are interdependent in software projects, so handling their dependency during the RP process is mandatory. Many researchers have shown that requirements dependency is challenging for large-scale systems. Extracting requirements dependency is difficult since requirements are documented in natural language. Improper handling of dependencies among requirements while prioritization can cause inaccurate prioritization results and deadlocks, which cause project delays, rework, and redesign. Many techniques have been introduced to automate the dependency analysis process among software requirements, including artificial intelligence (AI) and other logic-based methods such as …

Modeling Framework To Quantify And Gauge Project Cost Risks Due To Construction Material Price Volatilities Using Predictive Probabilistic Deep-Learning Algorithms And Stochastic Risk Modeling, Yasser Jezzini, Rayan H. Assaad, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Material price fluctuations pose significant challenges for executing construction projects and adhering to budgetary estimates. Existing research studies focused on forecasting construction material prices rather than quantifying and gauging overall project cost risks related to price volatilities, and they relied on traditional time-series forecasting methods that are incapable of offering full probabilistic distributions of price fluctuations and of providing a comprehensive assessment of risk uncertainties associated with material price fluctuations. This paper addresses these gaps by developing an integrated framework to quantify and gauge project risks due to construction material price volatilities. The framework's validity and practicality were demonstrated using …

Characterization Of The Effects Of Waste Mullite Powder On Seawater Sea Sand Cementitious Materials, Xiao Sun, Zehui Zhou, Wenjie He, Yudong Bi, Yao Wang, Hengrui Liu, Rui Zhong, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Maintaining the durability of coastal concrete structures while reducing construction costs remains a formidable challenge. Drawing inspiration from the volcanic concrete used by ancient Greeks and Romans, this study explores the feasibility of using waste mullite powder (WMP) with a high alumina content in seawater sea sand concrete to conserve natural resources and enhance durability. The experimental results demonstrate that the incorporation of seawater and WMP exerts detrimental impacts on the flow characteristics and workability of cementitious composites. While the sulfate content in seawater and sea sand can bolster the early strength of sea sand seawater concrete, sulfate attack compromises …

Geophysical Tools For Agricultural Management: Trends, Challenges, And Opportunities, Sophia Becker, Trenton Franz, Yufeng Ge, Joe Luck, Derek M. Heeren

School of Natural Resources: Faculty Publications

Agrogeophysics is a convergence of proximal soil sensing and hydrogeophysics in which geophysical methods are used to describe soil patterns and dynamics that shape agronomic management (including precision agriculture). To fully realize its potential for optimizing agricultural production, current barriers and targets for future agrogeophysics research must be identified. In this review, we compare the trajectory of agrogeophysics within peer-reviewed literature, patents, and the US university extension literature and examine the current challenges and opportunities for supporting agricultural production and sustainability with agrogeophysical tools. We conducted a repeatable search of Web of Science and Scopus for seven geophysical methods (electromagnetic …

Nasa Design And Analysis Of Pegda Hydrogels For Microgreen Cultivation In Space, Kelly Wu, Gabriel Antigua, Artur Abramyan

Publications and Research

With the growth of the space economy worldwide, sustainable and soil-less food systems for long-duration space missions become increasingly important. In this study, Polyethylene Glycol Diacrylate (PEGDA) hydrogels were experimented with as a biocompatible medium in arugula microgreen growth without utilizing soil. Among the most considerable challenges was the fact that the plants' root growth exceeded the hydrogel capacity, which caused seedling dislodgment and starvation. To combat this, computer-aided design (CAD) was utilized to 3D print different mold designs to try and control root development further. The most promising of these designs were coil and tree-branch molds, promoting lateral or …

Sidesense: Robust Physiological Motion Detection Via Mmwave Joint Communication And Sensing Systems With Multiple Beams, Mohammed Shadman Ishrak, Jannatun Noor Sameera, Alvin Yang, Yanjun Pan, Yao Zheng, Olga Boric-Lubecke, Victor M. Lubecke

Electrical Engineering and Computer Science Faculty Publications and Presentations

A 28-GHz multibeam joint communication and sensing system called SideSense is presented, in which a line-of-sight (LoS) beam is used to maintain reliable communication, while other sensing beams are used to enhance physiological motion detection. SideSense decodes the motion frequency and shape from the channel state information (CSI) by first tuning the gain ratio and phase differences between the LoS communication beam and non-LoS (NLoS) beam to maximize the sensing signal-to-noise ratio (SSNR) without significantly degrading the communication channel capacity (CCC). Analytical results based on a bistatic model are presented to show a gain ratio of around 1 and a …

Data-Driven Prediction Of Binder Rheological Performance In Rap/Ras-Containing Asphalt Mixtures, Eslam Deef-Allah, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt recycling technologies have advanced considerably over the last few decades with the utilization of reclaimed asphalt pavements (RAP) and recycled asphalt shingles (RAS). Characterizing aged and heterogeneous binders in these mixtures is challenging, particularly with limited extracted binders. This study suggests a data-driven framework that considers the rheological, chemical, and thermal characteristics to predict the binders' performance. Ninety-seven mixtures with 0–35% of the asphalt binder replaced with RAP/RAS binders were included as cores from the field, plant-produced mixtures, and laboratory-fabricated mixtures. The binders were chemically quantified using aging, aromatic, and aliphatic indices. Thermal analyses of the binders involved the …

Redundant Functions Of Mir156-Targeted Squamosa Promoter Binding Protein-Like Transcription Factors In Promoting Cauline Leaf Identity, Darren Manuela, Liren Du, Qi Zhang, Yifei Liao, Tieqiang Hu, Jim P. Fouracre, Mingli Xu

Faculty Publications

No abstract provided.

Ultra-Low Dosages Of Novel Graphene Types Enhance The Rheological Properties And Buildability Of 3d Printed Binders, Sahil Surehali, Akshay Venkatachalam, Ranjith Divigalpitiya, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

The use of graphene as a high-performance concrete additive is attractive; but, its cost and concerns about production scalability and dispersion efficiency in concrete are impediments to widespread use. This study explores the impact of ultra-low dosages (≤0.02 % by mass of binder) of two novel graphene types—fractal graphene (FG) and reactive graphene (RG)—produced through a cost-effective, environmentally friendly, and scalable process, on the rheological properties of 3D-printable concrete. Both FG and RG significantly enhance the dynamic and static yield stresses and viscoelastic properties of the binder, with RG-modified mixtures exhibiting slightly more pronounced enhancements due to the presence of …

Ai Questions; "The Ai Tea", Sally Brown

Artificial Intelligence Exhibit

This section includes a series of questions related to AI and the exhibit content, as well as button designs by WVU students and Art in the Libraries committee members, a list of the exhibition sponsors, and information on the exhibition launch panel.