Digital Commons Network^™

Design And Development Of Evacuated Photovoltaic-Thermal Systems For Efficient Cogeneration Of Heat And Electricity, Behnam Roshanzadeh

Mechanical Engineering ETDs

In conventional PV systems, most of the solar energy is dissipated into the environment as heat. Accordingly, hybrid Photovoltaic-thermal systems have been developed to utilize the waste heat from PV cells for various thermal applications. However, most PVT systems suffer from low thermal performance compared to solar thermal collectors, as the absorber plate in PVT systems is partially or fully covered by PV cells. This dissertation focuses on improving the thermal performance of PVT systems by introducing the evacuated PVT systems.

An evacuated-tube PVT system was designed and simulated for domestic hot water supply. The evacuated-tube PVT system demonstrated 40% …

Analysis Of Heat Transfer And Pressure Drops Associated With Twisted Tube Heat Exchangers, Braden Foderaro

Nuclear Engineering ETDs

Several studies have been done on the effects of twisted tubes in heat exchangers, including the correlations that relate the flow parameters to the heat transfer and pressure drop experienced. These studies are new, with the earliest being performed in 1982. As such, there are many correlations covering only certain flow parameters and geometrical configurations such as the Reynolds number and modified Froude number.

This thesis attempts to cover flow regimes and tube geometries not yet studied and yield correlations. Data are gathered from heat exchangers featuring twisted tubes with water as the working fluid. It is noticed that the …

Irregularities In The Dynamics Of Large Networks: Cases On Social Networks And The Internet, Dheeman Saha, Abdullah Mueen, Shuang Luan, Afsah Anwar, Yangsun Hong

Computer Science ETDs

Dynamic networks capture evolving relationships among entities, and irregularities in their behavior often signal significant events. This dissertation investigates such irregularities across social and infrastructural networks. First, we analyze Twitter (prior to its rebranding to X) to characterize influencers, introducing a follower-overlap similarity measure that identifies micro-influencers beyond content-based methods.

We then examine election-related irregularities by comparing suspended and non-suspended accounts during the 2020 U.S. presidential election, revealing behavioral patterns linked to misinformation and coordinated manipulation.

Next, we develop an algorithm to infer post-specific diffusion networks, reconstructing who-saw-from-whom pathways for tweets at scale. This method uncovers structural differences in diffusion …

Recreating Fiber Recruitment With Fiber Recruitment Using Additive Manufacturing, Natalia D. Mciver

Biomedical Engineering ETDs

Injured ligaments are often repaired with tendon grafts which may over or under constrain the joint; there is a need for an artificial graft option with the mechanical properties of a native ligament. Crimped fibers within ligaments allow for recruitment which means the viscoelastic properties of stress relaxation and creep are not inversely related. A feasibility study using ACLs and large-scale crimp models to study viscoelasticity, led to an in-depth analysis of the scapholunate interosseous ligament. Using the Modified Kelvin spring-dashpot model, for describing viscoelasticity with a variable stiffness property (time dependent fiber recruitment), we defined the relationship between creep …

Design And Evaluation Of The Influence Of Mutual Induction On Microbial Electrolysis Cell Performance And Biogas Production, Ashley L. Blackwell

Civil Engineering ETDs

Microbial electrolysis cells (MECs) present a pathway for energy recovery in wastewater treatment by converting organic substrates into methane or hydrogen. Traditional MEC designs typically rely on physical electrode contacts and expensive materials, which restrict their scalability. This study introduces the first induction-based MEC that uses mutual inductance between an external copper wrap and an internal coil to generate a fluctuating electrical potential, removing the need for expensive electrodes. The induction-stimulated reactor showed faster total organic carbon removal and a higher CH4/CO2 ratio compared to a conventional anaerobic digester, indicating improved carbon-to-methane conversion, although total gas yield remained similar. Microbial …

A New Model For Predicting Two-Zone Parameters Based On Geometric Modifications In Computational Fluid Dynamics Simulations, Jason B. Metten

Theses and Dissertations

This study uses Computational Fluid Dynamics (CFD) to create a new and improved model for key Two-Zone modeling parameters, 𝜒 and 𝛿2𝑝. It explores how geometric changes to centrifugal compressors impact these modeling parameters. While centrifugal impellers are an important part of many systems, the flow through such impellers is inherently complex, making performance often difficult to predict. There are many approaches for modeling this complex flow environment, one method being the Two-Zone model developed by Dave Japikse. Values for 𝜒 and 𝛿2𝑝 are often determined from data obtained from test rigs or correlations. In this study high-fidelity CFD simulations …

Electrochemical Detection Of No And Ca2+ During Cold Atmospheric Plasma Treatment Of Acute Wounds: Sensor Selectivity And Stability In The Plasma-Bio-System, Jonathan E. Thomas, Kristina Pattison, Suneel Kumar, Gagana Karkada, Duncan Trosan, Aunic Goodin, Jason Rainone, Dnyaneshwari Rananavare, Vandana Miller, Francois Berthiaume, Katharina Stapelmann

Kimmel Cancer Center Faculty Papers

Cold atmospheric plasmas (CAP) are a versatile tool in medical applications like wound healing. Its therapeutic benefits are partially attributed to the generation of biologically active reactive oxygen and nitrogen species (RONS). Characterization of RONS, however, typically only occurs after treatment. Here we report the first real-time in situ detection of CAP-generated nitric oxide (NO), and the simultaneous detection of cellular calcium ions (Ca²⁺) release using electrochemical sensors during CAP treatment of murine wounds. In vivo, NO rose rapidly within the first minute of CAP treatment but accumulated less overall than in PBS, reflecting reactions with wound-bed targets. In situ …

Exploring The Impact Of Incorporating Artificial Intelligence Integrated Systems In The Workplace, Catherine Cruz Agosto Noda

Theses and Dissertations

This study focuses on assessing the impact of incorporating systems integrated with in the workplace by assessing the constructs of usability, cognitive load, and trust. The constructs are assessed by generation and experience level to determine which factors are relevant in a workplace setting. A workplace scenario was simulated by asking participants to complete tasks where they assumed the role of a warehouse manager assigned with assessing two scheduling systems – one with artificial intelligence and one without artificial intelligence. The participants were presented with three tasks of increasing difficulty for each prototype. Both quantitative and qualitative measures were used …

Optimizing Military Fighter Jet Selection: A Decision Analysis Approach For Nuclear-Capable Aircraft, Eni Kelechi Ofong

Theses and Dissertations

This research investigates the strategic decision-making process involved in selecting a nuclear-capable fighter aircraft for NATO (North Atlantic Treaty Organization) nations in Europe. In adaptation to the continuously changing technology landscape and the necessity for enhanced deterrence capabilities, this study evaluates three potential aircraft: the legacy Panavia Tornado (PA-200), the widely deployed F-16 Fighting Falcon (F-16), and the advanced F-35 Lightning II (F-35). Each platform presents distinct advantages and limitations regarding operational performance, mission adaptability, cost-effectiveness, and long-term sustainability. To systematically assess these alternatives, the study employs various decision analysis frameworks, including Multi-Criteria Decision Analysis (MCDA), single dimensional value function …

Novel Experimental Techniques For Pressure Transients, Luliang Zhang

Theses and Dissertations

This dissertation introduces novel experimental techniques for analyzing pressure transients, focusing on dynamic strain and pressure measurements to advance the understanding and application of Pulse Pressure Amplification in percussive devices. The research evaluates a high-speed linescan extensometer utilizing linescan Digital Image Correlation (DIC) on a Kolsky Bar to obtain strain data at high strain rates. This data is critical for accurate material characterization and simulations to model dynamic behavior. Additionally, a novel method for measuring dynamic pressure waves in pipe systems has been developed, enabling direct assessments of pressure amplification in devices such as tapered pipe systems. The findings contribute …

Study On Vehicle-Pedestrian Interaction Autonomy By Risk Potential Theory, Riku Kikuta

Theses and Dissertations

Vehicle–pedestrian interaction is a critical aspect of autonomous vehicle (AV) development, as socially acceptable AVs must account for pedestrian intention and behavior. Risk Potential (RP) theory provides a framework to build human-like AVs by modeling expert driver risk perception, but conventional RP models treat pedestrians as static obstacles and neglect their dynamics. This dissertation extends RP theory by incorporating pedestrian velocity and orientation into three new models: the RP velocity model, the RP related-velocity model, and the RP Pedestrian Potential Position (PPP) model. These models were implemented in the Navigating All Terrains Using Robotic Exploration (NATURE) autonomy stack and tested …

Pria: Process Risk Identification And Analysis, Raymond Fasano

Nuclear Engineering ETDs

This dissertation proposes and evaluates two approaches, with-in a Process Risk and Analysis (PRIA) framework, that advance data-driven hazard discovery in complex cyber-physical systems. First, a transferability-based clustering method groups subspace-identified segments into operational modes, prioritizing cross-predictive performance over raw feature proximity. Second, a Neural Switching Linear Dynamical System (NeuralSLDS) model anchors learning in identified state-space models with Bayesian residuals, calibrated predictive uncertainty, and context-aware operating mode transitions. Together, these methods generate physics-informed, probabilistic world models that can support model-in-the-loop analysis of hazardous trajectories. The approach is validated on a simulated point-kinetics reactor and a centrifugal chiller dataset, demonstrating coherent …

Power Resilience In Utah's Water Sector: A Survey Of Stakeholder Practices, Preferences And Potential, Tyler Christopher Peterson

Theses and Dissertations

Drinking water and wastewater services are vulnerable to disruptions because they rely heavily on the electric grid. As a result, power outages can lead to water outages, creating cascading failures that compromise sanitation, firefighting, healthcare, and daily routines. Although an important topic, there are little to no studies of water and wastewater power resilience at a geographic or state level. In this study we investigate the extent of existing backup power and renewable energy integration as well as the motivations and barriers around their power resilience. We collect our data through semi-structured interviews with staff at 19 urban and rural …

Mechanical Quality Of Hemp Fiber As Influenced By Tillage, Cover Crop, And Nitrogen Management In Regenerative Organic Systems, Parinaz Heydar, Alyssa Pierce, Gabriella Fioravanti, Ronald Kander

School of Design and Engineering Papers

Industrial hemp (Cannabis sativa L.) is an emerging crop for renewable fiber materials. For farmers, finding a balance between agronomic performance and economic return is crucial, especially when targeting specific markets like the textile industry, which values not just fiber quantity, but overall quality. This field study, conducted at the Rodale Institute in Kutztown, Pennsylvania, assessed the effects of tillage (till vs. no till), cover crop (with cover vs. no cover), and nitrogen (N) rate (0, 50, 100, 150 kg ha⁻¹) on hemp fiber yield, N concentrations in leaf and stalk, and mechanical performance under regenerative organic conditions. Fiber mechanical …

Experimental And Theoretical Characterization Of Molten Salt Thermal Conductivity, Jacob C. Numbers

Theses and Dissertations

Molten salts form an ideal heat transfer fluid for advanced energy generation systems, including molten salt reactors (MSR). Accurate characterization of molten salt thermal conductivity is needed to confidently predict transient thermal behavior and optimize salt properties. Measurements are hindered by salts' challenging material properties, which---in the case of the needle probe device---induced unaccounted physical changes that limited its accuracy and repeatability. Sparse thermal conductivity data in general is exacerbated by a limited fundamental understanding of molecular energy transfer in liquids. This work extends the experimental capacity for compositional studies using the needle probe and proposes a theoretical model for …

Patent Searching With Uspto, Derwent Innovation And Lens.Org, Ibis Anette Moreno-Lozano

Day Family Research Lab Workshop Series

No abstract provided.

Tunable Phase-Change Metasurfaces Coupled With Mid-Infrared Molecular Vibrations, Haotian Tang, Liliana Stan, David A. Czaplewski, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Chiral optical meta surfaces have emerged as a promising platform in coupling with molecular vibrational fingerprints through the enhanced light-matter interaction under different circularly polarized light illumination. This work reports the mode coupling between the mid-infrared phonon vibrations of polymethyl methacrylate (PMMA) molecules, and the thermally tunable chiral meta surfaces based on the phase-change material Ge₂Sb₂Te₅ (GST-225). Phase-change chiral meta surfaces with high circular dichroism (CD) in absorption and tunable plasmonic resonance in the frequency range of 48-56 THz are demonstrated, which covers the phonon vibrational frequency of PMMA molecules at 52 THz. The mode splitting features are observed in …

A Review Of Bioactive Compounds Of Caesalpinia Sappan: Pre- And Post-Harvest Effect, Annisa Lugina Rachman, Santi Rosniawaty, Syariful Mubarok, Cucu Suherman, Yudithia Maxiselly

Jurnal Kultivasi

Sappanwood (Caesalpinia sappan L.) is a shrub or small tree that thrives in tropical regions and has been widely distributed across various areas. It has long been used as a natural dye in textiles, cosmetics, and herbal beverages due to its content of various bioactive compounds. This literature review discusses the secondary metabolites in sappanwood, their health benefits, and strategies to enhance product quality through pre-harvest and post-harvest treatments. This literature review was conducted by searching for relevant journals on Google Scholar using relevant keywords. Sappanwood contains diverse secondary metabolites, including flavonoids, phenolics, anthraquinones, triterpenoids, steroids, alkaloids, and tannins, with …

Workstation Redesign, Mclean Dowell, Anna Seville, Luz Corral Parra, Farah Talib

Senior Design Project For Engineers

Tellerex is a leading ATM refurbishing and repair company operating from Atlanta, Georgia. Due to its rapid growth, the company is facing challenges pertaining to their parts repair and refurbishing lab. Tellerex aims to fulfill orders by 4:00 pm on the day they are placed, guaranteeing their clients same-day shipping. Orders often build up throughout the day, causing lab technicians to stress, rush through orders, and lose organization.

Tellerex has requested our help regarding one of their repair/refurbishment labs. Our goal is to redesign the lab workspace through human ergonomics and Lean Six-Sigma principles. The company wants us to create …

Spike Timing Depended Plasticity Produces Unsupervised Learning Of Synergistic Muscle Feedback In A Synthetical Neural Network, Mark Allen Pupkiewicz

Dissertations and Theses

This study investigates how type Ia feedback from muscle spindles can be organized into groups representing agonistic muscle pairs through Spike Timing Dependent Plasticity (STDP). A single degree of freedom joint is actuated with four biologically modeled muscles forming two agonistic pairs. In order to emulate the sensory dynamics of biological muscle spindles, sensors in the model record the active length and velocity states of each muscle, the two primary factors eliciting type Ia afferent responses. In biological networks, synapses from Ia sensory neurons frequently activate interneurons representing agonistic muscle sources. This research investigates whether this organization can emerge in …

Engineered Multifunctional Drug-Loaded Dendrimer Nanoparticles For Glaucoma: Triple Mechanism Via Antioxidant Activity, Iron Chelation, And Enhanced Ocular Transport, Burhan Ates, Ashish Trital, Vimalin Jeyalatha Mani, Lei Xu, Jonathan Kenlee, Nuran Ercal, Hu Yang

Chemistry Faculty Research & Creative Works

In this study, we developed multifunctional nanoparticles based on polyamidoamine (PAMAM) dendrimers functionalized with caffeic acid (CA) and poly (ethylene glycol) maleimide (PEGM) for the topical delivery of hydrophobic antiglaucoma drugs brimonidine (BM) and betaxolol (BX). The PAMAM-CA and PAMAM-CA-PEGM conjugates exhibited antioxidant and iron-chelating activities in a dose-dependent manner. BM- and BX-loaded dendrimer nanoparticles produced using a multi-inlet vortex mixer showed uniform spherical morphology (∼80 nm by TEM) and hydrated sizes of ∼135-144 nm by DLS. Both nano formulations demonstrated high cytocompatibility with human corneal epithelial cells and were nonirritant in the HET-CAM assay, with PEGM further improving cytocompatibility. …

Engr 204 – Electrical Circuits Project Assignment: Exploring A Key Concept From The Textbook, Liubov Kreminska

Open Educational Resources

This assignment requires students to select a major concept from the ENGR 204 Electrical Circuits textbook and explore it through historical research, conceptual explanation, problem-solving, and real-world application. The project is structured to promote understanding through multiple means of representation, engagement, and expression, following Universal Design for Learning (UDL) principles. Students will describe the history and importance of the chosen concept, explain its main ideas using written or visual aids, solve representative and advanced problems related to the topic, and demonstrate how the concept appears in real-world engineering contexts. The submission must include clearly labeled sections, supporting visuals or simulations, …

Engr 204: 8-Week Op-Amp Major Project Series, Liubov Kreminska

Open Educational Resources

This submission outlines a collection of electronic design projects that can be completed within an 8-week timeframe, progressing from beginner-friendly circuits to advanced real-world applications involving op-amp design. Each project includes a week-by-week plan, required equipment, and key technical challenges. Through these projects, students gradually develop competence in signal processing, circuit stability, noise reduction, calibration, filter design, audio electronics, and bio-signal amplification. The structured timeline ensures systematic learning while allowing hands-on experimentation, troubleshooting, and refinement. The projects serve both as academic exercises and as practical foundations for more advanced electronic system design.

Iphone-Based Image Refocusing, Katie Jeong, Daniel Niu

Electrical and Systems Engineering Capstone Design Projects

In this project, we show that we can change the focus of a picture after we take it by using real optical physics instead of fake software blur. Modern phones try to create “portrait mode” effects, but those results are often not physically correct. Our approach uses multiple photos taken from slightly different positions to figure out the directions that light rays came from in the scene.

To collect the photos, we move an iPhone sideways on a slider in small, precise steps. Since we know exactly how far the phone moved for each picture, we can track how objects …

Strategies For Prolonging Ventricular Action Potential Duration Without Increasing Transmural Dispersion Of Repolarization, Candido Cabo

Publications and Research

Dispersion of repolarization results from a non-homogeneous recovery of excitability in cardiac tissue, and it is an important factor in arrhythmogenesis because it could lead to the initiation and maintenance of a variety of arrhythmias. Antiarrhythmic agents that prolong action potential duration (APD) by selectively blocking specific ion channels (like IKr) often increase dispersion of repolarization, which could result in a pro-arrhythmic risk. In this report, using computer models of the action potential of human epicardial, mid-myocardial, and endocardial myocytes, we have identified strategies to prolong APD without increasing transmural dispersion of repolarization. The first strategy, which involves blocking several …

An Innovative Hdm Model For Assessing Renewable Heat Energy Resources In Utility Energy Systems, Mark Alan Ryan

Dissertations and Theses

Renewable Heat Energy projects exhibit numerous unique, complex, and often conflicting characteristics, including varying project sizes, diverse energy resources, stakeholder demands, and significant challenges in energy conversion applications. Traditionally, cash flow analysis and return on investment are the most widely recognized metrics for evaluating remote energy projects. However, numerous quantitative and qualitative factors influence the overall performance and success of Renewable Heat Energy System (RHES) projects. A comprehensive approach using advanced tools is essential for assessing the factors and criteria that significantly impact these projects.

This research investigates the key quantitative and qualitative factors that contribute to the successful implementation …

A Predictive Model For Multi- Week Respiratory Risk From Red Tide On Florida’S Gulf Coast., Elmer S. Ochaeta

Computer Science and Engineering Faculty Publications

Florida’s Gulf Coast red tide (Karenia brevis) can put toxins into the air, making people cough, irritating the throat, and worsening asthma or other breathing problems especially when winds blow from the ocean toward the beach. Right now, most public updates don’t really help with the question people actually ask when planning a weekend or vacation: “Will going to or close to the beach be risky in the next few weeks?”.

In this project, I build a weekly early warning system that estimates respiratory risk for specific beaches and predicts that risk 2 to 4 weeks ahead. The study covers …

3d Printed Portable Automatic Pill Dispenser​, Amber M. Ocasio

Publications and Research

Medication adherence is a major public health concern, particularly among patients with chronic illnesses. Reports from the National Institutes of Health indicate that adherence rates are significantly lower for chronic conditions, with patients taking only ~50% of medications prescribed. Unintentional non-adherence—such as forgetting doses—is more prevalent (62.9%, 47.1%, 46.9%) than intentional non-adherence, and the consequences include medication waste, disease progression, reduced functional abilities, lower quality of life, and increased reliance on medical resources. Because existing automatic pill dispensers cost over $100 on average, they remain inaccessible for many lower-income patients who could benefit from such technology. This project addresses this …

Unsaturated Fatty Acid Oil-Based Microdroplets: A Promising Novel Class Of Microdroplets, Ramiz S. Alejilat

Seton Hall University Dissertations and Theses (ETDs)

Droplet-based microfluidics has rapidly advanced numerous fields, including chemistry, biology, materials science, medicine, food science, and cosmetics. In these systems, fluorocarbon oil combined with fluorinated surfactants is the preferred medium for fluid encapsulation, offering exceptional stability and biocompatibility essential for sensitive biological and chemical processes. However, growing concerns about the environmental and biological risks associated with fluorinated chemicals have prompted a search for alternatives.

This study is the first to explore the use of unsaturated fatty acids derived from emu oil for microdroplet formation. We characterized droplet formation based on flow rates and the presence non-fluorinated surfactant at a certain …

Fabrication And Evaluation Of Large Alumina Crucibles By Vat Photopolymerization Additive Manufacturing For High-Temperature Actinide Chemistry, R. Joey Griffiths, Christy Santoyo, Jean-Baptise Forien, Bradley Childs, Andrew J. Swift, Andrew Cho, Alexander Wilson-Heid, George Ankrah, Devin Rappleye, Aiden A. Martin, Jason Jeffries, Kiel Holliday

Faculty Publications

Additive manufacturing (AM) offers opportunities to advance the design and function of ceramic tooling in high temperature actinide pyrochemistry. In technical ceramics such as alumina, conventional forming techniques often restrict design flexibility and can limit experimental progress. In this study, we investigate the use of vat photopolymerization (VP) with commercial resins to fabricate large-scale alumina crucibles, reaching dimensions up to 125 mm, which is significantly larger than typically reported for dense VP ceramics. Notably, these additively manufactured components are produced using consumer-grade hardware, which limits process control, but offers significant upside in scalability and accessibility. Using microscopy and X-ray computed …