Digital Commons Network^™

Wind Effects Induced By Multivortex Tornadoes On A Low-Rise Building, Yi Zhao, Guirong Yan, Tetsuya Takemi, John Van De Lindt

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Multivortex tornadoes contain two or more subvortices that orbit within a parent vortex and can generate highly intermittent and localized near-ground wind fields. This study investigates how tornado flow structure affects wind effects on a low-rise building using large-eddy simulations. One single-vortex tornado and three multivortex tornadoes with different subvortex configurations are examined by systematically varying swirl ratio. Tornado translation is modeled using a relative-motion framework in which the building traverses the vortex field. Aerodynamic force and moment coefficients are evaluated along the traversing path. Additional stationary simulations are conducted to examine repeated load amplification associated with subvortex passages. Compared …

Reframing Soil Freezing As An Unsaturated Process, Antai Dong, Xiong Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Soil freezing and frost heave are inherently unsaturated soil phenomena. However, most existing numerical models are based on saturated soil mechanics or assume full saturation. This simplification introduces conceptual inconsistencies, requires modifications that violate fundamentals in soil mechanics and fluid mechanics, and often leads to the use of self-conflicting soil properties. To overcome these limitations, this study develops a physically consistent, fully coupled thermohydraulic model for soil freezing grounded in modern unsaturated soil mechanics. A soil freezing characteristic surface (SFCS) is introduced to represent unfrozen water content in partially frozen soils as a function of both suction and temperature. Recognizing …

Advancing Internationalization With Collaborative Online International Learning (Coil): A Systems Engineering Approach, Sharon Bommer, Olumuyiwa Asaolu, Paul Dagnall, Scott Segalewitz, Oluwatoyin Popoola, Esther Adeyemi

Journal of International Engineering Education

As globalization accelerates and engineering careers increasingly require international collaboration, engineering education programs must design courses and curricula to adequately prepare students for careers as engineers in modern industry. Collaborative Online International Learning (COIL) is a model of teaching and learning that supports the development of intercultural competence through a joint online learning environment. This paper presents a systems engineering approach of module development for an integrated COIL undergraduate course between a university in the United States and a university in Nigeria. The key objectives of this course are to increase students’ intercultural competence and to simulate global engineering management …

Underground Mine Tunnel Fire Dynamics: Experimental Investigation And Ai-Driven Characterization Of Flame Behavior, Jingmin Xu, Rui Tian, Ashish Kakoria, Aamir Iqbal, Tao Yang, Lina Zheng, Guang Xu

Mining Engineering Faculty Research & Creative Works

Underground mine tunnel fires pose serious threats to personnel safety and infrastructure integrity, yet their detection and characterization remain challenging due to complex ventilation environments and limited visibility. This study combines full-scale fire experiments with advanced computer vision analysis to investigate the influence of fire size and ventilation on thermal, chemical, and visual signatures of mine fires. Six full-scall controlled experiments were conducted using two fire pan sizes under three ventilation conditions. Fuel mass loss, temperature distribution, and gas concentrations were systematically recorded using thermocouples, gas sensors, and visual/thermal imaging. Results show that mass loss rate is primarily governed by …

Synthesis Of Bea Zeolite From Coal Fly Ash Nano-Silica Extract: Application In Co2 Adsorption, Alechine E. Ameh, Shabnam Feyziyeva, Jean Luc Mukaba, Keagan Pokpas, Baylar Zarbaliyev, Ojo O. Fatoba, Benoit Louis, Leslie F. Petrik, Oluwaseun O. Oyekola

Mining Engineering Faculty Research & Creative Works

This study demonstrates a circular economy approach to carbon dioxide sorption by re-purposing coal fly ash (CFA) into BEA zeolite using CFA-derived nano-silica and aluminum precursors via hydrothermal synthesis. The XRD patterns, with characteristic peaks at 15° and 37° 2θ, and SEM images both confirmed the complete transformation of the spherical-shaped CFA particles into amorphous nano-silica materials with particle sizes less than 100 nm. The absence of amorphous phases and the formation of high-intensity peaks at 7.8° and 22.8° 2θ further indicated the production of a highly crystalline BEA zeolite, obtained after hydrothermal synthesis durations between 10 and 72 h. …

Automated Guided Wave Characterization Of Marcelling: In-Plane Fiber Waviness In Thermoplastic Composites, Sourav Banerjee, Ana Tudor, Corey Leydig, Thomas Ferguson, Tally Bovender, Darun Barazanchy, Josh Widosky, Paul Ziehl

Faculty Publications

Thermoplastic composite (TPC) materials often develop in-plane fiber waviness during manufacturing, a defect known as marcelling. Marcelling negatively impacts the strength and overall performance of the composite and are hard to control. While it may appear as a surface imperfection, it can also extend partially through the thickness of the material. Currently, there is no established nondestructive evaluation (NDE) method to reliably detect and quantify marcelling in composites after manufacturing. As marcelling is not a local defect but spans across the surface in in-plane dimensions of the structure, traditional pulse-echo and phased-array ultrasonic NDE are ineffective. Automated multi-directional guided …

Thermal Conversion Of Cotton Gin Byproducts Into Liquid Fuels And High-Value Chemicals, Emmanuel Asare

Mechanical Engineering Theses

In this study, we performed fast pyrolysis, catalytic fast pyrolysis (CFP), and catalytic hydropyrolysis (CHP) of cotton gin byproducts (CGB) to investigate their conversion into hydrocarbon-rich liquid fuels and high-value aromatic chemicals. Five CGB fractions (CC1, CC2, SM, TM, and FCGB) were collected from different stages of cotton ginning operation and characterized by proximate, ultimate, and higher heating value (HHV) analysis. The feedstocks contained 41.5 44.8 wt.% carbon, 54.2–58.5 wt.% volatile matter, 6.0–15 wt.% ash, and higher heating values of 15.2–16.8 MJ kg⁻¹. All pyrolysis experiments were performed using a Pyroprobe 5200 coupled with GC-MS/FID, while catalyst loading, hydrogen pressure, …

A Transfer-Learning And Continuous Optimization-Based Framework For Predicting Heat Treatment-Dependent Mechanical Properties Of Ded-Processed Low-Alloy Steels, Atiqur Rahman, Sung Heng Wu, Ranjit Joy, Frank Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Directed energy deposition (DED) of low-alloy steels involves strongly coupled effects among alloy composition, solidification behavior, and post-deposition heat treatment, making mechanical property prediction difficult when target-domain data are limited. This study develops a transfer-learning and continuous optimization framework for predicting heat treatment-dependent yield strength (YS), ultimate tensile strength (UTS), hardness (HV), and as-solidified phase fractions of martensite, ferrite, and austenite in DED-processed low-alloy steels. A CALPHAD-based dataset was generated for 125 low-alloy steel compositions. A multilayer perceptron (MLP) surrogate was first trained as a baseline model, then fine-tuned through transfer learning and progressively updated as staged continuous optimization; the …

0905: American Car And Foundry (Acf) Collection, 1916-2019, Marshall University Special Collections

Guides to Manuscript Collections

The collection includes only documents that were found in the plant in 2021. These primarily consist of files on capital projects from the 1970s through the 1990s. Also included are notebooks with job descriptions and classifications; ledger books containing maintenance purchase orders; quality assurance manuals; visitors register books from 1973-2019; drawings of plant machinery and operations; slides and photographs; and miscellaneous materials.

The forerunner to ACF was Ensign Manufacturing Company, founded in 1871 at Huntington, West Virginia, by William H. Barnum and Ely Ensign, both from prominent families of Lime Rock, Connecticut. It was chartered (incorporated) on November 1, 1872, …

Impact Of Climate Change On Extreme Windstorms And Implications For Structural Design In The United States, Teng Wu, Reda Snaiki, Frank Lombardo, Sihan Li, Michele Barbato, Guirong Yan, Robert J. Trapp

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Climate change impacts various extreme windstorms associated with specific meteorological phenomena in different ways. Because various windstorms contribute to the design wind speeds, this study systematically reviewed the state-of-the-art understanding of climate change effects on wind events that collectively contribute to structural wind design in North America, particularly the US, including extratropical cyclones (as well as nor'easters), tropical cyclones, thunderstorms, and tornadoes. For each windstorm type, the general evidence of climate change impacts on storm activities (e.g., occurrence frequency and intensity) are summarized, followed by the introduction of existing simulation frameworks for yearly (or subyearly) maximum storm winds under changing …

Field Calibration Of Flow Over Tilting Weirs In Canals, Joseph E. Pugh, Timothy K. Gates, S. Karan Venayagamoorthy, Caner Kutlu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Tilting weirs are widely used to regulate water levels in open channel irrigation systems and can also provide flow measurement capability that helps optimize irrigation efficiency and ensure equitable water distribution. This case study demonstrates adaptation of lab-based tilting weir ratings to field settings, where flow behavior is more complex. We compile and analyze an extensive data set derived from independent studies of five structures within three canal systems, featuring both lined and unlined channels with discharge ranging from 0.35 to 15 m3/s (12 to 530 ft3/s). Results indicate that lab-based rating equations can be calibrated to account for site-specific …

Five-State Seismic Damage Classification Of Steel-Girder Bridges On Soft Soil Using Directional Intensity Measures And Multi-Parameter Damage Indices, Ibrahim Alomari, Woubishet Zewdu Taffese, Mohammad Hossein Afsharmovahed, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Rapid yet accurate post-earthquake damage assessment of highway bridges is essential to ensure transportation network resilience. Traditional inspection, fragility analysis, and finite element modeling are time-consuming or inaccurate for real-time decision-making. This study compares ten machine-learning classifiers for the seismic damage states of highway steel-girder bridges that incorporate directional intensity measures to represent the variance of ground motions. Based on the nonlinear time-history analyses of two Missouri bridges, one Michigan bridge, and one Wisconsin bridge, multi-parameter structural damage indices were proposed and mapped to five damage states from none to collapse. Among ten supervised algorithms studied, the artificial neural network …

Effect Of Rheology Modification On Fiber Orientation And Dispersion In 3d-Printed Ultra-High-Performance Concrete, Haodao Li, Alfred Addai-Nimoh, Seongho Han, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The extrusion process in 3D concrete printing (3DCP) facilitates horizontal alignment of steel fibers along the printing direction, thus enhancing the load-bearing capacity of printed elements. However, such shear-induced fiber alignment is highly sensitive to rheological properties. This study investigates how variations in dynamic yield stress (τd) and plastic viscosity (μ), influence the extrudability, fiber orientation and dispersion, and anisotropic mechanical behavior of ultra-high-performance concrete (UHPC). Five viscosity-modifying agent (VMA) types were incorporated at two content levels to modify the rheology of printable UHPC. Results showed that moderate VMA additions improved printability, whereas excessive contents markedly increased τd and μ; …

Barrier-Drainage Performance Of A Wicking Geotextile In Controlling Capillary Rise In Silt: Experimental Evaluation, Dahao Zou, Yipeng Guo, Jiejin Chen, Yafeng Li, Xiong Zhang, Yongjie Zhang, Luqiang Ding

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Capillary rise in silt significantly degrades its strength and durability, yet the hydraulic mechanisms governing moisture control using wicking geotextile in silt remain insufficiently understood. This study investigates the barrier-drainage performance of a wicking geotextile in silt through one-dimensional column experiments, supported by preliminary trials. Three configurations were examined: a control specimen without geotextile (CS), an embedded configuration (ES), and a surface-exposed configuration (SES). Volumetric moisture content and matric suction were monitored, capillary responses at the soil-geotextile interface and water storage behavior were evaluated. The results show that the wicking geotextile initially acts as a temporary capillary barrier due to …

Investigating The Impacts Of Information Framing And Representation On Multi-Stakeholder Decision-Making For Tradespace Exploration, Meredith G. Sutton

All Dissertations

Tradespace exploration (TSE) is a decision-making process used in engineering design to search through a tradespace, containing all potential solutions to a design problem and their performance evaluations, in order to select optimal or near-optimal solutions. Solution optimality is driven by a desire to maximize the overall utility of a solution, which often cannot be done without making tradeoffs or compromises. The TSE process requires vast amounts of information which can be difficult to generate and understand, often leading to challenges including information overload, delays in decision-making, and suboptimal decisions, even for the most experienced designers. To address the challenges …

Human-Centered Design Of Extended Reality For Learning Adoption, Effectiveness, And Collaborative Training Performance, Bhargav Upadhyay

All Dissertations

Extended reality (XR) technologies like virtual reality (VR) and augmented reality (AR) can be used for technical training to help students learn and practice complex tasks in a safe digital environment. Despite known benefits evidence is required to explore the effectiveness of these technologies to support student learning outcomes. Furthermore, technical training programs need evidence about when these tools improve learning, what are the barriers to adoption of these technologies, and how training should be designed by leveraging these technologies. This dissertation examined how XR technologies can support higher education and workforce training, specifically focusing on barriers and facilitators to …

Asm And A Culture Of Sharing, Caring, And Fun In Education, David J. Westenberg

Biological Sciences Faculty Research & Creative Works

One doesn't always equate a professional scientific society with sharing, caring, and fun, but in this age of public distrust, public engagement with science and active student learning are ways to regain trust. ASM holds a leadership position in promoting and recognizing the value of education in the future of our profession and is there to support your educational journey. From K12 outreach and public engagement, to professional development, to presenting and publishing scholarship of teaching and learning, ASM has been at the forefront of biology education. Under the leadership of visionary directors such as Amy Chang and now Irene …

Ai-Assisted Import Of Static Requirements Documents Into Sysml Models Using A Vibe-Coded Plugin Approach, Joshua Larson

Open Access Theses & Dissertations

Model-based systems engineering (MBSE) promises a single authoritative model in place of static documents, but the translation of requirements documents into that model remains manual, slow, and dependent on scarce modeling expertise. This thesis asks whether an AI-assisted workflow can automate that translation, and whether the tooling itself can be built by vibe coding, in which a practitioner directs an AI in natural language rather than writing code directly. The result is a plugin for Magic Systems of Systems Architect (MSoSA) 2022x that reads a PDF requirements document, extracts requirements through the Anthropic Claude API, and generates a SysML model …

Constructing Female High School Students’ Stem Self-Efficacy: The Role Of High School Stem Research Experiences, Hyunjin Son

Dissertations

In the U.S., nearly a quarter of the workforce is employed in Science, Technology, Engineering, and Mathematics (STEM) occupations. However, the STEM workforce lacks diversity, limiting perspectives to address real-world problems facing society. While many factors influence decisions to pursue STEM majors in college and enter the STEM workforce, one factor commonly associated with performance and persistence in STEM is STEM self-efficacy. Independent research experiences have been shown to increase conceptual understanding and confidence in STEM, leading to STEM degrees and careers. As high school co-curricular STEM research opportunities become more common, the effects of such experiences on students’ STEM …

Laponite Nanosilicate As A Platform For Antigen–Adjuvant Co-Delivery In Vaccination, Haoyu Qi

McKelvey School of Engineering Graduate Student Theses & Dissertations

Nanosilicates are two-dimensional, charged nanomaterials with tunable surface chemistry that enable electrostatic interactions with proteins and nucleic acids. These properties make Laponite nanosilicate a promising platform for vaccine delivery, where coordinated antigen–adjuvant presentation and lymph node delivery are important for shaping immune responses. This thesis investigated nanosilicates as scaffolds for lysozyme-based antigen delivery and co-delivery with CpG.

The preparation method reduced the apparent size of the NS–Lys–CpG complex at pH 10, although neutralization to pH 7 promoted larger aggregate formation. In vivo IVIS imaging after footpad injection showed persistent Cy7-associated fluorescence at the injection site for up to three weeks …

Enhancing Stem Education With Modeling, Simulation, And Ai Technologies: From Virtual Laboratories To Intelligent Teaching Assistants, Yiyang Li

Electrical & Computer Engineering Theses & Dissertations

Rapid advancements in modeling and simulation (M&S) and artificial intelligence (AI) present new opportunities to enhance various aspects of STEM education, from virtual laboratories that simulate physical lab environments in software to intelligent teaching assistants that provide on-demand, curriculum-aligned instructional support. Virtual laboratories offer a potential solution to the access and scalability challenges of laboratory courses by allowing students to conduct experiments without physical equipment or geographical constraints. AI-powered teaching assistants, particularly those grounded in course-specific materials, can help mitigate the instructional support gap that arises when students work independently in digital learning environments. This dissertation presents three-phase research into …

Validation Of A Portable Electrochemical Sensor For Real-Time Soil Nitrate Monitoring In Cotton Rhizosphere, Mohammad Solaiman, Elvis D. Sangmen, Ali Reza Galib, Tushar C. Sarker, Anil C. Somenahally, Shawana Tabassum

Electrical Engineering Faculty Publications and Presentations

Soil nitrate (NO3) exhibits rapid spatial and temporal variability that conventional point-sampling methods cannot effectively capture, limiting timely nutrient management and plant stress detection. This study aimed to validate a low-cost, threedimensional- printed electrochemical NO3 sensor for continuous in-soil monitoring and to evaluate whether sensor-derived NO3 dynamics reflect plant physiological responses. For this purpose, cotton (Gossypium hirsutum L.) plants were grown in pots under greenhouse conditions. The sensor was evaluated in two sequential phases: an initial calibration phase to characterize sensor response across a broad NO3 concentration range, followed by a validation phase in the cotton plant rhizosphere. In the …

Genwriter 2.0: A Hybrid Case-Based And Llm Rewriting Approach For Mitigating Implicit Gender Cues In Text, Shweta Soundararajan, Sarah Jane Delany

Conference papers

Gendered language is the use of words or phrases that indicate an individual's gender. Although useful in some contexts, gendered language can reinforce gender stereotypes and introduce bias, particularly in machine learning models for tasks involving people such as recruitment or occupation classification. When textual content about individuals, such as biographies, contain gender cues, models can learn spurious associations between gender and other characteristics of individuals, such as profession, potentially resulting in unfair outcomes such as reduced hiring opportunities for women.

To address this challenge, we propose GenWriter 2.0, a hybrid approach that integrates Case-Based Reasoning (CBR) with Large …

Radiation Testing And Failure Analysis Of A Complex Heterogeneous Soc, Garrett Smith

Theses and Dissertations

Heterogeneous System on Chips (SoCs) provide a robust platform that can flexibly handle different applications. Their small form factor and low power consumption for their performance have made SoCs an attractive option for space applications. However, SoCs are sensitive to the ionizing radiation found in space. We need to understand how an SoC will behave in the high radiation found in space. This requires us to perform radiation testing of the SoCs on Earth to understand their behavior. The radiation testing and analysis of a heterogeneous SoC is complex as it contains multiple different processing cores, memories, and other system …

Systematic Review Of The Institutionalization Of Service Learning In Higher Education, Wilmer Hernan Cruz Gutierrez

ASEAN Journal of Community Engagement

An increasing number of universities are integrating service-learning (SL) to fulfill their social mission. However, sustainable institutionalization of SL remains a persistent challenge. This study identifies and analyzes the factors, actors, and strategies that drive and inhibit SL institutionalization in higher education. Using the PRISMA 2020 guidelines, a systematic literature review analyzed 52 documents from seven academic databases (including WoS, Scopus, and ERIC). The findings were grouped into three sections: cultural (integration into institutional values/missions), process (articulation within teaching, research, and outreach), and structural dimensions (dedicated support entities). The results obtained reveal a reciprocal relationship where cultural alignment enables processual …

Enhanced Transdermal Immunization Via Solid-In-Oil Nanodispersions Incorporating Dendritic Cell-Targeting Peptide, Md Samiul Islam, Md. Shahin Ekka Sarker, Yoshirou Kawaguchi, Rie Wakabayashi, Noriho Kamiya, Muhammad Moniruzzaman, Masahiro Goto

Publications and Research

Transdermal immunization represents a promising needle-free alternative to conventional vaccination. However, efficient antigen delivery and robust immune activation remain major challenges. In this study, a solid-in-oil (S/O) nanodispersion system comprising a dendritic cell-targeting peptide (HR8), ovalbumin (OVA), and an adjuvant was developed for transdermal immunization. The HR8 peptide along with OVA was successfully incorporated into an S/O nanodispersion with an optimal hydrodynamic diameter of particles (< 200 nm) and exhibited stable physical properties for up to 90 days. In vitro and in vivo studies demonstrated enhanced antigen delivery with insignificant skin irritation in C57BL/6N mice. Moreover, in vivo transdermal immunization studies demonstrated that the addition of the HR8 peptide enhanced OVA-specific IgG responses (~1.5-fold). Notably, the HR8 peptide also promoted an approximately 2.5-fold increase in IgG2c levels, suggesting a shift toward a more T helper type 1-biased immune response, as reflected by an increased IgG2c/IgG1 ratio. Overall, these findings demonstrate that the incorporation of HR8 peptide into an S/O nanodispersion enables efficient transdermal antigen delivery and improved immunogenicity, highlighting its potential as a simple, non-invasive, and patient-friendly immunization strategy.

A Review About Preparation And Properties Of Biochar And Application Fields In The Environment, Marwa Al Rawi, Ghayda Al Kindi, Jwad Al Refaae

Engineering and Technology Journal

Biomass’ pyrolysis process is responsible for producing the biochar charcoal, this process does not incorporate the oxygen, and it is utilized as a soil enhancer for each one of the carbon sequestration, and soil health prospects. Biochar can be defined as a stabilized solid which is enriched with carbon and could remain in the soil for extended period of time. Biochar has been studied as a way of carbon sequestration, and it might be a way used for handling climate change and global warming. It happens due to the processes that are associated with pyrogenic carbon capturing and storages. This …

Utilization Of Satellite Images-Based Indices For Assessment Of Al-Hammar Marsh Restoration Plan, Bayda Dhaidan, Imzahim Alwan, Mahmoud Al-Khafaji

Engineering and Technology Journal

Wetland landscape characterization is an important component of determining the degree to which wetlands improve environmental conditions. The present study aims to create a model used to automated extraction of the land cover of the western part of the Al-Hammar Marsh south of Iraq, and then monitor the change in land cover overtime. A model builder in ArcGIS created based on a series of spectral-based indices included the Normalized Difference Vegetation Index (NDVI), the Normalized Difference Moisture Index (NDMI), and the Normalized Difference Water Index (NDWI), the OLI satellite images from 2013 to 2020, ENVI 5.3 and ArcGIS 10.4 were …

Wheelchair Movement Based On Convolution Neural Network, Maisaa Kodher, Jammila Saud, Hani Hassan

Engineering and Technology Journal

This paper intends to develop a methodology for helping amputees and crippled people old, by ongoing voice direction and association between patient and personal computer (PC) where these blends offer a promising response for helping the debilitated people. The major objective of this work is accurately detected audio orders via a microphone of an English language (go, stop, right and left) in a noisy environment by the proposed system. Thus, a patient that utilizes the proposed system can be controlling a wheelchair movement. The venture depends on preparing an off-line dataset of audio files are included 10000 orders and background …

Impact Of Distributed Generation On A Distribution Network Voltage Sags In Baghdad City, Ali H. Mohammed, Suad I. Shahl

Engineering and Technology Journal

Voltage sags are considered as one of the most detrimental power quality (PQ) disturbance due to their costly influence on sensitive loads. This paper investigates the voltage sag mitigation in distribution network following the occurrence of a fault. Two software are used in this work; the 1st is MATLAB R2017a for implementation of the Differential Evaluation (DE) algorithm to find the optimal location and size DG and while the 2nd software is CYME 7.1 for the distribution system modelling and analysis. The effectiveness of the proposed method is tested by implementing it on IEEE 33-bus system, and then it is …