Digital Commons Network^™

Hydrogen Permeation And Mechanical Behavior Of Hydrogen-Charged Cr-Coated And Oxidized Zr-Alloy Fuel Cladding, Daniel Cole Viands

Theses and Dissertations

Following the Fukushima nuclear accident in 2011, accident tolerant fuel (ATF) became a major research interest to enhance the safety of light water reactors. Because the current fleet of light water reactors and their associated fuel cycle infrastructure are well-established, developing ATF that does not significantly alter the current fuel form or change its supporting infrastructure is ideal. Cr-coated Zircaloy fuel cladding is therefore an excellent short-term solution to enhance accident tolerance. Thin layers of Cr-coating offer notable resistance to corrosion, high-temperature oxidation, physical wear, and hydrogen permeation. Cold spray (CS) and physical vapor deposition (PVD) are two well-established Cr-coating …

Saw Biosensor For The Detection Of Cyanobacteria And Cyanotoxin, Tally Bovender

Theses and Dissertations

The growing prevalence of cyanobacterial blooms and associated cyanotoxins, such as microcystin-LR (MC-LR), presents a significant threat to water quality and public health. Conventional detection methods, including ELISA and PCR, are often time-consuming, expensive, and require trained personnel, limiting their application in field settings. Hence, a miniaturized, quick testing sensor is proposed to circumvent the current sensing challenges for real time, in-situ diagnostics of MC-LR. The proposed high-frequency ultrasonic sensor employs surface acoustic waves (SAW). The sensor was designed using a multi-physics simulation tool to understand wave propagation in the piezoelectric substrate (lithium tantalate) and optimize the design of the …

Database Development For Reliable Small Object Detection In Maritime Environments, Jacob Matthew Whisenant

Theses and Dissertations

Achieving high reliability in small object detection is critical for advancing maritime and littoral intelligent navigation operations. Computer vision provides an undetectable form of perception that can be easily integrated into existing camera systems, offering a low-profile yet powerful solution for navigation and situational awareness in water-based environments. While deep learning techniques have significantly advanced the field of computer vision, the detection of small objects remains a persistent challenge. Limited pixel representation, the scarcity of large-scale small object datasets, and the reduced detail and indistinct features of small objects complicate detection efforts, especially in complex environments. These factors collectively hinder …

Optical And Thermal Characterization Of Vertically Conducting Β-Ga₂O₃ Diodes Grown On 4h-Sic Substrates For Short-Wavelength (<254 Nm) Detection, Muhammad Hassan Tahir

Theses and Dissertations

The advancement of compact, thermally stable, and efficient devices for deepultraviolet (DUV) detection below 254 nm is critical for solar-blind sensing, radiation monitoring, and high-power electronics. This thesis presents the growth, fabrication, and detailed optical and thermal characterization of vertically conducting β-gallium oxide (βGa₂O₃) Schottky barrier diodes (SBDs) grown on n-type 4H-Silicon Carbide (4H-SiC) substrates using metal-organic chemical vapor deposition (MOCVD).

β-Ga₂O₃ is an ultra-wide bandgap (UWBG) semiconductor (~4.8 eV) with intrinsic DUV transparency and high breakdown electric field, making it an ideal candidate for short-wavelength photodetection. However, its low thermal conductivity limits its vertical device performance. To overcome this, …

Effect Of Growth Conditions On The Performance Of Vertically Conducting Beta-Ga2o3 Diodes On 4h-Sic Substrate By Mocvd, Nifat Jahan Nipa

Theses and Dissertations

This thesis highlights the critical influence of doping strategies, specifically co-delta doping with silicon (Si) and indium (In), on improving the structural quality and device performance of β-Ga₂O₃-based Schottky barrier diodes (SBDs). To achieve better thermal management, β-Ga₂O₃ thin film was grown on bulk 4H-SiC substrates using the Metal-Organic Chemical Vapor Deposition (MOCVD) technique, renowned for its precise control over composition, thickness and doping profile. The ultra-wide bandgap (UWBG), high critical breakdown field and low turn-on resistance of β-Ga₂O₃ make it a strong candidate for next-generation power electronics and short-wavelength detection in extreme environments. However, the presence of structural defects …

Navigating Perceptions: How Organizational Type And Message Source Affect Willingness To Fly In Automated Air Taxis, Cody James Sweatt

Doctoral Dissertations and Master's Theses

A new era of transportation and business is beginning to emerge. Advanced air mobility (AAM), which uses highly automated aircraft that transport passengers and cargo in the underutilized, low-altitude airspace above and around urban areas, is rapidly becoming a reality (FAA, 2023). These new companies will utilize air taxis, which are automated, electric, vertical takeoff and landing (eVTOL) aircraft and will potentially foster a revolutionary new commerce infrastructure. Unfortunately, it is not currently understood how the credibility of a message source or specific type of organization that owns and operates an automated air taxi company influences a customer’s willingness to …

Building A Long Text Privacy Policy Corpus With Multi-Class Labels, David Stein, Florencia Marotta-Wurgler

Vanderbilt Law School Faculty Publications

Legal text poses distinctive challenges for natural language processing. The legal import of a term may depend on omissions, cross-references, or silence, Further, legal text is often susceptible to multiple valid, conflicting interpretations; as the saying goes: a good lawyer’s answer to any question is “it depends.”This work introduces a new, hand-coded dataset for the interpretation of privacy policies. It includes privacy policies from 149 firms, including materials incorporated by reference. The policies are annotated across 64 dimension that reflect the applicable legal rules and contested terms from EU and US privacy regulation and litigation. Our annotation methodology is designed …

Distributed Monitoring Of Moving Thermal Targets Using Unmanned Aerial Vehicles And Gaussian Mixture Models, Gustavo Vejarano, Yuanji Huang, Pavithra Sripathanallur Murali

Electrical and Computer Engineering Faculty Works

This paper contributes a two-step approach to monitor clusters of thermal targets on the ground using unmanned aerial vehicles (UAVs) and Gaussian mixture models (GMMs) in a distributed manner. The approach is tailored to networks of UAVs that establish a flying ad hoc network (FANET) and operate without central command. The first step is a monitoring algorithm that determines if the GMM corresponds to the current spatial distribution of clusters of thermal targets on the ground. UAVs make this determination using local data and a sequence of data exchanges with UAVs that are one-hop neighbors in the FANET. The second …

Mtu-Llm: Llm-Based Multi-Robot Task Allocation And Path Planning For Heterogeneous Robots In Search And Rescue Operations, Kaushik Kannan, Jungyun Bae

Michigan Tech Publications

Urban Search and Rescue operations after natural disasters involve locating and assisting victims in hazardous environments, which is challenging. Classical Multi-Robot Task Allocation (MRTA) and path planning approaches have been used to deploy heterogeneous robot teams in unsafe areas. However, existing methods often lack focus on workload balance and requirement fulfillment and struggle to generalize across different scenarios. To address these challenges, we propose Multi-robot Task allocation Utilizing LLMs (MTU-LLM), a framework designed to reduce the development time for task allocation and path planning approaches, enabling faster robot deployment. The framework uses an LLM-based “prompt engineering” approach that generates task …

Embeddable Multi-Material Wireless Micro-Sensors Utilizing Additive Manufacturing And Enhanced Microstructure, Nicholas Reed

Doctoral Dissertations and Master's Theses

The development of embeddable, multi-material wireless microsensors offers transformative potential for structural health monitoring (SHM) in aerospace applications. This work integrates additive manufacturing (AM) techniques with advanced microstructural design to produce flexible, high-resolution sensors that can be directly embedded into polymer substrates. By utilizing the vat photopolymerization process, customized embedded sensors are seamlessly integrated into polymer AM structures. These sensors are then continuously refined, targeting increases in performance, both internal and external. Microstructural enhancements are explored to modify the rheological properties of the fabricated embedded sensing channels and enhance the adhesive bonding between the embedded sensor and the AM structure. …

Mission Engineering Competencies Workshop Report: Roles, Responsibilities, And Skills, James D. Moreland, Jr. (Editor), Thomas Irwin, Robert-Allen Baker

Center for Mission Engineering (CME) Publications

This report summarizes the findings of a two-day Old Dominion University Mission Engineering Workshop involving the U.S. Navy, U.S. Marine Corps, U.S. Air Force, National Aeronautics and Space Administration, the University of New South Wales, and Old Dominion University, focused on defining the roles, competencies, and skills essential to Mission Engineering. It presents a structured competency framework and offers recommendations to guide workforce development, training, and cross-agency collaboration in support of complex, mission-driven systems.

Retraction: A Database Of Teleseismic Shear-Wave Splitting Measurements For The Ordos Block And Adjacent Areas(Seismological Research Letters (2022), 93, 5, (2731–2739), 10.1785/0220210310), Lin Liu, Stephen S. Gao, Kelly H. Liu, Tu Xue, Yan Jia, Sanzhong Li

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

An earlier version of this article (Liu et al., 2022) included private data from the Himalayan-III program which should not have been made public. The authors acknowledge and regret their negligence during the selection of the measurements. The impacted data represent only 2.7% of the total data published in this article, and after review, the authors and the editors agree that this unintentional error has no bearing on the work's scientific conclusions. Therefore, we are retracting the impacted data and have made corrections to remove any Himalayan-III program data from the article's text, figures, and supplemental tables.

Ftir Characterization Of Asphalt Sara Fractions In Response To Rubber Modification, Mohyeldin Ragab, Eslam Deef-Allah, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt–rubber binders (A-RBs) have a long and deep history of use; however, little is known regarding the interrelated chemical behaviors and miscibility of rubber with the asphalt fractions [saturates, aromatics, resins, and asphaltenes (SARA)]. This study comprehensively attempted to address this knowledge deficiency by employing Fourier transform infrared spectroscopy (FTIR) to investigate the chemical evolution of A-RBs. A-RB interacted at 190 °C and 3000 min⁻¹ for 8 h was deemed to have the optimal rheological performance. FTIR of the liquid fractions of A-RB 190–3000 showed a prominent chemical shift in the SARA fractions, with new peaks that showed rubber …

Investing Hysteresis In Floodplain Dynamics Of Lakes In The Middle St. Johns River Using Sentinel-1 Sar Imagery, Keenan Hubbard

Doctoral Dissertations and Master's Theses

Floodplain dynamics are often complex, with hysteresis potentially affecting the temporal relationship between flood stage and flood extent during subsequent inundation phases. This study leverages Sentinel-1 synthetic aperture radar (SAR) imagery to map flood extent in the Middle St. Johns River Lake floodplains and examine the presence of hysteresis during flood events. SAR scenes corresponding to river gauge readings were analyzed from the rising and falling limbs of a flood hydrograph. By comparing these flood maps, we assess differences in inundated areas at equivalent water levels during each stage of the flood event. The findings aim to enhance flood monitoring …

Characterization Of Lactobacilli-Containing Catheter Segments Developed By Using Selective Laser Sintered Mold., Caden Maners

Master of Engineering Theses

Catheter-associated urinary tract infections (CAUTIs) are a major healthcare burden with current prevention strategies offering limited success. This study presents a novel, self-coating biomaterial approach using a silicone-based bioink embedded with thermally sensitive probiotic strains (L. crispatus, L. rhamnosus, and L. reuteri). Catheter segments were fabricated via bio-injection molding using 3D-printed CAD molds. These Lactobacilli, selected for their probiotic and antimicrobial potential, serve as a non- antibiotic strategy to reduce infection risk. These segments were evaluated for mechanical strength (Shore A hardness), thermal stability (TGA/DSC), porosity and bacterial presence (SEM), biofilm formation (crystal-violet assay), as well as mass retention in …

Modeling Framework To Quantify And Gauge Project Cost Risks Due To Construction Material Price Volatilities Using Predictive Probabilistic Deep-Learning Algorithms And Stochastic Risk Modeling, Yasser Jezzini, Rayan H. Assaad, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Material price fluctuations pose significant challenges for executing construction projects and adhering to budgetary estimates. Existing research studies focused on forecasting construction material prices rather than quantifying and gauging overall project cost risks related to price volatilities, and they relied on traditional time-series forecasting methods that are incapable of offering full probabilistic distributions of price fluctuations and of providing a comprehensive assessment of risk uncertainties associated with material price fluctuations. This paper addresses these gaps by developing an integrated framework to quantify and gauge project risks due to construction material price volatilities. The framework's validity and practicality were demonstrated using …

Designing A Portable And Accessible Diffuse Reflectance Spectroscopy System For Real-Time Detection Of Cervical Intraepithelial Neoplasia, Allison Scarbrough, Diana Moses, Tongtong Lu, Bing Yu

Biomedical Engineering Faculty Research and Publications

Significance: Over 80% of cervical cancer cases occur in lower-to-middle income countries (LMIC’s). This is partly because current screening techniques lack affordability, accessibility, and/or reliability for use in LMIC’s.

Aim: To develop an optical technique for cervical cancer screening that is affordable, accessible, and reliable for use in LMIC’s.

Approach: We developed a portable diffuse reflectance spectroscopy (DRS) system, which costs < $2500 USD to manufacture, and employs a Raspberry Pi to extract the absorption (μ_a) and reduced scattering (μ'_s) coefficients of biological tissue. The system was subject to travel and intentional rough handling. It was further used to capture 320 DRS spectra taken from 64 tissue-mimicking phantoms. Two …

Analysis Of Vision Transformers And Domain Adaptation In Long-Range Facial Recognition, Zachary Michael Swanson

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Atmospheric turbulence presents a significant barrier to long-range facial recognition, introducing severe geometric distortions and blur that degrade image quality. This thesis investigates deep learning approaches for mitigating these effects, with a focus on transformer based architectures and domain adaptation strategies.

An in-depth benchmarking study was performed using convolutional neural networks (CNNs) and vision transformers (ViTs) on the Husker BRIAR Research Collection from up to 500m (HBRC-500) face dataset. The results demonstrated that vision transformers, particularly hierarchical vision transformers like the shifted-window (Swin) transformer, outperform CNN-based models at long distances due to their ability to model global spatial relationships and …

Advanced Study Of Nickel-Titanium Alloy: Effects Of Point Defects On Mechanical And Thermodynamic Properties, Diego Armando Juarez Rosales

Open Access Theses & Dissertations

High-throughput first-principles calculations of point defects are emerging as a powerful tool to accelerate materials discovery in applications [1]. Substitutional, antisite, and vacancy defects can play an important role in the mechanical and thermal properties of intermetallic alloys [2]. In this present work I compute the thermal and mechanical properties of shape-memory alloy nickel-titaniun (NiTi) in the B19â?? martensitic and B2 austenitic phases from molecular dynamics (MD), using a second nearest neighbor (2NN) modified embedded atom method (MEAM) [3] classical potential in the temperature range from 200K to 600K and composition range from 45 atomic percent to 55 atomic percent …

Identification Of Authentic Gnss Signals In Time-Differenced Carrier-Phase Measurements With A Software-Defined Radio Receiver, Zhen Zhu, Sanjeev Gunawardena, Eric Vinande, Jason Pontious

Faculty Publications

The time-differenced carrier phase can be computed from measurements recorded by a multi-global navigation satellite system software-defined radio receiver such as PyChips, from which the user displacement and receiver clock drift can be solved. PyChips is able to simultaneously track authentic and inauthentic signals in separate channels, which makes it possible to observe both types of measurements with corresponding navigation data. A random sample consensus algorithm has been introduced to assess the consistency between the measurements and data. This algorithm successfully separated authentic channels from inauthentic channels when they are broadcast simultaneously.

Decentralised Consensus Control Of Hybrid Synchronous Condenser And Grid-Forming Inverter Systems In Renewable-Dominated Low-Inertia Grids, Hamid Soleimani, Asma Aziz, S. M.Muslem Uddin, Mehrdad Ghahramani, Daryoush Habibi

Research outputs 2022 to 2026

The increasing penetration of renewable energy sources (RESs) has significantly altered the operational characteristics of modern power systems, resulting in reduced system inertia and fault current capacity. These developments introduce new challenges for maintaining frequency and voltage stability, particularly in low-inertia grids that are dominated by inverter-based resources (IBRs). This paper presents a hierarchical control framework that integrates synchronous condensers (SCs) and grid-forming (GFM) inverters through a leader–follower consensus control architecture to address these issues. In this approach, selected GFMs act as leaders to restore nominal voltage and frequency, while follower GFMs and SCs collaboratively share active and reactive power. …

Effect Of Expanded Perlite And Exfoliated Vermiculite Aggregate Additives On Water Vapor Permeability Performance Of Cement-Based Lightweight Mortars, Lütfullah Gündüz, Şevket Onur Kalkan

Journal of Sustainable Construction Materials and Technologies

Vapor diffusion is the movement of water vapor molecules through porous materials such as wood, insulation products, and lightweight wall elements due to differences in vapor pressure. Vapor retarders are used to control vapor diffusion through wall sections and surfaces. All building materials provide some resistance to vapor diffusion, and the amount of resistance varies depending on the material's properties. These properties can vary with relative humidity and moisture content, age, temperature, and other factors. Vapor resistance is usually expressed using the inverse term of ``vapor permeability,'' which is the relative ease of vapor diffusion through a material. Water vapor …

Development Of A Risk Management System For Public Works Projects In Developing Countries: A Case Study Of Lebanon, Olivia Kalakesh, Walid Shatila, Ali Hatoum

BAU Journal - Science and Technology

The complexity of construction projects and their dependence on a wide range of factors make the integration of risk management into project management essential for achieving successful project outcomes. This research aims to develop a risk management system for public works projects, primarily in Lebanon. To achieve this, the main risks affecting the Lebanese construction industry were investigated, and their impact on the “golden triangle” of time, cost, and quality was analyzed. A questionnaire survey was conducted with a randomly selected sample of 55 engineers working in the Lebanese construction market. The questionnaire included 52 risk factors categorized into seven …

Fedevd: A Federated Road Traffic Event Detector From Social Networks, Ahmad Traboulsi, May Itani, Layal Abu Daher, Ali Haidar

BAU Journal - Science and Technology

The increasing population and the corresponding rise in the number of vehicles, coupled with inadequate public transportation, is increasing the already existing traffic problem. One solution to this problem has been the implementation of Traffic Monitoring Systems (TMS). However, TMS deployment entails significant costs, including (1) the installation of hardware in key areas and (2) the employment of dedicated monitoring personnel. Simultaneously, Online Social Networks (OSNs) have become global platforms with rapidly growing user bases, leading to a surge in user engagement. This widespread participation has transformed social networks into invaluable sources of data for analytics, business intelligence, and decision …

Exponential Decay For The Truncated Version Of The Porous-Elastic Model, Dilberto Da Silva Almeida Júnior, Baowei Feng, Luiz Gutemberg Miranda

BAU Journal - Science and Technology

This paper investigates the one-dimensional truncated version of the porous-elastic system that avoids the damaging con sequences associated with the second frequency spectrum. We consider a feedback law acting on the displacement of the elastic solid and establish well-posedness via the Faedo-Galerkin method. Furthermore, we prove an exponential energy decay result that holds independently of any specific relationship between the system’s coefficients, using the energy perturbation method.

Feedback Parameters For A Closed-Loop Multiple-Input Multiple-Output Model Of The Upper Limb, Ian Syndergaard, Daniel B. Free, Dario Farina, Steven Knight Charles

Faculty Publications

Both closed-loop models and multi-input multi-output (MIMO) models of the neuromusculoskeletal system of the upper limb are important for simulating and understanding motor control. Yet no large-scale linear neuromusculoskeletal models of the upper limb that are both closed-loop and MIMO have been developed. The primary difficulty in creating such models is choosing appropriate feedback parameters (such as feedback gains and delays), as such a collection of parameters is not available in the literature. The purpose of this work is to 1) present a method for developing MIMO models of short-loop afferent feedback and 2) offer estimates of average feedback parameter …

Comprehensive Review Of Sensible Thermal Storage Systems For Cooking Applications, Anna K. Shariishoy

Tanzania Journal of Engineering and Technology (TJET)

This paper reviewed the sensible thermal storage systems specifically designed for cooking applications. The review focuses on the characteristics of storage materials, their practical applications, and the overall performance of the systems. The review consolidated an array of experimental and numerical research published across various sources such as journals, conferences, books, online resources, and professional reports. A systematic review is used to reach the conclusion of this paper. Significant findings from this study include the wide range of storage capacities attained from small-scale systems that can store ~1–5 MJ of energy for a single meal to bigger systems that can …

Mitigation Of Voltage Disturbances In Industrial Power Distribution Networks Using Dynamic Voltage Restorers, Aviti T. Mushi

Tanzania Journal of Engineering and Technology (TJET)

Most electrical and electronic equipment in industries require high-quality power to function efficiently. Nonetheless, voltage sags and swells are pressing concerns and prone to directly impact the economy of industrial customers. One such customer embattled with these problems is Mbeya Cement Company Limited (MCC) located in Mbeya, Tanzania. These issues mainly are caused by upstream faults and switching operations. One way to address these is by utilizing the voltage injection method, which employs a power device known as a dynamic voltage restorer (DVR). In this paper, the voltage sags and swells of balanced three-phase, unbalanced double-line and single-line to ground …

Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …

Wet Gas Metering Performance Using Conventional Flow Measurement Devices, Vitali Mwinyi

Tanzania Journal of Engineering and Technology (TJET)

The demand for and production of natural wet gas from wells has significantly risen in recent years. Although natural gas liquids hold substantial value in the oil and gas market, their presence in wet gas adversely affects gas metering, leading to overreading during measurement. A comprehensive study has been undertaken to formulate and enhance correlations for rectifying overreading in wet gas metering. Nevertheless, most current correlations are designed for horizontal configurations of traditional meters. Mitigating this constraint is crucial to consider the impact of gravity on pressure loss in vertically oriented systems. This study seeks to evaluate the efficacy of …