Digital Commons Network^™

Development Of A Handy Tool For The Selection Of Urban Stormwater Best Management Practices, Aaron T. Kenny

Civil & Environmental Engineering Theses & Dissertations

The City of Norfolk, Virginia faces substantial stormwater management challenges due to shallow groundwater, tidal influence, dense urban development, and limited right-of-way. These constraints limit the applicability of many Best Management Practices (BMPs) and require the early identification of feasible practices before detailed hydrologic modeling. This thesis introduces a decision-support tool that quickly and systematically identifies and prioritizes BMPs that are both feasible and well-suited to Norfolk’s Municipal Separate Storm Sewer System (MS4) program, streamlining early-stage selection and saving time and resources.

The tool implements a two-stage methodology. First, feasibility gates are applied using catalog attributes derived from the Virginia …

Effective Transfer Of Tumor Annotations From Hematoxylin And Eosin To Fluorescence Images Of Breast And Lung Tissues, Tianling Niu, Emi Ampo, Julie M. Jorns, Mollie Patton, Tongtong Lu, Dong Hye Ye, Tina Yen, Bing Yu

Biomedical Engineering Faculty Research and Publications

Significance: Accurate transfer of annotations from histological images to fluorescence images is essential in developing deep learning (DL)-based optical imaging systems for intraoperative assessment of tumor margins. Manual annotation is time-consuming, prone to interobserver variability, and impractical for large-scale datasets.

Aim: We present a semi-automated method that can effectively transfer tumor annotations from pathologist-annotated hematoxylin and eosin (H&E) images to fluorescence images captured using microscopy with ultraviolet surface excitation (MUSE). This method is not intended for intraoperative use but rather to facilitate the creation of annotated datasets for DL model development.

Approach: Our semi-automated method consists of nonrigid image registration, …

The Comparison Of Dixon–Mood And 1/Nf Methods For Fatigue Limit Estimation Of 17–4 Ph Stainless Steel (H900), Arthur Pallar Pallar

Masters Theses

This study compares two methods for estimating the fatigue limit of 17-4 PH stainless steel (H900): the Dixon–Mood staircase and Kujawski 1/Nf linear method. Tests were conducted on an MTS Acumen 3 kN system under axial tension–tension loading at R = 0.1 and 50 Hz, following the standard practice defined in ASTM E466-15. Flat specimens were fabricated by water-jet cutting and polished. Tensile tests verified mechanical properties consistent with published data for the H900 condition. Fifteen specimens tested by the staircase method yielded a mean fatigue limit of 1138 MPa. The 1/Nf analysis using four specimens produced 1159 MPa, 2 …

Design, Optimization, And Initial Results Of An Automatic Impedance Matching Network For Nitrogen Inductively Coupled Plasma, Logan Anthony Alvesteffer

Masters Theses

The electric propulsion industry is witnessing a strategic interest toward the utilization of molecular propellants as alternatives to noble gases due to increasing cost constraints and logistical requirements. This transition is hindered by a fundamental deficiency in the understanding of molecular plasma and radio frequency physics, including the excitation, dissociation, and ionization cross-sections, which mandates a reliance on computationally inefficient, empirically modified atomic thruster designs. Furthermore, current state-of-the-art electric propulsion devices, such as gridded ion thrusters and Hall effect thrusters, utilize an electrode (cathode) for ionization and are thus susceptible to chemical poisoning and material erosion, which is prevalent while …

Development Of Oxide And Oxynitride Thin Films For Advanced Optical Applications, Nathan Christopher Episcopo

Open Access Theses & Dissertations

To develop Ga2O3 and TiOₓNᵧ thin films for optical applications, the process–structure–properties relationship was investigated using a comprehensive set of characterization techniques to establish the atomic structure and composition of the films in relation to the deposition conditions. The results provide critical insights into how deposition parameters influence the atomic structure and composition during magnetron sputtering. Furthermore, the correlation between atomic structure and composition with the optical and electrical properties of the films was examined to determine how variations in these factors affect functional performance. Collectively, these findings offer the necessary information to target desirable optical properties for Ga2O3 and …

Calibration Of Low-Cost Pm2.5 Sensors Using Data Continuously Generated At A Reference Station In El Paso, Texas, Brenda Lizbeth Hernandez

Open Access Theses & Dissertations

Low-cost sensors (LCS) offer a cost-effective way to expand air-quality monitoring networks, but they require strong calibration methods to ensure reliable performance under changing environmental conditions. In this study, Clarity LCSs were co-located with a state reference monitor for 6 months to evaluate fixed-time (2-, 3-, 4-, and 6-week) and rolling (2- and 3-week) calibration approaches. A multivariate regression model using PM1, PM2.5, PM10, and relative humidity was used to generate calibration coefficients for a “base sensor.” Data from two additional sensors were normalized to the base unit using linear regression, and their calibration coefficients were applied across the network. …

Evaluating Large Language Models For Requirements Engineering And Verification: A Comparative Analysis Of Gpt-5 And Gemini 3 Pro, Guadalupe Nevarez

Open Access Theses & Dissertations

Large Language Models (LLMs) are increasingly viewed as viable tools for Systems Engineering, yet empirical data regarding their effectiveness in generating engineering-quality requirements remains limited. This thesis compares the performance of GPT-5 and Gemini 3 Pro in generating system functional requirements for the Miner Guardian Drone, a prototype UAV designed for minefield remediation. Both models were provided with identical prompts and tasked with producing 15 functional requirements. Two independent raters evaluated the outputs using a nine-dimensional quality rubric aligned with IEEE 29148 and INCOSE guidelines to ensure rigorous assessment. The difference between the models was analyzed using descriptive statistics and …

Decoupling Piezoelectric And Pyroelectric Effects In Anisotropic Polymer-Ceramic Lattices Produced Via Fused Filament Fabrication, Sofia Alexandra Perez

Open Access Theses & Dissertations

This thesis investigates how multi-material fused filament fabrication (FFF) can be used to engineer lattice structures that decouple piezoelectric and pyroelectric responses within a single polymer–ceramic composite. A hybrid ABS–BaTiO3/PLA lattice—referred to as the Hybrid PIZCAL—was designed to direct mechanical strain along the Z-axis while suppressing deformation in the transverse directions. After thermal poling, the lattice exhibited a 293% increase in Z-axis voltage sensitivity compared to a monolithic ABS–BaTiO3 cube and significantly reduced off-axis electromechanical output. Finite element simulations and directional compression testing confirmed that geometric anisotropy and material zoning produce strong, axis-selective piezoelectric behavior. The second part of this …

One Step Fabrication: Software-Automated Printed Circuits Via Multi-Material Additive Manufacturing, Gabriel Sanchez

Open Access Theses & Dissertations

As of now, the creation of 3D printed components faces many issues regarding stability, repeatability, and manual labor. Existing methods lack an integrated software framework that automates circuit generation while ensuring predictable behavior in printed geometries. In this work, circuits are modeled by leveraging distributed equations that reduce to lumped approximations when the printed geometry remains uniform. The system is implemented through a parametric, domain-specific programming workflow and evaluated across 100 Hz to 100 kHz to assess the accuracy of the predicted electrical values. Printed results were validated by empirical studies involving an RLC meter and by comparing both theoretical …

Development And Optimization Of A Deep Level Transient Spectroscopy System, Samuel Ruiz

Open Access Theses & Dissertations

Deep-level transient spectroscopy (DLTS) remains one of the most widely used techniques for identifying electrically active defects that affect leakage current, carrier lifetime, and overall reliability in semiconductor devices. Legacy boxcar or capacitance meter implementations, however, often struggle with limited signal-to-noise ratio, labor-intensive data collection, and poor adaptability across diverse material systems. This thesis presents the design and optimization of a semi-automated, lock-in-amplifier-based DLTS platform. By pairing a Zurich HF2LI with PID-controlled cryogenic sweeps, precision signal generation, and MATLAB driven acquisition and processing scripts, the system will (i) enhance SNR through phase-sensitive detection, programmable low pass filtering, and parasitics calibration; …

Qualitative Stereo Vision Using Distributed Extended Waltz Filtering, Ben Mathew

Theses and Dissertations

Stereo vision is a fundamental problem in computer vision, aimed at reconstructing three-dimensional scene structure from two or more two-dimensional images. Traditional stereo algorithms rely on quantitative disparity estimation, often constrained by calibration precision, lighting variations, and surface texture. In contrast, our proposed Qualitative Stereo Vision seeks to understand depth relationships and spatial configurations from multiple planar views through symbolic reasoning and constraint satisfaction, offering a more flexible and cognitively plausible approach to scene interpretation.

This dissertation presents a novel framework called Distributed Extended Waltz Filtering, designed to provide qualitative stereo vision, particularly in the presence of occlusions—a persistent challenge …

Surface Modification Of Local Natural Fibers Via Alkali Treatment For Improved Mechanical And Molecular Properties Of Bamboo Fiber, Pineapple Leaf Fiber, And Sisal Fiber, Jibril Maulana, Muhammad Ilman Nur Sasongko, Dewi Izzatus Tsamroh, Muchammad Yafis, Syekhan Maulana

Journal of Mechanical Engineering Science and Technology (JMEST)

A major development in materials science toward reinforcement materials in biopolymer composites has been caused by a worldwide trend toward sustainable manufacturing and the rise of the circular economy. However, their mechanical properties can often be affected by their hydrophilic properties, lack of surface compatibility, and their presence of molecular bonding, such as lignin and hemicellulose. Alkaline surface modification has been widely reported as an effective technique to increase structural stability and fibermatrix adhesion. This study evaluated the effects of alkalizing three types of local natural fibers—bamboo fiber (BF), pineapple leaf fiber (PALF), and sisal (SF)—with sodium hydroxide (NaOH) at …

Jhtdb-Wind: A Web-Accessible Large-Eddy Simulation Database Of A Wind Farm With Virtual Sensor Querying, Xiaowei Zhu, Shuolin Xiao, Ghanesh Narasimhan, Luia A. Martinez-Tossas, Michael Schnaubelt, Gerard Lemson, Hanxun Yao, Alexander S. Szalay, Dennice F. Gayme, Charles Meneveau

Mechanical and Materials Engineering Faculty Publications and Presentations

This paper introduces JHTDB-wind (https://turbulence.idies.jhu.edu/datasets/windfarms), a publicly accessible database containing large-eddy simulation (LES) data from wind farms. Building on the framework of the Johns Hopkins Turbulence Database (JHTDB), which hosts direct numerical and some large-eddy simulation datasets of canonical turbulent flows, JHTDB-wind stores the full space-time (4D) history of the flow and provides users the ability to access and query the data via a web-based virtual sensor interface. The initial dataset comprises LES results from a large wind farm with 6 X 10 turbines, modeled using a filtered actuator line method, under conventionally neutral atmospheric conditions. This data comprises one …

Cost Analysis For The Application Of Recycled Materials In Road Subgrade Layer: A Case Study In Egypt, Norhan Sayed Zayed, Anwar B. Badawy Abo-Sena, Tarek M. Attia, Alaa Ahmed

HBRC Journal

Egypt’s construction industry has lately experienced rapid growth, particularly for infrastructure and road projects. This expansion has exacerbated a pressing issue: the accumulation of Construction and Demolish Wastes (CDW). To tackle this challenge, there is a growing proposal to recycle CDW in construction projects. This research aims to assess the economic and environmental implications of integrating recycled materials into road subgrade layers, contrasting their benefits with those of natural materials. The research methodology involved a comprehensive analysis of subgrade material characteristics based on Egyptian code requirements. A comparative analysis was conducted to evaluate the economic and environmental impacts …

Investigating Affordability Of Eco Housing With Ceb And Clustered Urban Form, Mohammad Fahmy, Ayman Ibrahim, Omar Galal

HBRC Journal

This study examines the affordability of eco-housing through the integration of Compressed Earth Blocks (CEB) and clustered urban form. It hypothesizes that the combined approach of sustainable building materials and climate-responsive neighbourhood planning enhances cost and energy efficiency while maintaining social housing accessibility. By assessing economic feasibility alongside environmental and urban design strategies, the research aims to provide insights into sustainable solutions towards future urban developments and a 5th generation for Egyptian cities. Computational simulations utilizing ENVI-met for urban microclimate assessment and Design Builder for indoor environment evaluation demonstrated improved results for outdoor and indoor environments. For outdoor assessment, design …

Assessment Of The Relationship Between Performance Attributes And The Social Sustainability Framework Of Construction Projects, Van Luy Tong, Truong Van Luu

HBRC Journal

The study addresses the missing aspect of assessing social sustainability in construction project performance evaluation. While environmental and economic aspects have been widely considered, social sustainability remains largely unexplored. The study seeks to analyze whether 11 performance attributes (including 5 short-term project performance attributes and 6 long-term project performance attributes) in the construction project performance model being implemented in Vietnam reflect social sustainability in construction projects. The study applies structural equation modeling (SEM) to examine the relationship between these 11 performance attributes and the social sustainability criteria framework. A questionnaire was designed to collect data from stakeholders involved in construction …

Geophysical Characterization Of Soil Properties For Infrastructure Development: A Ves Study At The Awfi City Electrical Station, Babylon, Iraq, Amer Atyah Al-Khalidy, Qassim Abed Al-Tamimi, Hussein Kh. Chlaib, Amer J. Al-Khafaji

HBRC Journal

An electrical resistivity survey was conducted for the proposed Secondary Transformer Electrical Station project in Awfi City, Babylon Governorate, Iraq. Seven vertical electrical sounding (VES) profiles were acquired using the Schlumberger array with a spacing of 25 meters. The interpretation revealed 4 to 5 geoelectrical zones at each station, indicating significant variations in resistivity with depth. Low resistivity values (as low as 0.2 Ω.m at Station 4) correspond to clay-rich layers saturated with saline groundwater, typically increasing in concentration with depth. In contrast, high resistivity values (up to 36.3 Ω.m at Station 4) are associated with silt and …

Blind Medical Image Watermarking Method Using Combined Nsct/2d-Dct Domains, Ali Kouadri, Ali Benziane, Abdelhalim Rabehi, Mohamed Lebcir

Iraqi Journal for Computer Science and Mathematics

This paper presents a novel blind watermarking framework that combines Non-Subsampled Contourlet Transform (NSCT) and 2D Discrete Cosine Transform (DCT) domains. The proposed method embeds the watermark’s data within low-frequency coefficients of sub-vectors extracted from a concatenated NSCT/2D-DCT transforms processing. The embedding procedure involves simple differential processing which ensures a straightforward watermark extraction. Extensive testing across medical imaging modalities (X-ray, CT, MRI, ultrasound) confirmed strong imperceptibility and robustness against attacks like JPEG compression, noise, filtering, and geometric manipulations. Compared to contemporary techniques, our NSCT/2D-DCT method shows stronger robustness against attacks without compromising diagnostic quality, proving its viability for medical image …

The Environmental Integration - An Introduction To The Sustainability Of The Urban Heritage Of Nubia (Applied To Gharb Suhail), Ahmed Mohamed Said Elsaadany

Mansoura Engineering Journal

The Nubia region is an important historical and cultural place, as it is distinguished by a unique architectural heritage. The influence of the surrounding environment on the designs of buildings and structures in this region is evident. Traditional architecture arose spontaneously over long periods of time, but it was essentially based on correct scientific concepts. The architecture of Nubia in southern Egypt, which is located on the banks of the Nile River, was a mud architecture that used natural building materials from the environment influenced by Ancient Egyptian architecture, some influences from Islamic architecture represented in privacy and courtyard in …

Retrieval Augmented Framework For Deepfake Audio Detection, Avinash Saxena

Master's Theses

The widespread use of AI-based audio deepfakes threatens severely to undermine media integrity and public trust. Speech synthesis techniques have improved dramatically in voice conversion (VC) and text-to-speech (TTS) in recent years, making forgeries sound highly realistic, and concerns are raised about possible malevolent uses. Existing state-of-the-art techniques for identifying fake speech have proven to be effective in some cases but are still limited in application and robustness when faced with novel attacking strategies, different acoustic conditions, or alternative linguistic domains. To address some of these limitations, the current research presents a novel deepfake audio detection system based on personalized …

Fluorosilane-Induced Softening And Collapse Of Micropillar Arrays, Gabriela Moreira Lana, Maja Fehlberg, Petra Herbeck-Engel, Gisela Heppe, Raimund Schlüßler, Torsten Jähnke, Eduard Arzt, Roland Bennewitz

Chemical and Biochemical Engineering Faculty Research & Creative Works

Replica molding is a widely used technique for the fabrication of polymer microstructures. As structural dimensions decrease, anti-stick surface treatment of the mold becomes increasingly critical to ensure clean demolding and preserve structural integrity. We fabricated arrays of micropillars with 20 µm diameter and 60 µm height using medical-grade polydimethylsiloxane (PDMS), MDX4-4210, and observed a high fraction of collapsed pillars for the first molding after fluorosilanization of the mold to reduce sticking. To address this issue, we systematically investigated the surface treatment protocol for the molds, made from the PDMS Sylgard 184. We provide results from complementary measurement methods, to …

Flash Effect Is Diminished By Daily Fractionation Of Electron Rt In Mouse Skin, Aleksandra Ilina, William S. Thomas, Xu Cao, Matthew S. Reed, Kendall Jarvis, Albert Van Der Kogel, Nathaniel Van Asselt, Wesley S. Culberson, Brian W. Pogue

Dartmouth Scholarship

Objective. While FLASH radiotherapy is known to reduce skin damage in vivo from ultra-high dose rate (UHDR) irradiation relative to conventional dose rates (CDR), it is not clear whether this sparing is preserved when delivered as fractionated. This study was designed to directly assess whether three daily fractions would maintain the sparing effects in murine leg models and preserve the murine skin sparing with single fraction treatments. Approach. C57Bl/6j female mice were irradiated with 9 MeV UHDR and CDR beams from a FLASH-capable Mobetron system, in a dose escalation study with doses ranging from single dose 22–30 Gy in a …

A Low-Cost Fault-Ride-Through Strategy For Electric Vehicle Inverters Using Four-Switch Topology, Ehab Bayoumi

Mechanical Engineering

This paper presents a fault-tolerant control strategy that dynamically reconfigures the proposed system, and the inverter leg with a fault is isolated through a MOSFET-based clamping branch. With the use of a modified Vector Control (VC) and Pulse-Width Modulation (PWM) technique, the remaining two phases can continue operating. MATLAB/Simulink is used to create a thorough simulation model that examines various fault scenarios and evaluates how well the control process adjusts to each one. The obtained findings demonstrate that, in the event of a fault, the system can maintain accurate speed regulation, maintain a tolerable current balance, and deliver steady torque. …

A Feature-Free Deep Learning Approach For Midair Hand Gesture Recognition From Surface Electromyogram (Semg) Data, Yasir Altaf, Abdul Wahid, Mudasir Manzoor Kirmani

Turkish Journal of Electrical Engineering and Computer Sciences

Midair hand gesture recognition plays a crucial role in applications such as sign language recognition and human-computer interaction, particularly for supporting individuals with partial or complete hearing loss. However, recognizing gestures in midair remains challenging due to the rapid and complex nature of hand movements. To address this, noninvasive techniques like surface electromyography (sEMG)—which captures muscle activity through sensors placed on the skin—have gained attention. sEMG provides rich time-series data that reflect both spatial and temporal muscle dynamics. In this study, we propose a deep learning architecture that combines convolutional neural networks (CNNs) and recurrent neural networks (RNNs) to classify …

Integrated Log Spectrogram Convolutional Neural Network (Ils-Cnn) For Robust Spoken Digit Recognition, Awais Ahmed

Turkish Journal of Electrical Engineering and Computer Sciences

Spoken digit recognition (SDR), a type of supervised automatic speech recognition, is essential for various human-machine interaction applications, including banking operations, dialing systems, price extraction, and airline reservation systems. However, designing an effective SDR system presents several challenges, such as developing labeled audio data, selecting appropriate feature extraction methods, and creating high-performance models. To overcome these challenges, a novel approach for robust spoken digit recognition using an integrated log spectrogram convolutional neural network (ILS-CNN) has been proposed. The proposed work presents an efficient SDR method by taking advantage of a log spectrogram layer directly within the neural network to enhance …

Railway Track Condition Monitoring Based On Sensor Data And Artificial Neural Networks, Ivan Kots, Alina Isaeva, Mark Denisenko, Alexander Sinyukin, Andrey Kovalev

Turkish Journal of Electrical Engineering and Computer Sciences

Monitoring the condition of engineering objects is one of the urgent tasks of industry, construction, and transport infrastructure. This article describes a system for condition monitoring and diagnostics of rail tracks in real time. Compared with other similar studies, the proposed system has the advantages of compactness, usability, scalability and versatility of application. The proposed monitoring system is based on an Nvidia Jetson Nano embedded computing board and also includes inertial sensor modules, a microphone, a geolocation module, communication modules, an SSD storage device, and a battery. The prototype of the diagnostic module is a portable device that can be …

Grey Wolf Optimization Of Pi Controller For Power Management In Wind Farms: A Novel Approach, Anis Feddaoui, Lotfi Farah, Abdelouahab Benretem, Mohammed Abdeldjalil Djehaf

Turkish Journal of Electrical Engineering and Computer Sciences

This study proposes a novel power management strategy for wind farms using a grey wolf optimization (GWO)-based PI controller. The method aims to enhance active and reactive power control in systems employing dou bly fed induction generators. Three control strategies are evaluated—namely, a classical frequency-domain PI controller, an Artificial Neural Network (ANN)-based controller, and the proposed GWO-based PI controller—the last of which represents the main contribution. The classical PI and ANN controllers are included strictly for comparative bench marking. MATLAB simulations demonstrate that the GWO-beased PI controller offers superior dynamic performance, particularly in settling time and overshoot reduction. A power …

Exploring The Link Between Emotional States And Coding Task Quality: A Pilot Study, Aquib Reshad, Valentina Nino, Maria Valero, Adriane Randolph, Yang Shi

Faculty Articles

Emotions play a crucial role in shaping cognitive performance, yet their influence on programing remains understudied. This pilot study investigates the relationship between emotional states and coding task quality. Ten participants completed a programing task while their brain activity was recorded using electroencephalography (EEG), with frontal alpha asymmetry (FAI) applied as a neural marker of emotional valence. Emotional self-reports were collected using the Scale of Positive and Negative Experience (SPANE), and coding quality was evaluated through a structured rubric. Preliminary findings indicate a potential association between FAI and coding performance, whereas self-reported affect showed weaker or inconsistent patterns. Given the …

Diffog: Differentiable Policy Trajectory Optimization With Generalizability, Zhengtong Xu, Zichen Miao, Qiang Qiu, Zhe Zhang, Yu She

School of Industrial Engineering Faculty Publications

Imitation-learning-based visuomotor policies excel at manipulation tasks but often produce suboptimal action trajectories compared to model-based methods. Directly mapping camera data to actions via neural networks can result in jerky motions and difficulties in meeting critical constraints, compromising safety and robustness in real-world deployment. For tasks that require high robustness or strict adherence to constraints, ensuring trajectory quality is crucial. However, the lack of interpretability in neural networks makes it challenging to generate constraint-compliant actions in a controlled manner. This article introduces differentiable policy trajectory optimization with generalizability (DiffOG), a learning-based trajectory optimization framework designed to enhance visuomotor policies. By …

Assessment Of Traffic Related Air Pollution Effects On Indoor Air Quality In Educational Buildings, Ahmed Gouda Mohamed, Mohamed Sherif Dr., Fahad Alqahtani Dr., Yousif Deeb Eng.

Civil Engineering

This study assesses the impact of traffic-related air pollution (TRAP) on indoor air quality (IAQ) within a Riyadh school. The main objectives are to pinpoint factors influencing IAQ and to evaluate the effectiveness of existing ventilation and filtration systems. Air quality Egg sensors monitored nitrogen dioxide (NO2), carbon monoxide (CO), and particulate matter (PM1.0, PM2.5, PM10) levels both indoors and outdoors over 30 days. Findings revealed average indoor PM2.5 and PM10 concentrations of 14.09 µg/m3 and 18.15 µg/m3, respectively, while outdoor concentrations averaged 20.63 µg/m3 and 27.88 µg/m3. A strong positive correlation was observed between indoor and outdoor PM levels, …