Digital Commons Network^™

Trust And Pre-Employment Background Checks When Onboarding And Maintaining Information Security And Cybersecurity Staff, Stanley Mierzwa

Center for Cybersecurity

The realm of trust is broad and can include many facets that are difficult to capture and catalog. In relation to the work roles of information security and cybersecurity, the intersection of trust in human resource management is critical and an evolving area within most modern organizations, in almost any sector, and of any size. A foundational element of trust is fundamental to effective mission and work roles in information security and cybersecurity, as well as to every employee tasked with contributing to the security of an organization’s assets. This chapter will include sections on the role trust can and …

Reinforced Concrete Design Fundamentals, Belen Stephanie Martinez Espinoza, Estevan Jacob Perez

Architectural Engineering

Hispanic workers make up a large and growing portion of the construction workforce in the United States; particularly in California, the percentage of construction workers who are Hispanic is estimated to be about 55% as of 2021 (Elkins). Many of these workers are Spanish-speaking, yet there is still a gap between technical engineering design and what is understood and applied in the field. One major reason for this gap is the lack of clear bilingual resources. To bridge the gap, a 48-page bilingual booklet titled Reinforced Concrete Design Fundamentals (Fundamentos del Diseño de Concreto Reforzado in Spanish) was created. This …

Design And Implementation Of A Honeycomb Damping System For The 2026 Eeri Seismic Design Competition, Vera Nguyen, Lauryn Wojcik

Architectural Engineering

The authors of this report were a part of the 2026 Earthquake Engineering Research Institute (EERI) chapter at California Polytechnic State University, San Luis Obispo. In July 2026, they will travel to Portland, Oregon with 12 students to compete in the Undergraduate Seismic Design Competition hosted by EERI. The competition required teams to develop a comprehensive structural design proposal that included computer-based modeling and analysis, construction of three physical models, and the preparation of both a technical poster and oral presentation for a proposed high-rise building located in Portland, Oregon. Cal Poly’s “Illahee Tower” was designed with an emphasis on …

Early Dementia Tracking Utilizing Virtual Reality, Gabriel Deguzman, Manuel Hernandez, Ryan Iglesias, Jose Ornelas

General Engineering

This project aims to create a simulation in virtual reality that replicates an activity that older adults are familiar with and presents an objective for the user to complete. The simulation will monitor the user’s cognitive functions based on their performance. The functionality of the designed program includes, but is not limited to: continuous tracking of cognitive behavior, skipped steps, and completion times. The program will take in relevant data and provide results on the monitored tasks and give the user a conclusion for further action. The application of this simulation will not be used as a medical device or …

Wind Power Turbine Pitching, Sierra Bindseil, Olivia Hoffsis, Izik Hingeley, Tucker Donahue

Mechanical Engineering

It is crucial that wind turbines are able to control the angle of their blades relative to the wind for optimal performance, efficiency, and safety [1]. This project will design a pitching mechanism for the Cal Poly Wind Power turbine that will compete in the Collegiate Wind Competition (CWC). Currently, for full scale wind turbines, the industry standard design includes the pitch of each blade being controlled by its own individual motor [2]. Because of the smaller scale of Cal Poly Wind Power’s turbine, along with power usage constraints, three separate motors are not a practical approach. Cal Poly Wind …

Cal Poly Fluid Powered Vehicle Challenge 2025/2026, Ethan Malachi Nejame Zeiset, Christian Anthony Cuamani, Daniel Chacon-Bizarro, Marcus Minera, Bradley Hansell

Mechanical Engineering

In this Final Design Report, the Cal Poly Fluid Power Vehicle Challenge Contending Team competed in Sun Hydraulics’ 2026 Fluid Powered Vehicle Challenge. The objective of the competition is to expose college students to the fluid power sector, the “hidden giant” of the engineering industry. Specifically, student teams are tasked with the development of a human-powered, fluid-driven vehicle for use in various competitive settings. The team prioritized the optimization of an existing prototype for simplicity, ease of maintenance, and reliability during the competition. The existing prototype exhibited issues related to the main frame’s deflection under load, a lack of gear …

Off-Grid Cabin Hydroelectric Generator, Keller Feltman, Lance Savatgy, River Perino, Jesse Valencia

Mechanical Engineering

This project developed a portable hydroelectric generator intended to provide low-power electricity generation for an off-grid cabin in Alpine County, California. The system was designed to utilize naturally occurring creek flow to generate electrical power while remaining portable, durable, and environmentally conscious.

The final system consists of an axial-flow turbine, belt-driven generator subsystem, waterproof electronics enclosure, aluminum support frame, and integrated wildlife protection screening. Engineering analysis was performed to estimate hydraulic power availability, turbine performance, drivetrain requirements, and component lifespan. These analyses guided the selection and development of the final design.

Throughout prototype testing, several design modifications were required. Initial …

Elastic Actuator For Robotic Leg, Bruce Berg, Allan Pham, Madeline Slater, Sofie Zalatimo

Mechanical Engineering

The Cal Poly Legged Robots Group (CPLRG) is developing a 12 degree of freedom robot with the goal of eventually performing highly dynamic movements such as jumps and flips. During such movements, large impact forces will be experienced by the leg, potentially resulting in damage to physical components such as the motors. The scope of this project is to integrate elastic elements into the quadruped legs to reduce shock loads on the motors and improve the efficiency of the legs through energy storage. The key stakeholders for this project are Professor Charlie Refvem and Dr. Simon Xing. Other stakeholders include …

How Modular Construction Techniques Can Be Beneficial To The Nuclear Construction Industry, Samuel Lawrence Maurer

Construction Management

Nuclear energy will soon be needed to supply sustainable and clean power to companies that work with Artificial Intelligence and Quantum Computing. Across the world, lots of large-scale nuclear power plants that have been recently constructed have had many issues, such as cost overruns, schedule delays, permitting issues, and more. The purpose of this project is to examine how modular construction, specifically in the form of Small Modular Reactors (SMRs), can positively impact the nuclear construction industry and potentially reduce some of the common issues that these large-scale nuclear power plant projects typically face. The findings suggest that the use …

Skip The Grid 2026: Off-Grid Power For Hopi And Navajo Families, Xanthus Aurelius Poole Silverstein

Construction Management

Skip the Grid is an interdisciplinary service-learning project that provides sustainable energy solutions to families with school-aged children living in the Navajo and Hopi Nations. In March 2026, a team of 23 students from five academic disciplines at California Polytechnic State University (Cal Poly) partnered with Heart of America, SOLV Energy, and NextPower to complete the fifth year of the program. The project's purpose was to improve quality of life and support educational success by providing reliable access to electricity, lighting, and refrigeration in underserved communities. Participants were organized into five installation teams consisting of Cal Poly students, faculty, industry …

Improving The California Boulevard Railroad Underpass: A Feasibility Study Of Persistent Barriers And Practical Improvement Strategies, Jacee D. Carpenter

Construction Management

The California Boulevard railroad underpass in San Luis Obispo has served as an informal pedestrian route for Cal Poly students since pedestrian access across the adjacent railroad tracks was restricted in 2009. Despite its frequent use, the underpass presents challenges related to lighting, drainage, surface conditions, and seasonal flooding that affect safety and accessibility. Previous studies documented these concerns and proposed improvement concepts; however, no significant physical improvements have been implemented. This project evaluates the factors contributing to the lack of improvements and examines practical strategies for enhancing the underpass within existing regulatory, environmental, and jurisdictional constraints. Methods included a …

Design And Optimization Of A Bluff Body For Energy Harvesting Of Transverse Galloping Induced By Low-Speed Wind Using Bernstein Polynomial Equations, Youssef Wael Abdelmoneim

Theses and Dissertations

In this thesis, a computational framework is proposed for optimizing the aerodynamic shape of bluff bodies used in galloping-based wind energy harvesters. The system targets low-wind speed environments, where normal wind turbines are not effective, offering a potential alternative to batteries used for powering small electronic devices such as wireless sensors. The design relies on the galloping effect, where airflow around a bluff body induces transverse oscillations that drive an energy conversion mechanism. To generate efficient bluff body geometry, the Class-Shape Transformation (CST) method is used to define a wide range of candidate shapes with minimal design parameters. These shapes …

Capstone Review: Warn Winch Proximity Sensor, Leana Girton

University Honors Theses

This thesis reviews the mechanical engineering capstone project that designed a winch proximity sensor for WARN Industries. WARN is very interested in developing this product for market as a safety and ease-of-use accessory, and working with Portland State University was the first step in this process. A group of four mechanical engineering and four electrical engineering capstone students collaborated to research sensor types, test the selected methods, and design and build a prototype. The final design implements an inductive ring, a mechanical button, and bluetooth signaling. The project succeeded in prototyping a proximity sensor for WARN, who will have access …

A Near-Field Communication (Nfc) Multi-Sensor Node With Optimized Read Range And Adaptive Power Management For Remote Monitoring, Rishin Patra, Hilary Scott Nkimbeng Cho, Jin W. Choi

Michigan Tech Publications

This paper presents the design of a batteryless near-field communication (NFC) multi-sensor node with an integrated adaptive power-management system for sensing applications. The work focuses on harvesting energy from a 13.56 MHz NFC field to power an ultra-low power sensing platform. The design consists of the TI RF430FRL152H, an integrated NFC transponder with an embedded MSP430 microcontroller core and ferroelectric random-access memory (FRAM) non-volatile memory. The system combines an ISO/IEC 15693 NFC front end, a tuned loop antenna for optimized power harvesting, and multiple analog and digital sensor interfaces, and a firmware architecture for intermittent harvested energy operation. The aforementioned …

Building Services Engineering May/June 2026

Building Services Engineering

No abstract provided.

Can Generative Ai Make Farming Decisions? Current Status And Future Pathways: A Case Study In Row Crop Production With Chatgpt, Nipuna Chamara, Yufeng Ge, Joe Luck, Yu Pan, Saleh Taghvaeian, Cory Walters, Christopher Proctor, Daran Rudnick, Daren Redfearn

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The agricultural decision-making process is experience-based, knowledge-dependent, time-sensitive, complex, and driven by historical data. Planting, fertilization, irrigation, and chemigation are key categories in farm decision-making, and currently there is no one-shot decision-support tool that covers all these activities. Generative Artificial Intelligence (AI) models are more advanced than traditional machine learning and deep learning models. These models have been trained on vast amounts of data from the internet, allowing them to accept unstructured data in various forms and generate human-like text, solutions to problems, and scenario predictions. Given this capability, we became interested in exploring the potential of generative AI in …

Construction Of Lightly Reinforced Concrete Walls And Foundations For Fiber Reinforced Polymer Testing, Aidan D. Seed, Coulter Langmaid, Ryan R. Bousfield, Bennett B. Steiger

Construction Management

This paper details the construction of two cast-in-place concrete walls with attached footings, built to continue ongoing research into Fiber Reinforced Polymer (FRP) retrofitting conducted by California Polytechnic State University, San Luis Obispo, Architectural Engineering (ARCE) department. The project was located inside the College of Architecture and Environmental Design (CAED) High Bay testing facility and is part of a multi-year effort to evaluate FRP wrap as a seismic retrofitting option for lightly reinforced concrete walls dating to the pre-1980s. Formwork from the previous year's senior project was reused for this effort, and a two-phase pour was utilized and executed by …

Sheep Pen Improvements At City Farm Slo, Rylan Joseph Hickman

Construction Management

This project took place on a non-profit community farming space called City Farm SLO which provides opportunities for local small scale independent farmers to farm and provide crops to the community. Our project provided improvements to the livestock pen that they have on the farm which is home to chickens and a flock of sheep. The main goal of this project was to provide a better living environment for the sheep including a 50 cubic yard sheep hill, a vehicle access gate, a side gate, a front catch pen, a back corral, and protective fencing for a guava tree. Within …

Beyond Contract Law: Expanding Legal Education In Construction Management, Grace M. Hetland

Construction Management

The California Polytechnic State University Construction Management (CM) program is designed to prepare students for the managerial responsibilities of the construction industry. However, construction projects involve a broad range of legal considerations that extend beyond traditional contract administration. While the CM curriculum currently includes a course focused on construction contract law, there is limited exposure to other legal disciplines that frequently affect construction professionals throughout the project lifecycle. This research explores the potential value of expanding construction law education in the CM curriculum by implementing an additional topics course as an elective for students. To determine which legal subjects would …

Gps Tracking Smart Dash Cam Capstone Review, Simrah Saleem

University Honors Theses

This thesis details our design, implementation, and collaborative development of an intelligent vehicle logging system built on a Raspberry Pi 5. Unlike standard consumer dash cams that act as closed "black boxes," our system uses a dual-camera stereo vision setup integrated with centimeter-level accuracy. While we successfully built a functional Proof of Concept capable of event-triggered recording, dual-monitor visualization, and smart detection and recognition, this paper focuses on our engineering journey and the real-world challenges we faced. Using an Agile framework, we split into three specialized sub-teams to handle hardware, database, and interface design in parallel. This structure created unique …

Foundation For A Digital Beamforming System Using Software Defined Radio, Daniel Cruz Guerrero, Shiron Bendrihem, Benjamin Tucker

Electrical Engineering

This report demonstrates a basis for the foundation of a software-defined radio (SDR)-based digital beam forming system. Specifically, a discussion of time, frequency, and phase synchronization is had in the absence of costly hardware like an OctoClock. Furthermore, this report digs deep into the design process and device characterization of a 4-way Wilkinson Power Divider, which is a necessary hardware component for phase calibration. SDR synchronization and calibration are critical in any digital beamforming system.

Maximum Power Point Tracking For Photovoltaic Cells, Rodrigo Menchaca-Ramirez, Jesus Martinez, Steven Rodriguez

Electrical Engineering

Unlike an ideal DC Power Supply, a solar panel does not operate with linear I-V Characteristics. The voltage and current characteristics of a solar panel change based on irradiance, temperature, weather conditions, and load demand. Because of these factors, solar panels do not always operate at their Maximum Power Point, which can lead to significant power losses. Maximum Power Point Tracking is used to adjust the panel operating point so that more usable power can be delivered to the load.This project developed a Maximum Power Point Tracking system using an STM32 Nucleo-L4A6ZG microcontroller and an LT8705A DC-DC converter stage. The …

Design, Build, Fly 2026, Unique Barnes, Dante Black, Kyle Greiner, Gabriel Kern, Justin Mayer, Charles Olsen, Jack Quinn, Ben Randall, Tate Schurman, Mark Williams, Brendan Yarusso

Mechanical Engineering Senior Theses

This thesis follows the design, manufacturing, and testing of Santa Clara's 2026 AIM Design, Build, Fly Team. The project is built on one main system with multiple subsystems related to the payload and integration of payload. The main system is the Wings of Theseus which is a 5 ft span electric remote controlled plane designed to complete 4 four missions: rapid loading and unloading of payload, airworthiness, internal payload flight, and towed payload flight. Each of these missions is directly related to the aforementioned subsystems. The Wings of Theseus incorporated a rectangular wing with geometric twist as well as a …

Cathy’S Catcher, Marlee Scott, Regen Worsley, Alessandra Valenzano, Aviv Ben Zeev

Mechanical Engineering

Deep-sea fishing presents significant challenges for individuals with upper-limb differences, particularly when using prosthetic devices that are not designed for recreational fishing activities. This project developed a custom prosthetic fishing rod attachment for a user who had lost her forearm and desired a safe, comfortable, and independent method of fishing. Through interviews with the sponsor and an iterative design process, a lightweight aluminum attachment was created to interface directly with the user's existing prosthetic quick-connect system.

The design process included concept generation, CAD modeling, rapid prototyping with 3D-printed models, manufacturing, and user-centered refinement. The final design consists of a welded …

Elevate Grill, Tanner Bachmann, Lance Anderson, Caden Huang, Jonathan Li, Brady Alexander

Mechanical Engineering

Santa Maria-style grills are a defining cooking tool of California’s Central Coast and are valued for their open fire cooking method and adjustable grate height. While this design provides direct control over cooking conditions, maintaining a consistent cooking temperature requires frequent manual adjustment of the grate position. This process relies heavily on operator experience and continuous attention, making temperature consistency difficult to maintain in a commercial kitchen environment. The Elevate Grill project was developed for Mike Ahrens and Wren Provisions to address this challenge while preserving the traditional Santa Maria grilling experience. The system uses temperature feedback from multiple thermocouples …

Stakblocks, Micah Satoshi Inoshita, Ava Rose Doerschlag, Cody J. Ellis, Zach M. Lawton, Fernando M. Nalin, Nicholas Humphrey, Aiden Reed Anderson, Sara Maya Suratkal

Mechanical Engineering

Researchers developing sustainable building materials from agricultural waste need a faster way to prototype and evaluate small-scale samples under controlled temperature and pressure before scaling to production. Sponsored by Professor Pete Schwartz of Cal Poly San Luis Obispo, whose work focuses on sustainable technology for developing communities, this project aims to create a prototype testing device for researchers studying agricultural-waste bricks, with the University of Malawi as a potential future testing partner. The final product is intended to inform improved future designs rather than serve as a production-ready device, ultimately supporting the development of affordable, sustainable building materials for communities …

Toro Cover For Bob Packer, Bailey Smolinski, Brandon Petty, Arturo Ramirez, Kathryn Proctor

Mechanical Engineering

Small pools, spas, and hot tubs are common in residential homes, yet small pool owners face persistent tradeoffs between critical features such as weight, ease of use, and appearance in pool covers currently available on the market. Most products optimize a single attribute at the expense of others. For example, solar covers are energy efficient but structurally weak, safety meshes are cost-saving but intensive to install, and retractable covers are automated but expensive. Beyond these tradeoffs, existing solutions often demand multiple people to install, take time and effort, occupy valuable deck space, and sacrifice the surrounding aesthetic. Therefore, small pool …

Foldable Transfer Platform, Toby Sagi, Ashton Heiati, Triton Johnson, Zachary Denis

Mechanical Engineering

The report details the design and results of a Hoyer lift to transfer patients between wheelchairs and our sponsor's, Beacon VTC Santa Maria, vans. The lift disassembles into 3 main pieces, allowing the lift to be stored in the back of the van. The lift uses a hydraulic actuator to rotate the boom. We handed over our project to Beacon VTC Santa Maria for use in their facility!

Package Access Platform, Tyler Connor Moyers, Austin Sien, Brooke Almaraz, Aiden Montano

Mechanical Engineering

This Final Design Review (FDR) presents the completed package access platform project following fabrication, assembly, and verification testing of the final prototype. The project focused on the development of an adjustable and modular access platform capable of adapting to varying workspace requirements while maintaining operator safety and structural stability. The finalized design incorporates adjustable platform dimensions, modular frame expansion, integrated OSHA-compliant handrailing, and adjustable support legs to accommodate uneven surfaces and changing operational needs.

Water Turbine Dynamometer For Low-Power Turbomachinery Testing, Carmen Alaichamy, Yosef Huynh Torres, Michael Duperly, Michael Thomas Duff

Mechanical Engineering

Students in ME 443: Introduction to Turbomachinery compete to design and build efficient small impulse turbines. The course lacks a standardized method to experimentally calculate turbine power output and mechanical efficiency from accurate measurements of torque and speed, for example. To support the learning goals of ME 443, a dedicated water-turbine dynamometer is needed to provide controlled hydraulic power, accurate mechanical and electrical measurements, and clear data for performance evaluation.

Our proposed system delivers a safe, repeatable, and educational testing environment that can be integrated into the Fluids Lab or used as a standalone instructional tool. Key stakeholders include Professor …