Digital Commons Network^™

Wireless Communication In Autonomous Vehicles, Kaylie Bao, Nicholas Andrews, Mark Negus

Electrical Engineering

This project focuses on developing and testing a vehicle-to-everything (V2X) communication system using Dedicated Short Range Communications (DSRC) based on the IEEE 802.11p standard. The system uses the NXP i.MX 8XLite V2X Evaluation Kit, which includes the SAF5400 modem for wireless communication in the 5.9 GHz band.

The main goal of this project was to establish reliable communication between two V2X evaluation boards and to verify that custom, user-defined data could be transmitted between them. Through iterative testing, we were able to successfully send and receive custom 802.11 frames using the provided command-line tools and achieve consistent communication between nodes. …

Vlsi Spike Encoder For Spiking Neural Networks With 4-Bit Sar Adc, Jack Marshall, Wyatt Tack, Cameron Young, Ryken Thompson

Electrical Engineering

A spike encoder forms the interface between sampled data, such as image data or a sensor signal, and a spiking neural network by converting numerical input samples into discrete spike events. Unlike conventional artificial neural networks, spiking neural networks use spare, even-driven computation instead of continuous-valued activations. This makes them attractive for low-power embedded systems, biomedical electronics, and other edge applications where energy consumption, physical area, and thermal limits are important design constraints.

This project develops a modular spike encoder architecture for spiking neural networks with selectable support for temporal, rate, multi-spike, and delta encoding. Prior work has shown that …

Lora Radio Propagation & Antenna Design For Freight Trains, Cesar Chavez, Marlon Jennson Hernandez

Electrical Engineering

Freight-train environments present significant challenges for wireless communication due to large metallic structures, varying cargo types, and changing antenna orientations that can degrade radio-frequency propagation. This project evaluated the performance of LoRa-based communication links intended for End-of-Train (EOT) and Head-of-Train (HOT) systems operating at 915 MHz. Field testing was conducted to characterize antenna performance using metrics including received signal strength indicator (RSSI), signal-to-noise ratio (SNR), and communication range. Experimental results showed that antenna polarization and directivity significantly affect communication performance in freight-train environments. Directional antennas provided improved signal strength when properly aligned but experienced performance degradation as antenna orientation changed. …

Cal Poly Mars Rover Battery Management System, Lawrence Nichols, Caleb Michael King, Thomas Anh Khoa To, Angel Soto

Electrical Engineering

The exploration of space has consistently been one of the most expensive endeavors humanities has undertaken in its journey to expand ever further. The PolyRover project aims to not only cheapen that expense through student-based research but also provide a better bang for buck as more unmanned ground vehicles (UGVs) can be utilized on planets in concert. In order to do so, the rovers need a robust, yet compact battery management system that can fit within the wheel well. Our system will consist of six commercially-available 18650 batteries in series, organized in a hexagonal fashion around the motor. The BMS …

Lora Networking Hardware Reference Designs For Terrestrial And Low-Earth-Orbit Communications, Kevin Nottberg

Master's Theses

The work presented here demonstrates a highly robust and tested LoRa networking hardware reference design to meet the needs of the embedded networking company OWL Integrations. The hardware presented integrated a unique combination of features and design choices. The detailing of its unique design is potentially of use to others for use in fielded battery powered terrestrial sensor networking hardware utilizing LoRa. Also, the terrestrial hardware presented is shown to have the capability to support command and control (C2) LoRa links in low-earth orbit beyond terrestrial systems. The design presented has a more U.S. centric component bill-of-materials (BOM), with the …

Trim-Transfer: A Transfer Learning Approach For Cross-Trim Level Can Intrusion Detection, Baylor J. Whitehead

Master's Theses

Modern vehicles contain many Electronic Control Units (ECUs) that communicate through CAN. While CAN enables efficient data communication, it lacks built in authentication and encryption, allowing adversarial actors to inject malicious CAN messages. This limitation has motivated the development of CAN intrusion detection systems (IDS). However, deploying IDS across a vehicle lineup requires collecting large labeled datasets and retraining models, increasing development cost and limiting scalability.

This thesis investigates the use of transfer learning with LSTM-based deep neural networks to reduce retraining cost while maintaining model detection performance. A baseline LSTM model is trained using CAN data from a base …

A Comparative Study Of Model Predictive Control And The Stanley Method For Vehicle Path Tracking Applications, Noah S. Fitzgerald

Master's Theses

This thesis compares a model predictive controller (MPC) and a lateral Stanley controller for vehicle path-tracking applications under simulation-based and perception-driven operating conditions. Both controllers were evaluated in simulation using a nonlinear dynamic bicycle model executing single and double lane change maneuvers. Following simulation-based evaluation, both controllers were implemented on hardware within a perception-driven steering-control pipeline. This pipeline utilized recorded sensor data from the MXcarkit 1/8^th-scale autonomous vehicle platform, incorporating lane instance segmentation and homography-based roadway estimation.

Under idealized simulation conditions, the MPC demonstrated improved trajectory-tracking performance during aggressive maneuvers while requiring greater steering activity and computational effort …

Discrete S-Band Low-Noise Amplifier Designs For High Data-Rate Cubesat Uplink, Alejandro Martin Cosper, Alejandro Cosper

Master's Theses

In the world of small satellites, there is growing interest in higher-data-rate systems and the technologies that enable them. Due to limitations in the extremely reliable and proven Ultra-High Frequency (UHF) systems, the current CubeSats developed by the Cal Poly CubeSat Laboratory operate at 9600 Baud. However, the low Baud rate is rooted in decades of proven flights and is very resistant to many forms of signal degradation. While a slow but simple system was critical to past successes, future satellite payloads may require higher data rates to drastically reduce the number of passes needed to transfer large amounts of …

A Study On Quantization And Hardware Cost Tradeoffs In A 5g Nr Ldpc Decoder On Fpga, Giancarlo Acosta

Master's Theses

The fixed-point implementation of a 5G New Radio LDPC decoder forces a tradeoff between precision and hardware cost, governed by the variable node word length W_L, the check node message width W_R, and the normalized min-sum correction factor α. This thesis characterizes how these three parameters affect both error correction performance and FPGA resource utilization for an LDPC decoder on an established LDPC decoder architecture. A bit-accurate MATLAB core model records bit error rate (BER) and frame error rate (FER) while a verified HDL Coder model generates synthesizable VHDL for Vivado synthesis, and both are swept …

Deep Learning For Affect Recognition: A Comparative Study Of Physiological Sensor-Based And Facial Image-Based Approaches, Ravi Panchal, Ravi Panchal

Master's Theses

This thesis investigates deep learning approaches for affect recognition using wearable physiological signals and facial image data. The sensor-based component evaluates stress and affect recognition on the WESAD dataset using wrist-based physiological windows and examines multiple temporal modeling strategies, including convolutional, recurrent, hybrid CNN-LSTM, attention-based, ensemble, and time-frequency approaches.

The image-based component evaluates hard-label facial expression recognition on AffectNet+ using pre-trained ResNet-50, EfficientNet-B3, and ConvNeXt-Tiny architectures across Easy, Challenging, and Difficult subsets representing different levels of expression ambiguity.

Experimental results show that the proposed Multi-Branch Attention CNN-BiLSTM (MBA-CNN-BiLSTM) model achieves the strongest wearable stress- and affect-recognition performance among the evaluated …

Reproducing And Evaluating Charger Surfing: Robustness Of Smartphone Charging-Line Side-Channels, Colby M. Watts

Master's Theses

Smartphones are frequently connected to external, untrusted charging hardware, creating opportunities for side-channel attacks that do not require malware or direct access to device data. Charger Surfing, a recently proposed charging-line power analysis side-channel attack, reported high accuracy in inferring touchscreen input from voltage measurements collected from a smartphone’s charging cable; however, the reproducibility and robustness of these results under different conditions remain unclear. This thesis presents an independent replication and evaluation of Charger Surfing, including the development of an end-to-end data collection pipeline consisting of a modified charging cable, oscilloscope-based recordings, custom Android app, automated trace processing, and convolutional …

Improving The Reliability And Performance Of A Supersonic Indraft Tube Wind Tunnel, Christian J. Kaml

Master's Theses

Access to supersonic testing is increasing in demand, and wind tunnels remain one of the safest and most cost-effective methods for gathering high-speed flow data. Despite being more economical than alternative options, supersonic wind tunnel facilities often require substantial investment to construct, operate, and maintain.

The novel indraft tube tunnel architecture was conceived as a high-speed flow testbed that incorporates features of both Ludwieg tubes and indraft wind tunnels to maintain costs low enough to be accessible even to small universities. This design was first developed and tested in 2018 at California Polytechnic State University, featuring a cost per test …

Preserving Structural Alias Information Across The Mlir-To-Llvm Lowering Boundary, Shravan Sheth

Master's Theses

Machine learning training and inference workloads run at massive scale, where the efficiency of generated machine code directly affects throughput and energy consumption. The compilers that lower model specifications to hardware instructions rely on optimization passes that can only exploit information visible in the representations they operate on. MLIR, the intermediate representation framework underlying production machine learning compilers such as IREE and Triton, is designed so that each abstraction level can encode semantics that lower levels cannot represent. One example is memref.subview, which partitions a buffer into typed regions with explicit offsets and sizes, making structural non-overlap provable from the …

Praxsmith: An Actor-Centric Domain Specific Language For Emergent Narratives In Video Games, Jacob C. Kelleran

Master's Theses

The video game industry is rapidly growing, and interest in game development is growing alongside it. Among this growing interest is a desire to include branching and emergent narratives in games. This subject is understood to be difficult, as every possible trajectory within the story creates exponential complexity. Large studios are sometimes able to create convincing implementations, but that is often with hundreds of developers and writers. Over the years, various solutions have been proposed to create frameworks and languages that aim to tackle this problem, with varying degrees of success. Some frameworks attempt this by placing the focus on …

Building And Facility Asset Inventory Assessment And Maintenance, Catherine Keathley, Bethany Paris, Jon Wilcoxson

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC) manages approximately 1,500 buildings statewide, including facilities such as office buildings, maintenance and equipment garages, and storage sheds. Because managing buildings and properties requires considerable effort, agency decision makers need reliable monitoring and management tools that generate and organize data which can be used to determine the best course of action for facility maintenance and replacement. In addition to assessing the Cabinet’s building inventory, this report advances recommendations to improve the collection, management, and reporting of facility-related data. Assessment of the inventory managed by KYTC included geolocation of all properties and the buildings therein. Once …

Bowl-O-Matic, Nathan Lin, Luis Torres, Jill Worthington, Aiden Foote

Mechanical Engineering

Adaptive physical education presents the unique challenge of accommodating individuals with diverse physical and cognitive abilities. Instructors and program designers must often integrate specialized equipment, fixtures, or features to ensure activities remain safe, inclusive, and user-friendly. Beyond accessibility, adaptive physical education highlights the importance of empowerment— enabling every participant to experience personal growth, confidence, and connection through movement. Friday Club, a local San Luis Obispo program supported by Cal Poly’s Kinesiology Department, embodies these values by providing adaptive physical activities that promote health and well-being for individuals with varying abilities. One of the most popular and regularly held activities is …

Cosmetic Clamper, Daniel Peter Gates, Bruno Roberto Martinez, Samantha Remy, Zachary Joseph Roeber

Mechanical Engineering

Cosmetic Clamper Mechanical Engineering Senior Project was a senior project at California Polytechnic State University, San Luis Obispo in the College of Engineering, Mechanical Engineering Department. The project ran from September 2025 to June 2026. The project developed the Cosmetic Clamper device, an accessibility product designed to help individuals with unilateral upper extremity motor deficits open, use, and close cosmetic containers independently.

Me3329 Modular Phonograph Gearbox, Garrett Andrik Leighton, Preston Robert Hupe, Gavin Carter Ebner, Andrew Renato Reyes

Mechanical Engineering

The Mechanical Engineering Department at California Polytechnic State University, San Luis Obispo (Cal Poly), seeks to develop a laboratory tool allowing students to reinforce concepts of gears for Mechanical Systems Design (ME329). Some current laboratories do not provide students with hands-on interaction, and the department lacks equipment and documentation to support a standardized lab. With ME329 expanding from ten to fifteen weeks, there is an opportunity to create a physical gearbox design lab allowing students to reinforce lecture material in engaging ways, while standardizing student learning. This senior project is presented and sponsored by Professor Alan Zhang. It will be …

Effect Of Allocation And Allocation Avoidance Methods On Life-Cycle Impact Results For Tellurium Production From Copper Anode Slimes, Ioanna Paschalidou, Kwame Awuah-Offei, Michael Moats

Mining Engineering Faculty Research & Creative Works

The global transition toward green energy has increased demand for metals and intensified the need for sustainable supply sources. Tellurium (Te), an essential metal for photovoltaics technology, is produced primarily as a by-product of copper refinery slimes treatment. This study conducts a life-cycle assessment (LCA) study of Te production to investigate the effect of environmental impact allocation choices on LCA results in multi-product metal systems. A cradle-to-gate LCA model of the Te product system was developed in SimaPro v9.5.0.1 software by combining industrial data, Ecoinvent v3.7.1 datasets, and literature information. Environmental impacts were quantified using the ReCiPe v1.04 Midpoint method …

Leveraging Ict Adoption And Electricity Access For Sustainable Agricultural Productivity Among Nigerian Households, Menghan Huang, Qin Chen, Oluwayemisi Kadijat Adeleke, Mamdouh Abdulaziz Saleh Al-Faryan

The Philippine Agricultural Scientist

This study investigated ICT adoption (mobile phone and internet usage), access to electricity, and their impact on household agricultural productivity in Nigeria, Africa’s largest economy. Utilizing Wave 4 (2018 to 2019) Living Standards Measurement Study–Integrated Survey on Agriculture (LSMS–ISA) data covering 4,980 household heads, this study applied logit regression and Propensity Score Matching (PSM) for estimation, alongside a Cobb-Douglas production function to analyze input contributions to agricultural output. The findings revealed that the age, residential location, educational level, and access to electricity of household heads significantly determine technology adoption among farming households. Furthermore, ICT adoption exhibits a significant, positive relationship …

Evaluation Of Alternative Solvents For Electrospinning Occluded Scaffolds To Model Intracranial Atherosclerotic Disease In Blood Vessel Mimics, Olivia D. Rankin

Master's Theses

Intracranial atherosclerotic disease (ICAD) is characterized by a buildup of fatty plaque within the walls of arteries supplying the brain, resulting in vessel narrowing, restricted blood flow, and increased risk of ischemic stroke. While various treatments exist for ICAD, most are accompanied by high recurrent stroke rates and other adverse events, highlighting the need for further investigation and models for pre-clinical testing. Tissue engineered Blood Vessel Mimics (BVMs), consisting of a polymer scaffold sodded with human vascular cells, serve as physiologically relevant in vitro models for vascular device testing. This thesis focused on the application of alternative solvents to a …

Matlab Shake Table Control And Data Acquisition System, Abigail Austin

Architectural Engineering

The College of Architecture and Environmental Design’s (CAED) seismic laboratory shake table is used for earthquake engineering education and experimental testing. However, the existing control system is outdated and difficult for students unfamiliar with the system to operate. The objective of this project was to develop a MATLAB-based control and data acquisition application to simplify shake table operation and improve accessibility, of both operation and output, for student users.

The developed application imports earthquake acceleration records, scales the input motions to the operational limits of the shake table, and executes the desires motion through the existing hardware system. Experimental data …

Electrically Evoked Emg Decomposition Using The Perturbative Generalized Series Expansion, William R. Walker

Master's Theses

Electrically evoked electromyography records the muscle's response to nerve stimulation and has been used for clinical assessment of neuromuscular function, as well as treatments such as functional electrical stimulation or stroke rehabilitation. In every muscular contraction, an electrical signal is generated. These signals come from the summation of simultaneously recruited motor units, enabling decomposition techniques to reveal information about motor unit recruitment.  By improving the ability to decompose and analyze these signals, clinical treatments involving neuromuscular electrical stimulation can be optimized and better understood. Much of the research on EMG analysis focuses on voluntary EMG, leaving a gap in the …

Develop & Test Radar Assignments For Future Graduate Curriculum, Thomas Ky Hong, Christopher William Hoferer

Electrical Engineering

With Cal Poly’s switch to semesters, many upper-level electives lack enough depth and structured content for the new 15-week format. In addition, while the Electrical Engineering department currently offers approximately five weeks of RADAR-focused laboratory material within EE 424: Intro to Remote Sensing, this limited exposure is insufficient to provide students with a comprehensive understanding of RADAR theory and practical applications. The semester conversion presents a timely opportunity to expand this existing five-week RADAR segment into a full 15-week course that integrates both lecture and laboratory content. To address the current curriculum gap, we have seamlessly extended the RADAR exercises …

Vision-Guided Motion Planning For Autonomous Catch With A Robotic Arm, Kayla Go-Oco, Ashik K. Islam, Raegan Gritzmacher

Electrical Engineering

Modern robotic systems are often evaluated using static and highly controlled tasks, such as pick-and-place demonstrations, which do not fully represent the uncertainty and adaptability required in real-world environments. A major challenge in robotics research is enabling robotic systems to perceive, track, and respond to dynamic objects in real time while maintaining accurate and reliable motion control. This project addresses these challenges by developing an autonomous robotic platform in which an OpenMANIPULATOR-Y robotic arm detects, tracks, and attempts to catch a moving tennis ball using a vision-guided control system. The system integrates YOLO-based object detection with an Intel RealSense D455 …

Shared Language For Responsible Ai Integration, Asa B. Stone, Mark C. Stone, Alisha Bevins, Jean Claude Niyomugabo, Irene Magara, Jacob Abaare, Derek M. Heeren, Mubarak Abu Zouriq

PRAIRIE: Pioneering Responsible AI for Research, Innovation, and Education

As AI rapidly reshapes how we work and learn, employers increasingly seek graduates who can think before they prompt, exercising judgment under pressure rather than merely producing output. Yet students are praised for AI use in one course and penalized for it in the next, and faculty are left to lead responsibly on shifting ground, with no shared language to guide them.

This paper introduces the PRAIRIE Framework for AI Integration, a shift from reactive gatekeeping toward proactive stewardship. It emerged from a qualitative sentiment analysis of three communities (students, faculty, and industry partners) whose concerns converged on one need: …

Teaching Learning Newsletter Vol 6 Issue 1, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

A Data Analysis Study Of Temperature Based On California Cooperative Oceanic Fisheries Investigations (Calcofi) Data., Afsana Mimi

Dissertations, Theses, and Capstone Projects

This research presents an integrated analytical framework for predicting ocean temperatures using long-term observations from the California Cooperative Oceanic Fisheries Investigations (CalCOFI) data files. The study applies advanced data engineering and statistical modeling to assess how a variety of indicators, such as salinity, dissolved oxygen, key nutrients, and ocean depth shape oceanic temperature patterns along the California coastline. Using Microsoft SQL Server software for large-scale data integration and the R for statistical packages (R Core Team, 2025) for statistical computation, I developed and compared multiple regression models, including the ridge regression model, to evaluate the relative influence of physical and …

Low-Cost Path-Loss Characterization For Underground Mine Tunnels Using Lora Transceivers At 915 Mhz, Hilary Kelechi Anabi, Samuel Frimpong, Muhammad Azeem Raza

Mining Engineering Faculty Research & Creative Works

Accurate path-loss models are essential for planning reliable wireless networks in underground mines, yet existing characterization studies rely on specialized channel sounders and vector network analyzers costing tens of thousands of dollars, placing them beyond the reach of most mine operators. This paper demonstrates that LoRa transceivers costing approximately US $15 per node can serve as a self-contained path-loss measurement instrument, logging the received signal strength indicator (RSSI) and signal-to-noise ratio (SNR) directly to a CSV file over a standard USB serial connection. A measurement campaign conducted at the Missouri S&T Experimental Mine on 31 March 2026 collected 4801 packets …

2–4 Ghz Reconfigurable Rf Filters, Jason Corn, Roman Junes

Electrical and Computer Engineering Senior Theses

Wireless communication systems employ radio frequency (RF) filters to isolate desired signals while suppressing interference and noise. Conventional RF filters rely on fixed-frequency architectures that restrict system operation in increasingly dynamic communication environments. This project features the design and optimization of a reconfigurable RF filter prototype using coupled microstrip resonators and electronic tuning components. The filter design demonstrates a tunable range of 2−4 GHz. Future design of reconfigurable microstrip architectures must take steps to maintain signal integrity across active elements. Power loss may be mitigated through the selection of higher quality factor components and less lossy prototyping materials.