Digital Commons Network^™

Feasibility Study Of A New Approach To Resolve Radar Range Bin Ambiguity, Donald Shue Yee

Retrospective Theses and Dissertations

This report describes the study of a new approach to resolve pulse radar range bin ambiguity problem. The nature and the cause of the problem are discussed, and various methods presently used to solve this problem are presented. The report points out the disadvantages of these methods and, thus, introduces a new approach to resolve the radar range bin ambiguity problem by examining the reasonableness of the trajectory of the object being traced. Necessary algorithm and computer programs to support the study are given in Appendices I, II, and III.

Saturated Enthalpies For Mixtures Of Propane And Propene, David B. Manley, George W. Swift

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.

Characterization Of Poly(Methyl Methacrylate) From Radiation‐Induced Polymerization In The Presence Of A Kaolin Clay Substrate, J. J. Beeson, Kenneth G. Mayhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Two types of polymer are formed in the radiation‐initiated polymerization of methyl methacrylate (MMA)–kaolin clay complexes. Homopolymer can be extracted from the complex by the use of organic solvents. Inserted polymer must be removed by dissolution of the polymer–clay complex with hydrofluoric acid. The polymers formed show no differences in structure (as determined by infrared analysis), had high molecular weights (1–5 x 106), and had similar molecular weight distributions (as determined by GPC). The molecular weights of the homopolymer increased as temperature increased (25°–75°C), and dose rate decreased (24.9–7.35 rads/sec). The isotacticity of the polymers when compared to irradiated bulk …

Experimental Study Of Neutron Reflection From A Cylindrical Surface, Dale Lee Holtzscher

Masters Theses

"The reflection patterns for an elliptical neutron beam impinging upon cylindrical and planar surfaces were measured. The flux intensity as a function of distance from the surface of either planar or cylindrical reflectors decreased monotonously with distance. No "focusing" of the neutron beam appeared in the case of the cylindrical reflectors but the flux did not decrease as rapidly as in the planar case. For the elliptical neutron beam the experimentally determined neutron flux distribution agrees with calculation"--Abstract, page ii.

Effects Of Cold Working Under Pressure On Subsequent Yield, J. G. Hoeg, Robert L. Davis

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A method utilizing high pressure fluid environments is described whereby a three-dimensional subsequent yield surface was determined for 304 stainless steel cylindrical parent specimens of this material were prestrained in axial compression under fluid pressure and then small sub specimens were sectioned from these parent specimens. Finite element techniques were used to optimize the parent specimen size so that a zone of uniform axial stress woidd result during the prestraining. Longitudinal strains in this zone were monitored during the prestraining and the subspecimens were cut from this region in a manner that did not allow the machining to appreciably affect …

A Management Training Game For Police Command/Control Officer Training, Charles R. Custer

Retrospective Theses and Dissertations

No abstract provided.

Analyses Of The Water And Wastewater Systems At Florida Technological University, Fred C. Jensen

Retrospective Theses and Dissertations

In searching for a subject to meet the M. S. Degree Research Report requirements, I had several objectives in mind. I wanted (1) a project with relevancy in the environmental field which would broaden my understanding of the environmental systems which I have studied, (2) a subject which would allow me to apply some of the Principles which I have learned in Operations Research , and (3) a project which had good practical application. With these objectives in mind, I reviewed the suggested topics presented by the Faculty and selected the FTU Water and Wastewater System Analyses topic which was …

An Investigation Of Methods For Reuse Of Rubber Tires, Charles Edward Armbruster

Retrospective Theses and Dissertations

Methods of reusing/recycling the more than 250 million automobile and truck tires which are worn out each year were investigated. The existing methods of reusing tires account for about 30 percent of the volume of scrap tires generated each year. These methods are, Retreading, Reclaiming (by reducing to ground up rubber and fiber), and Tire Splitting (stamp items out of sidewall and tread areas). Several possibilities for reusing/recycling the unused 70 percent were discovered. These methods are as follows: Destructive Distillation -- a method of recovering chemicals from tires by pyrolitic action. It is anticipated that eventually as much as …

The Relationship Of Textbooks To Development Of Course Content In The Teaching Of Small Gas Engines, Frank Demchuck

All Master's Theses

This study compares and evaluates the ideas and opinions of practitioners with the ideas and opinions of educational theorists. Information from the practitioners was gathered by questionnaire. Information from the theorists was gathered by a search of the related literature. The findings, showing the relationship or textbooks to the development of course content in the teaching of small gas engines, are presented and evaluated. A small gas engines textbook outline based on information gained from this study is also presented.

Design And Analysis Of A Phase-Locked Loop Suitable For Synchronization Of An Optical Receiver, Douglas Wayne Dreisewerd

Masters Theses

"The required synchronization of a dynamic crossed-field photomultiplier tube (DCFP) is accomplished by means of a phase-locked loop for which the salient feature is the use of the DCFP as the phase detector. This action is necessitated due to the unique sampling and phase focusing type of operation of the DCFP. The phase-locked loop is implemented by dithering the phase of the synchronizing RF drive signal, bandpass filtering the output pulses of the DCFP and using a synchronous detector at the dither frequency to determine the phase relationship between the incoming mode-locked laser pulses and the RF drive signal. The …

Investigation Of A New Type Of Cloud Condensation Nuclei Counter: The Thermal Quench Chamber, Donald Arthur Hess

Masters Theses

"The design and development of a new type of cloud condensation nuclei counter was undertaken to provide a new laboratory and field instrument that operates on a different theoretical basis than the thermal diffusion chamber now being used by meteorologists and other scientists. In the new instrument the test aerosol is pumped through a tube where it is first humidified and then cooled at constant pressure to create a supersaturation, causing water vapor to condense upon the nuclei in the aerosol sample. The concentration of cloud condensation nuclei is then determined by counting the water drops. The control of temperature …

Use Of Isotopes To Reduce Neutron-Induced Radioactivity And Augment Thermal Quality Of The Environment Of An Underground Nuclear Explosion, Nathaniel Fred Colby

Masters Theses

"The use of isotopes to include radioactive waste products to reduce the neutron-induced activity of an underground nuclear explosion and its application in the field of geothermal power stimulation is discussed. A shield composed of selected isotopes surrounding a fusion device will capture excess neutrons producing isotopes with short half-lives. Subsequent rapid decay will prolong the high temperature in the vicinity of the explosion and decrease the activity. Long-lived isotopes created by neutron capture in the host rock would be minimized. The investigation is conducted for strontium-90, cesium-137, cerium-144, technetium-99, rhodium-103 and -105. Of these, the first three appear to …

Design Of A Digital Control Unit For A Seismic Digital Tape System, Cao-Van Chung

Masters Theses

"This paper describes the interface between the NOVA digital computer and the Texas Instrument tape unit which handles field data recorded simultaneously from a maximum of 31 channels. The interface is the means through which the NOVA computer can control the tape unit and recover data. To provide necessary background information a review of the characteristics of the tape unit and the input-output operation of the NOVA computer are given. As the first part of the design, the general interface design is presented and the functions of its units are described. After discussion of functional assignment of each unit, coordination …

A Study And Design Of A Cardiac Interbeat Interval Timer System, Richard William Mooney

Masters Theses

"This thesis reports the design of a system which can measure and record the cardiac interbeat times of human subjects in a continuous beat to beat manner, using the bioelectrical signal associated with the heart as an input. The design is in response to the needs of clinical researchers.

The means of obtaining the bioelectrical signal and previous designs of electrocardiographic equipment, especially electrocardiotachometers, are reviewed. A design is proposed which consists of a preamplifier to amplify the bioelectrical signal, a 60 Hz rejection filter, and a beat detector which uses a differentiation technique to obtain a reliable single output …

Effect Of Glass Aggregates Upon Abrasiveness Of Asphaltic Mixtures, Dwarka Prasad Gupta

Masters Theses

"The utilization of glass as an aggregate in asphaltic concrete pavements has been suggested as a means for reusing the increasing amounts of waste glass generated each year in the United States. Recent studies have shown that asphaltic mixtures containing glass aggregates can be designed to meet Marshall requirements for stability, flow and void content but the abrasiveness of mixtures containing glass aggregates had not been investigated. The objectives of this study were to develop a laboratory wear testing apparatus and compare the abrasiveness of asphaltic concrete mixtures using glass aggregates with the abrasiveness of mixtures using several different conventional …

Toward Accident Reduction Innovations In Driver Education, Michelle Shapiro

JTRP Technical Reports

No abstract provided.

An Automated Student Advisement And Projected Course Enrollments, Brian Odell Montgomery

Retrospective Theses and Dissertations

One of the major problems of the modern university is the process of student advisement and course scheduling. The purpose of this paper is to write a computer program which will aid in solving this problem of student advisement and course scheduling for the undergraduate students of the College of Engineering at Florida Technological University. the computer program which is developed in this paper, aids in the problem of student advisement by producing a one page output for each student. This output page, which is separated by department, lists all courses the student has taken and passed, all transfer hours, …

The Great Salt Lake And Utah's Water Resources , Utah Water Research Laboratory

Reports

Introduction: It is appropriate to introduce these proceedings with a brief description of this history and objectives of the American Water Resources Association (AWRA). Quoting from a recent information borchure published by the AWRA, it is a non-profit, scientific organization that was incorporated in the State of Illinous in March, 1964, with headquarters in Urbana, Illinois. A major factor in the establishment of the AWRA was the need for an organization to encourage and foster interdisciplinary communication between professionals of diverse backgrounds working on all aspects of water resources problems. The principal objectives of AWRA are stated briefly as follows: …

Effects Of Land Use On Water Quality: Summit Creek, Smithfield, Utah, David W. Meyers, E. Joe Middlebrooks, Donald B. Porcella

Reports

The effects of various land uses on water quality in Summit Creek were evaluated during the period beginning March 13, 1971, and ending October 27, 1971. Potential sources of pollution investigated where: (1) septic tank use, (2) feedlot runoff, (3) urban runoff, (4) rural runoff. Samples were collected from five sampling stations on 16 separate days during the sampling period. Analyses were performed to determine the following constituents: ammonia, nitrite, nitrate, total phosphorus, orthophosphate, coliform bacteria, chloride, suspended solids, volatile suspended solids, total carbon, organic carbon, temperature, and pH. Agricultural activates, including livestock feedlot operations, were identified as the major …

The Plasma Polymerization Of Vinyl Monomers. I. The Design, Construction, And Operation Of An Inductively Coupled Plasma Generator And Preliminary Studies With Nine Monomers, L. F. Thompson, Kenneth G. Mayhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

An apparatus was constructed which would allow vinyl‐type monomers (and others) to polymerize at ambient temperatures in the presence of an inductively coupled RF field. The details of the construction of the system are reported along with preliminary results obtained from nine monomers: styrene, methylvinyldichlorosilane, vinyl acetate, acrylonitrile, vinyl fluoride, 1,1‐difluoroethylene, vinyl chloride, ethylene, and 1,3‐butadiene. Copyright © 1972 John Wiley & Sons, Inc.

Secondary Techniques For Increasing Fault Coverage Of Fault Detection Test Sequences For Asynchronous Sequential Networks, Lewis Ronald Hoover

Doctoral Dissertations

"The generation of fault detection sequences for asynchronous sequential networks is considered here. Several techniques exist for the generation of fault detection sequences on combinational and clocked sequential networks. Although these techniques provide closed solutions for combinational and clocked networks, they meet with much less success when used as strategies on asynchronous networks. It is presently assumed that the general asynchronous problem defies closed solution. For this reason, a secondary procedure is presented here to facilitate increased fault coverage by a given fault detection test sequence. This procedure is successful on all types of logic networks but is, perhaps, most …

Performance Comparison Of Receivers Designed To Combat Intersymbol Interference Due To Specular Multipath, George H. Smith

Masters Theses

"Bit error probabilities for biphase transmission have been computed for a known two-component multipath channel with a variety of suboptimum receivers. Performance curves are presented for each receiver, and the relative performance is summarized. Degradation due to imperfect channel knowledge is calculated, and the feasibility of countering this interference with these specially designed receivers is discussed"--Abstract, page ii.

Analysis And Measurement Of A Zener Diode Voltage-Reference, Armond C. Maxeiner

Masters Theses

"Output voltage sensitivity equations are derived for a zener voltage-reference circuit. The circuit consists of a DC-DC converter, a voltage-resistor current generator, and a zener diode. The performance of the voltage-reference is calculated using the sensitivity equations and compared to measurement data taken from a laboratory model of the circuit. The results are in reasonable agreement.

It was concluded that with careful selection of components, two of three major sources of error can be predicted and controlled; these are changes due to input voltage and changes due to temperature. The third, changes due to time, requires calibration against a voltage …

Digital Registration Of Stereo Images Using The Fast Fourier Transform, Victor Francis Wilreker Jr.

Masters Theses

"The exact alignment of multispectral imagery is a requirement of any image classification system. This investigation develops a system of programs which result in a technique that corrects for the translational and rotational misalignment of two images. Rotational and translational components are determined by using the fast Fourier transform to find the points of maximum correlation between the two images. The registration of two equal but misaligned boxes is given as an example of how the transform technique is used in correlating the images. The results of registering two digitized images that were obtained by scanning a pair of color …

Computer-Aided Circuit Optimization Including The Adjoint Method Of Calculating Network Sensitivities, John Walter Olson

Masters Theses

"A complete discuss ion of the optimization of a circuit, including modeling and programming difficulties encountered, is presented. A three transistor bandpass filter is used in order to study various methods of optimization. The adjoint method of calculating the network error gradient vector is compared to the perturbation method. The adjoint method proves to have decided advantages over the other method. A generalized computer program is presented to carry out the Fletcher-Powell optimization algorithm with specialized subroutines which include a network equation solver and both methods of finding the gradient vector. The program proved very effective in realizing a desired …

Data Compression Design Considerations For Airborne Test Vehicles, Kenneth Carlyle Pittman

Masters Theses

"The design goals for a data compression system are developed using previous studies as a cornerstone. Sampling theory is touched on with qualitative coverage of its effects. Consideration is given to various methods of data compression with the advantages and disadvantages of each noted. The requirement for buffering is discussed along with various methods that may be employed to achieve specific buffering goals. The impact of data reconstruction and how it may affect the choice of compression techniques is briefly covered. Selected compression algorithms and ways of increasing system effectiveness through alterations to their basic structures are described in detail. …

A Study Of Fmfb Demodulator Operation In The Presence Of Radio Frequency Interference And Gaussian Noise, Terry D. Wormington

Masters Theses

"A digital computer model of an FMFB demodulator has been used to study the effects of radio frequency interference on the detection of a sinusoidally modulated carrier. The effectiveness of selecting the feedback factor to suppress the interference for three values of modulation index is investigated. Also, the required IF bandwidth for the minimization of the mean-square error of the loop output between a signal corrupted by interference and the same signal without interference was investigated. More work is required before the effects of Gaussian noise plus interference on loop operation can be ascertained"--Abstract, page ii.

An Engineering Analysis Of Fluid Amplifiers And Development Of An Air Velocity Sensor, Gian Sagar Aneja

Masters Theses

"Fluidics, the new control technique finds its use amongst the conventional electronics and pneumatics due to some of its impressive features. Selected literature about bistable and proportional amplifiers has been presented for better understanding of the element behavior. Sensors; typical applications of fluidics have been described separately. An air flow velocity sensor has been set-up. Basically it consists of a cylinder placed across the air flow that sheds vortices in the wake due to 'Von Karman Vortex Street' phenomenon. The frequency of vortices gives a measure of velocity. The velocities obtained from the sensor have been compared to the ones …

A Practical Approach To The Exhaust Silencing Of A Pneumatic Rock Drill, Morton Gary Barth

Masters Theses

"One-third octave spectrum analyses of the exhaust noise produced by a medium sized pneumatic rock drill were obtained during free recriprocation to determine the most troublesome bands of noise. Noise reduction techniques were then used to design exhaust mufflers which would reduce the level of the exhaust noise to an acceptable level with a minimum increase in back pressure. The prototype mufflers evaluated included an expansion chamber, a resonator, and various modified expansion chambers. One of the modified expansion chambers tested provided very good attenuation reducing the exhaust noise from 113 dBA to 87 dBA at the operator's ear position. …

Use Of Glass Separated From Municipal Refuse In Asphaltic Concrete, Thomas Eugene Keith

Masters Theses

"The recent interest in municipal refuse recycling has brought about the development of several systems for separation of the refuse into components. One of the components reclaimed is a glass-rich fraction which, although primarily glass, contains various non-glass materials which the system is not able to remove. Clean waste glass can be used as an asphaltic concrete aggregate, and it would be desirable to use this glass-rich fraction in a similar manner. However, the effect, if any, of the non-glass components on the properties of an asphaltic mixture must be determined in order to utilize the glass-rich fraction with a …