Digital Commons Network^™

"Before" Evaluation Of Economic Growth Center Developmental Highway (Ky 55, Campbellsville-Lebanon), Joseph T. Farmer, Jerry G. Pigman

Kentucky Transportation Center Research Report

Before-and-after impact studies were selected as the means of determining the effect of reconstructing a 4.813-mile (7.744-kilometer) section of KY 55 between Campbellsville and Lebanon. The area, though still depressed in terms of per capita income and employment, has many resources available for growth. The study area is predominantly an agriculturally-oriented economy. However, manufacturing employment has increased in recent years, mainly because of industrial sites made available by local industrial commissions.

Overall, social services appear to be adequate and very near statewide averages. Recreational facilities are not highly developed and are primarily of the summer outdoor type.

Reconstruction of KY …

Electronic Color Scanners, Kenneth Francis Hird

Graduate Research Papers

Process color photography has been continually developing for many years. In fact, color printing techniques are still benefiting, through additional sophisticated requirements, and from a discovery made about 300 years ago. At that time Sir Isaac Newton, British scientist, mathematician • and philosopher, placed a glass prism in the path of a narrow beam of sunlight entering his room through a pinhole in an opaque window shade. He determined that ordinary white light is a mixture of colored lights.

Unfortunately, in practice, ideal pigments for three-color inks do not exist and this impasse greatly complicates the job for the photo-processor. …

Optimal Planning Of Fixed Route Bus Transit Systems : A Systems Approach, Young Lee

Dissertations

A new bus transit planning tool is developed for application in determining operating policies of a fixed-route bus transit system. The objective of the study is to model a bus transit system which functions under time-varying passenger demands and service characteristics.

The two phase transit model developed in this research is intended for use as a mass transit planning tool, to solve transit problems confronting the mass transit planner. The model is used to compute cost differentials in transit system options. These alternatives of expanding, abandoning or modifying service depend upon the service frequency, fleet size and other system attributes …

Design For A Developing Consortium, Henry A. Mauermeyer

Theses

The number of consortia in American higher education expanded rapidly from only ten in 1960 to eighty in 1973. Many do not have an organized method of developing interinstitutional cooperation, structuring their internal management, or preparing to meet future expansion.

The design of an organizational process appropriate to consortia in general has been developed in this thesis. The design is based on an analysis of various materials: (1) literature on the consortium movement; (2) data gathered from a nationwide survey conducted by the author; (3) visits with directors of consortia and experts in the consortium field; (4) actual working experience …

"Before" Evaluation Of Economic Growth Center Developmental Highway (Us 25e: Corbin-Barbourville), Joseph T. Farmer, Jerry G. Pigman

Kentucky Transportation Center Research Report

Before-and-after impact studies were selected as the means of determining the effect of reconstructing a 4.886 mile (7.862 kilometer) section of US 25E between Corbin and Barbourville. A comprehensive analysis of the "before" statistics revealed the area designated as a potential growth center suffered from social and economic mediocrity. Many characteristics considered essential for economic prosperity are lacking. Per capita income and educational achievement levels are lower than statewide averages. Transportation is dependent upon highways and many existing routes provide a very low level of service.

On the other hand, the area has adequate industrial and recreational potential to insure …

A Rock Evaluation Schema For Transporting Planning In Kentucky, C. D. Tockstein, M. W. Palmer

Kentucky Transportation Center Research Report

The initial goal was to devise an engineering classification system for intact rock samples based on simple index tests which could be used to categorize Kentucky surface and near-surface rock types and assist Kentucky Department of Transportation personnel in planning for transportation facilities. While conducting the literature survey, several facts become apparent:

1. a large number of rock classification systems, geologic and technical, general and specific, already existed;
2. an equally large number of index tests had been devised; and
3. there was a lack of communication among those involved in specialized areas of rock-related work (geologists, civil engineers, mining engineers, etc.), and, …

Electronic Ignitions, Leo A. Green

Graduate Research Papers

It is the purpose of this study to (1) review all available literature on electronic ignitions; (2) study the function and application of electronic ignitions; (3) determine the advantages of a capacitive-discharge ignition system over a conventional system; (4) develop an instructional unit around the function and application of electronic ignitions; and (5) prepare a written and oral report on electronic ignitions.

Prospects For Conversion Of Solar Energy Into Electrical Power, William R. Cherry

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

In 1972, the Solar Energy Panel took a broad look at solar energy across the whole field to see just what could be done with this energy source. Maybe the era of acquiring energy without regard to cost and without regard to consequences of using it is beginning to come to a close and maybe we ought to start looking at the newer sources of energy, even though we need every bit of energy we can get from every source. I am not trying to say we don't need gas, oil, coal and nuclear energy. We are not going to …

Prospects For Nuclear Fusion Power, William C. Gough

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The prospects for fusion power are discussed including the need for fusion, its environmental advantages, and the research results that form the basis for present confidence that the program will succeed. The steps remaining before commercial fusion power will be available are outlined. Exploratory ideas for second generation fusion electric power plants, and non electrical applications of fusion technology and reactors are briefly covered.

Oil Shale And Its Potential Utilization, G. U. Dineen

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The large deposits of oil shale in the Green River Formation in Colorado, Utah, and Wyoming offer a potential source of significant quantities of liquid fuels. This paper discusses the location and potential of the resource; the present state of technology for producing shale oil by both aboveground and in situ processes; the characteristics of shale oil; environmental aspects of oil-shale utilization; and recent developments, particularly results of the Department of the Interior’s Prototype Oil Shale Leasing Program, that suggest inauguration of commercial oil-shale processing.

The Associated Electric Cooperative Energy Control System, Douglas W. Arlig

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Associated Electric Coop, installed a digital computer energy control system in 1971 to improve the economics and security of its power system operation. Since its initial implementation, the new energy control system has been undergoing a continuing evolutionary process. The addition of new data acquisition systems, improved man-machine interfaces, and the development of new, more sophisticated application programs has helped bring the system closer to its goal of reliable, secure, and economic power system operation.

This paper describes Associated's energy control system as it was originally installed, as it is currently operating today, and as it is currently envisioned to …

Oil Spill Containment And Removal In Arctic Ecosystems, Wilfred R. Mcleod, Diana L. Mcleod

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Statistics on 16 arctic and subarctic oil spills, their locations, the amount of oil spilled, combatant schemes used, and causes for the spills were culled from the literature. This information has been used to analyze the effectiveness of available chemical, mechanical, and destructive means of oil recovery or disposal under arctic and subarctic conditions.

The choice of the best cleanup procedures to follow in any particular instance is clouded by a number of variables and must be weighed against such considerations as wind, sea, and ice conditions, properties of the oil, and effects of chemicals on marine and wildlife. Access …

Uniroyal's Approach To Energy Management, J. C. Madigan

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Uniroyal makes selected consumer and industrial products including chemicals, plastics, and rubber articles in 90 plants worldwide. About 90% of raw materials are petroleum-based and about $40 million will be spent on energy in 1974.

Energy management includes centralized monitoring and feedback of usage per unit of production at all factories; energy audits; educational programs; suggestion systems; operational, maintenance, and capital investment programs. Specific items are detailed. Organization places responsibility on Divisional Coordinators backed by President and Divisional Vice Presidents, coached and assisted by Corporate Coordinator and Engineering Specialists. Results in 1973 were very encouraging.

Monsanto's Energy Conservation Program, Ray E. Doerr

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Energy conservation is not new to Monsanto. We have had utility and process improvement programs for many years. But the motivation of these programs was to reduce our operating costs and improve profits. However, these programs did result in substantial energy savings.

Now, however, Monsanto is placing major emphasis on a broad-scale energy conservation program for all Monsanto locations. The energy saving potential is great and is necessary because of the energy shortage as well as the rapidly escalating energy costs.

Energy Conservation In The Manufacturing Process, Paul H. Kaiser

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

My presentation will cover the basic procedure used by the Emerson Electric Co. to conserve energy in Its operations. And because people frequently tell me how much they like or dislike our television sets, and how concerned they are or are not about the depth of our involvement in furnishing material for the Defense Department, at this point I would like to give a short commercial. Hopefully, it will dispel misconceptions, and define the use of energy in Emerson's operations.

An Advanced Supervisory Indication, Control & Data Acquisition System, George W. Fox

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Electric Utility systems in the United States double in growth every ten years. This growth necessitates the construction of substations in new areas and expansion of substations in existing areas.

Troubles quite often cannot be quickly and accurately diagnosed until a sufficient number of calls have been received from customers to establish a pattern.

This paper will describe an advanced supervisory system utilizing latest state-of-the-art electronic equipment interfaced with digital computers to provide the trouble dispatcher with a rapid update as to the status of his system at all times. He will also be able to remotely control his system …

Development Of Industrial Energy Management Programs, Michael C. Noland

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Energy management is a term which has only recently been entered in the business management lexicon. Until recently business managers, even the most successful ones, devoted only casual thought to the need to manage their use of fuels and electricity. Energy was cheap and plentiful. Economic sense dictated that if labor could be replaced by more energy-intense processes or equipment, the smart manager did so. Local and national policy, industrial process design, consumer habits--all these and more encouraged massive energy consumption.

1st Umr-Mec Conference On Energy Resources -- Entire Proceedings, University Of Missouri--Rolla

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

No abstract provided.

Multiregional Interactions Between Energy And Transportation, Karen R. Polenske

Applications

Because of the number and complexity of the issues that will determine the use of coal by the electric-generating plants, an important asset of policy makers will be the availability of a method of analysis that allows for quick studies of many different combinations of assumptions and policies. The present prototype study is designed to show how the multiregional input-output model can be used to investigate each different assumption and policy alternative. For this paper, the analysis has necessarily been restricted to two issues. First, the results of using regional rather than national technologies in the model are assessed. This …

Dynamic Childbirth Simulator For Teaching Maternity Patient Care, Charles F. Knapp, George S. Eades

Biomedical Engineering Faculty Patents

A programmable patient simulator for teaching maternity patient care includes a life size manikin with a pelvis, vaginal canal, uterus, placenta, umbilical cord, and a fetal doll from which heart sounds are emitted. A programmable electro-pneumatic system controls the simulated uterine contractions, position of the uterus, rupture of membranes, expulsion of fetal doll, and fetal heart rate during labor and delivery sequence.

Historical Sketch Of Tractor Testing, Nebraska Tractor Test Lab

Nebraska Tractor Tests

A historical sketch of Tractor Testing at the University of Nebraska-Lincoln. Lester F. Larsen. Engineer in charge since 1947, visits with George S. Round, Professor of Agricultural Communications at the University about individuals who made contributions to the successful program. He also reports on 1,155 tests conducted up to January I, 1974, and contrasts tractors of 1974 with those of 20, 30 or more years ago . Testing fee schedules are reviewed in a self-supporting project favorably known round the world.

Ua66/1/2 Scrapbook, Wku Ogden College Of Science & Engineering

WKU Administration Documents

Scrapbook of clippings, press releases, photographs and other items related to the history of Ogden College of Science & Technology from 1961 to 1974.

Noise Power Estimation Based On Data Of Finite Sample Size., John Michael Koly

Masters Theses

"The method of z-transforms is used to derive the error performance of an average noise power estimator that utilizes data of finite sample size. Rectangular and trapezoidal integrators are employed by the estimator. Theoretical performance of each integrator is derived as a function of the number of samples utilized to form the estimate"-- Abstract, p. ii

Design Of An Auxiliary Indicator For A Fighter Aircraft., Jack L. Kubicek

Masters Theses

"The auxiliary indicator discussed in this thesis is the unit which processes signal information for a radar display indicator. The indicator provides system information to a fighter pilot in an easy to read and uncluttered manner.

The indicator displays symbols, target and advisory information for the pilot. The symbols and target information are displayed on a direct view storage tube (DVST), while pilot advisory information is displayed by means of indicator lights located around the perimeter of the display.

This thesis describes the original steps of development, starting with the original consideration of the problem and possible methods for solving …

A High Speed Pulse Code Laser Diode Modulator, John Lawrence Mcdonough

Retrospective Theses and Dissertations

This research report reviews the basics of pulse code modulation (PCM) techniques and includes a special encoder design for a system which uses a laser diode output for the transmitted pulse. The text discusses PCM and its features, PCM formats, synchronization, and various accepted PCM codes. The encode circuit design is complete with a description of the circuit, circuit components, and operation. Included are the necessary diagrams, figures, specifications, and parts list. The transmitted output of the design circuit has a repetition rate of one megabit per second.

A Proximity Vehicle Locator System, Bradley Everett Thompson

Retrospective Theses and Dissertations

The purpose of this paper is to discuss the design, construction and operation of the proximity vehicle locator system prototype developed for the Orlando Police Department. The objective of the project itself was to provide the O.P.D. with a simple but effective system by which constant surveillance of patrol car locations could be maintained, thus improving the department's operational efficiency. Each unit designed specifically for use in this project will be discussed in some detail, while those purchased locally for use in the project will be only briefly described, as pertaining to their functional importance to the system. In addition, …

Development Of A Remote Sound Monitoring System, Joseph Owen Ellis

Retrospective Theses and Dissertations

This report explains the development of a sound measuring system for continuous monitoring of sound levels. Dedicated telephone lines are used for data transmission so that sound level data can be monitored at installations far from the area of concern. This allows the sound sensing equipment to be left unattended and thereby greatly reduces the manpower costs of operation. That predetermined data conditions can be detected when they occur and corrective action can be taken immediately at the data receiving installation further justifies the method used. Background information and general need for such a system are discussed. Growing public concern …

Recommendations For Implementation Of Uniform Project Identification From The Upi Task Force, Herbert F. Southgate

Kentucky Transportation Center Research Report

For years project identifications have been based upon county, section, subsection, and phase of work. While this system worked well in the beginning, overlay constructions, widening efforts, etc. have caused overlapping of projects to the point that identification of a given portion of a highway has become very difficult. Furthermore, each of the many separate phases of work has its own project number and may not be so readily identifiable as the succeeding work phase.

Management came to realize there was a need for a numbering identification system that would be readily understandable. The direct result was the development of …

Statistical Modelling Of Computer Systems: A Survey, Amrit L. Goel, Anand M. Joglekar

Electrical Engineering and Computer Science - All Scholarship

This paper briefly surveys the data dependent statistical methods useful for computer systems modelling. The techniques are classified according to their applicability toward comparison, tuning and design of computer systems. A review of papers dealing with statistical modelling of computer systems is presented and a comprehensive bibliography is included to provide a useful source of reference toward the present and potential applications of statistical methods for computer system modelling.

Electronic Contribution To The Entropy Of Solution, Manfred Wuttig

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.