Digital Commons Network^™

Robotization For Assembling Small Parts, Frank J. Valese

Theses

The thrust of this paper is directed toward establishing a roboticized small parts assembly line where none currently exist. Technical and pragmatic requisites were established and reviewed prior to installing the proposed robotic workcell. Although the specific model chosen for discussion is the locksmithing industry, the procedures followed, the design tools utilized, and the methods of job-costing employed apply equally to other small parts industries.

Basic industrywide considerations reviewed for each robotization effort included:

1. Choosing the proper application for robotization
2. Obtaining management support and labor input to insure the success of the project
3. Deciding on the economic and production goals …

Acuta Enews November 1987, Vol. 16, No. 11

ACUTA Newsletters

In This Issue

President's Message

Party Line

Eight Action Points For Telco Execs

US West unit signs US Sprint to card validation service

Critical Issues in Premises Cabling

Need a Consultant? Here's Why, When

Surface-To-Surface Transition Via Electromagnetic Coupling Of Coplanar Waveguides, Robert W. Jackson, David W. Matolak

Faculty Publications

A transition is investigated which couples coplanar waveguide on one substrate surface (a motherboard) to coplanar waveguide on another substrate surface (a semiconductor chip or subarray) placed above the first. No wire bonds are necessary. A full-wave analysis using coupled line theory is presented and verified experimentally. The use of this transition for coupling to millimeter-wave integrated circuits is discussed.

Transient Stability Simulation By Waveform Relaxation Methods, Marija D. Ilić, M. A. Pai, Mariesa Crow

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a new methodology for power system dynamic response calculations is presented. The technique known as the waveform relaxation has been extensively used in transient analysis of VLSI circuits and it can take advantage of new architectures in computer systems such as parallel processors. The application in this paper is limited to swing equations of a large power system. Computational results are presented.

Load And Communications Balancing On Multiprocessor Logic Simulation Engines, Ken Wong, Mark A. Franklin

All Computer Science and Engineering Research

The problem considered in this paper is to find an assignment of logic components to processors which will achieve logic simulation speed-ups approaching the ideal for large processor populations. This problem becomes particularly important when a significant portion of the speed-up expected from logic simulation engines is attributed to load sharing (as opposed to obtaining speed-up by employing specialized hardware to carry out specific tasks associated with the simulation process such as event queue manipulation or function evaluation). Our research considers this problem for a particular multiprocessor simulation architecture for which a performance model has bene developed. The model is …

Santa Clara Magazine, Volume 30 Number 1, Fall 1987, Santa Clara University

Santa Clara Magazine

10 - CAN THERE BE DISSENT IN CATHOLIC UNIVERSITIES? SCU's president makes clear where the University stands on this important issue. By William J. Rewak, S.J.

17 - WHAT'S AHEAD IN THE WORLD OF HIGH TECH? Former Business ~ek reporter Jack Wilson looks to the future of Silicon Valley.

21 - GREEKS ON CAMPUS-HERE TO STAY? What makes sororities and fraternities appealing to SCU undergraduates?

28 - GLASS IMAGE Tom Kelly '72 unlocks memories of classmate Charlie Glass after Glass's abduction last June.

30 - THE AGE OF AQUARIUS REVISITED Six members of the class of '67 talk about their …

Irish H & V News

Building Services Engineering

No abstract provided.

A Theoretical Investigation Of The Possibility Of Coexistence Of Three Microbial Populations Competing Purely And Simply In Configurations Of Three Interconnected Chemostats, Shiuan-Wu Chang

Theses

It is known from the literature that out of any number of microbial populations competing purely and simply in an environment which is homogeneous and has time invariant inputs (e.g. in an ideal chemostat) only one population can survive in a steady state under any conditions. However it has been proven possible for two competitors to coexist in two interconnected chemostats, which indicates that spatial heterogeneities may lead to coexistence of pure and simple competitors. The present study investigates whether the spatial heterogeneities created by three interconnected bioreactors may lead to a mixed culture (i.e. coexistence) of three pure and …

Development Of An Off-Line Robot Programming System For Computer Control Of Ge P50 Robot, Subhas Vitthal Shetty

Theses

The General Electric P50 Robot has Teach Pendent Programming facilities. It is provided with a Computer Linkage - a communication control unit, but is not eguipped with any software which uses this linkage to communicate data between the computer and the P50.

A study was made of many Robot Programming systems existing today. The facilities a programming language should have was noted, and a Robot-Level Programming System was developed, which remote controls the P50 robot.

The program is written in TurboPascal and is developed on IBM PC/AT for communication between the P50 and an IBM PC Compatible Personal Computer. The …

Evaluation Of Word Processing Cost Effectiveness, Nicholas E. Tedesco

Theses

The objective of this thesis is to examine the use of word processing technology to determine if its implementation is a cost effective investment. This will be accomplished by comparing the cost of a typewritten page before and after the implementation or upgrade of word processing equipment. The degree of utilization and the impact of utilization on standard costs will also be examined.

Significant difficulty was encountered attempting to locate and compile statistical information on word processing. Therefore, a questionnaire was developed and distributed to the 100 largest public and 100 largest private companies headquartered in New Jersey, requesting information …

Application Of Robots In Developing Countries, Badi Uddin

Theses

The increasing versatility of robots has led to their use in a widening range of applications. The robot population is growing at a remarkable pace. The increase in the use of robots in industry has changed the standards of productivity and quality. During past years, as labor costs has risen, safety and environmental regulations have been changed to provide more benefits to workers and capabilities of robots became more sophisticated. Therefore, robots became a valuable piece of production equipment.

Now, robots are able to perform all kinds of hazardous and heavy duty jobs which are harmful to human life or …

Acuta Enews September & October 1987, Vol. 16, No. 9 & 10

ACUTA Newsletters

In This Issue

Back to the Future: The Power of 1A2

Party Line

Potpourri

Equal Access Reaches 84% of America

Computered-Aided Digital Filter Design And Simulatio, Pao-Tsan Chiang

Theses

The simulation is written by C language on AT&T Unix pc 7300 environment, some fundamental mathematics is introduced in the beginning, then digital filter specification method: window, frequency sampling, equiripple are discussed, and Kaiser window method is discussed in details for programming.

There are many problems are met in my simulation, such as F.F.T. aliasing, leakage, Picket fence convolution, correlation, but solutions are proposed.

The result could be output data and graph, GSS_Drivers graph package is utilized, because consideration of operation speed and convenience are emphasized, speed is compromised, but easy to be restructured.

A Dsp Toolkit For The Unix/C Environment Of The Pc 7300 Compute, Suwutchai Jesdanun

Theses

The Digital Signal Processing (DSP) TOOLKIT is a package of programs designed to use the fast Fourier transform (FFT) and display its output responses in graphics form. This tool provides three different window functions and five data modifiers for filter designing and spectrum analysis. Flexible features for modifying the plottings, such as y-axis auto-scaling, xy-axis scaling and center line adjusting of the graphics display, are included.

All programs are written in C programming language for the UNIX System Environment of the UNIX PC 7300 computer. The program structure of DSP TOOLKIT is designed so that modules can be added or …

A Prognostication Of Just-In-Time Efficacy In American Manufacturing, Mark L. Kahan

Theses

"Just-in-time" is a Japanese philosophy of business management which has as its ideal the complete elimination of waste in the process of adding value to a product. Some experts have contended that its basis is not cultural, but technical, and is thus applicable to American manufacturing concerns. After an initial exploration of economics and productivity concepts, and of U.S. logistics, inventory, and purchasing practices, the matter of Just-in-time will be addressed, both theoretically and in terms of Japanese business and labor relationships and culture. Then, based upon a case study consisting of observations made at a traditional American manufacturer, this …

Advanced Communications Systems, Jonathan S. Turner

All Computer Science and Engineering Research

The Advanced Communication Systems Project is concerned with new communication technologies that can support a wide range of different communication applications in the context of large public networks. Communications networks in common use today have been tailored to specific applications and while they perform their assigned functions well, they are difficult to adapt to new uses. There currently are no general purpose networks, rather there are telephone networks, low-speed data networks and cable television networks. As new communications applications proliferate, it becomes clear that in the long term, a more flexible communications infrastructure will be needed. The Integrated Services Digital …

The Development Of Technical Instructional Materials For Industrial Technology Students, David D. Bradney

Graduate Research Papers

The purpose of the research was to develop a usable reference document for graduate students, graduate assistants, undergraduate students, and others who must write technical instructional materials.

Acuta Enews August 1987, Vol. 16, No. 8

ACUTA Newsletters

In This Issue

President's Message

Party Line

PBX Helps University Provide Voice and Data

The Dangers to your Telecommunications System

Bulletin - August, 1987, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A four page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

The Relationship Between Linguistic And Image Based Learning Approaches For Complex Problem Solving: A Case For Computer Generated Animation In Instructional Presentation Of Complex Technical Processes, Stanley T. Bissinger

Graduate Research Papers

The purpose of this study is to provide a rationale for development of new approaches to educating students about complex technical processes. This study may also prove helpful for determining what type of technical content is better suited for computer animated presentation.

An Investigation Of The Uses Of Scanning Electron Microscopy In The Analysis Of The Substructure Morphology Of Semiconducting Devices, Michael E. Courbat

Graduate Research Papers

The purpose of this study is to determine the technical requirements of SEM failure analysis in regard to its' inclusion in the Energy and Power curriculum of the Department of Industrial Technology, University of Northern Iowa.

Acuta Enews July 1987, Vol. 16, No. 1987

ACUTA Newsletters

In This Issue

Stanford University switches to the Meridian SL-100

The Broadband Cable Network

Party Line

Microcomputers Found More Available -and More Often Required -at Selective Colleges

Software Tools For Performance Evaluation Of Concurrent Processing, Rodrogo A. Obando

Electrical & Computer Engineering Theses & Dissertations

The development and use of software tools for performance evaluation of concurrent processing is presented in this thesis. The particular concurrent processing architecture proposed by Stoughton and Mielke is investigated. The modelling of this architecture is based on Petri net theory and it can be studied making use of circuit theory. Computation of lower bounds for Time Between Outputs (TBO) and Time Between Input and Output (TBIO) can be accomplished by using principles of circuit theory, among others. This new modelling needs to be deeply evaluated and studied. This evaluation and study is accomplished with the tools developed and presented …

Structural Sensitivity Analysis On A Parallel Computer, Niu Kian Teck

Civil & Environmental Engineering Theses & Dissertations

Substructuring formulation using adjoint variable approach has been developed for design sensitivity analysis and optimization of large scale structures. In this study, the procedure for statics and sensitivity analysis are re-examined to propose a programming scheme which can be implemented either in a sequential or parallel environment. The computational times of the substructuring formulation using a single processor versus multi-processors are compared to see the effectiveness of the formulation in the concurrent computing environment.

Expanding The Automated Centralized Control System At The Des Moines Area Community College, Mark David Baethke

Graduate Research Papers

DMACC currently has over $1,200,000 invested in the ACCS which is connected to 21 campus buildings. The ACCS is used to save an estimated $300,000 per year in energy costs through energy conserving control of heating, ventilating, and air conditioning equipment. The ACCS also improves building life safety functions through fire alarm monitoring and serves as a significant trouble shooting tool for the mechanical maintenance staff. The initial installations of the ACCS were done after lengthly audits and studies by professional consulting firms which resulted in the recommendations for installation and expansion. These studies were limited to only a few …

A Computer-Aided Design And Manufacturing System For Wiring Boards Production, Shiau Chia-Ming

Theses

Our purpose is to build some SBC-8052-BASIC microcontroller based instrument systems, and this thesis integrate resources from two areas into a powerful CAD/CAM system for this purpose. Since wiring board is the most popular used tool for laboratory development and small-scale manufacturing, a microcomputer-aided design and manufacturing system is developed to improve the whole efficiency from wirelisting and wiring sequences to hardware and software debugging. So anytime a circuit theory design stage is finished, the prototype can be made easily, then tested and redesigned, till last stage producing. Several practical wiring board circuits have been made through this system, it …

Microcomputer-Based Automated System To Monitor Flow And Respiratory Quotient, Chung C. Chien

Theses

An instrument system has been designed to monitor Respiratory Quotient experiments on rats which are living within whole-body calorimeters. By using multiplexing techniques, this system is capable of monitoring Respiratory Quotients in six calorimeters (animal chambers). It exhibits some features that make it more versatile than the previous system. One of the features of this instrument is that it uses a more accurate method of determining rapid changes in gas exchange between subject and environment. The value of this method is its ability to assess the rapid change in metabolic rate which occurs as a result of change in activity, …

A Data Compression System Using Arithmetic Code, Seokrim Choi

Theses

Generally it is difficult to compress data, from statistically unknown sources, with significant compression ratio. To achieve this, the compression scheme should have an ability to gather context information of the source, adaptively. For better compression, it is desirable to separate the context gathering scheme from coding itself. Arithmetic code is very flexible and can accept any kind of context gathering scheme which can generate probabilities. One context gathering algorithm which generates Markov type probability adaptively is studied and implemented in software using Arithmetic code. This scheme performs well and results in compression ratio better than any existing algorithms such …

Ksc2408 Digital Filter Evaluation System For The Ecg, Chi-Tong Chung

Theses

A hardware implementation in digital filters by using the high speed and high precision KSC2408 digital filter chips, demonstrates the power of the KSC2408 and proves that the real time digital filters can be implemented without complex circuitry and without high expense.

The system consists of two parts - the digital filter board and the IBM PC; the former handles the data filtering, the latter handles the analog-to-digital data conversion and data display. The KSC2408 is programmed as a 16th order Butterworth digital filter to have flat response in the passband and good attenuation in the stopband.

Recruitment Of Engineers In A Small Company, Robert Cohen

Theses

With most recruitment techniques written for large companies, recruitment of engineers in a small company may be a large problem. A detailed analysis of the engineering employer and employee is constructed making note of large and small company differences. A survey was taken and the results are presented in support of the authors opinions. A generic recruitment technique is also presented, followed by modifications or other considerations to that technique. This should increase the available applicant pool and optimize quality levels of the engineering candidates for the small company.