Digital Commons Network^™

Development Of 8052ah-Basic Based Single Board Computer Ii, Suping Lou

Theses

8052AH-BAISC Based Single Board Computer II ( SBC II ) is designed and developed for the application in biomedical instruments as an embedded central processing unit. SBC II offers powerful function in digital signal acquisition, storage and processing, smart on-board EPROM programming, various preipheries supporting and custom supervisor program. The techniques of design and development of SBC II includes computer aided circuits analysis and schematic, optimal design algorithms and computerized setting up SBC II prototype.

This thesis combines the analysis of SBC II circuitry, set up and operation of the complete computer aided electrical circuit design software OrCAD/SDT specifics in …

Design Of Bridge Inter-Connecting Token Ring & Token Bus Local Area Networks, Kasinath Anupindi

Theses

A Bridge interconnecting two Local Area Networks has been modelled. The two interconnected networks are the Token Ring and the Token Bus LANs. Concepts of Queueing theory have been employed in the design. Initially it is assumed that the buffer size at the Bridge is infinite. Further it is assumed that the arrival rate of the messages is Markovian and the service rate is General, Le it is an M/G/1 system. Expressions for the average waiting time at the Bridge and the size of the buffers is computed. Graphs for various parameters have been plotted. Based on these graphs the …

Reliability Evaluation Of Liquid Crystal Displays Under Accelerated Test Conditions, Ishatdev Singh Rathore

Theses

This thesis deals with the recent study of reliability of liquid crystal displays. This study determined the effects of high temperature on LCD reliability. To accomplish this, reliability life testing was done on different kinds of LCD samples under different operating conditions. The tests were carried out on the samples of two different vendors at two different temperatures. No humidity was added in any test.

Vendor No. 1

1. 120 units at 77° ± l° C.

2. 80 units at 85° ± 1° C.

Vendor No. 2

1. 60 hard and 60 soft glass units at 77° ± 1°C.

2. …

Analysis And Simulation Of Chirp Radar System, Tina Tsung Tsai

Theses

This paper consists of a technique to design a Chirp radar system and proposes a solution to optimize the design of the linear time delay network required in such systems. A Chirp radar system has a wide bandwidth for high range resolution, and long pulse duration for high velocity resolution and high transmitted energy. The technique of a pulse compression system offers a means of increasing the average power available to illuminate radar targets without any loss of the resolution at the receiver needed for the tactical requirements of the system. This is accomplished by transmitting a wide pulse in …

A Model For The Determination Of Market Based Pricing Of Telecommunication Products, Katherine J. Sullivan

Theses

The deregulation of AT&T, has impacted telecommunication product pricing in the U.S. market. Previously, pricing had been based on cost plus mark-up, as stipulated by regulatory commissions. Now, pricing decisions require consideration of the competitive impact, consumer demand for the product, corporate pricing objectives and marketing strategies. This paper proposes a pricing process that is relevant for this new environment which enables the product manager to price properly.

The method proposed utilizes microeconomic theory and takes into account the product test price, unit cost, opportunity cost, nonprice factor cost and consumer demand. Incorporating a number of different pricing strategies, it …

Sorptive And Geotechnical Characteristics Of Kaolinite, Chi-Yuan Shih

Theses

The sorption/desorption behavior of phenol and chlorobenzene as well as their influence on geotechnical characteristics of kaolinite were studied. The results reveal that the sorption process follows closely with the Freundlich adsorption isotherm whereas the sorption/desorption ratio depends upon the characteristics of organic compounds.

A series of geotechnical properties tests was also undertaken after achieving equilibrium at different concentrations of organic compounds. It was found that the parameters such as liquid limit, plastic limit, optimum moisture content, and dry density increase with an increasing-concentration of organic compounds.

The relationship between the geotechnical, properties and sorption behavior of soils provides the …

System Performance Criteria In Cdma Networks Using Gold Codes, Yong H. Kim

Theses

First, we have presented the autocorrelation and crosscorrelation properties for periodic and aperiodic binary sequences. The generation of binary sequences using shift registers with feedback was reviewed. We have also included correlation properties for the Gold codes.

Next, we discussed Gold code generation for the balanced and unbalanced Gold codes.

Thirdly, we investigated the number of simultaneous users in a CDMA system using Gold codes for the worst case and the average case of mutual interference.

Finally, we simulated the probability of interference exceeding a threshold value, and the average crosscorrelation value caused by interference in a CDMA network which …

Modeling And Simulation Of Robot Arms With Flexible Links, John G. Danis

Theses

The design of lightweight robot arms introduces a degree of flexiblity in the individual links which renders the arm difficult to control. Solution of the control problem requires accurate and detailed mathematical models of the arm dynamics. A comprehensive survey of the current literature in this area has shown that although many such models exist, there is a great diversity in their structure, function, and applicability. The different objectives and techniques of model development which lead to this diversity are examined and summarized in this thesis. Bases for classification of the mathematical models and techniques of development are established, and …

Design Of A Fiber Optic Oxygen Sensor Based On Immobilized Hemoglobin, Mendu Govind Raj

Theses

The fiber optic Oxygen sensor consists of a thin layer of immobilized deoxyhemoglobin at the common end of a bifurcated fiber. Immobilization is done using the alginate gel procedure. The immobilized reagent is separated from the standard oxygen sample by the gel with or without semi-permeable membrane, and the entire configuration is enclosed in an oxygen free sample cell. Light from a tungsten-halogen lamp, filtered through a 405nm filter is passed through one arm of a bifurcated fiber to the sample cell. The reflected intensity (a highly polished aluminum foil or a plate is placed at the bottom of the …

Rf Characterization Of A Directly Modulated Ingaasp Buried Heterostructure Laser Diode, Charlotte Alvarez

Theses

The use of fiber optics for the transmission of microwave signals had its beginnings in 1984. Applications were limited to the lower microwave frequency regions. Technology in this field is advancing rapidly due to the high demand driven by the telecommunications community for high speed digital applications. Extensive research and development efforts are underway by both the component manufacturers and the subsystem end user. Most of the near term applications of microwaves in fiber optics are in weapon systems and communication systems for military and other government agencies.

The high frequency modulation characteristics of Lytel's InGaAsP 1300 nm buried heterostructure …

Comparison Of Various Techniques For The Detection Of Lines In 2-Dimensional Images, Somayajulu Bhamidipati

Theses

The detection of straight lines in 2-dimensional images leading to polygonal approximation to the boundaries of the objects is one of the important stages in scene analysis as it leads to the description of the images. The comparison of three diverse approaches for this problem in terms of the efficiency and accuracy is made, and their performance for different types of data and different sets of parameters is studied in this thesis.

The data points are generated using either an edge detection algorithm using chain encoding on real images or a synthetic data generator, which can create a variety of …

Data Flow Dependency Generator, Chin-Piao Chan

Theses

Data flow is a new approach to parallel computing. The concept is to enable the execution of an instruction whenever its operands become available. The only constraints in a data flow machine are the data flow dependencies between instructions.

In this thesis, a simulation package called the Data Flow Dependency Generator is developed. This package is designed to express the idea of data flow computations, the data flow dependencies and the use of multiprocessors.

Given a number of processors, a number of time units for each operation and a program, the Data Flow Dependency Generator finds the data dependencies between …

Utilization Of The Theory Of Constraints Approach For Improving A Manufacturing Enterprise Profitability : A Case Study, Yaron Chaut

Theses

The past two decades have been a difficult period for the U.S. as it lost its dominant position in one manufacturing industry after another to Japan. The American worker was initially blamed for this phenomenon - he was too expensive, was less productive, and produced lower quality products then the Japanese worker. The opening of factories in the U.S. managed by Japanese with American workers proved this claim to be wrong, as their products were competitive and often even better then the original Japanese products. It also indicated that the Japanese production planning and control methods are the primary reason …

A 3-D Tactile Sensor With Digital Output, Sin-Shou Cho

Theses

This thesis details the design of a new tactile sensor for general-purpose robot manipulators. Such manipulators, designed to be functionally equivalent to the human hand, will require sensor arrays that fulfill several requirements : (1) many sensor elements to minimize tactile imaging time, (2) close spacing of small sensing elements for fine spatial discrimination, (3) ability to be molded to a convex fingertip surface for taction on concave surfaces, (4) tolerance to over-scale forces without damage. In addition to the above, which are considered requirements, several other characteristics are desirable. Foremost is the ability to sense shear forces, which provide …

Two Domain Heat Transfer Studies Using A Coupled Finite-Difference And Boundary Element Programs, Serap Dikmenli

Theses

An iterative coupling of a finite-difference boundary layer code "STAN5"' and a boundary element code "BEASY"2 have been used to study two dimensional convective-conductive problems. The coupling method essentially leaves undisturbed the codes of these programs and uses their custom features in their applicable domains. The boundary layer program is used-in the convective domain, while "BEASY" is used in the solid domain. Compatability conditions are established between these domain solutions and an iterative scheme is used until these conditions are mutually satisfied.

The indirect communication of compatability (boundary) criteria between these programs was achieved by two editor/data-transferor like programs. Combined …

Expert Systems Approach For Means Of Egress Analysis, Dimitrios N. Dontas

Theses

The use of Expert Systems has grown dramatically during the 1980's. Developed as a branch of Artificial intelligence, knowledge based Expert Systems were at first of academic interest only. With successful application of knowledge based Expert Systems to medical and other diagnostic problems, industrial and commercial use of this technique is also increasing significantly. As of 1986, fifty percent of the Fortune 500 companies are embarked in their own Expert Systems research.

A variety of knowledge based Expert Systems has been developed for the Civil Engineering design and construction industries. The applications cover a wide range of subjects, including among …

A Methodology For Evaluating Prospective Investments In Flexible Automation, Werner A. Eikenbusch

Theses

The flexible automation of production systems (FA) provides the technology necessary for competitive success. However, the use of traditional budgeting methods has proved unsatisfactory when evaluating this type of investment, primarily because of the inadequate consideration being given to the resultant strategic benefits.

A methodology considered suitable for evaluating FA investments is proposed together with an illustrative application. To determine its industrial usefulness, manufacturing managers of North American and West German companies were surveyed both via interviews and via questionnaires. Their response confirms the merit of the procedure, despite the differences in competitive foci found between the American and the …

An Investigation Of Interrupt Handling Schemes In Pipeline Processors, Shailesh Ratilal Gami

Theses

In order to acheive higher performance in a pipeline processor, proper interrupt handling is essential. In a pipeline processor, interrupt handling is difficult because many instructions are in the processor at the same time. This study describes and evaluates the different solutions to interrupt handling. Several pipelined 32-bit microprocessors have also been studied and their architectural and programming features are compared.

Ibm/Xt-Based Automatic Monitoring Instrumentation System For Eating Behavior Studies In Rats, Binghong Gui

Theses

An auto-feeding system based on the IBM-XT microcomputer has been designed for use in the anti-obesity research program in the Pharmacology Department at Hoffmann-La Roche Inc. By using this system, experimental rats can be automatically fed, some which have been given anti-obesity drugs and some which have not. The system can also collect data, such as eating times and food intake, which are used for studying the rat's eating behavior.

The system is designed to control thirty six cages with one experimental rat in each cage and it performs three functions:

1 ) To automatically dispense a preset quantity of …

Micro Cad/Cam System Selection And Implementation, Christian Georg Haas

Theses

The rapid growth of the computer market in the last four decades causes difficulties in evaluating the various systems and configurations of this complex market.

This thesis focuses on graphics capable microcomputers in the computer aided design (CAD) and computer aided manufacturing (CAM) field. The thesis emphasizes the technical possibilities such a system offers in terms of hardware, software and applications. Each hardware and software component is detailed to give a new-comer the opportunity to update him or herself in this high technology field. Technical information, as well as installation and implementation are described. Also, provided are lists of several …

Performance Of Single Dwell Serial Synchronization System, Chan-Yee Hsiung

Theses

By using the sampling theorem, the problem of the detection of a signal in white Gaussian noise, reduces to the consideration of the sum of the squares of statistically independent Gaussian variates. If the transmitter and and receiver are not synchronous, then no data transmission is possible and the decision statistic has a central chi-square distribution. Otherwise, the decision statistic has a non-central chi-square distribution. Also, this. paper presents a method to calculate the mean and variance of the acquisition time which are the most important parameters to evaluate the performance of a PN spread synchronization system. In addition, the …

Apap: The Arithmetic Pipeline Analysis Package, Chang-Chieh Lin

Theses

This study is aimed at the development of an interactive PC-based package for simulating data flow within an arithmetic pipeline in multiprocessor systems. The user constructs the arithmetic pipeline, specifying the functionality of each segment, the intersegment connectivity and pipeline inputs and outputs. After defining reservation tables and data, analysis is performed with the results available in tabular, simple graphic and animated graphic forms.

APAP allows the user to design hardware and analyze its functionality with-out building the circuit, an economical alternative. Even when circuits are to be built, APAP allows the user to correct logic errors before implementation, leaving …

An Analysis Of The Second-Order, Type-One Hilbert Phase-Locked Loop, Inn-Shian Lin

Theses

In this thesis, a second-order, type-one PLL ( Phase- Lock, Loop ) in which the usual lead-lag loop filter is paralleled with a Hilbert Transformer (the whole system is called HPLL) is analyzed. A motivation for the study was that earlier researchers have found improved performance if Ilse lead-lag network is paralleled by a differentiator, result mg in the so called ERPIM (Extended-Range Phase-Locked Demodulator). For the purpose of com-parison with earlier experimental and analytical results on the PLL and the ERPLD, the numerical results in this thesis ale based on the parameters of Acampora and Newton.

The basic characteristics …

Simulation Study Of The Multi-H Continuous Phase Modulation, Min-Ling Lin

Theses

Of particular interest in satellite communications are modulation techniques that have a relatively constant envelope and are power and bandwidth efficient. Attempts have been made to satisfy these requirements by using phase and frequency modulation formats. Recently, one approach has been researched which combines the modulation and encoding functions, which is referred to as multi-h continuous phase modulation. Simultaneously good power and bandwidth efficiencies can be achieved at the expense of increased complexity.

This report examines the performance of multi-h continuous phase modulation by a simulation. A multi-h phase coded modulation is generated, passed through the AWGN transmission channel. The …

Interface To 8052ah-Basic Microcontroller For A Multichannel Priority Interrupt System, Chen-Tung Mo

Theses

This thesis presents the design and development of a system with the capability to detect up to forty channels of signals generated from different analog sources and to process them under the control of a microcomputer.

The present work offers the design and implementation of a hardware interface unit in a multichannel real-time data acquisition system as well as the application software program to operate it. This kind of system can be widely used in process control, musical instrument interfacing, and machine automation.

This interface unit follows the general instrumentation architecture in both signal processing and logic control. The software …

High Frequency Gaussian Beams Solution Of A Plane Wave Coupling Into Cylindrical Cavity, Christine Issa Mourad

Theses

Propagation of high frequency fields as a superposition of Gaussian beams instead of geometrical ray fields has potential advantages in complicated environments because the beams do not fail in ray optic transition regions. While the Gaussian beam method can be made rigorous through self consistent stacking of displaced and tilted beams on a Gabor phase space lattice, with retention of full beam spectra, computation is facilitated when the propagation domain is covered with paraxially approximated nontilted beams. The spectral deficiencies introduced by this simplified propagation model depend on the propagation environment. They are examined here for a plane wave coupling …

A Dynamic Set-Based Multiaccess Protocol For Local Area Networks, Parul S. Nanavati

Theses

The packet-broadcasting technique brings together the advantages of both packet switching and broadcast communication. The central problem of a packet broadcast network is conflict resolution among the users sharing the broadcast communication link. Collisions are the major source of transmission errors which degrade the performance of a LAN. Proposed here is a novel multiaccess protocol which offers full communication resources to the user at low traffic requirements. It dynamically adjusts the number of users allowed to access the medium at heavy traffic requirements such that number of collisions are reduced and thus maintains the efficient utilization of the medium and …

Design Criteria Of Coherent Optical Fiber Communication System, Rajesh N. Patel

Theses

Design criteria of coherent optical fiber communication system were discussed and investigated. First, the different types of optical fibers (waveguides) were discussed. Then the laser sources, photo-detectors, transmitter & receiver circuits were discussed in detail.

Design criteria of conventional intensity modulated (direct detection) optical fiber communication system were discussed. Then, the design criteria and estimation of number of photons for different modulation schemes for coherent optical fiber communication system were analyzed.

Coherent optical fiber communication system's advantages and drawbacks were discussed in detail. Improvement in receiver sensitivity of coherent detection compare with conventional direct detection was investigated. Finally, some receiver …

Microprocessor Testing And Computer Aided Diagnosability Of Digital Circuits, Shirish Patel

Theses

Computer Aided Diagnosability Of Circuits (CADOC), a new method is developed for isolating and pin-pointing a faulty device in digital circuits. CADOC is based on graph-theoretic principle and PFD numbers. Without considering any SA1 or SAO faults, we can zoom out faulty device by selecting different diagnostic path to narrow down the faulty region and to isolate the faulty device. The efficiency of this new technique is confirmed by applying the technique to many examples.

Design And Development Of An Infrared Ccd Camera, John Frederick Romanowich

Theses

An infrared CCD camera system was designed and developed for operating various sizes of Schottky-barrier IR-CCD image sensor chips. The camera has a digitally programmable frequency synthesizer for operating the 160 X 244, 320 X 244, and 256 X 256 image sensors developed at the David Sarnoff Research Center. The electronics of the camera are designed to provide the outputs required for operating a XYZ monitor, a standard TV monitor, or a computer workstation. At the core of the camera design is a RS-170 standard sync generator that supplies the waveforms for synchronizing the camera's circuitry to produce a composite …