Digital Commons Network^™

Impulse, Lois Hatton, Dan Merritt, Carrie Sword

Impulse (Jerome J. Lohr College of Engineering Publication)

No abstract provided.

Santa Clara Magazine, Volume 31 Number 2, Winter 1989, Santa Clara University

Santa Clara Magazine

10 - MANUFACTURED MOTHERHOOD A Catholic theologian looks at reproductive technology.

16 - ELECTION '88 Will Bush put a new face on Uncle Sam?

20 - IN THE FACE OF AIDS What alumna Sharon Kugler '81 learned hel ping AIDS sufferers.

23 - ON A ROLL New York's hottest director is SCU's Ron Lagomarsino '73.

25 - DO JOBS AND COLLEGE MIX? Alumni and students tell how they fit part-time jobs into their schedules/

Ua66/9 The Birth Of Engineering Technology, Boyce Tate, Wku Engineering

WKU Administration Documents

A history of Engineering Technology at WKU.

Germ Weight, Germ Oil Content, And Estimated Oil Yield For Wet-Milled Yellow Dent Corn As Affected By Moisture Content At Harvest And Temperature Of Drying Air, Curtis L. Weller, Marvin R. Paulsen, Stephen Mbuvi

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A split-plot experimental design was used to determine the effect of moisture content at harvest and temperature of drying air on weight, oil content, and estimated oil yield of corn germs recovered from laboratory wet milling. The effects were determined for a high-yielding hybrid of yellow dent corn widely grown in the corn belt that was hand-picked and hand-shelled. Germ oil content decreased significantly as moisture content at harvest and temperature of drying air increased. Germ weight and estimated oil yield generally decreased as both moisture content at harvest and temperature of drying air increased from 17.2 to 29.6% and …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, January 1989, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A ten page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

An Inexpensive Electronic Viewbox, J. R. Cox Jr., R. G. Jost, T. Monsees, S. Ramamurthy, M. Karlsson

All Computer Science and Engineering Research

An "electronic viewbox" is described that has been designed to meet the demand for a modestly priced soft-copy display for radiology. Issues associated with spatial resolution, intensity resolution, image magnification, user interface, digital communications and possible applications are discussed.

The Next Generation Of Internetworking, Gurudatta M. Parulkar

All Computer Science and Engineering Research

This paper describes a research effort concerned with the design of the next generation of internet architecture, which has been necessitated by two emerging trends. First, there will be at least a few orders of magnitude increase in data rates of communication networks in the next few years. For example, researchers are already prototyping networks with data rates of up to a few hundred Mbps, and are planning networks with data rates up to a few Gbps. Second, researchers from all disciplines of science, engineering, and humanities plan to use the communication infrastructure to access widely distributed resources in order …

Group Set-Up For Printed Circuit Board Assembly, Tali F. Carmon, Oded Z. Maimon, Ezey M. Dar-El

Industrial and Manufacturing Engineering

The current practice in the assembly of electronic components on printed circuit boards (PCBs) is serial production. a process characterized by very long set-up times. However, with the advent of efficient on-line process information .. new production control methods are now possible. This paper proposes a different production method, called the group set-up (GSU) method, which can significantly reduce set-up times. The traditional and the GSU production methods are compared, and it is shown that the GSU always performs better than the traditional method in terms of total production flow (throughput) and labour time However, the traditional method performs better …

Master Of Science Computer Information Systems 1989-1990, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Quantitative Effects Of Iron Chelators On Hydroxyl Radical Production By The Superoxide-Driven Fenton Raction, Jean Blair Smith, Joanne C. Cusumano, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Publications

Iron bound to certain chelators is known to promote the conversion of superoxide radicals (O2) to hydroxyl radicals (HO') by the superoxide-driven Fenton reaction. The production of HO' by various iron chelates was studied using the reaction of dimethyl sulfoxide and HO' to produce methane sulphinic acid. Methane sulphinic acid was quantified by use of a simple colorimetric assay and used to determine the amounts of HO' produced. Superoxide was generated from 200 M hypoxanthine and 0.05 U/ml xanthine oxidase in the presence of 0-100 M iron and 100 M of each chelator. The results of this preliminary investigation illustrate …

Effect Of Oxygen Concentration On The Formation Of Malondialdehyde-Like Material In A Model Of Tissue Ischemia And Reoxygenation, Steven C. Salaris, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Publications

This study was conducted to explore the functional relationship between oxygen concentration during tissue reoxygenation after ischemia and the extent of postischemic lipid peroxidation, an indicator of reoxygenation injury. Excised rat liver or kidney tissue was rendered ischemic for 1 h at 37°C, minced into 1 mm3 fragments, and then reoxygenated for 1 h in flasks of buffered salt solution containing various amounts of oxygen. Production of malondialdehyde-like material (MDA) was measured to indicate lipid peroxidation. MDA production was minimal at oxygen tensions less than 10 mmHg, increased sharply from 10 to 50 mmHg, and plateaued at approximately 100 mmHg. …

Lethal Hydroxyl Radical Production In Paraquat-Treated Plants, Charles F. Babbs, Jo Ann Pham, Ronald C. Coolbaugh

Weldon School of Biomedical Engineering Faculty Publications

Bipyridinium herbicides, including paraquat and diquat, are believed to act by generating highly reactive, oxygen-centered free radicals within chloroplasts when treated plants are exposed to sunlight. This hypothesis has not yet been confirmed by direct chemical measurements of specific free radicals. We studied paraquat-treated plants using a new method able to detect and quantify formation of highly reactive and deleterious hydroxyl radicals (HO*), in which dimethyl sulfoxide (DMSO) is used as a molecular probe. DMSO is oxidized by HO* to form the stable, nonradical compound, methane sulfinic acid, which can be easily extracted from plant tissue and measured spectrophotometrically. Initial …

Automatic Color Segmentation Of Images With Application To Detection Of Variegated Coloring In Skin Tumors, Scott E. Umbaugh, Randy Hays Moss, William V. Stoecker

Electrical and Computer Engineering Faculty Research & Creative Works

A description is given of a computer vision system, developed to serve as the front-end of a medical expert system, that automates visual feature identification for skin tumor evaluation. The general approach is to create different software modules that detect the presence or absence of critical features. Image analysis with artificial intelligence (AI) techniques, such as the use of heuristics incorporated into image processing algorithms, is the primary approach. On a broad scale, this research addressed the problem of segmentation of a digital image based on color information. The algorithm that was developed to segment the image strictly on the …

A Thermal Analysis Of A Spirally Wound Battery Using A Simple Mathematical Model, T. I. Evans, Ralph E. White

Faculty Publications

A two-dimensional thermal model for spirally wound batteries has been developed. The governing equation of the model is the energy balance. Convective and insulated boundary conditions are used, and the equations are solved using a finite element code called TOPAZ2D. The finite element mesh is generated using a preprocessor to TOPAZ2D called MAZE. The model is used to estimate temperature profiles within a spirally wound D-size cell. The model is applied to the lithium/thionyl chloride cell because of the thermal management problems that this cell exhibits. Simplified one-dimensional models are presented that can be used to predict best and worst …

The Multiprocessor System With A Fairly Weighted Global Bus Arbitration Circuit, Shinobu Doi

Theses and Dissertations

The objective of this thesis is to investigate various multiprocessor system structures and to implement and test the resultant system configuration that offers high reliability and availability, ease of expansion, ease of programming, and increased computing performances. The resultant system is a MC68000 based tightly coupled multiprocessor system with large local memories and local I/Os, arbitrated by a specially designed arbitration circuit to implement pseudo random global bus granting. Each of the computer modules is an enhanced independent uniprocessor system with channel access switches to access the global memory. In its multiprocessor mode one computer module cooperates with the other …

Speech Synthesis Using A Digital Modulation Scheme On The Ibm Personal Computer, John Glenn Wallace

Masters Theses

"Previously the primary output interface that users of personal computers have had available to them were limited to the crt or the printer. This paper presents a method for implementing a voice synthesizer on an IBM personal computer using only the hardware already contained in the personal computer. Presented is a modulation method which can be used with the IBM to obtain good quality voice output. The method consists of 3 parts, 1) sampling and recording the voice, 2) processing and filtering these samples and 3) using these processed samples to drive the speaker. A description of the hardware used …

A 68000-Based Produce Sorting Microcomputer : Graduate Clinical Research Master's Report, Ramzi Albert Haidamus

University of the Pacific Theses and Dissertations

This report discusses in great detail the various research, design, and development stages of the Produce Sorting Microcomputer developed for HAGAN ENGINEERING Inc. The two-semester Clinical Research project has been approved by the graduate committee at the School of Engineering at the University of the Pacific and fulfills the requirements towards a Master Degree in Electrical Engineering.

The project was selected based on its complexity, feasibility, the time span it required to complete, and its relevance to the area of real time microcomputer design. In addition, the design constraints and specifications were to be dictated solely by HAGAN ENGINEERING Inc. …

Construction Specifications For Highway Projects Requiring Horizontal Earth Boring And/Or Pipe Jacking Techniques, Donn Edward Hancher, Thomas D. White, David Thomas Iseley

JTRP Technical Reports

No abstract provided.

Laboratory Investigations On Latex-Modified Concrete, Sidney Diamond, Qizhong Sheng

JTRP Technical Reports

No abstract provided.

Optical Recording Aspects Of Rf Magnetron Sputtered Iron-Garnet Films, J.P. Krumme, V. Doormann, P. Hansen, H. Baumgart, J. Petruzzello, M.P.A. Viegers

Electrical & Computer Engineering Faculty Publications

The intrinsic magneto-optical readout performance in reflection is calculated for bismuth and cobalt-substituted iron-garnet films on a multilayer interference mirror at 800-, 633-, 488-, and 420-nm wavelengths and is compared with that of a trilayer medium composed of an antireflection layer, a rare-earth transition-metal film, and a metallic mirror. It is found, when disregarding inhomogeneities, like irregular domain shape, ripple of the magnetic anisotropy, and surface roughness, that iron garnets are superior to rare-earth transition-metal films at blue to near-ultraviolet wavelengths if operated at thicknesses where optical interference occurs in the magnetic layer. Optical transmittance at these thicknesses is sufficiently …

Irish Building Services News

Building Services Engineering

No abstract provided.

Modeling The Electromagnetic Radiation From Electrically Small Table-Top Products, Todd H. Hubing, J. Frank Kaufman

Electrical and Computer Engineering Faculty Research & Creative Works

It is noted that the most difficult radiated electromagnetic interference (EMI) problems with table-top products often occur at frequencies where the maximum dimensions of the product are much smaller than a wavelength. Electrically small table-top products tend to be much more efficient radiation sources than dipole source models would predict, and the radiation is generally much more difficult to contain than other types of EMI source models indicated. The ways in which electrically small sources radiate are investigated, and a technique for modeling electrically small table-top products that have power or signal cables is proposed. The end-driven wire model is …

Relationships Between Chemistry Variations And The Morphology And Nodular Formation Of Carbon Nodules In Ductile Cast Iron, Donald Francis Cassel

Dissertations and Theses @ UNI

The purpose of this study was to determine what relationships exist between the chemistry and the morphology and nodular formation of carbon nodules in commercially produced ductile cast iron. Additionally, the effects of chemistry on the hardness of produced castings from net shake processes were investigated. According to pertinent information in current literature, the hardness of castings has a direct bearing on the final cost of products.

The method of gathering this information and developing a correlation between the chemistry variations and the morphology and nodular formation was facilitated by the cooperation of a commercial producer of ductile cast iron …

Competencies Required Of Baccalaureate Degree Graduates From Graphic Communications Programs, Eldon B. Swanson

Dissertations and Theses @ UNI

The problem of this study was to identify and validate a list of competencies that may be used by graphic communications educators as the basis for curricula development that meets the needs of the contemporary graphic communications industry. The purpose of this study was to provide the graphic communications educator with a comprehensive, prioritized, and logically clustered list of competencies required of baccalaureate degree graduates from graphic communications programs as perceived by representatives from the graphic communications industry and graphic communications educators.

The survey instrument used for this study is based on a seven point graphic rating scale on which …

A Pulsed Field-Gradient System For Nuclear Magnetic Resonance Diffusion Experiments, Saumil Shirish Mehta

Masters Theses

"The construction and performance of a system to generate pulsed magnetic field gradients for use with a commercial superconducting NMR spectrometer for the purpose of molecular self-diffusion measurements is described. Types of coils that provide linear field gradients are discussed. The design and construction of a conventional Helmholtz pair is outlined. A procedure to estimate the magnitude of the field gradients generated by the Helmholtz coils is explained. The design of a circuit to generate fast current pulses using a power MOSFET has been detailed and compared with a functionally similar circuit using bipolar power transistors. The performance of the …

The Effect Of Cable Terminations On Emi Measurements, Todd H. Hubing

Electrical and Computer Engineering Faculty Research & Creative Works

The effects of using uncontrolled or undefined cable terminations during electromagnetic interference (EMI) measurements was investigated. Several different models are described along with corresponding measurements in order to illustrate how specific terminations can be used to achieve particular measurement goals. It is noted that until a well-defined method of terminating power and signal cables is introduced, the best the EMI test engineer can do is to be aware of the significance of common-mode terminations and try to avoid situations where the common-mode termination impedance is completely undefined or not repeatable.

Randomized Routing On Fat-Trees, Ronald I. Greenberg, Charles E. Leiserson

Computer Science: Faculty Publications and Other Works

Fat-trees are a class of routing networks for hardware-efficient parallel computation. This paper presents a randomized algorithm for routing messages on a fat-tree. The quality of the algorithm is measured in terms of the load factor of a set of messages to be routed, which is a lower bound on the time required to deliver the messages. We show that if a set of messages has load factor lambda on a fat-tree with n processors, the number of delivery cycles (routing attempts) that the algorithm requires is O(lambda + lg n lg lg n) with probability 1-O(1/n). The best previous …

Ultrashort Pulse Production In Synchronously Pumped Mode-Locked Dye Laser Systems, Duncan Leo Macfarlane

Dissertations and Theses

The concern of this dissertation is the understanding and improvement of a class of lasers that is responsible for some of the shortest optical pulses available today. In particular, we seek ways to produce from synchronously pumped mode-locked dye laser systems, shorter pulses of higher intensity with improved pulse-to-pulse consistency. Specific topics.that are discussed herein include the study of the role of the pump pulse in synchronously pumped mode-locked lasers, the study of the pulse shaping and shortening due to an intracavity saturable absorber, and the study of a fundamental pulse train instability associated with these lasers.

The Effects Of Bandwidth Limiting Tuning Elements On A Synchronously Pumped Mode-Locked Dye Laser, Bahram Zandi

Dissertations and Theses

In this study an improved description of the bandwidth limiting tuning filters has been introduced into a semiclassical model for a synchronously pumped mode-locked dye laser system. This model is an improvement over the traditional rate equation approach since it has detailed representations of the energy levels, rotational distribution, and coherence effects. The new set of equations has been solved numerically using the best available values for the various parameters, and autocorrelations have been computed for a range of different length detuning and bandwidth limiting elements. In the experiments, an acousto-optically mode-locked argon ion laser is used to synchronously pump …

Mobile Deployable Bases And Ports: A Study For Interim Requirements, William Glenn Moore

Marine Affairs Theses and Major Papers

Logistics is an age old problem that has been the key to the greatest victories and defeats in history. Maritime support of wartime land campaigns as well as conflicts at sea, has been the answer to that problem even as far back in history as the ancient Greek Empire. Throughout the ages however the lesson that seems to be learned and relearned, the hard way, is that of logistic support. Today the United States is faced with what, to some seems to be an overwhelming problem in logistic support overseas, particularly in the maritime transportation and support arena. The U.S. …