Digital Commons Network^™

An Analysis Of The Endurance Of Mobile Satellite Command And Control Systems, Steven O. Brown

Theses and Dissertations

This study investigated the endurance of a single deployed generic mobile space (GMS) command and control (C2) system. Specifically, factors which affect overall system performance were examined. The analysis began with the development of a simulation model for a GMS C2 system. Optimal settings of factor levels were determined by using the model to find peak system endurance and availability. Factors set were field support vehicle (FSV) access, numbers of maintenance personnel, and numbers of spare components available. After optimum values were chosen for these factors, an experimental design was conducted to determine factor effect between maintenance manpower and the …

Automating The Weekly Flight Scheduling Process At The Usaf Test Pilot School, Gary G. Foster

Theses and Dissertations

This study investigated different scheduling solution approaches that could be automated and applied at the USAF Test Pilot School (TPS). Currently at the TPS, flight schedules are manually developed on a daily basis. Weekly flight schedules are not developed due to the large quantity of data that must be processed to develop a flight schedule for an entire week. A weekly flight scheduling approach would reduce the occurrence of scheduling problems and unbalanced resource utilization, both of which are often the result of a daily flight scheduling approach. In addition, posting a flight schedule for the entire week would improve …

An Analysis Of Escort Formations, Mustafa Ilhan

Theses and Dissertations

This study used computer simulation to investigate escort fighter formations unknown interceptor threat environment. A USAF computer simulation model, TAC, was used to simulate air combat between the escorts and the interceptors in several different combat scenarios. The escort formations were defined by the vertical and horizontal distances of the escort fighters from the main strike body. Interceptors were characterized as one of two types of fighters with dissimilar aircraft frames and missile firing ranges. A central composite design was used to mathematically model the effect of escort formations and interceptor type on the survivability of the bombers and escorts. …

An Outline For A Manufacturing Planning And Control System For A Repair/ Overhaul/Rebuilding Environment, Peter H. Miyares

Theses and Dissertations

This study outlines a structure for a manufacturing planning and control (MPC) system for a repair/overhaul/rebuilding environment. Included an examination of the organizational components that must be incorporated into the system and the planning functions for which the system can be used. The study compares and contrasts the differences between an MPC system for a maintenance organization and a manufacturing organization and concludes that the MPC system for a maintenance organization must account for the greater degree of variability that occurs within the process. The proposed system is composed of an information system which collects data from throughout an organization …

Quantifying The Impact Of The Acquisition Professional Development Program Certification Requirements On The Air Force Institute Of Technology, Paul A. Nicholson

Theses and Dissertations

The purpose of this research is to determine the impact of implementing the Acquisition Professional Development Program on the Air Force Institute of Technology. APDP is part of a DOD-wide effort to decrease inefficiency in the procurement process. The program encompasses a tri-level certification process based on experience, training, and educational standards. APDP serves as a guideline for professional development of acquisition personnel from entry to senior level management. Many of the courses required for certification are offered through AFIT School of Systems and Logistics. Integrating the new educational requirements as a standard for career development is expected to produce …

A Decision-Theoretic Approach To Recommending Action In The Air-To- Ground Aircraft Of The Future, Garrison H. Flemings

Theses and Dissertations

Designers of air-to-ground fighters of the future should consider including decision support systems to relieve pilots of some of the present workload. Those decision support systems should use utility theory. This work reviews two techniques of utility theory (decision trees and influence diagrams) and a new technique due to Morlan (probability ratio nets). The work includes a proposed structure for action recommendation systems in air-to-ground fighters of the future. The work describes an implementation of probability ratio nets. The work demonstrates the value of decision theory to air-to-ground fighters of the future by way of solving an example problem and …

Saber: Airland Combat Training Model Credibility Assessment And Methodology, David L. Scagliola

Theses and Dissertations

Saber is a theater-level, airland combat training model, designed by a number of computer science and engineering students and faculty at the Air Force Institute of Technology (AFIT). Saber is intended to replace the Agile model, which is currently used at the Air Force Wargaming Center, Maxwell AFB, Alabama for Theater Warfare Exercise (TWX) training purposes. This thesis focuses on the progress made towards generating the Saber training model, its ability to meet the objectives specified by the Wargaming Center, and its ability to represent actual combat. Specifically, this thesis is directed towards characterizing, establishing a credibility assessment, and developing …

A Response Surface Methodology Study Of Ferroelectric Memory Devices, Kevin C. Smith

Theses and Dissertations

Fatigue in ferroelectric memory devices was studied. The application of fatigue pulses to a ferroelectric sample was controlled by the RT-66 Ferroelectric Tester, a variation of the Sawyer-Tower circuit. The RT-66 also controlled data collection following the fatiguing process. Seven variables were evaluated for their potential- affect on fatigue. A sequence of fatigue tests, which varied the settings of these variables, was developed using Response Surface Methodology (RSM) experimental designs. Least-squares regression models were developed once a particular RSM set of design experiments was completed. These models were evaluated using RSM tools, and the analysis of these models allowed the …

Boolean Reasoning And Informed Search In The Minimization Of Logic Circuits, James J. Kainec

Theses and Dissertations

The minimization of logic circuits has been an important area of research for more than a half century. The approaches taken in this field, however, have for the most part been ad hoc. Boolean techniques have been employed to manipulate formulas, but not to perform symbolic reasoning. Boolean equations are employed principally as icons; they are never solved. The first objective of this dissertation is to apply Boolean reasoning systematically and uniformly to the minimization problem. Boolean reasoning entails the reduction of systems of Boolean equations to a single equation; the single equation is an abstraction, independent of the form …

Hardware-Verification Through Logic Extraction, Michael A. Dukes

Theses and Dissertations

A Prolog-based system is described which employs logic-extraction to perform hardware-verification. The extraction rules are built automatically from hierarchical structural VHDL models, enabling the equivalence of a structural VHDL description and a layout specification to be verified. Pin-to-pin critical- path analysis is performed within the logic-extraction process; many noncritical paths are pruned early, making pin-to-pin critical path analysis of large circuits feasible. It is demonstrated that a design methodology based on logic extraction, VHDL, and a layout tool can provide a fabricated functionally- correct IC design without circuit-level or switch-level simulation. This methodology is shown to be practical for VLSI …

Acuta Enews February 1992, Vol. 21, No. 2

ACUTA Newsletters

In This Issue

Call for RD Nominations

President's column

Workshop announcement

Alabama college takes case to PSC

Party Line

Rating to Tucson seminars

A Computer Based Educational Aid For The Instruction Of Combat Modeling, Richard S. Moore

Theses and Dissertations

The Air Force Institute of Technology is one of few institutions that teaches combat modeling. Combat models are typically dynamic computer simulations of specialized dynamic processes. Great difficulty exists in portraying these dynamic and recurrent processes with conventional static diagrams. This thesis produced a computer-based instructional aid which presents animated examples of processes common to combat models, demonstrates a simple few-on-few aerial combat model, and encourages student exploration and interaction with these presentations. This aid provides dynamic examples of random number generation, detection processes, target selection, and target destruction. A complete combat model demonstrating a few-on-few air duel is animated …

Manual Of Traffic Impact Studies : Draft, Soumya Sekhar Dey, Jon D. Fricker

JTRP Technical Reports

With intensification urban development and dwindling public resources, assessing the impacts of a new development (traffic impact analysis) is becoming an important planning tool for transportation engineers, so that the traffic impacts of new developments can be foreseen and effective mitigating measures can be planned using optimal allocation of the available funds. The study establishes a detailed and standardized methodology for traffic impact analysis. Although the procedure was developed for the Indiana Department of Transportation, it can be used by other transportation agencies as well with little or no modification.

A new methodology for estimating the percentage of pass-by trips …

Efficient Hypercube Communications, Shreyas R. Bhatt

Theses

Hypercube algorithms may be developed for a variety of communication-intensive tasks such as sending a message from one node to another, broadcasting a message from one node to all others, broadcasting a message from each node to all others, all-to-all personalized communication, one-to-all personalized communication, and exchanging messages between nodes via fixed permutations. All these communication patterns are special cases of many-to-many personalized communication. The problem of many-to-many personalized communication is investigated here.

Two routing algorithms for many-to-many personalized communication are presented here. The algorithms proposed yield very high performance with respect to the number of time steps and packet …

Computer Numerical Controlled (Cnc) Machining Of Screws And Dies For Plasticating Extruders : Determination Of The Criteria For Implementing Cnc Machining, Nilesh H. Desai

Theses

The work of this thesis is dedicated to the manufacturing industry making production equipment to manufacture plastic products. The main theme of the thesis is to determine the criteria for implementing Computer Numerical Control machining to make parts with complex geometries for production equipment.

A small manufacturing company with job shop type of production was chosen as the subject and study of extruder manufacturing process was performed. The various available alternatives of CNC manufacturing units available in the market were chosen and their feasibility examined.

At present a large variety of CNC machine tools are available in the market, offered …

Ion Exchanged Glass Waveguides With Efficient Coupling To Fibers And Lasers, Shiqing Hu

Theses

To be of practical use in optical communications networks, optical components must have both low on-chip losses and efficient coupling to fibers, semiconductor lasers and detectors. In this thesis work two types of channel waveguides were designed and fabricated on BK7 glass substrate using a low-cost ion-exchange process. The first type of waveguide was formed in a simple sequence of ion-exchange and post-exchange annealing. These single mode waveguides had large mode size and were efficiently coupled to single mode fibers. The lowest loss achieved in fiber-guide direct coupling was 1.25 dB. The second type of waveguide was formed in a …

Series Compensation Investigation On The Hydro-Quebec And Nypa 765 Kv Transmission System : Modeling And Stability Analysis, Hans J. Candia

Theses

This thesis presents a mathematical approach for raising the power steady state stability limit by adding series capacitive compensation to a transmission line. The effect of series capacitive compensation and degree of compensation were investigated in detail. The power system studied includes an automatically controlled power system, IEEE Type I.

The results of the actual and theoretical steady state stability limits for a given series capacitance location and degree of compensation were obtained by applying the frequency domain technique. The natural frequencies of each compensated power network were examined.

The best location for series capacitive compensation is proposed which is …

Computational Investigation Of Slot Blowing For Fuselage Forebody Flow Control, Scott M. Murman, Yehia M. Rizk, Russell M. Cummings, Lewis B. Schiff

Aerospace Engineering

This paper presents a computational investigation of a tangential slot blowing concept for generating lateral control forces on an aircraft fuselage forebody. The effects of varying both the jet width and jet exit velocity for a fixed location slot are analyzed. This work is aimed at aiding researchers designing future experimental and computational models of tangential slot blowing. The primary influence on the resulting side force of the forebody is seen to be the jet mass flow rate. This influence is insensitive to different combination of slot widths and jet velocities over the range of variables considered. Both an actuator …

Eies 2 : A Distributed Architecture For Supporting Group Work, Computerized Conferencing & Communications Center, James Whitescarver, Robert M. Czech, Sreenivas Reddy, Ajaz R. Rana, Murray Turoff

Computerized Conferencing and Communications Center Reports

The Computerized Conferencing Center (CCCC) at New Jersey Institute of Technology (NJIT) has been researching on-line group communications for 17 years by developing and studying tools to advance the "collective intelligence". The Electronic Information Exchange System 2 (EIES2) provides a research, development and operational environment for distributed computer supported cooperative work (CSCW) systems. The EIES 2 distributed Smalltalk processor provides for rapid prototyping and implementation of muti-media CSCW facilities in the network environment. The Smalltalk support of the object model, and meta-language properties make it ideally suited for incremental development CSCW applications. The EIES2 communication environment supports a decentralized network …

Acuta Enews January 1992, Vol. 21, No. 1

ACUTA Newsletters

In This Issue

Are you ready for the ADA?

Alabama regulators take aim at campus phone services

NATA asks that blocking services be mandatory for LECS

Distance education programs, technology continue to mature

Message From The President

Merging technologies may mean crossfire of competition

Monographs: opportunity to share knowledge

ADA to have far-reaching effect on telecommunications

Party Line

Annenberg announces distance learning grants

Marketplace Update

All Optical Synchronisation With Frequency Division Using A Self Pulsating Laser Diode, Gerald Farrell, P. Phelan, Joe Hegarty

Articles

A master optical clock from a mode locked laser is distributed to two slave twin section lasers. One slave laser divides the optical modulation frequency by 2, the other slave laser multiplies the frequency by 2. It is also possible to vary the multiplication4ivision ratio in a slave laser using only DC control of the absorber of the twin section laser.

Architectural Support For Designing Fault-Tolerant Open Distributed Systems, Salim Hariri, Alok Choudhary, Behcet Sarikaya

Electrical Engineering and Computer Science - All Scholarship

A distributed system consists of autonomous computing modules that interact with each other using messages. Designing distributed systems is more difficult than designing centralized systems for several reasons. Physical separation and the use of heterogeneous computers complicate interprocessor communication, management of resources, synchronization of cooperating activities, and maintenance of consistency among multiple copies of information. The main advantages of distributed systems include increased fault-tolerance capabilities through the inherent redundancy of resources, improved performance by concurrently executing a single task on several computing modules, resource sharing, and the ability to adapt to a changing environment (extensibility). Distributed systems cover a wide …

Nothing Recedes Like Success - Risk Analysis And The Organizational Amplification Of Risks, William R. Freudenburg

RISK: Health, Safety & Environment (1990-2002)

Professor Freudenburg believes that there is room for improvement in Risk analysis, particularly in drawing on systematic studies of human behavior in the calculation of real, empirical probabilities of failure. The need is argued to be especially acute where technological Risks are associated with low expected probabilities of failure and are managed by human organizations for extended periods of time. This permits complacency to set in.

Summary Of Workshop To Review An Omb Report On Regulatory Risk Assessment And Management, John S. Evans, John D. Graham, George M. Gray, Adrienne Hollis

RISK: Health, Safety & Environment (1990-2002)

Summary of the results of an invitational workshop conducted to peer review the 1990 OMB report, CURRENT REGULATORY ISSUES IN Risk ASSESSMENT AND Risk MANAGENMENTIN REGULATORY PROGRAM OF THE UNITED STATES GOVERNMENT, APRIL 1, 1990 - MARCH 31, 1991.

Translation Of 'Kamalakanta: A Collection Of Satirical Essays And Reflections', Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

This venture was born initially out of the desire to make those works of Bengali literature which have moved me profoundly, and which I consider first-rate by any yardstick, available to friends and fellow enthusiasts who cannot read the original. In attempting to channel literary and philosophical masterpieces into a different medium, I Have experienced firsthand the formidable challenge that a translator must face because not only of the barrier imposed by the languages involved, but perhaps more so because .of his or her own severely inadequate faculty being called upon to match both the genius and the inspiration of …

Towards The Use Of Situational Information In Information Retrieval, Robert N. Oddy, Elizabeth D. Liddy, Ann Bishop, Eileen Martin, Joseph Elewononi, Bhaskaran Balakrishnan

School of Information Studies - Faculty Scholarship

This paper is an exploratory study of one approach to incorporating situational information into information retrieval systems, drawing on principles and methods of discourse linguistics. A tenet of discourse linguistics is that texts of a specific type possess a structure above the syntactic level, which follows conventions known to the people using such texts to communicate. In some cases, such as literature describing work done, the structure is closely related to situations, and may therefore be a useful representational vehicle for the present purpose. Abstracts of empirical research papers exhibit a well-defined discourse- level structure, which is revealed by lexical …

Development Of A Rotation Device For Microvascular Endothelial Cell Seeding, G. Pasquinelli, P. Preda, M. Vici, G. N. Martinelli, A. Freyrie, T. Curti, M. D'Addato

Cells and Materials

A rotation device (RD) specifically designed to achieve sterile endothelial cell (EC) seeding of vascular grafts has been developed. The basic characteristics of the RD include: small dimensions, fully autoclavable components, and perfectly sealed graft holders. These features make it possible to maintain sterility during all the steps of EC seeding. This was documented by negativity of all bacteriological assays performed . Moreover, the RD can simultaneously support three vascular grafts with different lengths (20, 40, and 60 cm) and diameters (4-8 mm). EC seeding is performed in the climatized chamber (37 °C; 5 % C02) with constant rotation (0.1 …

University Of Texas At Tyler Catalog, 1992-1994, University Of Texas At Tyler

Catalogs

Archives Space instance: https://archivesspace.uttyler.edu/repositories/2/archival_objects/22366

Santa Clara Magazine, Volume 34 Number 2, Winter 1992, Santa Clara University

Santa Clara Magazine

12 - 3 PATHS TO POLITICS Dee Dee Myers '83, Gary Serda '82, and Janet Napolitano '79 have taken three decidedly different roads to political careers. By Kathy Daile-Molle '85

18 - WHAT DO YOU WANT TO BE WHEN YOU GROW UP? Increasingly, people are finding themselves making several career transitions throughout their work lives. By Mike Brozda '76

22 - EL CENTRO: THE EYE OF THE STORM For San Jose's Hispanic community, this mental health clinic, whose counselors are primarily SCU grads, provides a respite from the turbulence of life in a strange culture. By Susan Frey

24 - …

Reactogenicity Of Biomaterials As Studied By Biochemical, Morphological And Ultrastructural Techniques, Leonid I. Slutskii, Natalya A. Sevastjanova, Ivetta L. Ozolanta, Irina V. Kuzmina, Laimdota E. Dombrovska

Cells and Materials

Reactogenicity is a characteristic of biocompatible materials that provokes the reparative and proliferative reaction of connective tissues, a compulsory stage of which is inflammation. Thus, reactogenicity studies should include experiments in vivo. A quantitative assessment of reactogenicity can be obtained by subcutaneous implantation of standard olive-shaped specimens covered by the biomaterial under study followed by biochemical, histological and scanning electron microscopical studies of the capsule developing around the implant. Reactogenicity of surgical threads is evaluated by semiquantitative histological analysis of the wound healing process after suture application. Biomaterial reactogenicity can be modified by changing the structure of the surface and …