Digital Commons Network^™

Development Of A Water Temperature Modeling Platform To Support Short- And Long-Term Water Temperature Management In Reservoir-River Systems, Michael Deas, Yung-Hsin Sun, John Degeorge, Benjamin T. Saenz, Thomas A. Evans, Scott Burdick-Yahya, Stephen Andrews, Jeff Schuyler, William Candy, Lin Zheng, Scott Wells, Multiple Additional Authors

Civil and Environmental Engineering Faculty Publications and Presentations

The U.S. Department of the Interior, Bureau of Reclamation (Reclamation) supports water temperature management for fishery species protection in downstream river reaches below Central Valley Project (CVP) reservoirs in the Sacramento, American, and Stanislaus River systems. The Water Temperature Modeling Platform (WTMP) Project was initiated to modernize and enhance modeling capabilities to predict summer–fall water temperature through reservoir cold water pool management using temperature control facilities designed for temperature management. The WTMP supports forecasts, historical analyses, and long-term planning efforts and advances previous modeling approaches by using an integrated modeling platform. This platform includes a data management system that acquires …

Road Performance Evaluation Of Preventive Maintenance Techniques For Asphalt Pavements, Fansheng Kong, Yalong Li, Ruilin Wang, Xing Hu, Miao Yu, Dongzhao Jin

Michigan Tech Publications

Preventive maintenance treatments are widely applied to asphalt pavements to mitigate deterioration and extend service life. This study evaluated four common technologies: a high-elasticity ultra-thin overlay, an Stone Mastic Asphalt (SMA)-10 thin overlay, micro-surfacing (MS-III), and a chip seal. Laboratory testing focused on skid resistance, surface texture, and low-temperature cracking resistance. Skid resistance was measured with a tire–pavement dynamic friction analyzer under controlled load and speed, while surface macrotexture was assessed using a laser scanner. Low-temperature cracking resistance was determined through three-point bending beam tests at −10 °C. The results showed that chip seal achieved the highest initial friction and …

A Feasibility Study Into The Usability And Application Of An Unmanned Aerial Vehicle For Aircraft Inspection And Quality Assurance Inspections, Reece P. Bhave

Journal of Aviation Technology and Engineering

The global aviation industry is often characterized as one of the safest modes of transportation in the modern world. With an abundance of quality assurance inspections and checks to determine operations safety, modern-day commercial aircraft that are utilized for passenger and cargo flights are held to a higher safety standard defined by regulatory bodies, such as the Federal Aviation Administration in the United States of America and the European Union Aviation Safety Agency in the European Union. While these quality standards are maintained via a series of inspections, checks, and preventative maintenance procedures, they are limited to only visual or …

Comparison Of Liu-Type Estimator For Multicollinearity In Fuzzy Logistic Regression Model, Ayad Habib Shemail, Ahmed Razzaq Al-Lami, Amal Hadi Rashid

Iraqi Journal for Computer Science and Mathematics

This article addresses the fuzzy logistic regression model under conditions of multicollinearity, which causes instability and inflated variance in parameter estimation. In this model, both the response variable and parameters are represented as fuzzy triangular numbers. To overcome the multicollinearity problem, various Liu-type estimators were employed: Fuzzy Maximum Likelihood Estimators (FMLE), Fuzzy Logistic Ridge Estimators (FLRE), Fuzzy Logistic Liu Estimators (FLLE), Fuzzy Logistic Liu-type Estimators (FLLTE), and Fuzzy Logistic Liu-type Parameter Estimators (FLLTPE). Through simulations with various sample sizes and application to real fuzzy data on kidney failure, model performance was evaluated using mean square error (MSE) and goodness of …

Software Engineering Approach To Enhancing Privacy Protection: Automated Face Blurring Using Deep Learning In Arab Social Media, Yasmin Makki Mohialden, Nadia Mahmood Hussien, Mostafa Abdulghafoor Mohammed

Iraqi Journal for Computer Science and Mathematics

In the age of digital media, securing personal identities in shared material, especially on social media, has become a significant challenge. This research leverages software engineering to automate face blurring in photographs of Arab social media personalities. It proposes a system that integrates sophisticated deep-learning algorithms with standard image processing within a robust software architecture. This modular system is scalable, maintainable, and compatible with digital media platforms. Gaussian blur is applied to protect privacy once convolutional neural networks (CNNs) identify faces. The system’s efficiency and accuracy are enhanced by OpenCV and NumPy. In experiments, this system consistently identifies and blurs …

Two-Factor Authentication Software For Bluetooth Pairing Between Mobile And Pc Operating Systems, Sundos A. Hameed Alazawi, Abbas A. Abdulhameed, Mostafa Abdulghafoor Mohammed, Thekra Abbas

Iraqi Journal for Computer Science and Mathematics

Bluetooth devices actively broadcast software when pairing to connect. Even during the connection process, the connection can be monitored to view information about the transmission. Using this information, anyone can hijack your existing connection and steal data. Bluetooth connections can be single or multiple. Thus, while connecting to a device, the same device could be simultaneously connected to another device. To avoid this problem, a new software is proposed to support the ID-based authentication process for paired devices by integrating an authentication method based on the biometric features of the device owner. The proposed two-factor security authentication system for pairing …

From Model To Behavior: Methodological Challenges In Using Fuzzy Cognitive Maps To Represent Mental Models, Catherine Elizabeth Moore

Dissertations and Theses

This dissertation examines the use of Fuzzy cognitive maps (FCMs) as representations of mental models and how these representations connect to individual behavior. Fuzzy cognitive maps (FCMs) are semi-quantitative models that encode cause-and-effect structures as directed graphs. They are frequently used to represent individuals' knowledge structures/mental models and should in theory correlate to actions and decisions of individuals; however, this correlation has yet to be explored in a systematic manner. This dissertation represents the first step in experimental research on the connection between FCMs and individual behavior. It examines two theories of how humans use mental models, one based on …

Transparent Eeg Analysis: Leveraging Autoencoders, Bi-Lstms, And Shap For Improved Neurodegenerative Diseases Detection, Badr Mouazen, Ahmed Bendaouia, Omaima Bellakhdar, Khaoula Laghdaf, Aya Ennair, El Hassan Abdelwahed, Giovanni De Marco

Manufacturing & Industrial Engineering Faculty Publications

Highlights

• Novel hybrid architecture: Combined autoencoders with bidirectional LSTM networks for enhanced EEG signal classification, achieving 98% accuracy in distinguishing AD, FTD, and healthy controls.

• Explainable AI integration: Implemented SHAP (SHapley Additive exPlanations) framework to enhance model transparency and identify entropy as the most influential feature for neurodegenerative disease detection.

• Optimal temporal segmentation: Demonstrated that 5-s EEG windows with 50% overlap provide the best balance between classification accuracy and computational efficiency.

• Comprehensive feature extraction: Utilized Power Spectral Density (PSD) analysis across standard frequency bands (Delta, Theta, Alpha, Beta, Gamma) following autoencoder-based dimensionality reduction.

• Superior performance validation: Outperformed traditional machine learning …

  ---

  Go to article

Energy-Aware Optimal Reconfiguration Of A Heterogeneous Connected And Automated Vehicle Cohort On A Limited-Access Highway, Pruthwiraj Santhosh, Darrell Robinette, Daniel Knopp, Jeffrey Naber, Jungyun Bae

Michigan Tech Publications

This paper presents an optimized vehicular reordering methodology designed to minimize energy consumption within heterogeneous cohorts operating at constant velocity on limited-access highways. The approach addresses the challenge of optimizing vehicle sequencing by considering both aerodynamic drag reduction benefits and the energy costs of reconfiguring a cohort from a stochastic initial state. This study provides empirical validation through on-road vehicle tests, demonstrating significant energy savings, achieving up to 10% reduction in axle energy for optimally configured cohorts compared to independent operation. A System of Systems (SoS) simulation environment, integrating micro-traffic, validated powertrain, and aerodynamic drag reduction models, was developed to …

Underwater Acoustic Integrated Sensing And Communication: A Spatio-Temporal Freshness For Intelligent Resource Prioritization, Ananya Hazarika, Mehdi Rahmati

Electrical and Computer Engineering Faculty Publications

Underwater acoustic communication faces significant challenges including limited bandwidth, high propagation delays, severe multipath fading, and stringent energy constraints. While integrated sensing and communication (ISAC) has shown promise in radio frequency systems, its adaptation to underwater environments remains challenging due to the unique acoustic channel characteristics and the inadequacy of traditional delay-based performance metrics that fail to capture the spatio-temporal value of information in dynamic underwater scenarios. This paper presents a comprehensive underwater ISAC framework centered on a novel Spatio-Temporal Information-Theoretic Freshness metric that fundamentally transforms resource allocation from delay minimization to value maximization. Unlike conventional approaches that treat all …

Detecting Electrical Submersible Pump (Esp) Failures And Estimating Run Life Using Artificial Neural Networks, Mostafa Ahmed Sobhy

Theses and Dissertations

Electric Submersible Pumps (ESPs) are one of the important artificial lift methods for sustaining production in mature and high-water-cut wells; but may suffer frequent failures due to mechanical, electrical, hydraulic, chemical, and operational failures. These failures can yield substantial deferred production and intervention costs. Plenty of ESP installations are fitted with downhole sensors. Yet, it is observed that the current industry practice underutilizes the wealth of available sensor and operational data and lacks standardized, explainable failure-type identification and classification.

In this thesis, a comprehensive Machine Learning (ML) and Deep Learning (DL) framework was introduced for ESPs that simultaneously estimates remaining …

A Framework For Test Planning Of A Vision System Supporting Aerial Refueling, Jonathon K. Parry, Donald H. Costello, Michael D. M. Kutzer, Charles J. Doherty, Sarah M. Hubbard

Journal of Aviation Technology and Engineering

This essay presents a framework for evaluating a computer vision system providing perception for an uncrewed aircraft completing the automated air-to-air refueling (A3R) task. As the Department of Defense acquires capabilities that exhibit increasing levels of autonomy, the test and evaluation community must adapt the current framework to provide airworthiness officials the information required to accurately access the risks associated with the system underdoing testing. Following a brief introduction to A3R, this essay lays out a testing framework that leverages dendritic analysis and effectively deconstructs the critical issue into measurable data elements that can be used to support test and …

Ada-Application Of Decision Analysis For Developing A Healthcare System To Predict Fetal Health, Melfi Alrasheedi, Theyazn.H.H Aldhyani

Iraqi Journal for Computer Science and Mathematics

A fatal health condition involves an unborn baby that persists throughout the embryonic stage until delivery. The fetus grows and develops during each trimester of pregnancy. Obstetricians may detect fetal anomalies and select medical interventions based on cardiotocogram (CTG) data. However, the obstetrician's visual assessment of CTG data can sometimes be subjective or inaccurate. Therefore, automated analysis using machine learning approaches for CTG data is essential. This research employs decision analysis techniques, including decision trees (DT), gradient boosting (GB), and type-2 fuzzy neural networks (FNN), for prenatal analysis and prediction. The system was tested using a standard dataset consisting of …

Retracted: Hotspot Issue Handling And Reliable Data Forwarding Technique For Ocean Underwater Sensor Networks, Omar Adil Mahdi, Yusor Rafid Bahar Al-Mayouf, Sameer Sami Hassan Al-Obaidi, Bourair Al-Attar, Hamed Balogun, Suleman Khan

Iraqi Journal for Computer Science and Mathematics

Underwater Wireless Sensor Networks (UWSNs) have emerged as a promising technology for a wide range of ocean monitoring applications. The UWSNs suffer from unique challenges of the underwater environment, such as dynamic and sparse network topology, which can easily lead to a partitioned network. This results in hotspot formation and the absence of the routing path from the source to the destination. Therefore, to optimize the network lifetime and limit the possibility of hotspot formation along the data transmission path, the need to plan a traffic-aware protocol is raised. In this research, we propose a traffic-aware routing protocol called PG-RES, …

Retracted: Capsule Network Model For Detecting Spoofing Attack In The Internet Of Medical Things (Iomt), Mohammad A. Alsharaiah, Mohammed Amin Almaiah, Mansour Obeidat, Rami Shehab

Iraqi Journal for Computer Science and Mathematics

The Internet of Medical Things (IoMT) has transformed healthcare delivery through real-time monitoring and data exchange. However, this integration of smart medical devices has also introduced critical cybersecurity threats, particularly spoofing attacks, which can compromise patient safety and system reliability. Conventional Intrusion Detection Systems (IDS) often fail to address IoMT-specific challenges such as class imbalance, computational constraints, and the need for real-time adaptability. This study proposes a Capsule Network (CapsNet)-based IDS that leverages spatial dependency modeling and hierarchical feature relationships to detect spoofing attacks in IoMT environments. Using the CICIoMT2024 dataset, we implemented a binary classification framework where spoofing instances …

Application Of Neural Networks For Intelligent Processing Of Sensor Signals In The Control Of Technological Process Parameters, N.R. Yusupbekov, Yu.Sh. Avazov, G.Kh. Rashidov

Chemical Technology, Control and Management

This scientific article investigates the problem of analyzing technological process parameters in the fields of chemistry, energy, and metallurgy based on sensor data and applying intelligent signal processing methods. The main objective is to evaluate the effectiveness of artificial intelligence and deep learning models for intelligent analysis, forecasting, and anomaly detection of data obtained from sensors. Time-series data collected from industrial sensors were analyzed using LSTM (Long Short-Term Memory) and Autoencoder neural networks, as well as the Kalman filter. At the first stage of the study, sensor signals were denoised and their true state was estimated using the Kalman filter. …

Finding The Shortest And Optimal Path With Metaheuristic And Madm Methods, Narmin Ibrahim Hasanli

Chemical Technology, Control and Management

The article had described a method for finding the shortest and most optimal path among cities. The data had been taken from the TSPLIB library, which had provided standard examples for the Traveling Salesman Problem. This approach had integrated the advantages of the meta-heuristic technique and the Multi Attribute Decision Making method to solve the problem effectively. In the first stage, the population based meta-heuristic method ACO (Ant Colony Optimization) had found optimal solutions in large search spaces. The use of pheromone trails, heuristic information and an iterative search process had given the opportunity to find the best or near-best …

Research And Development Of Intelligent Measurement Systems, Odil Abdujalilovich Jumaev, Mahmudov Giyosjon Baqoyevich

Chemical Technology, Control and Management

The article discusses modern methods for developing intelligent measuring systems. Intelligent measuring systems are systems based on intelligent technologies that not only accurately measure physical or chemical quantities, but also have the ability to self-analyze, diagnose and make management decisions. The article comprehensively examines the architecture, components of such systems, the organization of their software and hardware, the relationship of sensors and artificial intelligence algorithms. It also analyzes the practical application and prospects of intelligent measuring systems in such areas as industry, medicine, energy, ecology, transport.

Retracted: Automated Diagnosis Of Orthopedic Patients With Vertebral Column Disorders Using Advanced Mathematical Modeling, Chen Feng, Zhenhua Sun, Xinheng Dai, Hongli Wen

Iraqi Journal for Computer Science and Mathematics

Orthopedic disorders are multifactorial, making accurate diagnosis a significant challenge. This study introduces a novel method for classifying patients into three categories—normal, disc herniation, and spondylolisthesis—using biomechanical parameters derived from diagnostic datasets. To enhance classification accuracy, two meta-heuristic optimization algorithms—the Zebra Optimization Algorithm (ZOA) and Chaos Game Optimization (CGO)—are integrated with Adaptive Boosting (ADAC) and Light Gradient Boosting Machine (LGBM) classifiers. The experimental results reveal that ZOA significantly improves model performance, particularly in the ADAC classifier. The baseline ADAC model achieved a mean accuracy of 0.916, which increased to 0.952 after optimization with ZOA (referred to as the ADZO model). …

Deep Learning And Texture Analysis For Lung And Colon Cancer Predicting, Mohamed M. Neamah, Laith A. Al-Ani, Loay E. George

Iraqi Journal for Computer Science and Mathematics

Cancer remains a major cause of death worldwide, with lung and colon (LC) cancers presenting significant challenges to healthcare systems due to their high rates of occurrence and mortality. Early and precise diagnosis is essential for better patient outcomes. This research utilizes recent advances in deep learning (DL) and texture analysis (TA) to create a reliable predictive model for detecting LC cancer through histopathological images (HPI). A hybrid method is proposed that combines a gray-level co-occurrence matrix (GLCM) for extracting texture features with an adaptive modified EfficientNet B2 model (AM-EfficientNet B2) for deep feature extraction. These features are used to …

Retracted: Software Engineering-Oriented Text Generation And Analysis Using Gpt-2, Nadia Mahmood Hussien, Aumama Mohammed Farhan, Yasmin Makki Mohialden, Qabas Abdal Zahraa Jabbar, Shahbaa Mohammed Abdulmaged, Asmaa Hatem Arif

Iraqi Journal for Computer Science and Mathematics

The research focuses on developing an improved system for generating and analyzing text by combining GPT-2, LSTM, and CNN models to address challenges in automated content creation for software engineering tasks. The system targets specific applications such as requirements engineering, software documentation, and code comment generation. It generates 150-token text samples based on over 100 user-provided prompts. These generated texts are first processed through an LSTM layer to capture semantic meaning, then passed through a CNN module to extract syntactic and semantic features. All outputs are stored in structured CSV files to support future analysis. Evaluation results demonstrate positive impacts …

Clinic Vs. Daily Life Gait Characteristics In Patients With Spinocerebellar Ataxia, Vrutangkumar V. Shah, Daniel Muzyka, Adam Jagodinsky, Hannah Casey, James Mcnames, Mahmoud El-Gohary, Kristen Sowalsky, Delaram Safarpour, Patricia Carlson-Kuhta, Fay B. Horak, Christopher M. Gomez

Electrical and Computer Engineering Faculty Publications and Presentations

Background:

Recent findings suggest that a single gait assessment in a clinic may not reflect everyday mobility.ObjectiveWe compared gait measures that best differentiated individuals with spinocerebellar ataxia (SCA) from age-matched healthy controls (HC) during a supervised gait test in the clinic vs. a week of unsupervised gait during daily life.

Methods: Twenty-six individuals with SCA types 1, 2, 3, and 6, and 13 (HC) wore three Opal inertial sensors (on both feet and lower back) during a 2-minute walk in the clinic and for seven days in daily life. Seventeen gait measures were analyzed to investigate the group differences using …

Data Compression In Additive Manufacturing: Recent Progress And Opportunities, Dongmin Ethan Kang, Wenmeng Tian

Publications

A crucial aspect of quality control for Additive Manufacturing (AM) processes is the acquisition of diverse data from the entire lifecycle of the product. AM data has grown significantly in terms of diversity and volumes, resulting in diverse data formats of increasing volumes, including time series, images, and point clouds. Large quantities of these data are essential for effective in-situ process monitoring and ex-situ non-destructive evaluation. However, this will result in large manufacturing and inspection datasets that are difficult to manage for users, which will delay the broader adoption of AM for mission critical applications. This motivates the urgent need …

Progressive Insights Into 3d Bioprinting For Corneal Tissue Restoration, Ilayda Namli, Deepak Gupta, Yogendra Pratap Singh, Pallab Datta, Muhammad Rizwan, Mehmet Baykara, Ibrahim T. Ozbolat

Michigan Tech Publications

The complex architecture of the cornea, characterized by specifically organized collagen fibrils and distinct cellular layers, poses significant challenges for traditional tissue engineering strategies to replicate its native function. 3D Bioprinting offers a promising solution by enabling the precise, layer-by-layer fabrication of corneal tissues, closely mimicking the essential characteristics needed for vision restoration and long-term graft success. This Review critically examines the key biomechanical, optical, and structural attributes of the cornea necessary for its effective engineering and accurate 3D bioprinting. It provides a comprehensive overview of different 3D bioprinting modalities utilized for corneal tissue engineering and offers insights into potential …

Distributed Coherent Beamforming At 60 Ghz Enabled By Optically-Established Coherence, Drake Silbernagel, Yu Rong, Isabella Lenz, Prithvi Hemanth, Carl Morgenstern, Owen Ma, Nolan Matthews, Nadar Zaki, Kyle W. Martin, John D. Elgin, Jacob Holtom, Daniel W. Bliss, Kimberly Frey

Space Dynamics Laboratory Publications

We implement and experimentally demonstrate a 60 GHz distributed system leveraging an optical time synchronization system that provides precise time and frequency alignment between independent elements of the distributed mesh. Utilizing such accurate coherence, we perform receive beamforming with interference rejection and transmit nulling. In these configurations, the system achieves a coherent gain over an incoherent network of N nodes, significantly improving the relevant signal power ratios. Our system demonstrates extended array phase coherence times, enabling advanced techniques. Results from over-the-air experiments demonstrate a 14.3 dB signal-to-interference-plus-noise improvement in interference-laden scenarios with a contributing 13.5 dB null towards interference in …

Optimizing Object Detection For Remote Monitoring With Owl Ducklink Radios, Colin Ren-Jin Babian

Electrical Engineering

This project develops an AI powered object detection system integrated with OWL DuckLink radios to enable real time remote monitoring. The system benchmarks multiple AI accelerators using a Raspberry Pi 5 to determine their efficiency in low power, long range communication environments. By evaluating the Raspberry Pi 5 CPU (7.62W, 14.5 camera FPS, 3.8 inference FPS), Raspberry Pi AI Camera with Sony IMX500 (6.45W, 30 camera FPS, 9.2 inference FPS), and Raspberry Pi AI Hat with Hailo-8L chipset (7.80W, 30 camera FPS, >30 inference FPS), this project identifies the most effective combination of hardware and software for edge AI applications. …

Restoration Of 6-Axis Industrial-Grade Robotic Arms, Bryce Andrew Paulson, Warren Douglas Howard

Electrical Engineering

The Staubli TX60 and TX60CR are industrial-grade, six-axis robotic arms originally designed to perform complex automation tasks in manufacturing environments. Following their retirement from active industrial use, both units were restored to full operational status. As part of this project, they were reprogrammed to execute a pick-and-place routine using kids shape-sorting toys that mirrors typical workflows found in factory settings. The six degrees of freedom afforded by each robot enable a wide range of motion, making them well-suited for tasks such as material handling, product sorting, and repetitive operations typically carried out by human workers. Each model is equipped with …

A Tailored Analog-To-Digital Converter Architecture For Optimal Performance In Troponin Cardiac Protein Detection, Karem Abdelgawad, Sameh O. Abdellatif

Electrical Engineering

In recent years, the detection of troponin cardiac proteins has emerged as a crucial component in the diagnosis and management of acute coronary syndromes. This paper presents a tailored analog-to digital converter(ADC) architecture specifically designed to enhance the performance of diagnostic systems for troponin detection. Utilizing a 180 nm CMOS process technology, the developed 8-bit Successive Approximation Register(SAR) ADC integrates key components, including a preamplifier, comparator, and a digital-to-analog converter(DAC), to optimize signal processing and ensure accurate data conversion from analog to digital formats. The ADC architecture is evaluated for its ability to achieve a substantial sampling rate of 10 …

Diffusion Mri Biomarkers For Predicting Treatment Outcomes In Infantile Epileptic Spasms Syndrome With Non-Lesional Mri, Daniel Ackom, Scott A. Beardsley, Jennifer Meylor, Kayleigh Butler, Ricardo Vega, Andrew J.D. Crow, Hema Patel, Brian D. Schmit, Pradeep Javarayee

Biomedical Engineering Faculty Research and Publications

Background

Infantile epileptic spasms syndrome (IESS) is a devastating developmental epileptic encephalopathy (DEE) and patients exhibit diffuse white matter alterations and structural remodeling. However, the correlation between these structural changes and brain network properties, or their effect on the efficacy of treatment outcomes in MRI non-lesional IESS patients is not clear.

Method

This retrospective study was conducted on IESS patients using fixel-based analysis (FBA) of diffusion MRI and graph theory analysis of structural connectivity, involving 26 non-lesional IESS patients aged 2 to 12 months and 120 age-matched controls. We further examined the differences between antiseizure medication (ASM) responders and non-responders …

Exopg Maturation And Owl Interface, Duncan Michael Louden

Electrical Engineering

The maturation of the ExOPG buoy generator consists of an interface to facilitate remote data acquisition of an existing battery charge controller. This module telemeters battery controller data including voltage, temperature, and state of battery charge. The data is transmitted to a communication system and is able to be viewed by humans on a 24/7 basis for continuous operation and human usage. The module works seamlessly as an addition to the existing ExOPG generator, and it does not interfere with any existing and planned components of the generator. The module is highly efficient and draws minimal power from the existing …