Effect Of Load Variations On Power Quality And Ev Battery Performance In Vehicle-To-Grid System, Jitender Kaushal, Rahul Paswan

Mansoura Engineering Journal

Vehicle-to-Grid (V2G) technology enables the exchange of electricity between electric vehicles (EVs) and the utility grid, helping improve the integration of renewable energy sources and the grid's flexibility. Load-dependent power quality disturbances can affect the performance and reliability of V2G systems, which in turn can negatively impact system and battery operation. This study investigates the effect of resistive, inductive and nonlinear loads on the electrical performance and battery behaviour of a bidirectional V2G system. A complete MATLAB/Simulink model was developed to investigate the grid voltage, current, frequency, THD and the battery voltage, current and state of charge. The model uses …

Made On Mars: Design And Manufacturing Of Structural Polymer-Regolith Composites, Pailey M. Vitale

Williams Honors College, Honors Research Projects

Human exploration of Mars is constrained by harsh environmental conditions and the prohibitive cost of transporting materials from Earth. Long-term sustainability requires the local production of mechanical and structural components using resources available on Mars, thereby minimizing payload mass. This project investigates polymer–regolith composites derived from atmospheric CO₂ and mineral-rich regolith as a pathway toward in-situ manufacturing. These composites, when compatible with additive manufacturing, could replace imported plastics, enable on-demand fabrication, and support closed-loop recycling systems. The objective is to design and evaluate polymer–regolith composites that maintain mechanical integrity and environmental resistance under Martian conditions, including extreme temperature swings, radiation …

A 1d Symmetric Interior Penalty Discontinuous Galerkin Solver In Rust, William Aey

Williams Honors College, Honors Research Projects

This honors project will build a 1D Symmetric Interior Discontinuous Galerkin (SIPDG) solver in Rust for Stum-Liouville type problems such as the Poisson equation, with Robin, Dirichlet, and Neumann boundary conditions. The work will cover the full pipeline: starting from the strong form of the PDE, deriving the DG weak form, implementing element and interface operators, and assembling or apply the discrete operator. Rust's safety and concurrency (e.g, via Rayon) will be used to explore serial and parallel performance. A test-driven development approach will be used to maintain a strong suite of tests. The project will result in a documented …

Ai-Based Porosity Detection In Babbitt Bore Turning, Kaylee Leggett, Hannah Adams Gemmell, Kaisa Shingleton

Williams Honors College, Honors Research Projects

For this project, an external company reached out to the University of Akron requesting assistance with defect detection during their vertical turning operations. As babbitt is removed in a vertical turning process, it occasionally reveals defects, mainly porosity, which can lead to costly downstream failures of the part. Current inspection techniques involve use of dye penetrant, which is time consuming, labor intensive, unergonomic, and a source of human error. The goal of the project is to create an alternative inspection method using an AI-based machine-learning model. After the turning operation, a camera is deployed to perform an in-place inspection, taking …

Printer For Music Box, Chad Lewis, Caleb Murawski, Zion Smith, Bryan Tibbs

Williams Honors College, Honors Research Projects

The traditional method of creating music box sheet music involves manually punching holes into a paper strip using a hand-operated hole punch. This process involves precise knowledge of each note’s location and the ability to achieve perfect accuracy for hours.

The goal of this system is to automate this process, significantly reducing the time required while greatly improving the accuracy of the resulting music box playback. The user simply uploads a MIDI file of their choice into a user-friendly application. Here, the file is modified based on the user’s needs and sent to an automated hole-punching system to punch the …

Crashheart, Ellie Riekert, Kennady Skidmore, Madison Furino

Williams Honors College, Honors Research Projects

This project aims to develop an XR (extended reality) iPad training system to improve pediatric crash cart preparedness among nurses and clinical staff at Akron Children’s Hospital. In emergencies such as respiratory failure or shock, quick and accurate access to crash cart supplies is vital, yet opportunities for hands-on practice are limited. Current nurse training relies on PowerPoint instruction or costly physical simulations, reducing engagement and skill retention. Our interactive XR solution replicates the crash cart’s layout and contents, allowing users to practice identifying and retrieving critical items in a realistic environment without using physical supplies. The system will be …

Seat Belt Data Collection Methods: A Comparison Between States And National Guidelines, Madison R A Richards

Williams Honors College, Honors Research Projects

Thousands of fatalities related to vehicle crashes occur every year. One method to reduce fatalities is to encourage seat belt use compliance. To promote statistics regarding seat belt use, there first must be reliable data on seat belt compliance and this comes from good survey design.

This report is a comparative analysis of seat belt data collection methodologies for Ohio, Michigan, and Indiana, in addition to an evaluation of how each state aligns with standards set by the National Highway Traffic Safety Administration (NHTSA). The framework for this analysis focuses on NHTSA’s five core survey design requirements: selection of observation …

Security Onion Ids Case Study: Detecting And Investigating Threat Traffic Using Suricata, Zeek, And Pcap Evidence, Daryna Myroniuk

Williams Honors College, Honors Research Projects

A key component of cybersecurity is network intrusion detection, which is used to examine network traffic for any malicious activity. Many organizations deploy intrusion detection systems (IDS) but still face challenges such as validating detections, investigating alerts in a timely manner, and producing clear and repeatable evidence of what has occurred, especially when live traffic capture may be limited to risks, permissions, or privacy concerns. The goal of this project was to use Security Onion, which includes Suricata and Zeek to create and demonstrate a controllable and manageable evidence-based IDS investigation workflow. This project is focused on deploying and validating …

Analyzing Network Traffic And Data Exfiltration Via Smb In Post-Vm Escape Scenarios, Noah M. Disanza

Williams Honors College, Honors Research Projects

Virtual machines (VMs) play a crucial role in modern IT infrastructure environments by providing isolation and enhanced security, among other things, for both personal and corporate systems. VMs are heavily rely upon to safely test malware, manage infrastructure, and reduce risk to host systems. This reliance is so substantial that the idea of reducing risk to the host system is believed to be erasing risk entirely. However, this mindset has shown to be challenged time and time again by the emergence of exploits known as virtual machine escapes. These exploits allow malicious actors to break out of the virtualized environment …

Rapid Skin Stapler, Emma J. Patterson, Allison M. Milligan, Morgan E. Dunlap

Williams Honors College, Honors Research Projects

Severe burn injuries frequently require split-thickness skin grafts, with metal surgical staples serving as the current standard for fixation. While staples provide rapid and secure placement of graft material, they also introduce significant challenges. Removal is painful, time-consuming, and often requires sedation in pediatric patients, leading to added risk, resource strain, and poor patient experience. These drawbacks highlight the need for improved fixation methods that maintain graft stability while reducing procedural burden. This project applies the engineering design process to address these challenges through identification of user needs, translation into design inputs, risk assessment, and development of a prototype aimed …

Ai-Based Music Mood Analysis With Historical And Real-Time Data, Biswash Bhattarai

Williams Honors College, Honors Research Projects

The Music Mood Analyzer Dashboard identifies and visualizes the emotional tone of songs using audio features like tempo, energy, and valence. It classifies tracks into moods such as happy, sad, or calm and presents insights through an interactive dashboard. The project combines music analysis and data visualization to help users understand how sound relates to emotion.

Effects Of Hofmeister Ions On Lower Critical Solution Temperatures Of Poly(N-Isopropylacrylamide) And Poly(Vinyl Methyl Ether), Joseph Joaquin

Williams Honors College, Honors Research Projects

The goal of this study is to compare how four different Hofmeister anions (Cl-, SCN-, F-, and I-) affect the Lower Critical Solution temperature (LCST) on two thermo-responsive polymers: poly(N-isopropylacrylamide) (pNIPAAM) and poly(vinyl methyl ether) (PVME). pNIPAAm is commonly used in the environmental applications such as monitoring, oil-water separations, or antifouling materials, and in medical industry from drug delivery to tissue engineering. When pNIPAAM or PVME reaches a temperature above their LCST, they become hydrophobic, and the polymer chains coiled, leading to their aqueous solutions turn opaque. PVME exhibits a similar LCST as that of pNIPAAM, so it can be …

Stem Integration Through Environmental Data Analysis For Real-World Problem Solving, Abigail Erskine

Indiana STEM Education Conference

Integrating authentic, environmental-based data can make STEM instruction more meaningful. As part of a broader high school STEM curriculum, I designed a lesson that connects mathematical and statistical concepts, technology, and environmental data through environmental data analysis to develop real-world problem solving. Using local deer mortality data, I examined how descriptive statistics and data interpretation could reveal population and ecological patterns. Designing with real data highlighted how mathematics can serve as a lens for understanding environmental issues and promote connections across STEM disciplines. This research brief focuses on the instructional design and reflection as the lesson designer.

Breech Baby, Madison Kaufman, Cassidy Allen, Lilian Mills

Williams Honors College, Honors Research Projects

Our project aims to develop a non-invasive device to assist in turning breech babies to a head down position before delivery. Pregnant women facing breech presentations often need safe and effective solutions, yet current options like external cephalic version (ECV), maternal positioning techniques, and cesarean sections can present challenges. Key barriers include variability in maternal and fetal anatomy, patient comfort, compliance, and training for healthcare providers, along with cost and insurance concerns.

Our innovative device will address these issues by providing clear guidance and support throughout the process. It will prioritize minimizing discomfort and risk, ensuring adaptability for various stages …

Undergraduate Student Support Survey And Scoring Guide, Kerrie A. Douglas, Adrian Gentry, Julie P. Martin, Tiantian Li

School of Engineering Education Working Papers

No abstract provided.

Surface Immobilization Of Stimuli-Responsive Polymers Using A Network Of Aminopropyltriethoxysilane, Walter Bungard, Ryan Nixon

Williams Honors College, Honors Research Projects

The goal of this honors project is to develop a cost-effective and accessible method for entrapping stimuli-responsive polymers onto solid substrates using aminopropyltriethoxysilane (APTES). The entrapment network process will first be replicated on glass or silicon using APTES and poly(N-isopropylacrylamide), involving spin coating and thermal annealing to chemically bond the polymer to the substrate. Once validated, the method will be applied to other stimuli-responsive polymers, including thermo-responsive, electroactive, and pH-sensitive types, with APTES as a control. For each sample, film stability, responsiveness, and surface behavior will be evaluated using contact angles, optical microscopy, and spectroscopic analysis, followed by statistical evaluation. …

Network Merge, Alexander York

Williams Honors College, Honors Research Projects

This project will be simulating the merge of two company's networks. Company A will contain two sties connected with a VPN, and will extend this VPN to one site for Company B. This project will focus on researching how merging a network works, how routes are commonly redistributed across different routing protocols, and how each site can run their own but link servers(DHCP, DNS, etc.). Both sites will be secured from both outside and inside attacks through passwords and other network security features such as VLANs & BPDU Guard.

Adaptive Lighting System, Jacob Samerdak, Ethan Schwartz, Brandon Breen, Matthew Carozza

Williams Honors College, Honors Research Projects

The Adaptive Lighting System is a modular network of components that requires minimal installation in homes. Additionally, all components of the system communicate wirelessly and interface with a mobile application. The system utilizes occupancy and daylight sensors to detect the environment of a room and adjust the lighting accordingly. The system detects ambient lighting as well as occupancy within a room. Using the data collected from the sensors, the system adjusts lighting temperature, color, and brightness. The user can also manually control these settings. The Adaptive Lighting System aims to help regulate circadian rhythm, so there is a configuration in …

Breaking The Vapor Barrier And Scale: Revolutionizing Steel Quenching With Ultrasound Technology, Anthony O. Santos

Williams Honors College, Honors Research Projects

The quenching process is a fundamental heat treatment used to enhance material properties by heating steel to its austenitizing temperature and rapidly cooling it to form high-strength martensite. However, this process is often hindered by two surface barriers: the Leidenfrost effect (vapor blanket) and oxide scale. These cooling limitations restrict the use of steel in high-performance aerospace applications due to inconsistent material properties and unpredictable engineering properties. This research investigates the use of fully submersible, 50-watt 40 kHz ultrasound technology to improve cooling rates in a Jominy test [4]. Through numerical simulations and experimental validation, the study demonstrates that acoustic …

Analyzing Network Traffic Utilizing Aws Developer Tools And Artificial Intelligence, Michael K. Spatafore

Williams Honors College, Honors Research Projects

Alert fatigue occurs during long hour shifts and high stress situations. Constant notifications and on-call shifts can create overstimulation and desensitization, which leads to delay responses and increased vulnerability. Malicious actors have weaponized alert fatigue by storming a network with a vast number of low-priority events to mask their malicious activity, also known as alert storming. This project focuses on the reduction of alert fatigue by automating log analysis with Large Language Models. The project uses Amazon Web Service and its many features, such as Amazon GuardDuty, Lambda, and Bedrock. Amazon GuardDuty detects anomalies, then lambda sends those anomalies to …

Optimized Returning Floating System (Orfs/Orfeus), Jordan A. Mcclelland, Adam J. Belluardo

Williams Honors College, Honors Research Projects

We are developing a proof-of-concept modified guitar tremolo system for an electric guitar that can automatically optimize tuning adjustments when a player transitions between tuning schemes using a cam system. Currently, changing tunings takes about 10–15 minutes because adjusting the tension on one string affects the tension of the others. Our design aims to compensate for these interactions and significantly reduce the time required to switch tunings.

Dashboard And Racing Telemetry, Cole Barach, Jacob Koshel, Ethan Zifzal, Matthew Sullivan

Williams Honors College, Honors Research Projects

The main goal of the project is to design and manufacture a combined dashboard and data logger for the vehicles produced by the Zips Racing design team. The dashboard will intuitively display real-time information to the driver and record all received information while driving. This information may be pulled off the device later for performing data analysis. This project will incorporate custom PCB design, surface mount soldering, embedded software development, and the CAN communication protocol.

Akron Soap Box Derby Super Kids Car, Alexis Schultz, Cooper Sites, Sean Stevenson

Williams Honors College, Honors Research Projects

This project aims to redesign the All-American Soap Box Derby Super Kids vehicle to enhance safety, accessibility, and performance while maintaining full compliance with official regulations. The Super Kids program enables children with physical and cognitive disabilities to race alongside a co-pilot, but the current vehicle design presents challenges in stability, entry/exit accessibility, and control—especially following recent regulation changes that increased vehicle speed. The redesigned car will focus on improved ergonomics, lightweight construction, and structural integrity within a $1,000 budget and a 165 lb weight limit.

An iterative engineering design process will guide the project through research, CAD modeling, FEA …

Aquaflow Pro, Ashton Henley, Jeannie Fritz, Khalin Rubbo

Williams Honors College, Honors Research Projects

Changing aquarium water is a hassle, and when done incorrectly, it will result in changes in water quality and potential harm to aquatic life. Aquarium water changes are crucial in removing toxins such as ammonia, nitrites, and nitrates. There is a need for an automated, stressless fish tank water-changing solution that ensures aquatic safety. To this end, an automatic temperature-controlled fish tank water changing system was designed, carrying out a water change for a designated main tank in which water heated within an inbound reservoir is pumped into the tank to replace the outbound water, responding to both the tank’s …

Development Of A Signature Model For Predicting Normal Boiling Point Using Machine Learning, Mackenzie Karabin

Williams Honors College, Honors Research Projects

The goal of this project was to utilize the Signature molecular descriptor to construct a predictive model for computing the normal boiling point using a 4856-compound dataset. The final model intends to be applied to screening compounds whose experimental normal boiling point values are not readily available. Compounds were deconstructed into their height-1 atomic Signatures, resulting in 225 unique descriptors for the dataset, which were used as independent variables for creating the model. Machine learning (ML) techniques were employed to evaluate the applicability and accuracy of different ML models for predicting normal boiling point using the Regression Learner App in …

Clear Skies, Avery C. Munn

Williams Honors College, Honors Research Projects

Air quality impacts public health, environmental sustainability, and quality of life. However, accurate and easily accessible short-term air quality forecasting is challenging to find. This project, Clear Skies, presents a machine learning–based system for forecasting next-day Air Quality Index (AQI) levels across regions in Ohio. By using historical pollutant data with variables such as temperature, humidity, wind speed, and atmospheric pressure, the system finds relationships that traditional statistical models often don’t show.

Machine learning models are evaluated alongside AI techniques to find the environmental factors that influence AQI predictions. This helps reduce the “black box” nature of many AI systems …

Analysis Of Stem Activities At Preschool And Primary School Levels In The Usa's And Turkiye's Educational Reports Based On The Engineering Design Process, Cetin Kursat Bilir, Mehmet Fatih Öçal, Esra Yilmaz Bilir

Indiana STEM Education Conference

This comparative study examines STEM activities from preschool to grade 4 in the United States and Türkiye using the Engineering Design Process (EDP) framework. Five activities from each country were selected based on national standards (NGSS in the U.S.; Ministry of National Education STEM Standards in Türkiye). Using qualitative content analysis, we examined how each activity reflects the stages of the EDP. The findings highlight ways to strengthen STEM education through design-based learning and offer teachers practical insights for integrating engineering design into early education.

Indiana Bridges: Inclusive Stem Learning For Students With Down Syndrome, Elizabeth N. Christian, Jeffrey A. Nowak

Indiana STEM Education Conference

This research brief explores how materials and the engineering design process may be used to support inclusive STEM learning for students with Down syndrome. Conducted as a series of five consecutive workshops over a summer break, the Indiana Bridges project introduced engineering concepts through bridge-themed sessions created to be accessible for all ages and abilities. Students ages 11-20 with Down syndrome and two teacher education faculty participated in five workshops. Family members and center support staff frequently participated. Bridges from across the state of Indiana and classroom materials familiar to the participants provided entry points while new materials extended their …

More Than A Design Task: How Questions Shape Student Attention And Learning, Isaiah Kent-Schneider

Indiana STEM Education Conference

Incorporating engineering design activities into education has the potential to transform learning and students' educational experiences. However, when teachers implement engineering design without asking purposeful questions to focus students' attention, students tend to focus on the task but miss out on the intended learning of underlying science and math concepts. This research brief provides practical examples of questions teachers can use to focus student attention during engineering design activities.

Proactive Safety Reasoning In Human-Robot Collaboration In Disassembly Through Llm-Augmented Stpa And Fmea, Morteza Jalali Alenjareghi, Fardin Ghorbani, Samira Keivanpour, Yuvin Adnarain Chinniah, Sabrina Jocelyn

Études primaires

Disassembly tasks in human–robot collaboration (HRC) environments present safety challenges due to hazardous materials, control system variability, and physically demanding operator tasks. To address these challenges, we propose an AI-augmented risk assessment framework integrating System-Theoretic Process Analysis (STPA) and Failure Mode and Effects Analysis (FMEA). This framework is implemented in four configurations: Term Frequency– Inverse Document Frequency (TF-IDF), Fine-tuned Large Language Models (LLMs), Retrieval-Augmented Generation (RAG), and RAG with a structured Knowledge Graph (KG) built from safety standards. The system supports real-time, standards-compliant safety reasoning by generating interpretable, context-specific recommendations. We evaluate these configurations across GPT-3.5 TURBO, GPT-4o, GPT-4.1, and …