Digital Commons Network^™

A Class Of Pattern Recognition Machines, Shaw Yih Chung

Masters Theses

"The classification of signals through the use of pattern recognition techniques may be viewed as a statistical classification problem since at least some pattern classes are analog signals which have been contaminated by additive noise. In order to represent these signals at the input of a pattern classifier they are sampled and a vector and an m-dimensional vector space used to describe the pattern. Consequently, these pattern samples are processed to determine the parameters of the statistics. In this study the additive noise was assumed to be Gaussian in nature. This study was based on a priori knowledge of the …

Digital Filter Design And Evaluation, David Alvarado MaguiñA

Masters Theses

"This thesis is concerned with the application of two digital filter design techniques to the Pade approximate continuous filters. The (m, n) Pade approximant has a numerator polynomial of degree n in s and a denominator of degree n in s. The (n-1, n) approximates are desirable for linear phase low pass filters, pulse delay circuits without initial condition errors, and pulse forming networks. A collection of plots is shown to demonstrate the quality of the approximations in the frequency domain, as far as amplitude and phase are concerned. These low pass approximants are normalized to a cut-off frequency of …

The Realization And Application Of Parallel Linear Feedback Shift Registers, Ross K. Heitzmann

Masters Theses

"Two methods for serial-to-parallel transformation of linear feedback shift registers are briefly discussed. A third method for transformation is rigorously developed using a next-state and output equation representation of the linear feedback shift register. An algorithm is developed for simplifying the parallel machine resulting from serial-to-parallel transformation, where simplification is defined as reduction in the required number of modulo 2 adders. A computer program incorporating serial-to-parallel transformation and the simplification algorithm is provided "--Abstract, page ii.

A New Performance Index For Sensitivity And Energy Optimization., Mohamed Zafer Dajani

Masters Theses

"The principal aim of this thesis is to present a new index of performance which when minimized will simultaneously optimize the system energy and sensitivity function of a multivariable linear control system. With this performance index it is usually desirable to discriminate between the sensitivity factor and the energy term by weighting them differently. Two types of weighting factors are presented. Since it is not easy to minimize that performance index for all types of problems, further research is suggested to find methods of solution for such problems. Illustrative examples demonstrate the optimization process and the type of assumptions needed …

Reviews Of Books And Papers In The Computer Field, James H. Tracey

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

An Analysis Of The Signal Processing In A Radio Altimeter Utilizing Random Angle Modulation, Donald F. Post

Electrical and Computer Engineering ETDs

Excerpt from the introduction:

This paper presents an analysis of the signal processing in a continuous wave, fixed-range, radio altimeter which utilizes random angle modulation, i.e., the modulating function is a sample function from a random process. The mathematical model of the altimeter is shown in block diagram form in Figure 1, and the physical situation in which the altimeter operates is illustrated in Figure 2. As shown in Figure 2, the altimeter is assumed to be on the vehicle "V" which has a relative velocity v with respect to the reflecting plane P. The velocity vector might have any …

A Study Of Learning In Adaptive Systems., In Ku Kang

Electrical and Computer Engineering ETDs

The purpose of this study is to investigate the structures of learning processes and their applications to adaptive systems. The learning processes in this study are based on Bayes learning model, which well describes the nature of learning and also is a natural choice from the viewpoint of statistical decision theory.

An Automatic Data Acquisition System For Semiconductor Device Testing, Donald L. Bartling

Masters Theses

"An Automatic Data Acquisition System for determining the Voltage/Current characteristics of semiconductor devices is presented. The system is capable of measuring currents in the range from 10^-10 amperes to 200 milliamperes. The system includes various pieces of commercially available equipment plus several pieces of specially designed and fabricated equipment.

The system yields a maximum of 59 data points each for both the base and collector characteristics of the transistor tested. The system is designed to perform a particular sequence of events. These events are controlled by a specially designed and fabricated piece of equipment called the Control Center.

The …

The Constant Impedance Tapered Lossless Transmission Line, Yu Kuo Chen

Masters Theses

"Considerable work has been done on the theory and development of the distributed RC network which is a special case of the general distributed network type of transmission line.

Sir William Thompson analyzed telegraph cables, assuming the RC line as a model. Oliver Heaviside made numerous contributions to transmission line theory. The solution of a two-wire transmission line with constant parameters R and C is obtainable by direct solution of the telegraphist's equations which are developed from the equivalent circuit of an incremental length of the network. The sinusoidal steady-state solutions of certain tapered RC lines have been exhibited. The …

Analog Simulation Of The Voigt Solid, Richard F. Pohl

Masters Theses

"A method of reducing a mixed partial differential equation with boundary conditions to a form suitable for programming on the analog computer is developed. Presented along with the computer program set up to be used on the EAI TR-48 analog computer is a systematic check procedure to indicate possible computer malfunctions and programming errors. The results of the computer simulation are presented and supported with observed data"--Abstract, page ii.

A Nonlinear Sampled Data Feedback Control System Employing Pulsed Thrust Position Control, John D. Corrigan

Masters Theses

"This thesis shows that reaction jet thrust pulses, each of constant amplitude and time duration, in conjunction with sampled data error information can provide satisfactory position and/or attitude control for space vehicles.

Incremental phase-plane analysis of the system yields a technique for determining system response and suggests a means of compensation. Control system response for the vehicle under the influence of external forces is shown to be satisfactory by digital computer simulation"--Abstract, page ii.

Phase And Amplitude Distributions Of An Unsymmetrically Fed Ground Plane Aperture, Leslie Blumberg

Masters Theses

"An anechoic chamber for use in the B-12 KHz range was designed and built for the purpose of obtaining the far field patterns of antennas and radiation systems. This chamber was evaluated and compared with various types of anechoic chambers from the standpoint of their "room performance."

The anechoic chamber is essentially a room lined with absorbing material, effective at microwave frequencies. The purpose of the absorbing material within the room is to present the reflection of the energy incident upon the walls of the room.

Measurements of the far field radiation pattern of an aperture in a ground plane, …

Determining The Best Computational Method For Simulation, Neil Hertenstein

Masters Theses

"Two related problems are treated in the discussion. First, what is the best computational means to be used to simulate a given system? Second, if hybrid is chosen, how do we assign the problem to the different computers to realize the fullest advantage of the hybrid simulation? Most of the available information in the literature is presented in light of the above questions. It is found that, despite the lack of a precise theoretical solution, much insight can be gained into the problem. A proposed procedure for hybrid assignment and a sample problem using this procedure completes the discussion"--Abstract, page …

Space-Charge Effects As Determined By Initial-Field Conditions, Tsing-Yih Wang

Masters Theses

"A method for calculating the current density passing between two parallel plane electrodes for different values of positive charges as a function of " field at the emitter to field for no charge ratio " is presented.
The problem of the potential distribution between the electrodes has been solved for one particular case in which the positive charges are assumed to be proportional to the field at the emitter. The expressions for the electric field, the velocity of charges, and the charge density as a function of the potential are also presented and plotted as a function of the distance. …

An Investigation Of The Limitations Of The Antenna Range At The University Of Missouri At Rolla, Ronald Earl Nelson

Masters Theses

"The University of Missouri Antenna Range is described and criteria on range components for acceptable operation are discussed. Discussion of the results of an experimental investigation of component systems of the antenna range is presented. Experimental results are compared to criteria for acceptable operation and recommendations for the improvement of the facility is made. Suggestions are made as to its usage at higher frequencies"--Abstract, page ii.

Continuously Tapered Dielectric Matching Transitions For Waveguides, William E. Hord

Doctoral Dissertations

"Dielectric matching transitions at microwave frequencies are used for matching air filled waveguides into dielectric filled waveguides for maser work or into dielectric rod antennas. Also dielectric loading has been shown to improve the performance of the ferrite isolators.

The dielectric matching transitions that have been analyzed in the literature are of the stepped type. The continuously tapered dielectric matching transitions investigated in this dissertation provide increased bandwidth with very little increase of physical complexity.

The dissertation provides an analytical method for analysis and design for the continuously tapered dielectric matching transition. First-order and second-order approximate solutions for both symmetrical …

An Ac Method Of Measuring The Conductivity Of Dielectric Liquids., Henry E. Fischer

Masters Theses

"The problem undertaken in this thesis is the presentation of a method of measuring the conductivity of dielectric liquids in which the liquid is used as the parallel tank circuit of a modified Wien-bridge oscillator. The main advantage of this method is that the frequency of the voltage applied to the liquid can be varied by simply varying the oscillator frequency. This allows the selection of a frequency which is best suited to the liquid in regard to polarization and relaxation time.

An oscillator was designed, built and used in the laboratory to measure the conductivity of the dielectric liquids …

Analysis Of Time-Varying Linear Multipole Filters With Sampled Nonstationary Random Inputs, Ming-Chwan Chow

Masters Theses

"In this thesis an analytical method is developed to determine an optimum time-varying linear filter in order to satisfy the following specifications. The filters are of sampled data multipole form with n inputs and m outputs. The signal of each input is a member of a nonstationary random process, and the signal is corrupted by stationary noise.

The statistical optimization theory developed by Wiener is extended to a linear time- varying filter with nonstationary input. Correlation functions are defined for nonstationary ensembles. The mean- square error is calculated in terms of these correlation functions. By minimization of the mean-square error, …

A Periodic Dielectric Rod Antenna, Robert C. Peirson

Masters Theses

"The periodic dielectric rod antenna structure under consideration consists of identical dielectric rod sections of radius a meters situated on a common axis. These sections are of length 1₁ meters and are separated in free space by distance 1₂ meters.

Field analysis employing Floquet's theorem, in terms of the exemplary TM₀₁ circular mode, gives expressions for the various field components and an eigenvalue equation. Digital solution of this eigenvalue equation establishes the location of propagation bands as a function of frequency. Such bands are characteristic of any periodic wave guiding structure."--Abstract, page ii.

A Method For Approximating A Specified Impulsive Response, Charles A. Gross

Masters Theses

"Given a system's time response, y(t), to a unit impulse, a method is presented by which an approximating function y*(t) may be determined. It is inherent in the method that the transform function Y*(s) is rational. The poles of the approximating function are found from the coefficients of a difference equation, which is made to fit the given data in a least mean square error sense. The zeros are determined by a procedure based on the fact that at a given time the given function and its approximate derivatives are known. Accuracy and implementation of the method are investigated primarily …

Some Effects Of A Non-Uniform Specific Charge Upon Space Vehicle Parameters, Geary L. Leger

Masters Theses

"An equation is derived for the space-charge-limited current of an ion beam when there exist n different species of ions in the beam. The combined effects of non-uniform specific charge and space-charge-limited conditions upon thrust, propellant flow rate, and payload ratio are studied, and a graphical investigation and interpretation is made.

This thesis will show that: (1) The existence of multiply ionized species in an ion beam will increase the space-charge-limited current over that expected in a beam composed of purely singly ionized ions, (2) the thrust produced by the ion beam is independent of the non-uniform specific charge distribution, …

Optimum Linear And Adaptive Polynomial Smoothers, Stanley Bruce Alterman

Dissertations

The design of optimum polynomial digital data smoothers (filters) is considered for linear and adaptive processing systems. It is shown that a significant improvement in performance can be obtained by using linear smoothers that take into account known a priori constraints or distributions of the input signal. The procedure for designing optimum (minimum mean square error) adaptive polynomial data smoothers is then discussed and analyzed. The optimum smoother makes use of a priori signal statistics combined with an adaptive Bayesian weighting of a bank of conditionally optimum smoothers. Use of this technique permits large improvements in performance with a minimum …

The Rimo Filter, Richard Thomas Modafferi

Theses

Up to the present time, there has existed no general method for obtaining the pole locations of minimum-phase constant time delay filters of desired selectivity. Since constant time delay filters are necessary for low distortion FM transmission, and minimum-phase filters are easy to construct and align, a general method for locating the poles of minimum-phase constant time delay filters would be of considerable importance. Presented in this paper is a procedure for locating the poles of minimum-phase constant time delay filters of desired selectivity, using a FORTRAN digital computer program. Two experimental FM receivers were built to test. the new …

Iterative Method In Storage Routing, Mohan Lal Kapoor

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The objective of this study is to examine the feasibility of applying analog computer iterative methods to the study of storage routing.

Determining And Telemetering Snowpack Water Content In Mountainous Terrain, Stephen Davis Clarke

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Snowpack water content is an important parameter in streamflow forecasts. At the present time water content of the snowpack is determined by manual methods, which are often expensive and time-consuming. The use of a pressure pillow to determine water content has shown promise in experimental applications.

The design and analysis of a pressure transducer suitable for use with remote telemetry equipment is presented. The transducer uses changing fluid pressure to vary an inductor.

Telemetry techniques suitable for use on Utah snow courses are analyzed. Emphasis is given to the passive and active remote radio relays.

Thin Film Resistor Deposition, Rollie R. Herzog

Masters Theses

"Thin film techniques may be the key to future miniaturization of electrical equipment. The purpose of this thesis was to develop procedures for deposition of thin film resistors and to test these deposited resistors. Starting with a vacuum system, equipment was designed and built to hold and heat the substrate, monitor the substrate temperature and deposited resistance, and to evaporate the material to be deposited. Resistors were deposited and tested for resistance between resistors, capacitance between resistors, and resistance of resistors. A heat aging test was also used comparing resistors with and without a silicon monoxide coating"--Abstract, page ii.

A Study Of The Effect Of Surface Beveling On Silicon Rectifiers, Gary L. Voorhis

Masters Theses

"The problem in this thesis is to experimentally obtain voltage vs distance data for different angles of bevel, to determine the optimum bevel angle on the basis of minimum surface electric field, and also to determine the location of the maximum surface electric field with respect to the p-n junction. Experimental equipment is constructed and results are graphically illustrated. It is concluded that in general the maximum surface electric field decreased as the bevel angle decreased, that neglecting practical considerations the optimum bevel angle was 3⁰, and that the maximum surface electric field occurred near, but not at the p-n …

A Computer Approach To Transistor Circuit Design, Kwok Chee Hong

Masters Theses

"The design of amplifiers is usually approached through experimental study. This thesis proposes a mathematical approach, using a digital computer to predict the performance of an active transistor circuit (a frequency equalizer circuit to compensate for the RIAA recording frequency characteristics) prior to the actual construction of the physical system. The simple but powerful computer analysis method will be based upon the nodal equations of the complete circuit. The primary aim is to design a circuit which would give a desired frequency-gain characteristic. The complete set of simultaneous complex nodal equations describing the circuit operation is then written. Based on …

Matching Of A Horn Antenna To Its Dense Surrounding Media By The Use Of Artificial Dielectric Methods, Paul Arthur Ray

Masters Theses

"The purpose of this thesis is to design an artificial dielectric slug to match a horn in a media such as water and to discuss a method of determining experimentally its dielectric properties. The design is based on known artificial dielectric methods. The method of determining the dielectric properties is by microwave waveguide reflection techniques. This thesis deals with the theoretical aspects and suggests an experimental method of determining the practicability of such a matching method"--Abstract, page ii.

Equivalent Circuit Of Unsymmetrical Inductance Diode Using Linvill Lumped Model, Donald Lawrence Willyard

Masters Theses

"Integrated circuit techniques and applications are rapidly changing the electronics industry. A problem common to both state-of-the-art approaches to integrated circuit fabrication is that of miniaturizing and integrating inductors. It is found that, for a certain range of injection current levels, certain unsymmetrically doped junction diodes have an inductive small-signal impedance. This thesis discusses the theory of inductance diodes and applies finite difference equations and the Linvill lumped model to the differential equations that describe their carrier flow processes. The static I-V characteristic and the small-signal equivalent circuit at high injection densities are derived. The elements (R,L,C) of this equivalent …