Digital Commons Network^™

A Design Of A High-Voltage Ionization Test Chamber., Jorge Anibal Chiriboga

Masters Theses

"The purpose of this thesis was the design and construction of a test ionization chamber which can be used in the teaching and research of several phenomena involving electrical breakdown of gaseous insulation materials.

Principal electrical discharge laws and effects, as well as their performance, are discussed as bases upon which the chamber was designed. The chamber presents the necessary characteristics for being used as a "multi-purpose" test chamber; in other words, it has the conditions for being used in the study of many electrical discharge phenomena"-- Abstract, p. ii

Further Comments On “Two Counterexamples To Aizerman's Conjecture”, D. Ronald Fannin

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

Energy, Environment And Incremental Decision Making, Jeff V. Conopask, Robert R. Reynolds Jr.

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

During the late 1960's and early 70's a variety of environmental/energy oriented legislation was enacted by the Congress. The most important of these acts, the National Environmental Protection Act (NEPA), required that environmental impact statements be filed when various private and public activities have a potential for impacting man and his environment. (17) Impact statement requirements go beyond the currently practiced cost/benefit analysis, which is often just a production (direct) impact assessment. Heretofore, indirect or second round economic and social effects of consequence affecting other national goals were seldom counted.

Excitation Of Source Electromagnetic Waves At Microwave Frequencies Using Optical Techniques, M. Davarpanah

Doctoral Dissertations

"The coupling efficiencies for the excitation of surface electromagnetic waves (SEW} for both the prism and the grating techniques have been studied experimentally in the microwave frequency range. The grating experiments included studies of the SEW coupling efficiencies as functions of the frequency, the angle of incidence, the grating constant, the number of grating bars, and the position of the grating bar at which the maximum radiation field of the antenna was aimed. For the prism coupling technique, the coupling efficiency was studied as functions of the angle of incidence, the aiming point of the transmitting antenna on the prism …

A Method For Verifying The Kalman Conjecture., Charles Edward Connelly

Masters Theses

"The Kalman and Aizerman conjectures are of value because, if true, they allow the replacement of a nonlinear stability problem by an equivalent linear stability problem. However, the conjectures are not true in general. This thesis presents a method for verifying the Kalman conjecture. A theorem is also presented which extends the usefulness of the method and allows several very general results to be obtained. The method is based on an off-axis circle criterion of Cho and Narendra and a consideration of the curvature of the Nyquist locus of the transfer f unction. A table is included which summarizes the …

Verifications Of The Kalman Conjecture For Irrational Transfer Functions, D. Ronald Fannin, Charles E. Connelly

Electrical and Computer Engineering Faculty Research & Creative Works

The sufficient conditions for the Kalman conjecture to be satisfied given by Fannin and Rushing [1] are relaxed in such a way as to allow their approach to be applied to irrational transfer functions. Specific results for a class of systems containing transportation lag are presented. © 1975, IEEE. All rights reserved.

Books To Make Electronics Easy, P Mynott

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Dependence Of The Electronic Transition Moment On Internuclear Separation In Na2: A Quantum Mechanical Treatment, P. F. Williams, D. L. Rousseau

P. F. (Paul Frazer) Williams Publications

We present a quantum mechanical treatment of laser-induced atomic fluorescence from molecular sodium. It is shown that such fluorescence data may be analyzed with an ν-centroid approximation and an accurate determination of the electronic transition moment may be made.

Discrete And Diffuse Emission Following Two-Photon Excitation Of The E State In Molecular Iodine, D. L. Rousseau, P. F. Williams

P. F. (Paul Frazer) Williams Publications

We studied the fluorescence spectrum of E →B transitions in molecular iodine following two-photon absorption. Discrete re-emission lines terminating in B-state levels ranging from ν = 0 to the dissociation limit were observed in addition to a series of broad diffuse lines. These diffuse lines represent the first observation of Condon "internal diffraction” resulting from a single vibronic state, and therefore the variation of the bands directly displays the variation of the Franck-Condon factor.

Designing Hmo, An Integrated Hardware Microcode Optimizer, James O. Bondi, Paul D. Stigall

Electrical and Computer Engineering Faculty Research & Creative Works

This Paper Discusses an Algorithm for Optimizing the Density and Parallelism of Micro coded Routines in Micro programmable Machines. Besides the Algorithm itself, the Algorithm's Uses, Design Integration Problems, Architectural Requirements, and Adaptability to Conventional Machine Characteristics Are Also Discussed and Analyzed. Even Though the Paper Proposes a Hardware Implementation of the Algorithm, the Algorithm is Viewed as an Integral Part of the Entire Microcode Generation and Usage Process, from Initial High-Level Input into a Software Microcode Compiler Down to Machine-Level Execution of the Resultant Microcode on the Host Machine. It is Believed that, by Removing Much of the Traditionally …

Self-Consistent Dielectric Response Of A Quasi-One-Dimensional Metal At High Frequencies, P. F. Williams, Aaron N. Bloch

P. F. (Paul Frazer) Williams Publications

We present the results of a calculation of the frequency- and wave-vector-dependent longitudinal dielectric function of a quasi-one-dimensional electron gas. The electrons are taken to be localized to the chains and both the tight-binding and free-electron extremes are considered along the chain axis. Local-field effects are included. Dispersion curves for plasmons and single-particle-excitation spectra are presented. We find that the plasmon modes are not Landau damped and that for long wavelengths these modes have eigenfrequencies ranging continuously from the usual three-dimensional plasma frequency for propagation along the chain axis to zero for propagation perpendicular to it. Finally, we discuss the …

Optical Excitation Of Plasmons In A Quasi-One-Dimensional Conductor, P. F. Williams, M. A. Butler, D. L. Rousseau

P. F. (Paul Frazer) Williams Publications

We have carefully determined the optical spectrum of K₂Pt(CN) ₄Br_0.3 - 3H₂O near the reflectivity edge. Our data reveal, in addition to the expected monotonic background, a broad peak in ε₂ (ω) above a threshold coinciding with the zero of ε₁ (ω) near 16000 cm^-1. We assign this band to indirect excitation of plasmons. Details of the excitation of plasmons are discussed with particular attention being paid to the problems presented by the one-dimensional character of the material. It is concluded that the electronic structure of this material cannot be …

A Biquadratic Realization Using A Distributed-Lumped-Active Rc Network., James Lee Jorgensen

Electrical and Computer Engineering ETDs

A common method used to realize high-order active filters is to cascade second-order (biquadratic) and first-order filter sections, to achieve the desired voltage transfer function. First-order sections are easily realized by simple passive sections; the basic building block in this method is, therefore, a network that realizes a general biquadratic voltage transfer function (BVTF).

The Theory Of Multiple Measurements Techniques In Distributed Parameter Systems, Babajimi Claudius Okunseinde

Dissertations

A comprehensive theory of multiple measurements for the optimum on-line state estimation and parameter identification in a class of noisy, dynamic distributed systems, is developed in this study. Often in practical monitoring and control problems, accurate measurements of a critical variable are not available in a desired form or at a desired sampling rate. Rather, noisy independent measurements of related forms of the variable may be available at different sampling rates. Multiple measurements theory thus involves the optimum weighting and combination of different types of available measurements. One of the contributions of this work is the development of a unique …

Electronic Color Scanners, Kenneth Francis Hird

Graduate Research Papers

Process color photography has been continually developing for many years. In fact, color printing techniques are still benefiting, through additional sophisticated requirements, and from a discovery made about 300 years ago. At that time Sir Isaac Newton, British scientist, mathematician • and philosopher, placed a glass prism in the path of a narrow beam of sunlight entering his room through a pinhole in an opaque window shade. He determined that ordinary white light is a mixture of colored lights.

Unfortunately, in practice, ideal pigments for three-color inks do not exist and this impasse greatly complicates the job for the photo-processor. …

Synthetically-Generated Holographic Memory System Utilizing Partially Coherent Light, William A. Barrett

Dissertations

This dissertation proposes a novel form of optical ROM for the digital computer. This memory makes use of holographic techniques because of the advantages offered by holographic memories over conventional optical ones, especially with regard to dust and scratch sensitivity.

These advantages have long been recognized by workers in the field, indeed several holographic optical memories have already been proposed.

A survey of the state of the art of digital computer memories is offered in the introductory part of the thesis. Particular emphasis is placed on optical memories. A brief review of basic holographic theory is also included for reference. …

Steady State And Dynamic Performance Of Anisotropic Reluctance Motor, S. Chandrasekhara Rao

Theses

The paper deals with a special type of reluctance motor called Anisotropic rotor reluctance motor. As the name implies, advantage is taken of the internal anisotropy of the rotor magnetic structure. Axially laminated grain oriented silicon steel is used in the rotor. This unconventional configuration of assembly of rotor laminations results in a high ratio of direct axis to quadrature axis reluctance. Compared to the conventional reluctance motor, pull out torque of more than three times and a power factor as high as in an induction motor is obtained. Several motors of ratings up to 60 HP. were built and …

The Digital Multifunction Power Measuring System, Ralph Warren Shoemaker

Dissertations and Theses

The Digital Multifunction Power Measuring System is the outgrowth of a project involving the design of a prototype precision Digital Watt Transducer for the Bonneville Power Administration (BPA). A prototype Digital Watt Transducer was built and tested since no other device of the desired accuracy was commercially available. Upon partial completion of the project, another Watt Transducer did become available which was essentially identical to our development. Since we could not economically compete with the manufacturer of these Watt Transducers, our project was stopped. Over a period of several months we thought about other ways to apply the experience gained …

Asynchronous Logic Design With Flip-Flop Constraints, David Franklin Cox

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Some techniques are presented to permit the implementation of asynchronous sequential circuits using standard flip-flops. An algorithm is presented for the RS flip-flop, and it is shown that any flow table may be realized using the algorithm (the flow table is assumed to be realizable using standard logic gates). The approach is shown to be directly applicable to synchronous circuits, and transition flip-flops (JK, D, and T) are analyzed using the ideas developed. Constraints are derived for the flow tables to meet to be realizable using transition flip-flops in asynchronous situations, and upper and lower bounds on the number of …

Clean Fuel From Coal For Electric Power Generation, J. Agosta

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Several strategies have been studied and applied for the reduction of sulfur-dioxide emissions from power generation sites. These include switching to low sulfur fuels, stack gas processing, and a greater reliance upon nuclear power. One area of interest is the processing of fuel prior to combustion through the total gasification of coal to produce a fuel gas suitable for combustion in utility boilers and gas turbines. Specifically, this paper will deal with need for coal as a fuel in the generation of electric power, the production from coal of a clean power fuel gas of-approximately 150 to 200 Btu and …

Prospects For Conversion Of Solar Energy Into Electrical Power, William R. Cherry

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

In 1972, the Solar Energy Panel took a broad look at solar energy across the whole field to see just what could be done with this energy source. Maybe the era of acquiring energy without regard to cost and without regard to consequences of using it is beginning to come to a close and maybe we ought to start looking at the newer sources of energy, even though we need every bit of energy we can get from every source. I am not trying to say we don't need gas, oil, coal and nuclear energy. We are not going to …

1st Umr-Mec Conference On Energy Resources -- Entire Proceedings, University Of Missouri--Rolla

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

No abstract provided.

Locating Nuclear Power Plants Underground, Frank M. Scott

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This paper reviews some of the questions that have been asked by experts and others as to why nuclear power plants are not located or placed underground. While the safeguards and present designs make such installations unnecessary, there are some definite advantages that warrant the additional cost involved. First of all, such an arrangement does satisfy the psychological concern of a number of people and, in so doing, might gain the acceptance of the public so that such plants could be constructed in urban areas of load centers. The results of these studies are presented and some of the requirements …

Introduction -- Solar And Wind Energy, Jack L. Boone

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

In recent years the scientific community has begun to explore the many alternatives of using solar energy in terms of solar energy conversion schemes. These, in general, may be classified according to use. We can talk about solar to low-grade thermo residential heating and cooling applications. We can talk about solar to high-grade heat for such applications as steam powered generation and certain high-temperature conversion processes. We can talk about solar to electrical for either residential or for large power production installations; and we can talk about wind to electrical and this would, of course, come in both large and …

A Solar-Hydrogen Energy Conversion Scheme For Agricultural Use, R. L. Reisbig, Jack L. Boone, Gordon E. Weiss, Thomas Van Doren

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A solar energy activated system is presented which can produce hydrogen and hydrogen-derived fuels (methanol) for use on farms. The device, named "solar-kine", also can produce fertilizer (anhydrous ammonia) as a byproduct of the hydrogen. A cost analysis shows that solar-kine may be mass-producible and sold to farmers for between $7,200 and $14,700. This is equivalent to giving the fanner energy at a price of $1.79 to $3.66 per million BTU's (in 1974 dollars). Presently (Spring, 1974) regular gasoline used in tractors at 43¢ per gallon, represents a cost to the farmer of $3.77 per million BTU's. As oil-based fuels …

The Associated Electric Cooperative Energy Control System, Douglas W. Arlig

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Associated Electric Coop, installed a digital computer energy control system in 1971 to improve the economics and security of its power system operation. Since its initial implementation, the new energy control system has been undergoing a continuing evolutionary process. The addition of new data acquisition systems, improved man-machine interfaces, and the development of new, more sophisticated application programs has helped bring the system closer to its goal of reliable, secure, and economic power system operation.

This paper describes Associated's energy control system as it was originally installed, as it is currently operating today, and as it is currently envisioned to …

Interfaces Of Steam Electric Power Plants With Aquatic Ecosystems, Gerald J. Lauer, William T. Waller, Guy R. Lanza

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Growth and reproduction may be stimulated by increased temperature in the cooling system and thermal plume during seasons when ambient water temperature is less than optimum, but growth, reproduction and survival are reduced when the elevated temperatures become excessive. Some fish species congregate in the warm thermal plumes during cold seasons but are excluded from this living space by temperatures above their preference in the summer. However, the warm refuge provided by a thermal plume in cold seasons can be a death trap if a power plant shuts down suddenly and exposes the fish to cold shock exceeding their lower …

Mini-Computer Control Of Electrical Energy Demand, Thomas P. Hertel

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Electrical power demand control results in huge dollar savings for the medium to large user. Meramec Mining Company realizes an average $4,500.00 savings from an average $150,000.00 monthly charge because of demand control efforts.

This paper discusses the planning, designing, implementing, and auditing of the mini-computer system at Meramec Mining Company. No detailed discussion of the actual computer coding is included.

Monitoring And Control Of Electric Power Usage, Robert B. Webb

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

At the Armco Kansas City Works the consumption of Electrical Power is monitored and controlled by a General Purpose Computer located in the Electric Furnace Dept. This computer monitors the power used in the entire plant through the power metering system. The computer can limit the' power to the electric arc melting furnaces and in this manner control the demand level during peak hours. The computer can also detect meter failures. The computer system collects data which enables management to detect and analyze variations in electrical power consumption.

Multiregional Interactions Between Energy And Transportation, Karen R. Polenske

Applications

Because of the number and complexity of the issues that will determine the use of coal by the electric-generating plants, an important asset of policy makers will be the availability of a method of analysis that allows for quick studies of many different combinations of assumptions and policies. The present prototype study is designed to show how the multiregional input-output model can be used to investigate each different assumption and policy alternative. For this paper, the analysis has necessarily been restricted to two issues. First, the results of using regional rather than national technologies in the model are assessed. This …