Digital Commons Network^™

Fault-Tolerant Interconnection Networks For Multiprocessor Systems, Hamed Mohamed Nassar

Dissertations

Interconnection networks represent the backbone of multiprocessor systems. A failure in the network, therefore, could seriously degrade the system performance. For this reason, fault tolerance has been regarded as a major consideration in interconnection network design. This thesis presents two novel techniques to provide fault tolerance capabilities to three major networks: the Baseline network, the Benes network and the Clos network.

First, the Simple Fault Tolerance Technique (SFT) is presented. The SFT technique is in fact the result of merging two widely known interconnection mechanisms: a normal interconnection network and a shared bus. This technique is most suitable for networks …

An Intelligent Electrocardiogram Tutoring Package Ekgchallenger, Santosh K. Ananthraman

Theses

This thesis presents the development and implementation of an intelligent electrocardiogram tutoring package, namely, EKGCHALLENGER which is meant for use in medical schools to teach medical students a method of diagnosing electro cardiograms.

EKGCHALLENGER is an IBM - PC based, user friendly package. It works in two basic modes. The first is a tutorial mode wherein the user is taught the step-by-step diagnosis of electrocardiograms ( EKGs ) which are presented in order of increasing difficulty. The second is the challenger mode wherein the user is asked to diagnose EKGs which are randomly chosen from an EKG database. The diagnosis …

Rays And Beams Near The Shadow Boundary, Weixing Gao

Theses

Asymptotic techniques in wave propagation problems exhibit attractive features in computational aspects compared to numerical methods. However, they experience problems in complicated environments due to the transition regions associated with them. The transition region involving a shadow boundary in the downward refractive index profile has been investigated. The ray paths were determined solving the ray equation analytically. The Green's function due to a line source is constructed and evaluated using numerical integration (reference solution) and asymptotic techniques. Then, the field produced by the source, is synthesized, using superposition of beams generated from complex source point representation. The floating parameters such …

Schottky-Barrier Solar Cells, Surface Patterning For Efficient Light Collection, Constantinos Manolis

Theses

Different geometrical surface configurations are considered here for a Au/n-Si semiconductor Schottky-barrier solar cell to improve their light collection efficiency.

Optical and electrical properties are theoretically analyzed for two given optical wavelengths of 0.9 and 0.5 micrometers respectively.

The configurations considered are: V-shaped, Star- shaped, M-shaped, asymmetric-V-shaped, and asymmetric-M-shaped. They all show a significant improvement in the short-circuit current over a flat cell model, while the open-circuit voltage remains practically unchanged.

Computer Controlled Oxygen Bioreactor, Dinesh Sachdeva

Theses

A computer controlled oxygen bioreactor has been designed to obtain more accurate values for oxygen bioreactor requirements and to optimize oxygen productivity with respect to oxygen concentration. This study solves a specific problem relating to oxygen concentration measurement and bioreactor control. The proposed reactor system is computer controlled to insure a desired oxygen concentration supply to an oxygen consuming reaction or organism. This thesis also explains and illustrates the bioreactor and its computer control system.

The computer controller incorporates oxygen sensing, oxygen measurement and temperature measurement, Electrical circuits have been designed and built for proper signal conditioning, data acquisition, data …

Network Realizability Approach To Robust Stability Of Discrete-Time Systems Characterized By Polynomials, Sri Indran Rasiah

Theses

In system design, the coefficients of a characterizing polynomial are usually not precisely known but can be bounded from above and below by real numbers. The requirement of robust system design from the stability standpoint demands, then, the guaranteeing of the stability of a set of polynomials.

Stability theorems for continuous-time systems and discrete-time systems, are studied in this report. It is shown that one more condition has to be included into each of the theorem. The revised theorem for continuous-time systems is proved through network realizability theory. The one for discrete-time systems is, then, proved via the use of …

Electrical Insulation Screening For Reliability, Vinu Sundaresan

Theses

This thesis work includes an investigation on the use of electrical noise for the screening of dielectric sheet material for reliability. Three different high voltage insulation sheet materials, commonly used in power industry, have been studied. These are - Westinghouse Polyester resin coated glass cloth, Dupont ‘NOMEX' aramid calendared paper and a cotton rag commonly known as Fishpaper. Samples of each material have been categorized into low noise and high noise units. Subsequently, these samples were subjected to accelerated life testing.

It is seen that units having high noise are failing quicker compared to low noise units when subjected to …

Analysis On Dielectric Resonators, Xuan Tu

Theses

This dissertation deals with the studies and analysis of Dielectric Resonators (DR). A shielded dielectric iesonator structure, consisting of the substrate, the spacer, the dielectric resonator and the metallic shielding is modelled theoretically. The theoretical expressions for the resonance fields are derived by using radial-mode matching and axial mode-matching techniques. In these techniques, the structure is divided into partial regions and the fields in each pai tial region are represented in terms of a series of the appropriate modes with unknown coefficients. Matching the adjacent regions yields a system of linear or nonlinear equations — which then are solved. The …

Efficient Design Of Trellis Coded Cpfsk, Hsinhsyong Yang

Theses

In this thesis convolutional coded continuous-phase frequency shift keying (CPFSK) is studied.

CPFSK which is a subclass of continuous phase modulation ( CPM ) is a constant amplitude digital modulation scheme with very good spectral characteristics.

A new method, called matched encoding, that combines convolutional codes and CPFSK is studied. With the maximum free Euclidean distance as the optimization criterion, the best combined coded schemes were found for the same rate of the codes and given total number of states in the optimum decoder.

A different method which was suggested by Rimoldi[7], called the decomposition method, is also described in …

Image Coding With Switchable Dynamic Quantizers, Shing-Sun Yu

Theses

In this thesis, an image coding scheme based upon dynamic quantizations and Differential Pulse Code Miodulalton (DPCM) is studied for application in digital image transmission. This scheme achieves a degree of data compression, and at the same time, maintains an acceptable degraded Mean Square Error (MSE) in the reproduced image. The image to be transmitted is first divided into blocks and each block is then quantized before transmission. The dynamic quantizations including DPCM) are dynamically utilized in reducing the transmission rate while maintaining a desirable quantization noise level. Results of computer simulation of the proposed scheme demonstrate that the switchable …

Non Invasive Monitoring Of Cardiovascular Dynamics Through A Microwave Interferometer, Suresh Chakravarthi

Theses

The microwave interferometer is utilized to pick up vibrations of the anterior (front) chest wall, produced by cardiac activity. This instrument is capable of remotely measuring the vibrations at distances up to four feet through clothing, by using low level microwave energy at 9.3 Ghz. The vibrations picked up from subjects are filtered, and processed through a PC to correlate with EKG signals, and thereby evaluate the instrument as a non-invasive, non-contacting cardiac monitor.

The subjects lie on their back with the microwave energy illuminating their chest, and their cardiovascular dynamics are recorded simultaneously with EKG signals. The EKG is …

One-Dimensional Parametric Inverse Scattering For Lossless Dispersive Media, Frank Gangi

Theses

In this thesis, the effects of high frequency noise on a perturbational inversion algorithm for a stratified dispersive medium are investigated. It is shown that the perturbational algorithm becomes unstable under high frequency noise. The physical origin of this instability is discussed.

In order to enhance the robustness of the perturbational inverse scattering solution, a parametric inversion algorithm is implemented. The improvement by the use of a parametric inversion is given quantitatively by the profile-to-error ratio (PER). Examples of the two-pole and the three-pole reflection coefficients are compared and contrasted.

Modelling And Parameter Estimation In Clinical Electrooculography, Shengche Hsu

Theses

The Corneoretinal potential (CRP) was discovered in 1848. Its response to changes in light intensity can provide information relevant in the diagnosis of some retinal degenerative disorders. The indirectly measured CRP is referred to as electro-oculography (EOG). A system for automatic data acquisition and modelling, providing graphic presentation, data processing and file management, has been developed. A linear feedback model is proposed to represent the dynamics of the EOG signal. Model parameters are estimated by the nonlinear least-square method. The effect of measurement time on the reliability of parameter estimation is discussed.

Csma/Cd Lan Performance : Modeling And Simulation In Csim, Nanda K. Kanuri

Theses

A simulation model to analyze the performance of CSMA/CD protocol is developed. CSIM, a process oriented simulation language, is used. Performance measures such as throughput, average delay and maximum delay per packet are presented. System performance is analyzed for different loads, number of stations, and network lengths, with packet length as parameter. By trading off the throughput and delay time, an optium packet length can be selected from simulated performance curves. A general scheme for MAC protocols modeling is provided.

A Cmos Robotic Lan Interface Integrated Circuit Design, Yong-Bin Kim

Theses

This thesis describes the design including specification, schematics,logic and circuit simulation, and standard cell layout for a CMOS mixed-mode I.C. for interfacing sensors into a robotics local area network. The network accepts up to 256 interface chips as nodes in each area. A simple network protocol permits acquisition of digital data from the interface nodes through gateways into ARCNET and MAP.

The sensor chip interfaces directly from analog signals of range 0-1V and 0-20mV. It contains an 8-bit ADC. The application I.C. interfaces to sensors for pressure, tactile stress, humidity, temperature, etc.

Each of the sensor interface node I.C.s is …

Visual System Modeling And System Response Analysis, Zhongquan Li

Theses

Based on the anatomical structure, a structural model of the visual system was established. System responses of different stimulations were analyzed based on the model. More extensive study was made on the system impulse response. A mathematical model with parameters representing prominent process components was developed to represent the system response in a compact form and the parameters were statistically studied to correlate to the real physiological characteristics of the visual system. The parameters of the model were used to fit the system intensity response function. The result shows that it is a more quantitative way to construct the system …

A Dynamic Cmos Programmable Logic Device, Praveen K. Parvathala

Theses

This thesis presents the design of a Dynamic CMOS Programmable Logic Device chip (NJIT PLD). The main feature of the chip is its reconfigurability and the provision of a processor interface which makes the chip capable of performing coprocessor like functions. The chip has been designed to be used with the Intel 8088 microprocessor, but may also find stand-alone applications. Provision is made for dynamic reconfiguration of the chip. The configuration data for the chip comes from a serial PROM, to which the chip sends a synchronizing clock. The NJIT PLD is a high performance, digital integrated circuit. It has …

The Applicability Of Parametric Inverse Scattering For Optical Waveguides With Imperfect Boundaries, Hyoung Jin Choi

Theses

In this thesis, the applicability of an inverse scattering technique for an optical waveguide with imperfect boundaries is investigated. The inversion of imperfect boundaries of waveguides is different from usual inverse scattering algorithms because only eigenmodes can propagate in a waveguide. We suggest a parametric inversion method based on the first-order coupled mode equation. The validity and usefulness of the method are demonstrated using examples of periodic and almost periodic imperfect boundaries.

Integrated Voice/Data Services On Multihop Radio Networks, Chialun Lu

Theses

Integrated voice/data is the first step toward Integrated Services Digital Networks (ISDN). Various techniques have been proposed and analyzed for multiplexing voice and data over a large bandwidth channel. Network efficiency is what we are most concerned about. In this paper, we address the problem of determining optimal access policies for a tandem ISDN network by using Dynamic Programming. Computer simulation shows that optimal policy minimizes the data delay.

Nonlinear Variants Of The Least Mean Square (Lms) Algorithm, John George Van Saders

Theses

Adaptive systems using the LMS algorithm or its variants usually require bilinear correlation multipliers with high dynamic range and large bandwidth. The class of LMS-type algorithms utilizing zero-memory limiters (on one or both correlation multiplier inputs) to reduce dynamic range are examined. The correlator limiters may be included to simplify the hardware implementation or may arise due to limited dynamic range of the loop components. The application of a theorem due to Price provides a technique for simplifying the analysis, which otherwise might be extremely difficult. The analysis provides closed-form expressions for the mean weight convergence behavior, permitting examination of …

Distributed Data Collection System Based On Hierarchical Network, Harish Mahindrakar

Theses

On line data collection systems are essential in order to satisfy the requirements for real-time applications. Typical applications are computer integrated manufacturing, security control, hourly wage calculations, human resources management. On line data collection system makes it possible to closely monitor and track different operations with more accuracy. On line data collection systems eliminate redundant work, save time and money.

If the distributed system is based on a multicontroller, it becomes really cost effective solution to build such a system.

This effort is the design of a distributed multicontroller system, required in a data collection system. A hierarchical network is …

Nonlinear, Metal-Clad Optical Waveguide, Bhavesh Patel

Theses

Planar optical waveguides consisting of different types of films including nonlinear films with metal cladding have been studied theoretically. Ideal metal cladding with σ = ∞ and nonideal metal cladding with σ ≠ ∞, that is, with complex refractive index is considered to get electric field and wave number for TE₀ mode. For nonlinear material, approximate solution is derived in a series form using Rayleigh-Schrodinger method. The appropriate eigenvalue equations are solved by Newton-Raphson iteration method. For self-focusing media in the center, the propagation constant increases with increasing power and with self-focusing media in the cladding the propagation constant …

Reduced Complexity Receivers For Trellis Coded Modulations Via Punctured Trellis Codes, Bonchul Koo

Theses

We introduce a new concept, called matched punctured trellis encoding, that simplifies the complexity of Maximum Likelihood Sequence Estimation (MLSE) receivers for combined trellis encoding and modulations with memory. Matched punctured trellis encoding is applied to tamed frequency modulation (TFM) which is a bandwidth efficient correlative - FM scheme. TFM finds applications in satellite, microwave radio, and mobile communications.

Our approach is based on puncturing a rate - 1/2 matched convolutional code to obtain a rate - 2/3 mismatched code. A matched code is one that produces trellis coded modulations of minimum complexity. Puncturing these codes to obtain mismatched codes …

Performance Enhancement & Fault Detection Of Cmos Dynamic Logic For Vlsi, Ashok Arunachalum

Theses

New CMOS dynamic latches are designed which can be used along with conventional dynamic circuits to realize fast pipelined dynamic logic. Also a new method is described for detecting the difficult CMOS Non-classical faults viz. stuck open and stuck on faults. The conventional Domino logic is redesigned to make all the stuck open and stuck on faults detectable.

Firmware Toolkit For Larynx Synchronous D.S.P., Shih-Chieh Su

Theses

During the past ten years, digital signal processing has been an extremely active and dynamic field. Advances in integrated circuit technology and in processor architecture have greatly enlarged the scope of the technical areas to which digital signal processing techniques can be applied. Research in fundamental signal processing techniques and algorithms has led to dramatic improvements in the efficiency of signal processing systems.

This thesis creates a fast and cheap DSP package for 8052AH-BASIC. This is a useful and potential package when we apply research in speech science and medical diagnostics. It exploits the latest software-in-silicon technology to create a …

Microprocessor Based Protection Of Induction Motors Using Thermal, Mechanical, And Skin Effect Electrical Models To Predict Motor Temperature Rise, Nader S. Moharari

Masters Theses and Doctoral Dissertations

This study investigates induction motor performance during a variety of system and load conditions. A computer simulation is used to characterize the motor behavior during normal operation, lockedrotor case, high inertia loading, and overloading conditions. Motor temperature at critical points is estimated. A microprocessor protection scheme based on motor temperature is proposed. Previous studies assume a linear relationship between motor impedance and frequency when calculating motor temperature. In this study an electrical model, based on Maxwell's equations, is used in conjunction with a mechanical model, to represent the motor during dynamic state conditions. The model accounts for the rotor bar …

Optical- And Magnets-Optical Measurements Using A Variable Angle Of Incidence Spectroscopic Ellipsometer: Application To Dyco Multilayer, William A. Mcgahan, Z. S. Shan, Alan M. Massengale, Thomas E. Tiwald

Department of Electrical and Computer Engineering: Faculty Publications

We have extended the technique of variable angle spectroscopic ellipsometry to measurement of the magneto-optical effects as a function of wavelength and angle of incidence and field strength. Results on DyCo multilayers are reported.

A Finite State Machine Synthesizer, Jiuling Liu

Dissertations and Theses

This thesis presents a Finite State Machine (FSM) Synthesizer developed at Portland State University. The synthesizer starts from a high level behavioral description, in which no states are specified, and generates the lower level FSM descriptions for simulation and physical layout generation.

Optical-Absorption Edge And Disorder Effects In Hydrogenated Amorphous Diamondlike Carbon Films, T. Datta, John A. Woollam, W. Notohamiprodjo

Department of Electrical and Computer Engineering: Faculty Publications

Optical absorption (~1–5 eV) in rf-deposited hydrogenated (20–40 at. %) amorphous “diamondlike” carbon films has been studied as a function of heat treatment. For E >~ 2.5 eV a Tauc behavior is exhibited. Optical band gaps E_g are E₀, the width of the tail, is quantitatively explained in terms of the annealing temperature T_H. Increasing T_H (<700 >K) reduces the hydrogen content, lowers E_g, and appears to harden the films. E_g is determined to be a linear function of E₀. Additional analysis was performed in terms of a divergence …

Performance Modeling And Enhancement For The Atamm Data Flow Architecture, Sukhamoy Som

Electrical & Computer Engineering Theses & Dissertations

Algorithm To Architecture Mapping Model (ATAMM) is a new marked graph model from which the rules for data and control flow in a homogeneous, multicomputer, data flow architecture may be defined. This research is concerned with performance modeling and performance enhancement for periodic execution of large-grain, decision-free algorithms in such an ATAMM defined architecture. Performance measures and bounds are established. Algorithm transformation techniques are identified for performance enhancement and reduction of computing element requirements. Operating strategies are developed for optimum time performance and for sub-optimum time performance under limited availability of computing elements. An ATAMM simulator is used to test …